11466 lines
372 KiB
Plaintext
11466 lines
372 KiB
Plaintext
commit 79f240f7ecc0506b43ac50d1ea405ff6540d4d57
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Aug 16 22:52:39 2007 -0500
|
|
|
|
lib_ppc: make board_add_ram_info weak
|
|
|
|
platforms wishing to display RAM diagnostics in addition to size,
|
|
can do so, on one line, in their own board_add_ram_info()
|
|
implementation.
|
|
|
|
this consequently eliminates CONFIG_ADD_RAM_INFO.
|
|
|
|
Thanks to Stefan for the hint.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 815b5bd5b18569917c3e04b9757511e6ed23b9f6
|
|
Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
|
|
Date: Fri Aug 17 12:43:44 2007 +0900
|
|
|
|
PCI_READ_VIA_DWORD_OP: Fix *val uninitialized bug
|
|
|
|
This patch has been sent on:
|
|
- 6 Jun 2007
|
|
|
|
Many users of PCI config read routines tend to ignore the function
|
|
ret value, and are only concerned about the contents of *val. Based
|
|
on this, pci_hose_read_config_{byte,word}_via_dword should initialize
|
|
the *val on dword read error.
|
|
|
|
Without this fix, for example, we'll go on scanning bus with vendor or
|
|
header_type uninitialized. This brings many unnecessary config trials.
|
|
|
|
Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
|
|
|
|
commit 26667b7fa05a8bf2fc65fb9f3230b02b1a10c367
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Aug 18 14:37:52 2007 +0200
|
|
|
|
ColdFire: Fix some remaining problems with CFG_CMD_
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 8280f6a1c43247616b68224675188e5ccd124650
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Aug 18 14:33:02 2007 +0200
|
|
|
|
Coding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4a442d3186b31893b4f77c6e82f63c4517a5224b
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Aug 16 19:23:50 2007 -0500
|
|
|
|
ColdFire: Add M5235EVB Platform for MCF523x
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 4cc1cd5941827a04cf5c51a07fcc42e8945894aa
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Fri Aug 17 09:30:00 2007 -0500
|
|
|
|
mpc83xx: fix typo in DDR2 programming
|
|
|
|
introduced in the implement board_add_ram_info patch as I was cleaning out the
|
|
magic numbers. sorry.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit e58fe95784d2514fc9c21028dc59f2b319a35d80
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Aug 16 22:53:09 2007 -0500
|
|
|
|
mpc83xx: move freescale boards to boards/freescale
|
|
|
|
includes build fixes.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 5aa4ad8d8e7e9468219990c7875d5fdc9e962f47
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Aug 16 22:52:59 2007 -0500
|
|
|
|
mpc83xx: suppress unused variable 'val8' warning
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit bbea46f76f767b919070b4829bf34c86bd223248
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Aug 16 22:52:48 2007 -0500
|
|
|
|
mpc83xx: implement board_add_ram_info
|
|
|
|
add board_add_ram_info, to make memory diagnostic output more
|
|
consistent. u-boot banner output now looks like:
|
|
|
|
DRAM: 256 MB (DDR1, 64-bit, ECC on)
|
|
|
|
and for boards with SDRAM on the local bus, a line such as this is
|
|
added:
|
|
|
|
SDRAM: 64 MB (local bus)
|
|
|
|
also replaced some magic numbers with their equivalent define names.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 14778585d1389d86d5846efec29e5fce892680ce
|
|
Author: Tony Li <tony.li@freescale.com>
|
|
Date: Fri Aug 17 10:35:59 2007 +0800
|
|
|
|
mpc83xx: Split PIB init code from pci.c and add Qoc3 ATM card support
|
|
|
|
The patch split the PIB init code from pci.c to a single file board/freescale/common/pq-mds-pib.c
|
|
And add Qoc3 ATM card support for MPC8360EMDS and MPC832XEMDS board.
|
|
|
|
Signed-off-by Tony Li <tony.li@freescale.com>
|
|
|
|
commit 8ae158cd87a4a25722b27835261b6ff0fa2aa6a7
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Aug 16 15:05:11 2007 -0500
|
|
|
|
ColdFire: Add M54455EVB for MCF5445x
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit a1436a842654a8d3927d082a8ae9ee0a10da62d7
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Aug 16 13:20:50 2007 -0500
|
|
|
|
ColdFire: Add M5253EVBE platform for MCF52x2
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit a605aacd8324094199402816cc6d9124aba57b8d
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Aug 16 05:04:31 2007 -0500
|
|
|
|
ColdFire: Add M5249EVB platform for MCF52x2
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit f28e1bd9daa6de5eb33ae4822bda6b008ccb4e9e
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 20:32:06 2007 -0500
|
|
|
|
ColdFire: Update Freescale MCF52x2 platforms
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 870470dbf6f4bb9864e0d97aeedbc17c167c6d1c
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:55:10 2007 -0500
|
|
|
|
ColdFire: Update EB+MCF-EV123 platform
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit aa93d859d9b1fcd8eea52d51b06e86c38f72111b
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:46:38 2007 -0500
|
|
|
|
ColdFire: update TASREG platform for MCF52x2
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit a9505510bf56a9b5558248dd8b73ec9d9a1556a2
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:45:51 2007 -0500
|
|
|
|
ColdFire: update r5200 platform for MCF52x2
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 6cfd3c7bc813fb317ab7c0781f0d1874b1c0877c
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:43:20 2007 -0500
|
|
|
|
ColdFire: idmr platform MCF52x2 update
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 6706424d0bb851fb52af00cd1c3301e91ee7f2b0
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:41:06 2007 -0500
|
|
|
|
ColdFire: cobra5272 platform for MCF52x2 update
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 56115665b4a64c10c01440c57749b265e0908fa4
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:38:15 2007 -0500
|
|
|
|
ColdFire: MCF52x2 Header files update
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 83ec20bc4380eebddfde45da6e3a69a92d4db21d
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 19:21:21 2007 -0500
|
|
|
|
ColdFire: MCF52x2 update
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit f52e78304dcc0ac459c0ea1fa5be275c7d1642cf
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 18:46:11 2007 -0500
|
|
|
|
ColdFire: MCF5329 update cache
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 7171977fb8fd77cfb6676953fa9a05789c450513
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 15:40:20 2007 -0500
|
|
|
|
ColdFire: MCF5329 header file clean up
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit ab77bc547ba561c25ea34457ed17aa0b2f7c2723
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Wed Aug 15 15:39:17 2007 -0500
|
|
|
|
ColdFire: MCF5329 Update and cleanup
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 10327dc5541f947c0cf7e31fef86c4706169607a
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Thu Aug 16 16:35:02 2007 -0500
|
|
|
|
Add CONFIG_HAS_ETH0 to all boards with TSEC
|
|
|
|
The 85xx code now relies on CONFIG_HAS_ETH0 to determine whether
|
|
to update TSEC1's device-tree node, so we need to add it
|
|
to all the boards with TSECs. Do this for 83xx and 86xx, too,
|
|
since they will eventually do something similar.
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit d64ee908a1b525e5bb2b4cbeb5c449ad6a469666
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Thu Aug 16 15:05:04 2007 -0500
|
|
|
|
Update MPC8544 DS PCI memory map
|
|
|
|
The PCIe bus that the ULI M1575 is connected to has no possible way of
|
|
needing more than the fixed amount of IO & Memory space needed by the ULI.
|
|
|
|
So make it use far less IO & memory space and have it use the shared LAW. This
|
|
free's up a LAW for PCIe1 IO space. Also reduce the amount of IO space needed
|
|
by each bus.
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit ea5877e31ed63ade948fd1293895ec23fe01472e
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Thu Aug 16 11:01:21 2007 -0500
|
|
|
|
Fix up some fdt issues on 8544DS
|
|
|
|
It looks like we had a merge issue that duplicated a bit of code
|
|
in ft_board_setup. Also, we need to set CONFIG_HAS_ETH0 to get
|
|
the MAC address properly set in the device tree on boot for TSEC1
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit 07bc20560cb9d3d186cca268c05c82762e8c55ad
|
|
Author: Niklaus Giger <niklaus.giger@netstal.com>
|
|
Date: Thu Aug 16 15:16:03 2007 +0200
|
|
|
|
PPC4xx:HCU4/5 cleanup
|
|
|
|
Minor cleanups to confirm to the u-boot coding style.
|
|
Some german expressions -> english.
|
|
HCU5 enforces a unique IP adress for a given slot in the rack.
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 1e6b07c64967c1eb2cd84faa4c32bf2a769bc8eb
|
|
Author: Niklaus Giger <niklaus.giger@netstal.com>
|
|
Date: Thu Aug 16 15:16:02 2007 +0200
|
|
|
|
PPC4xx:HCU4/5 cleanup ecc/sdram init
|
|
|
|
Make ecc initialisation robust, as DDR2-ECC errors may be generated
|
|
while zeroing the RAM.
|
|
|
|
Return 16 bytes (a cacheline) less than the available memory, as the
|
|
board and/or PPC440EPx might have problems accessing the last bytes.
