u-boot/configs/ids8313_defconfig
Mario Six ff3bb0c435 mpc83xx: Get rid of CONFIG_83XX_CLKIN
MPC83xx uses CONFIG_83XX_CLKIN instead of CONFIG_SYS_CLK_FREQ to set the
system clock. To migrate the architecture, we can replace
CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ.

To do this
* replace all occurrences of CONFIG_83XX_CLKIN with CONFIG_SYS_CLK_FREQ
* set CONFIG_SYS_CLK_FREQ to the old value of CONFIG_83XX_CLKIN in all
  MPC83xx config files

Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21 07:52:06 +02:00

55 lines
1.4 KiB
Plaintext

CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0xFFF00000
CONFIG_SYS_CLK_FREQ=66000000
CONFIG_MPC83xx=y
CONFIG_TARGET_IDS8313=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_IMAGE_FORMAT_LEGACY=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=1
CONFIG_MISC_INIT_R=y
CONFIG_VERSION_VARIABLE=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Enter password - autoboot in %d seconds...\n"
CONFIG_AUTOBOOT_DELAY_STR="ids"
CONFIG_CMD_IMLS=y
CONFIG_CMD_ENV_FLAGS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SPI=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_SNTP=y
CONFIG_CMD_DATE=y
CONFIG_CMD_JFFS2=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=ff800000.flash,nand0=e1000000.flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=ff800000.flash:7m(dum),768k(BOOT-BIN),128k(BOOT-ENV),128k(BOOT-REDENV);e1000000.flash:-(ubi)"
CONFIG_CMD_UBI=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_BOOTCOUNT_I2C=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x9
# CONFIG_MMC is not set
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_PROTECTION=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_PHY_MARVELL=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
# CONFIG_PCI is not set
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_MPC8XXX_SPI=y
CONFIG_OF_LIBFDT=y