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit d35b508a55508535b6e8445b718585d27df733d3
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:29:56 2007 -0500
|
|
|
|
fdt: suppress unused variable 'bd' warning
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 82bd9ee77490588d4da785d75829ca63d0176baf
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Aug 15 20:06:50 2007 -0500
|
|
|
|
Fix warnings from of_data copy fix
|
|
|
|
Forgot to cast of_flat_tree to ulong.
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 7613afda77d5eec0f47d303025b0c661b70e4c73
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Aug 15 20:03:44 2007 -0500
|
|
|
|
Don't wait for disconnected TSECs
|
|
|
|
The TSEC driver's PHY code waits a long time for autonegotiation to
|
|
complete, even if the link is down. The PHY knows the link is
|
|
down or up before autonegotiation completes, so we can short-circuit
|
|
the process if the link is down.
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit b96c83d4ae475a70ef2635cd0e748174c44c8601
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Aug 15 20:03:34 2007 -0500
|
|
|
|
Fix numerous bugs in the 8568 UEC support
|
|
|
|
Actually, fixed a large bug in the UEC for *all* platforms.
|
|
How did this ever work?
|
|
|
|
uec_init() did not follow the spec for eth_init(), and returned
|
|
0 on success. Switch it to return the link like tsec_init()
|
|
(and 0 on error)
|
|
|
|
The immap for the 8568 was defined based on MPC8568, rather than
|
|
CONFIG_MPC8568
|
|
|
|
CONFIG_QE was off
|
|
|
|
CONFIG_ETHPRIME was set to "Freescale GETH". Now is "FSL UEC0"
|
|
|
|
Fixed a comment about the ranges for CONFIG_ETHPRIME if TSEC_ENET is
|
|
enabled
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 3a79013e2adda53332dfd0b511066a805e929a9d
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Aug 15 20:03:25 2007 -0500
|
|
|
|
Define tsec flag values in config files
|
|
|
|
The tsec_info structure and array has a "flags" field for each
|
|
ethernet controller. This field is the only reason there are
|
|
settings. Switch to defining TSECn_FLAGS for each controller
|
|
in the config header, and we can greatly simplify the array, and
|
|
also simplify the addition of future boards.
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit ec7238229507e7f47533a611ea8c53319d234cf3
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Aug 15 20:03:13 2007 -0500
|
|
|
|
Add support for building all boards with a TSEC
|
|
|
|
Changes to the TSEC driver affect almost all 83xx, 85xx, and 86xx boards.
|
|
Now we can do a MAKEALL test on all of them!
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 10aaf716cb0dc6614df54ef78bed5144afd23ef8
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Aug 15 17:30:56 2007 -0500
|
|
|
|
Fix of_data copying for CONFIG_OF_FLAT_TREE-using boards
|
|
|
|
The fix, "Fix where the #ifdef CFG_BOOTMAPSZ is placed"
|
|
neglected to *also* put the code inside the similar #ifdef
|
|
for CONFIG_OF_FLAT_TREE.
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 78f9fef7f406078c8bf7191e665a73f795157746
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Wed Aug 15 15:46:46 2007 -0500
|
|
|
|
mpc885ads: Don't define CONFIG_BZIP2.
|
|
|
|
bzip2 requires a significant chunk of malloc space, and there isn't
|
|
enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area
|
|
and a downloaded image at 0x400000.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit 002275a3ed8b114885f6702d6d544d0780dfe689
|
|
Author: Michal Simek <Monstr@seznam.cz>
|
|
Date: Thu Aug 16 08:54:10 2007 +0200
|
|
|
|
Bios emulator - fix microblaze toolchain problem
|
|
|
|
microblaze CPU have problem with bios_emulator code.
|
|
Microblaze toolchain doesn't support PRAGMA PACK.
|
|
|
|
Signed-off-by: Michal Simek <monstr@monstr.eu>
|
|
|
|
commit a5a38f4fd7e5366d706ff6a985f9b6715ddbc98b
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Aug 16 11:51:04 2007 +0200
|
|
|
|
Minor Coding Style fix; Update CHANGELOG file.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 8fb6e80c06849e3013ac5c9350d8ed9e52967991
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Aug 16 11:21:49 2007 +0200
|
|
|
|
ppc4xx: Remove #warning in esd auto_update.c
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2d78074d2e806edc380c1464eb9e5df335ece65e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 22 17:32:28 2007 +0200
|
|
|
|
ppc7xx: Update CPCI750 board
|
|
|
|
This small CPCI750 update extends the board specific command
|
|
"show_config" to display the Marvell strapping registers and
|
|
extends the PCI IDE controller.
|
|
|
|
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9de469bd960cc1870bb40d6672ed42726b8b50d7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Aug 16 10:18:33 2007 +0200
|
|
|
|
ppc4xx: Only enable POST FPU test on Sequoia and not Rainier
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6da0c5bd4a53e40eb4f7eb72a4c051ecabad783c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Aug 16 09:54:51 2007 +0200
|
|
|
|
Add missing rainier (PPC440GRx) target to MAKEALL and MAINTAINERs files
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 02ba7022f62bb75908296c58c63866e1d294b69a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Aug 16 09:52:29 2007 +0200
|
|
|
|
ppc4xx: Update Sequoia/Rainier bootstrap command
|
|
|
|
As suggested by David Mitchell, here an update for the Sequoia/Rainier
|
|
bootstrap command.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 35cc4e4823668e8745854899cfaedd4489beb0ef
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:30:39 2007 -0500
|
|
|
|
mpc83xx: enable libfdt by default on freescale boards
|
|
|
|
this enables libfdt code by default for the
|
|
freescale mpc8313erdb, mpc832xemds, mpc8349emds,
|
|
mpc8349itx and gp boards.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 3fde9e8b22cfbd7af489214758f9839a206576cb
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:30:33 2007 -0500
|
|
|
|
mpc83xx: migrate remaining freescale boards to libfdt
|
|
|
|
this adds libfdt support code for the freescale
|
|
mpc8313erdb, mpc832xemds, mpc8349emds, mpc8349itx,
|
|
and gp boards.
|
|
|
|
Boards remain compatible with OF_FLAT_TREE.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 6a16e0dfcc4119b46adb1dce2d6c8fb3c5d108e1
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:30:26 2007 -0500
|
|
|
|
mpc83xx: move common /memory node update mechanism to cpu.c
|
|
|
|
also adds common prototypes to include/common.h.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 8f9e0e9f339aee4ce31a338d5f27356eb5457f85
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:30:19 2007 -0500
|
|
|
|
mpc83xx: remaining 8360 libfdt fixes
|
|
|
|
PCI clocks and QE frequencies weren't being updated, and the core clock
|
|
was being updated incorrectly. This patch also adds a /memory node if
|
|
it doesn't already exist prior to update.
|
|
|
|
plus some cosmetic trimming to single line comments.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit f4b2ac5ed9aaff9920d487bff8a59696c083a524
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:30:12 2007 -0500
|
|
|
|
mpc83xx: fix UEC2->1 typo in libfdt setup code
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 19fa1c35368484d4ed10ddce8a7793c21862e3a3
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Aug 15 22:30:05 2007 -0500
|
|
|
|
mpc83xx: add MAINTAINER and MAKEALL entries for the mpc8323erdb
|
|
|
|
and reorder the existing 83xx maintainers alpha.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 30b52df9e906bf0e465916c2c6bb5192b438e0b8
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 15 11:55:35 2007 -0500
|
|
|
|
86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
|
|
|
|
Remove a leftover in net/tftp.c while we're at it.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4ce917742b1e48faa9bf9a9757545e56fb4cfe44
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 15 12:20:40 2007 -0500
|
|
|
|
Move the MPC8641HPCN board under board/freescale.
|
|
|
|
Minor path corrections needed to ensure buildability.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8662577fe36fdb6a44b55b998d9daac6392a736a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 15 11:46:22 2007 -0500
|
|
|
|
86xx: Fix lingering CFG_CMD_* references in sbc8641d.h
|
|
|
|
Remove a leftover in net/tftp.c while we're at it.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 210f463c71917b7a4495c2103c228b9c179ae64d
|
|
Author: Jerry Van Baren <gvb.uboot@gmail.com>
|
|
Date: Wed Aug 15 11:13:15 2007 -0400
|
|
|
|
Fix where the #ifdef CFG_BOOTMAPSZ is placed.
|
|
|
|
Commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924 "Fix initrd/dtb
|
|
interaction" put the new code outside of the #if defined(CONFIG_OF_LIBFDT)
|
|
when it should have gone inside of the conditional. As a result, it
|
|
broke non-LIBFDT board builds.
|
|
|
|
Also added a missing "not." to the comment.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 0e19209767194a97cec6d93dba9e64d1da8d548e
|
|
Author: Niklaus Giger <niklaus.giger@netstal.com>
|
|
Date: Wed Aug 15 12:14:23 2007 +0200
|
|
|
|
PPC4xx:HCU4/5-Board fix compile warning
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 594e79838ce5078a90d0c27abb2b2d61d5f8e8a7
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Tue Aug 14 14:06:45 2007 -0500
|
|
|
|
Fix malloc size error in ahci_init_one.
|
|
|
|
Typically this causes scsi init to corrupt the
|
|
devlist and break the coninfo command.
|
|
Fix a compiler size warning.
|
|
|
|
Signed-off-by: Jason Jin <jason.jin@freescale.com>
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit b361acd64fd2525c081b9b288b0804efe209c0e9
|
|
Author: ksi@koi8.net <ksi@koi8.net>
|
|
Date: Tue Aug 14 10:02:16 2007 -0700
|
|
|
|
TI DaVinci - fix unsupported %hhx format
|
|
|
|
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
|
|
|
|
commit f01dbb5424a81453c81190dd30e945891466f621
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Aug 14 18:42:36 2007 +0200
|
|
|
|
Coding style cleanup. Update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 073e1b509980cefe6f53c2d7fbbcd135df1e3924
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue Aug 14 10:32:59 2007 -0500
|
|
|
|
Fix initrd/dtb interaction
|
|
|
|
The original code would wrongly relocate the blob to be right before
|
|
the initrd if it existed. The blob *must* be within CFG_BOOTMAPSZ,
|
|
if it is defined. So we make two changes:
|
|
|
|
1) flag the blob for relocation whenever its address is above BOOTMAPSZ
|
|
|
|
2) If the blob is being relocated, relocate it before kbd, not initrd
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit e54b970173769307a116bd34028b6d0c2eea2a4e
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Aug 14 15:40:00 2007 +0100
|
|
|
|
Supply spi interface in at45.c
|
|
|
|
commit 4ce846ec59f36b85d6644a769690ad3feb667575
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 14 15:12:01 2007 +0200
|
|
|
|
POST: Fix merge problem
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 429d9571f60631ae8a2fe12b11be4c75b0c2b37c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 14 15:03:17 2007 +0200
|
|
|
|
Coding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 779e975117a75e91fcebe226a63104dbfb924ab1
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 14 14:44:41 2007 +0200
|
|
|
|
ppc4xx: Add initial Zeus (PPC405EP) board support
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit c5a172a5fd636c12467429e3f7910e53773979c6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 14 14:41:55 2007 +0200
|
|
|
|
POST: Add option for external ethernet loopback test
|
|
|
|
When CFG_POST_ETHER_EXT_LOOPBACK is defined, the ethernet POST
|
|
is not done using an internal loopback connection, but by assuming
|
|
that an external loopback connector is plugged into the board.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit eb2b4010ae426245172988804ee8d9193fb41038
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 14 14:39:44 2007 +0200
|
|
|
|
POST: Add ppc405 support to cache and UART POST
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 0c42f36f15074bd9808a7dbd7ef611fad9bf537c
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Aug 14 10:46:32 2007 +0100
|
|
|
|
Replace lost end of at45.c.
|
|
|
|
commit 65d7ada64557e76094b4fd3bad30a0f18f5fb2b2
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Aug 14 10:30:06 2007 +0100
|
|
|
|
Update Makefiles for merged and split at45.c.
|
|
|
|
commit 3454cece2db57cb9eb7087995f7e73066a163f71
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Aug 14 10:21:06 2007 +0100
|
|
|
|
Delete the merged files.
|
|
|
|
commit dcbfd2e5649f97aa04fbbc6ea2b008aa4486e225
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Aug 14 10:14:05 2007 +0100
|
|
|
|
Add the files.
|
|
|
|
commit d4fc6012fd0a5c211b825691f44b06f8032c0551
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Aug 14 10:10:52 2007 +0100
|
|
|
|
Add MACH_TYPE records for several AT91 boards.
|
|
Merge to two at45.c files into a common file, split to at45.c and spi.c
|
|
Fix spelling error in DM9161 PHY Support.
|
|
Initialize at91rm9200 board (and set LED).
|
|
Add PIO control for at91rm9200dk LEDs and Mux.
|
|
Change dataflash partition boundaries to be compatible with Linux 2.6.
|
|
|
|
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
|
|
Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
|
|
|
|
commit 4ef35e53c693556c54b0c22d6f873de87bade253
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Aug 14 09:54:46 2007 +0200
|
|
|
|
Coding style cleanup, update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 85eb5caf6b906f7ec5b54814e8c7c74f55986bb7
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Aug 14 09:47:27 2007 +0200
|
|
|
|
Coding style cleanup; rebuild CHANGELOG
|
|
|
|
commit 7f3f2bd2dc08e0b05e185662ca2e2d283757104a
|
|
Author: Randy Vinson <rvinson@linuxbox.(none)>
|
|
Date: Tue Feb 27 19:42:22 2007 -0700
|
|
|
|
85xxCDS: Add make targets for legacy systems.
|
|
|
|
The PCI ID select values on the Arcadia main board differ depending
|
|
on the version of the hardware. The standard configuration supports
|
|
Rev 3.1. The legacy target supports Rev 2.x.
|
|
|
|
Signed-off-by Randy Vinson <rvinson@mvista.com>
|
|
|
|
commit e41094c7e38177c755fbd9b182018069614f080d
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue Aug 14 01:50:09 2007 -0500
|
|
|
|
85xxCDS: Enable the VIA PCI-to-ISA bridge.
|
|
|
|
Author: Randy Vinson <rvinson@linuxbox.(none)>
|
|
|
|
Enable the PCI-to-ISA bridge in the VIA Southbridge located on the
|
|
Arcadia main board.
|
|
|
|
Signed-off-by: Randy Vinson <rvinson@mvista.com>
|
|
Signed-off-by: York Sun <yorksun@freescale.com>
|
|
|
|
commit da9d4610d76e52c4d20a8f3d8433439a7fcf5b71
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue Aug 14 00:14:25 2007 -0500
|
|
|
|
Add support for UEC to 8568
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit c59e4091ffe0148398b9e9ff14a019ea038b7432
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Tue Jun 19 14:18:34 2007 -0400
|
|
|
|
Add PCI support for MPC8568MDS board
|
|
|
|
This patch is against u-boot-mpc85xx.git of www.denx.com
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com>
|
|
|
|
commit d111d6382c99fdea08c2312eeeae8786945e189a
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Tue Jun 19 14:18:32 2007 -0400
|
|
|
|
Empirically set cpo and clk_adjust for mpc85xx DDR2 support
|
|
|
|
This patch is against u-boot-mpc85xx.git of www.denx.com
|
|
|
|
Setting cpo to 0x9 for frequencies higher than 333MHz is verified on
|
|
both MPC8548CDS board and MPC8568MDS board, especially for supporting
|
|
533MHz DDR2.
|
|
|
|
Setting clk_adjust to 0x6(3/4 late cycle) for MPC8568MDS board is for
|
|
DDR2 on all current board versions especially ver 1.92 or later to bring
|
|
up.
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit 3db0bef59eab1155801618cef5c481e97553b597
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Tue Aug 7 18:07:27 2007 -0500
|
|
|
|
Use an absolute address when jumping out of 4k boot page
|
|
|
|
On e500 when we leave the 4k boot page we should use an absolute address since
|
|
we don't know where the board code may want us to be really running at.
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit 39980c610c9a4c381907c9e1d1b9c0e1c0dca57a
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Aug 13 14:49:59 2007 -0500
|
|
|
|
MPC85xx BA bits not set for 3-bit bank address DIMM
|
|
|
|
The current implementation does not set the number of bank address bits
|
|
(BA) in the processor. The default assumes 2 logical bank bits. This
|
|
works fine for a DIMM that uses devices with 4 internal banks (SPD
|
|
byte17 = 0x4) but needs to be set appropriately for a DIMM that uses
|
|
devices with 8 internal banks (SPD byte17 = 0x8).
|
|
|
|
Signed-off-by: Greg Davis <DavisG@embeddedplanet.com>
|
|
|
|
commit 6c543597bb4b1ecf5d8589f7abb0f39929fb7fd1
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Aug 13 14:38:06 2007 -0500
|
|
|
|
Fix minor 85xx warnings
|
|
|
|
Some patches had inserted warnings into the build:
|
|
* mpc8560ads declared data without using it
|
|
* cpu_init declared ecm and immap without using it in all CONFIGs
|
|
* MPC8548CDS.h had its default filenames changed so that they contained
|
|
"\m" in the paths. Made the defaults not Windows-specific (or
|
|
anything-specific)
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit f2cff6b104f82b993bef6086ce0c97159bbe1add
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:52 2007 -0500
|
|
|
|
8548cds PCIE support.
|
|
|
|
Make the early L1 cache stack region guarded to prevent speculative
|
|
fetches outside the locked range.
|
|
|
|
Use _PHYS defines, not _MEM for cpu-side PCI memory mapped regions.
|
|
init.S whitespace cleanup.
|
|
|
|
Allow TEXT_BASE value to be specified on command line. This allows it
|
|
to be set to 0xfffc0000 which cuts the uboot binary in half.
|
|
|
|
Clear and enable lbc and ecm errors.
|
|
|
|
Update last_busno in device-tree for pci and pcie.
|
|
|
|
Remove load of obsolete cpu/mpc85xx/pci.0
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 837f1ba05cfb248aba5ab8e1fb1bfeefa07d5962
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:51 2007 -0500
|
|
|
|
8544ds PCIE support
|
|
|
|
PCI1 LAW mapping should use CFG_PCI1_MEM_PHY and not _BASE address.
|
|
|
|
Enable LBC and ECM errors and clear error registers.
|
|
|
|
Add tftpflash env var to get uboot from tftp server and flash it.
|
|
|
|
Add pci/pcie convenience env vars to display register space:
|
|
"run pcie3regs" to see all pcie3 ccsr registers
|
|
"run pcie3cfg" to see all cfg registers
|
|
Whitespace cleanup and MPC8544DS.h
|
|
|
|
Enable CONFIG_INTERRUPTS.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 61a21e980a7b9188424d04f1c265fdc5c21c7e85
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue Aug 14 01:34:21 2007 -0500
|
|
|
|
85xx start.S cleanup and exception support
|
|
|
|
From: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
Support external interrupts from platform to eliminate system hangs.
|
|
Define CONFIG_INTERRUPTS board configure option to enable.
|
|
Enable ecm, ddr, lbc, and pci/pcie error interrupts in PIC.
|
|
|
|
Remove extra cpu initialization redundant with hardware initialization.
|
|
Whitespace cleanup.
|
|
|
|
Define and use _START_OFFSET consistent with other processors using
|
|
ppc_asm.tmpl
|
|
|
|
Move additional code from .text to boot page to make room for
|
|
exception vectors at start of image.
|
|
|
|
Handle Machine Check, External and Critical exceptions.
|
|
|
|
Fix e500 machine check error determination in traps.c
|
|
|
|
TEXT_BASE can now be 0xfffc_0000 - which cuts binary image in half.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 7bd30fc4a6475b41d6679ae3aafc9fa505260c47
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue Aug 14 01:33:18 2007 -0500
|
|
|
|
Add MPC8544DS README
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 40c7f9b0de4e300370adfc704128fa0f79a143b6
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:48 2007 -0500
|
|
|
|
85xx allow debugger to configure ddr.
|
|
|
|
Only check for mpc8548 rev 1 when compiled for 8548.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 29372ff38c5baab7d0e3a8c14fe11fa194a38704
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:47 2007 -0500
|
|
|
|
mpc85xx L2 cache reporting and SRAM relocation option.
|
|
|
|
Allow debugger to override flash cs0/cs1 settings to enable alternate
|
|
boot regions
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 41f0f8fb1ab92f0cba7d329de90070f822f8299f
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:46 2007 -0500
|
|
|
|
e500 needs ppc_asm.tmp MCK_EXCEPTION
|
|
|
|
Always define MCK_EXCEPTION macro - so e500 can use it too.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 53a5c424bf8655b7b4e2c305a441963259a26a81
|
|
Author: David Updegraff <dave@cray.com>
|
|
Date: Mon Jun 11 10:41:07 2007 -0500
|
|
|
|
multicast tftp: RFC2090
|
|
|
|
Implemented IETF RFC2090, Multicast TFTP. Initial implementation
|
|
on Realtek RTL8139 and Freescale TSEC.
|
|
|
|
Signed-off-by: David Updegraff <dave@cray.com>
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit 5d110f0aa69f065ee386ec1840dfee1e8cc46bc1
|
|
Author: Wilson Callan <wcallan@savantav.com>
|
|
Date: Sat Jul 28 10:56:13 2007 -0400
|
|
|
|
New CONFIG_BOOTP_SERVERIP option
|
|
|
|
Added CONFIG_BOOTP_SERVERIP to allow the tftp server to be different
|
|
from the bootp server
|
|
|
|
Signed-off-by: Wilson Callan <wcallan@savantav.com>
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit 50cca8b976ec74069860208c36e64ce8f4d5e4c1
|
|
Author: Mike Rapoport <mike@compulab.co.il>
|
|
Date: Sun Aug 12 08:48:27 2007 +0300
|
|
|
|
Add ability to take MAC address from the environment to DM9000 driver
|
|
|
|
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit be5d72d10d47609326226225181e301fb9a33b58
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon Aug 13 21:57:53 2007 +0200
|
|
|
|
Minor coding style cleanup. Update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit cca34967cbd13ff6bd352be29e3f1cc88ab24c05
|
|
Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Date: Sat Aug 11 06:54:58 2007 -0500
|
|
|
|
Modify SBC8641D to use new Freescale PCI routines
|
|
|
|
PCI-Express sockets 1 and 2 verified working with Intel Pro/1000 PT
|
|
adapter.
|
|
|
|
Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Signde-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a08458303e7f9db67f296980036d3292c35cb45c
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Fri Jun 29 18:38:51 2007 +0200
|
|
|
|
atmel_mci: Fix data timeout value
|
|
|
|
Calculate the data timeout based on values from the CSD instead of
|
|
just using a hardcoded DTOR value. This is a backport of a similar fix
|
|
in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
|
|
instead of down.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Mon Aug 13 17:22:31 2007 +0200
|
|
|
|
AVR32: Include <div64.h> instead of <asm/div64.h>
|
|
|
|
include/asm-avr32/div64.h was recently moved to include/div64.h, but
|
|
cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
|
|
the patch was merged perhaps?)
|
|
|
|
This patch updates cpu/at32ap/interrupts.c so that the avr32 port
|
|
compiles again.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed Jun 27 13:34:26 2007 +0200
|
|
|
|
atmel_mci: Use 512 byte blocksize if possible
|
|
|
|
Instead of always using the largest blocksize the card supports, check
|
|
if it can support smaller block sizes and use 512 bytes if possible.
|
|
Most cards do support this, and other parts of u-boot seem to have
|
|
trouble with block sizes different from 512 bytes.
|
|
|
|
Also enable underrun/overrun protection.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
|
|
|
|
commit 273db7e1bdd1937e32f1d4507321bb721ebd3118
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Aug 13 09:05:33 2007 +0200
|
|
|
|
ppc4xx: Fix problem in PLL clock calculation
|
|
|
|
This patch was originall provided by David Mitchell <dmitchell@amcc.com>
|
|
and fixes a bug in the PLL clock calculation.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 21:34:50 2007 +0200
|
|
|
|
Update CHANGELOG
|
|
|
|
commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 21:34:34 2007 +0200
|
|
|
|
Minor alignment of output, 2nd try.
|
|
Also update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 6b309f22a724fad8418e811751a0741b893419cf
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 20:35:49 2007 +0200
|
|
|
|
Minor alignment of output
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 6f6d7b9c8559e241e8d232621542b8b59699b07b
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 18:28:18 2007 +0200
|
|
|
|
Cleanup output on ADS5121 board
|
|
|
|
Signed-off-by: Wolfgang Denk
|
|
|
|
commit a4d2636f2a859245ed3a401f26189da2dfda4ceb
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 15:11:38 2007 +0200
|
|
|
|
Adapt board configuration and fix kernel crash on MCC200 board.
|
|
|
|
The update procedure was modified to turn off the USB subsystem
|
|
before exit for MCC200 and TRAB. This is necessary as otherwise the
|
|
USB controller continues to write periodically to system memory!
|
|
|
|
MCC200-specific notes:
|
|
- the patch disables the magic key check for MCC200
|
|
- the patch contains the configuration changes made
|
|
for the new revision of the board.
|
|
|
|
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit e27f3a6efb9db5a533223b05c629ff4ac8d921bf
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 14:47:54 2007 +0200
|
|
|
|
Adjust default configuration of ADS5121 board.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit afaac86fe2948ac84cd9a12bbed883b3c683e7d9
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sun Aug 12 14:27:39 2007 +0200
|
|
|
|
Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 5fe6be6208dda852c3564e384bd78d75784dea3e
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Tue Aug 7 21:14:22 2007 -0400
|
|
|
|
Improve error print messages.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 99dffca3b7590a16a00bc475c860b67b2a3f1462
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Jul 17 13:57:04 2007 -0500
|
|
|
|
fdt: allow for builds that don't want env and bd_t nodes
|
|
|
|
protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
|
|
area.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 91148bf7aeba142d6f348805db7625db7da64d6f
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Jul 17 13:56:53 2007 -0500
|
|
|
|
fdt: do board setup based on fdt address specified on bootm line
|
|
|
|
The last fdt patch to bootm did board setup based on the address
|
|
specified by a prior fdt address command invocation. The bootm
|
|
code, as its call to fdt_chosen does, should use the fdt specified
|
|
by the user on the bootm command. Note this restores full
|
|
functionality for the 8360's existing default boot environment
|
|
values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
|
|
before booting a kernel).
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit e125a2ffc209dd34794e326c7175658253beadf3
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Tue Jul 10 20:40:39 2007 -0400
|
|
|
|
Call ft_board_setup() from the bootm command.
|
|
|
|
In the patch titled "Create new fdt boardsetup command..." I removed the
|
|
call to ft_board_setup() from the routine fdt_chosen(), but I forgot
|
|
to add a direct call back into cmd_bootm.c
|
|
|
|
This fixes the oversight by adding the direct call to the bootm command.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit fd61e55dd8cb52ce3ff91b3917af26e24b6b0845
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Mon Jun 25 23:25:28 2007 -0400
|
|
|
|
Create new fdt boardsetup command, fix bug parsing [] form of set values.
|
|
|
|
Previously ft_board_setup() was called by fdt_chosen() which was not
|
|
really correctly structured. This splits ft_board_setup() out by creating
|
|
a new fdt boardsetup command.
|
|
|
|
Fix a bug when parsing fdt set command values which have the square
|
|
bracket form [00 11 22 33] - the length was updated incorrectly in when
|
|
parsing that form.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 6f35ded9e85493595e0eb66a82b502a95326d049
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Mon Jun 25 20:55:58 2007 -0400
|
|
|
|
Tighten up the error messages.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit c45874b05aae897a6c29d1a97d4bb708fca2756c
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Mon Jun 25 19:52:23 2007 -0400
|
|
|
|
Asthetic improvements: error messages and line lengths.
|
|
|
|
Tighten up the error messages, split overlength lines.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 35ec398f16e17df600edc1b38c1e9e62c15c9aa1
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Fri May 25 22:08:57 2007 -0400
|
|
|
|
Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
|
|
|
|
The fdt_chosen() function was adding/seting some properties ad-hoc
|
|
improperly and duplicated (poorly) what was done in ft_board_setup()
|
|
|
|
Clean up long lines (setting properties, printing errors).
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 06e19a07701c968f15d72c083b5872a1a11c7b01
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Mon May 21 23:27:16 2007 -0400
|
|
|
|
For fdt_find_node_by_path(), handle the root path properly.
|
|
|
|
Also removes the special case root path detection in cmd_fdt.c since it
|
|
is no longer necessary.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 9675ee7208ab965d13ea8d8262d77ac4160ef549
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Thu May 17 23:54:36 2007 -0400
|
|
|
|
Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
|
|
|
|
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
|
|
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 1a861169bc3758f9de3aead62b058736c6891246
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Wed Jun 6 22:47:58 2007 -0400
|
|
|
|
Replace fdt_node_offset() with fdt_find_node_by_path().
|
|
|
|
The new name matches more closely the kernel's name, which is also
|
|
a much better description.
|
|
|
|
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
|
|
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit addd8ce83078c25f0eca5f23adbdfc64ca50a243
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Wed May 16 22:39:59 2007 -0400
|
|
|
|
Fix cmd_fdt line lengths, refactor code.
|
|
|
|
Break lines that were greater than 80 characters in length.
|
|
Move the fdt print and property parsing code to separate static functions
|
|
to reduce coding clutter in the fdt_cmd handling body.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 25114033ab21788810c48ba4df103b649da1223b
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat May 12 09:47:25 2007 -0400
|
|
|
|
FDT command improvements.
|
|
|
|
Fix "fdt set" so that it will create a non-existing property.
|
|
Add "fdt mknode" to create nodes.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 38eb508e8e811e2e57628f445de3a24a23c7d804
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat May 12 09:45:46 2007 -0400
|
|
|
|
Reorganize and fix problems (returns) in the bootm command.
|
|
|
|
Do *NOT* return after the "point of no return" has been passed.
|
|
If something goes wrong, the board must be reset after that point.
|
|
Move the "Transferring control to Linux" debug message back to where it
|
|
belongs: just before transferring control to linux.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 89c8757d8f213c47709bdc4efe0695263a6080a6
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Tue May 8 21:27:35 2007 -0400
|
|
|
|
Fix bugs in the CONFIG_OF_LIBFDT
|
|
|
|
Stupid coding mistakes (identified by Timur Tabi, thanks).
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 6be07cc1ca458278c85ecdbf1a0536cff4c701ec
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Wed Apr 25 22:47:15 2007 -0400
|
|
|
|
Improve fdt move length handling.
|
|
|
|
Make the length parameter optional: if not specified, do the move using
|
|
the current size unchanged.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit bb930e76fea6cf89ca2d98e2f7c7a6043d79327d
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Wed Apr 25 22:23:36 2007 -0400
|
|
|
|
Minor code clean up.
|
|
|
|
Declare the variable fdt properly as extern.
|
|
Call the "set_fn" function pointer the "short way" without the full
|
|
dereferencing syntax.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit ba24e2ac3bdb5c489f3c787e7542b6474c4d65c6
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Wed Apr 25 21:24:27 2007 -0400
|
|
|
|
Improve error messages, more informative.
|
|
|
|
Print more than the raw libfdt error message strings. This is especially
|
|
useful for cluing in the user when the bootm command aborts due to
|
|
blob problems.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 8096b3b8f772c1894ddeda9dbceff6a8826473a4
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Fri Apr 20 22:46:53 2007 -0400
|
|
|
|
libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
|
|
|
|
This is the way u-boot reduces configured-out code. At Wolfgang
|
|
Grandegger and Wolfgang Denk's request, make libfdt conform.
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 923efd286411ed052d9e074f59f8986d6081061c
|
|
Author: Bruce Adler <bruce.adler@ccpu.com>
|
|
Date: Fri Aug 10 14:54:47 2007 -0700
|
|
|
|
add image size and descriptors for Spartan 3E FPGA chips
|
|
|
|
Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
|
|
|
|
Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
|
|
|
|
commit fb56579ffe7ef3275b7036bb7b924e5a0d32bd70
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Fri Aug 10 15:34:48 2007 -0500
|
|
|
|
make MAKEALL more immune to merge conflicts
|
|
|
|
..by placing board entries one per line, as suggested by jdl.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 2628114ec564f969f34b5f7105fbd168cb8c9c3f
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Fri Aug 10 13:28:25 2007 -0500
|
|
|
|
README: Remove outdated cpu type, board type, and NAME_config lists
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 49bb59912d21aacb507eb81fd21fb7af650c706c
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Fri Aug 10 15:48:59 2007 +0800
|
|
|
|
mpc83xx: Suppress the warning 'burstlen'
|
|
|
|
suppress the warning 'burstlen' of spd_sdram.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit c646bba6465a45c60746d4cc1602cd06c1960f2d
|
|
Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Date: Thu Aug 9 15:11:03 2007 -0500
|
|
|
|
Add support for SBC8641D. Config files.
|
|
|
|
Add support for Wind River's SBC8641D reference board.
|
|
|
|
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Acked-by: Wolfgang Denk <wd@denx.de>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8ac273271d57321f90505c7a51cdb1ef2113b628
|
|
Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Date: Thu Aug 9 15:10:53 2007 -0500
|
|
|
|
Add support for SBC8641D. Board files.
|
|
|
|
Add support for Wind River's SBC8641D reference board.
|
|
|
|
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Acked-by: Wolfgang Denk <wd@denx.de>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit c2c0ab4aff86622b837a48a0e560351f9afafb95
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Aug 10 20:34:58 2007 +0200
|
|
|
|
Conding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit c74b2108e31fe09bd1c5d291c3cf360510d4f13e
|
|
Author: Sergey Kubushyn <ksi@koi8.net>
|
|
Date: Fri Aug 10 20:26:18 2007 +0200
|
|
|
|
[ARM] TI DaVinci support, hopefully final
|
|
|
|
Add support for the following DaVinci boards:
|
|
- DV_EVM
|
|
- SCHMOOGIE
|
|
- SONATA
|
|
|
|
Changes:
|
|
|
|
- Split into separate board directories
|
|
- Removed changes to MTD_DEBUG (or whatever it's called)
|
|
- New CONFIG_CMD party line followed
|
|
- Some cosmetic fixes, cleanup etc.
|
|
- Patches against the latest U-Boot tree as of now.
|
|
- Fixed CONFIG_CMD_NET in net files.
|
|
- Fixed CONFIG_CMD_EEPROM for schmoogie.
|
|
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
|
|
DV_EVM. Can't check if it works on SONATA, don't have a board any more,
|
|
but it at least compiles.
|
|
|
|
Here is an excerpt from session log on SCHMOOGIE...
|
|
|
|
U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
|
|
|
|
DRAM: 128 MB
|
|
NAND: 128 MiB
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
ARM Clock : 297MHz
|
|
DDR Clock : 162MHz
|
|
ETH PHY : DP83848 @ 0x01
|
|
U-Boot > iprobe
|
|
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
|
|
U-Boot > ping 192.168.253.10
|
|
host 192.168.253.10 is alive
|
|
U-Boot >
|
|
|
|
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
|
|
Acked-by: Dirk Behme <dirk.behme@gmail.com>
|
|
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2e4d94f1e3c2961428967a33b6ff2520568391b3
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:45 2007 -0500
|
|
|
|
fsl_pci_init cleanup.
|
|
|
|
Do not enable normal errors created during probe (master abort, perr,
|
|
and pcie Invalid Configuration access).
|
|
|
|
Add CONFIG_PCI_NOSCAN board option to prevent bus scan.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 936b3e69b667c3eb9a61ece4e78647d3fce9fc2a
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Fri Jul 27 01:50:44 2007 -0500
|
|
|
|
pciauto_setup_device bars_num fix
|
|
|
|
Passing bars_num=0 to pciauto_setup_device should assign no bars.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit cf0b185e58ca0aec8ae2b2a8804ec0ef58ee21d4
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Aug 6 17:39:44 2007 -0500
|
|
|
|
8641hpcn: Do correct sized pointer math.
|
|
|
|
When I rebased Ed's patch and cleaned up a few compilation
|
|
problems, I apparently rebased my brain on crack first.
|
|
Fix that by doing (char *) sized pointer math as needed.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit cfc7a7f5bb3273c9951173c788001d45118f141f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Aug 2 14:42:20 2007 -0500
|
|
|
|
cpu/86xx fixes.
|
|
|
|
Remove rev 1 fixes.
|
|
Always set PICGCR_MODE.
|
|
Enable machine check and provide board config option
|
|
to set and handle SoC error interrupts.
|
|
|
|
Include MSSSR0 in error message.
|
|
|
|
Isolate a RAMBOOT bit of code with #ifdef CFG_RAMBOOT.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 35d22f957a85a22bb3cd1ad084fa5404620d1c42
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Aug 10 10:42:25 2007 +0200
|
|
|
|
Coding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 3a6d56c20989fe27360afe743bd2a7ad4d76e48f
|
|
Author: Dirk Behme <dirk.behme@googlemail.com>
|
|
Date: Thu Aug 2 17:42:08 2007 +0200
|
|
|
|
Make use of generic 64bit division in nand_util.c
|
|
|
|
Use generic 64bit division in nand_util.c. This makes nand_util.c
|
|
independent of any toolchain 64bit division.
|
|
|
|
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
|
|
|
|
commit f7c086e94e8ce9aad7268af97f73aa6884686f27
|
|
Author: Dirk Behme <dirk.behme@googlemail.com>
|
|
Date: Thu Aug 2 17:41:14 2007 +0200
|
|
|
|
Move 64bit division from avr32 to generic lib
|
|
|
|
Move the 64bit division from lib_avr32 to lib_generic. With this, all
|
|
boards can do_div/__div64_32 if needed, not only avr one. Code is put
|
|
to lib_generic, so no larger memory footprint if not used. No code
|
|
modifications. Thanks for proposal by Håvard Skinnemoen.
|
|
|
|
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
|
|
|
|
commit 157cda4d0c3d592ccbb19bbfc07d9251894f0894
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:31:22 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: HCU5 files
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 6e5de26c6e7580faf16e87745cd488b92b492d0c
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:30:33 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: HCU4 files
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit e8397fc78c9394d71de233a4d810fbc9047e4c76
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:38:26 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: common files
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit ac982ea5a4f2f993efcf52dca122f5a59df047d8
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:28:44 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: make related
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 137fdd9f474ecb853efdace5200576308c67f18d
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:28:03 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: HCU5 config
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 714bc55b35b6f6a65cc8740a3842a543e88cdef2
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:27:15 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: HCU4 config
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 1894dd381124bdbfbdae7cf3a6ca52a8eb1f4421
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:25:31 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: READMEs
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 641cca9569ce351ddb287fd3343d8b1dcb591db4
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Fri Jul 27 11:37:40 2007 +0200
|
|
|
|
Add PPC4xx-HCU4 and HCU5 boards: Infrastructure
|
|
|
|
This series of patches adds support for 2 boards from Netstal Maschinen.
|
|
|
|
The HCU4 has a PPC405Gpr and
|
|
the HCU5 has a PPC440EPX.
|
|
|
|
The HCU4 has a somehow complicated flash setup, as the booteprom is
|
|
only 8 bits and the CFI 16 bits wide, which makes it impossible to use a more
|
|
elegant solution.
|
|
|
|
The HCU5 has only a booteprom as the whole code will be downloaded from a
|
|
different board which has HD, CD-ROM, etc and where all code is stored.
|
|
|
|
This is my third try. I incorporated all suggestions made by Wolfgang and Stefan.
|
|
Thanks them a lot.
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
|
|
|
|
commit 3e4c90c6233618fc1806e63fde68df5f3d6a0171
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Aug 10 08:42:55 2007 +0200
|
|
|
|
ppc4xx: Update lwmon5 POST configuration
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 29cb25da56afe18cf5e7072a92a9d98ea8af1fd4
|
|
Author: Yuri Tikhonov <yur@emcraft.com>
|
|
Date: Fri Aug 10 08:25:22 2007 +0200
|
|
|
|
POST: Add ppc4xx UART POST support without external uart clock (lwmon5)
|
|
|
|
The patch adds support for UART POST on ppc44x-based boards with no
|
|
external serial clocks installed.
|
|
|
|
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 99c2fdab91bc633e46fb41dbaa629f87ccf6e00f
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Mon Aug 6 18:18:34 2007 -0500
|
|
|
|
mpc83xx: fix ITX[GP] O=builddir builds
|
|
|
|
make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
|
|
|
|
Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
|
|
"BUILD_DIR=<some dir> ./MAKEALL ..."
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 47e8bc846759e037b8af0e5f9c9f9cfa7a1050c3
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Wed Aug 1 15:00:59 2007 +0800
|
|
|
|
mpc83xx: Correct the README for DDR ECC
|
|
|
|
Update the README for DDR ECC, change the name
|
|
to README.mpc83xx.ddrecc.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit daab8c67d2defef73dc26ab07f0c3afd1b05d019
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Wed Aug 1 15:00:15 2007 +0800
|
|
|
|
mpc83xx: Consolidate the ECC support of 83xx
|
|
|
|
Remove the duplicated source code of ecc command on the <board>.c,
|
|
for reused, move these code to cpu/mpc83xx directory.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 036575c544cf1b69654d8fb334bda69c6ff3da36
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Sat Aug 4 13:37:39 2007 +0800
|
|
|
|
mpc83xx: Correct the burst length for DDR2 with 32 bits
|
|
|
|
The burst length should be 4 for DDR2 with 32 bits bus
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit 1c274c4e05b6dc9b24edc8aa618b02f607ee6eed
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Jul 25 19:25:33 2007 -0500
|
|
|
|
mpc83xx: add support for the MPC8323E RDB
|
|
|
|
MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
|
|
five 10/100 ethernet ports connected via an ICPlus IP175C
|
|
switch, one PCI slot, and serial. Features not supported
|
|
in this patch are SD card interface, 2 USB ports, and the
|
|
two phone ports.
|
|
|
|
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 343d91009d55fc5b3ff8cc940597af6c6aa1d359
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Jul 25 19:25:28 2007 -0500
|
|
|
|
mpc83xx: fixup generic pci for libfdt
|
|
|
|
add libfdt support to the generic 83xx pci code
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit f57ac7a7b37109245b69db80839ebee26179966a
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Jul 25 19:25:22 2007 -0500
|
|
|
|
mpc83xx: fix 8360 and cpu functions to update fdt being passed
|
|
|
|
..and not the global fdt. Rename local fdt vars to blob so as not to
|
|
be confused with the global var with the same three-letter name.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 8be404459a6b7395415a57bb35e8377e3b2b5acb
|
|
Author: Jerry Van Baren <gvb.uboot@gmail.com>
|
|
Date: Wed Jul 4 21:34:24 2007 -0400
|
|
|
|
mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
|
|
|
|
Several node strings were not correct (trailing slashes and properties
|
|
in the strings)
|
|
Added setting of the timebase-frequency.
|
|
Improved error messages and use debug() instead of printf().
|
|
|
|
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 26d02c9bbac1751c5e19294f000100b48d43a920
|
|
Author: Jerry Van Baren <gvb.uboot@gmail.com>
|
|
Date: Wed Jul 4 21:27:30 2007 -0400
|
|
|
|
mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
|
|
|
|
The new name matches more closely the kernel's name, which is also
|
|
a much better description.
|
|
|
|
These are the mpc83xx changes made necessary by the function name change.
|
|
|
|
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
|
|
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 9be39a67c9f8fef7107f5df09d673005f04d0963
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Mon Jun 25 10:41:56 2007 +0800
|
|
|
|
mpc83xx: Add support for the display of reset status
|
|
|
|
83xx processor family has many reset sources, such as
|
|
power on reset, software hard reset, software soft reset,
|
|
JTAG, bus monitor, software watchdog, check stop reset,
|
|
external hard reset, external software reset.
|
|
sometimes, to figure out the fault of system, we need to
|
|
know the cause of reset early before the prompt of
|
|
u-boot present.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit ff9658d7049bf8c8e8e0a05dbe5e9f7e91aa5a5d
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Mon Jun 25 10:41:04 2007 +0800
|
|
|
|
mpc83xx: Fix the align bug of SDMA buffer
|
|
|
|
According to the latest user manual, the SDMA temporary
|
|
buffer base address must be 4KB aligned.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 66dc2c2dc51f8b88bb8e231bc80cd92eae1d6476
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Mon Jun 25 13:21:12 2007 +0800
|
|
|
|
mpc83xx: Revise the MPC8360EMDS readme doc
|
|
|
|
When the rev2.x silicon mount on the MPC8360EMDS baord,
|
|
and if you are using the u-boot version after the commit
|
|
3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
|
|
to make the ethernet interface usable, we have to setup
|
|
the jumpers correctly.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit e739bc95797aac4fefc4c75b55c7c78e59d3ea9c
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Jul 3 13:46:32 2007 -0500
|
|
|
|
FSL I2C driver programs the two I2C busses differently
|
|
|
|
The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
|
|
The second I2C bus has its slave address programmed incorrectly and is
|
|
missing a 5-us delay.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit df33f6b4d6d63693dd9200808b242de1b86cb8e8
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Jul 3 13:04:34 2007 -0500
|
|
|
|
Update SCCR programming in cpu_init_f() to support all 83xx processors
|
|
|
|
Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
|
|
bitfields for all 83xx processors. The code to update some bitfields was
|
|
compiled only on some processors. Now, the bitfields are programmed as long
|
|
as the corresponding CFG_SCCR option is defined in the board header file.
|
|
This means that the board header file should not define any CFG_SCCR macros
|
|
for bitfields that don't exist on that processor, otherwise the SCCR will be
|
|
programmed incorrectly.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 9546266999f0b9b51372636614211b88d90f0f25
|
|
Author: Martin Krause <martin.krause@tqs.de>
|
|
Date: Fri Jun 22 13:04:22 2007 +0200
|
|
|
|
TQM834x: cleanup configuraton
|
|
|
|
Remove irritating #undef DEBUG
|
|
|
|
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 5d497e6bf0f5bf63729b4a47b3fd786d3c77a1bc
|
|
Author: david.saada <David.Saada@ecitele.com>
|
|
Date: Mon Jun 18 09:09:53 2007 -0700
|
|
|
|
MPC83xx: Fix makefile to generate config.h file in the build directory
|
|
|
|
MPC83xx: Fix the Makefile config sections to generate the include/config.h
|
|
file in the build directory instead of the source directory.
|
|
|
|
Signed-off-by: David Saada <david.saada@ecitele.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 1ded0242e437259366792d52b7e9d1e1931d8fa5
|
|
Author: Lee Nipper <Lee.Nipper@freescale.com>
|
|
Date: Thu Jun 14 20:07:33 2007 -0500
|
|
|
|
mpc83xx: Add support for 8360 silicon revision 2.1
|
|
|
|
This change adds 8360 silicon revision 2.1 support to u-boot.
|
|
|
|
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit a22806469a8f2b69c829f4fd5361fdebd0cb01b4
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Wed Aug 8 04:14:28 2007 -0500
|
|
|
|
Treat ppc64 host as ppc
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit 0dc4279b08ff82472bec2e2c90858602459febe8
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Wed Aug 8 09:01:46 2007 +0800
|
|
|
|
Minor fix for bios emulator makefile
|
|
|
|
Add $(obj) to LIB avoiding objects be built in the source dir
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit ce981dc857adfc8036ca2f6d5d5a06c2a8aa77d6
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Wed Aug 8 08:33:11 2007 +0800
|
|
|
|
Add CONFIG_BIOSEMU define to guard all the bios emulator code
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
This patch fix the compile issue on the board that did not enable the bios emulator
|
|
|
|
commit ed8106433522f2ea8933e9808346860d061d7731
|
|
Author: Zach Sadecki <Zach.Sadecki@ripcode.com>
|
|
Date: Tue Jul 31 12:27:25 2007 -0500
|
|
|
|
tsec: fix multiple PHY support
|
|
|
|
The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
|
|
broke multiple PHY support in tsec.c. This fixes it.
|
|
|
|
Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit dcb84b7208ade0bbebbeb56bec9c2c64f8b2eede
|
|
Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Date: Thu Aug 9 09:08:18 2007 -0500
|
|
|
|
tsec: Allow Ten Bit Interface address to be configurable
|
|
|
|
Allow the address of the Ten Bit Interface (TBI) to be changed in the
|
|
event of a conflict with another device.
|
|
|
|
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
|
|
commit 3ba4c2d68f6541db4677b4aea12071f56e6ff6e6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Aug 8 09:54:26 2007 +0200
|
|
|
|
Coding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a41de1f0d373e09c782dea558385a06247111ba5
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 05:15:18 2007 -0500
|
|
|
|
Port enabled for I2C signals and chipselects port configuration.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 1a33ce65a4c51a69190dd8c408f9e1c62a66e94f
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 04:31:18 2007 -0500
|
|
|
|
Added NAND support
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit eaf9e447beb3e498818ef8ad0b8c1597cd506149
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 04:11:20 2007 -0500
|
|
|
|
Added I2C support
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 99c03c175d2689093176facf17c58ce2cb320001
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 03:58:52 2007 -0500
|
|
|
|
Changed CFG_CLK to gd->bus_clk for CFG_TIMER_PRESCALER. Added DECLARE_GLOBAL_DATA_PTR for time.c
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 8d1d66af54d305de29d0bbf4aa8c9e6375f7f731
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 03:55:21 2007 -0500
|
|
|
|
Added uart_gpio_conf() in serial_init(), seperated uart port configuration from cpu_init() to uart_gpio_conf()
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 6fde84a44b7e575ea80fe0e2d5be3b6f73d1e630
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 03:43:30 2007 -0500
|
|
|
|
Moved sync() from board file to include/asm-m68k/io.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 9e737d8476e7d6a596d16caaf6a3853a9a1190a2
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 03:30:44 2007 -0500
|
|
|
|
Declared attributes of void __mii_init(void) as an alias for int mii_init(void)
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 9998bd37ead85e93953559720710d3b0685c81e6
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Sun Aug 5 03:19:10 2007 -0500
|
|
|
|
Renamed CONFIG_MCFSERIAL to CONFIG_MCFUART
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 7c4c3722a38d40b0cf537ddae72b04f4088b190c
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Tue Aug 7 16:17:06 2007 +0800
|
|
|
|
Add CONFIG_BIOSEMU define to guard all the bios emulator code
|
|
|
|
This patch fix the compile issue on the board that did not enable the bios emulator
|
|
|
|
commit bf1060ea4f9eaa7e7d164a70a7d6f28939882053
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Aug 7 16:02:13 2007 +0200
|
|
|
|
Fix missing brace error in fs/fat/fat.c
|
|
[pointed out by Roderik Wildenburg]
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 6c33c78557ca6f8da68c01ce33e278695197d3f4
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon Aug 6 23:21:05 2007 +0200
|
|
|
|
Fixed typo in README (pointed out by Martin Jost).
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 537223afa61f64480df31ce440a9cb386df4a814
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Aug 6 21:10:17 2007 +0200
|
|
|
|
ppc4xx: Update AMCC Bamboo README doc/README.bamboo
|
|
|
|
As suggested by Eugene O'Brien <Eugene.O'Brien@advantechamt.com>,
|
|
here an updated Bamboo README.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9c7e4b06214db61bb21f1bcbe57c97519669baae
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon Aug 6 02:17:36 2007 +0200
|
|
|
|
Coding style cleanup. Update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 221838cc7eb178370ff62aa05920a582e12ac322
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Tue Jul 10 09:03:22 2007 +0800
|
|
|
|
Remove the bios emulator from MAI board.
|
|
|
|
The bios emulator in the MAI board can not pass compile
|
|
and have a lot of crap in it. remove it and will have a
|
|
clean and small bios emulator in the drivers directory
|
|
which can be uesed for every board.
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 5618332409bb96f4448d1712899369fc80c0b489
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Fri Jul 13 12:14:59 2007 +0800
|
|
|
|
Fix some compile issues for MAI board.
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 0f460a1ee148b648ee242c3157650287d4296260
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Fri Jul 13 12:14:58 2007 +0800
|
|
|
|
Configurations for ATI video card BIOS emulator
|
|
|
|
This patch add definition of the BIOS emulator and the ATI framebuffer
|
|
driver for MPC8641HPCN board.
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit ece92f85053b8df613edcf05b26a416cbc3d629c
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Fri Jul 6 08:34:56 2007 +0800
|
|
|
|
This is a BIOS emulator, porting from SciTech for u-boot, mainly for
|
|
ATI video card BIOS. and can be used for x86 code emulation by some
|
|
modifications.
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 5072188acabde3178fac7f5a597150e6e74fd40c
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Fri Jul 6 08:33:33 2007 +0800
|
|
|
|
This is a framebuffer driver for ATI video card, can work for PCI9200,
|
|
X300, X700, X800 ATI video cards.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 5728be389e65fd47f34b33c2596271eb4db751ae
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon Aug 6 01:01:49 2007 +0200
|
|
|
|
Coding style cleanup. Update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 8092fef4c29b395958bb649647da7e3775731517
|
|
Author: Martin Krause <Martin.Krause@tqs.de>
|
|
Date: Tue Dec 12 14:26:01 2006 +0100
|
|
|
|
Add functions to list of exported functions
|
|
|
|
Additionally export the following fuctions (to make trab_config build again):
|
|
- simple_strtol()
|
|
- strcmp()
|
|
|
|
Also bump the ABI version to reflect this change
|
|
|
|
Signed-off-by: Martin Krause <martin.krause@tqs.de>
|
|
|
|
commit 63cec5814fab5d2b1c86982327433807a5ac0249
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Thu Aug 2 14:09:49 2007 -0500
|
|
|
|
Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
|
|
|
|
All of the PCI/PCI-Express driver and initialization code that
|
|
was in the MPC8641HPCN port has now been moved into the common
|
|
drivers/fsl_pci_init.c. In a subsequent patch, this will be
|
|
utilized by the 85xx ports as well.
|
|
|
|
Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
|
|
|
|
Also enable the second PCI-Express controller on 8641
|
|
by getting its BATS and CFG_ setup right.
|
|
|
|
Fixed a u16 vendor compiler warning in AHCI driver too.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 86b116b1b1e165ca4840daefed36d2e3b8460173
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Fri Aug 3 12:08:16 2007 +0200
|
|
|
|
cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
|
|
|
|
Add the ability for modules from the Schindler cm5200 family to use a
|
|
single U-Boot image:
|
|
- rename cm1_qp1 to cm5200
|
|
- add run-time module detection
|
|
- parametrize SDRAM configuration according to the module we are running on
|
|
|
|
Few minor, board-specific fixes included in this patch:
|
|
- better MAC address handling
|
|
- updated default environment ('update' command uses +{filesize} now)
|
|
- improved error messages in the auto-update code
|
|
- allow booting U-Boot from RAM (CFG_RAMBOOT)
|
|
|
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit c7e717ebc2b044d7a71062552c9dc0f54ea9b779
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Fri Aug 3 04:05:25 2007 -0500
|
|
|
|
Add Marvell 1149 PHY support to the TSEC
|
|
|
|
commit b1b54e352028ed370c3aa95d6fdeb9d64c5d2f86
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Aug 2 21:27:46 2007 +0200
|
|
|
|
Coding style cleanup, update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 63e22764d2f8653f68888c667eb65b3996b52680
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Aug 2 10:11:18 2007 +0200
|
|
|
|
Minor cleanup of <board>_nand build rules.
|
|
|
|
commit 9ca8d79de096c65b9b9c867259b3ff4685f775ef
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Aug 2 08:33:56 2007 +0200
|
|
|
|
ppc4xx: Code cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit c92409812206ac67a7fa7aae298539a9c3804a46
|
|
Author: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Date: Tue Jul 31 18:51:48 2007 +0200
|
|
|
|
[ppc440SPe] Graceful recovery from machine check during PCIe configuration
|
|
|
|
During config transactions on the PCIe bus an attempt to scan for a
|
|
non-existent device can lead to a machine check exception with certain
|
|
peripheral devices. In order to avoid crashing in such scenarios the
|
|
instrumented versions of the config cycle read routines are introduced, so
|
|
the exceptions fixups framework can gracefully recover.
|
|
|
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Acked-by: Rafal Jaworowski <raj@semihalf.com>
|
|
|
|
commit dec99558b9ea75a37940d07f41a3565a50b54ad1
|
|
Author: Rafal Jaworowski <raj@semihalf.com>
|
|
Date: Tue Jul 31 18:19:54 2007 +0200
|
|
|
|
[ppc4xx] Separate settings for PCIe bus numbering on 440SPe rev.A
|
|
|
|
This brings back separate settings for PCIe bus numbers depending on chip
|
|
revision, which got eliminated in 2b393b0f0af8402ef43b25c1968bfd29714ddffa
|
|
commit. 440SPe rev. A does NOT work properly with the same settings as for
|
|
the rev. B (no devices are seen on the bus during enumeration).
|
|
|
|
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
|
|
|
commit cdd917a43da6fa7fc8f54a3cc9f420ce5ecf3197
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Aug 2 00:48:45 2007 +0200
|
|
|
|
Fix build errors and warnings / code cleanup.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit d2f68006627eda6cb6c7f364bddf621dbfd2fc68
|
|
Author: Eugene OBrien <eugene.obrien@advantechamt.com>
|
|
Date: Tue Jul 31 10:24:56 2007 +0200
|
|
|
|
ppc4xx: Update AMCC Bamboo 440EP support
|
|
|
|
Changed storage type of cfg_simulate_spd_eeprom to const
|
|
Changed storage type of gpio_tab to stack storage
|
|
(Cannot access global data declarations in .bss until afer code relocation)
|
|
|
|
Improved SDRAM tests to catch problems where data is not uniquely addressable
|
|
(e.g. incorrectly programmed SDRAM row or columns)
|
|
|
|
Added CONFIG_PROG_SDRAM_TLB to support Bamboo SIMM/DIMM modules
|
|
Fixed AM29LV320DT (OpCode Flash) sector map
|
|
|
|
Signed-off-by: Eugene OBrien <eugene.obrien@advantechamt.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ea9f6bce383cc9fbcdee28b5836109b1a6dba574
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jul 31 08:37:01 2007 +0200
|
|
|
|
ppc4xx: Update 440EPx lwmon5 board support
|
|
|
|
- Clear ECC status regs after ECC POST test
|
|
- Set dcbz for ECC generation with caches enabled as default
|
|
- Code cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 27a528fb41433c4c1e2b5d6bd3fd8d78606fc724
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 30 11:04:57 2007 +0200
|
|
|
|
ppc4xx: Only print ECC related info when the error bis are set
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e36220a4baf1f188ba60f17e9d0f043069b1362a
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Fri Jul 27 16:44:31 2007 +0200
|
|
|
|
new FPGA image for PLU405 board
|
|
|
|
new FPGA image for PLU405 board with improved CompactFlash timing
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit 8993e54b6f397973794f3d6f47d3b3c0c98dd4f6
|
|
Author: Rafal Jaworowski <raj@semihalf.com>
|
|
Date: Fri Jul 27 14:43:59 2007 +0200
|
|
|
|
[ADS5121] Support for the ADS5121 board
|
|
|
|
The following MPC5121e subsystems are supported:
|
|
|
|
- low-level CPU init
|
|
- NOR Boot Flash (common CFI driver)
|
|
- DDR SDRAM
|
|
- FEC
|
|
- I2C
|
|
- Watchdog
|
|
|
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
|
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
|
|
|
|
commit 1863cfb7b100ba0ee3401799457a01dc058745f8
|
|
Author: Rafal Jaworowski <raj@semihalf.com>
|
|
Date: Fri Jul 27 14:22:04 2007 +0200
|
|
|
|
[PPC] Remove unused MSR_USER definition
|
|
|
|
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
|
|
|
commit d4024bb72dd81695ec099b2199eda0d27c623e62
|
|
Author: John Otken <john@softadvances.com>
|
|
Date: Thu Jul 26 17:49:11 2007 +0200
|
|
|
|
ppc4xx: Add support for AMCC 405EP Taihu board
|
|
|
|
Signed-off-by: John Otken <john@softadvances.com>
|
|
|
|
commit b66091de6c7390620312c2501db23d8391e7cabb
|
|
Author: Anatolij Gustschin <agust@denx.de>
|
|
Date: Thu Jul 26 15:08:01 2007 +0200
|
|
|
|
ppc4xx: lwmon5: Update Lime initialization
|
|
|
|
Change Lime SDRAM initialization to now support 100MHz and
|
|
133MHz (if enabled). Also the framebuffer is initialized to
|
|
display a blue rectangle with a white border.
|
|
|
|
Signed-off-by: Anatolij Gustschin <agust@denx.de>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9f24a808f17fc0f37b7fb4805f734741335caecc
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jul 24 09:52:52 2007 +0200
|
|
|
|
ppc4xx: lwmon5: Support for 128 MByte NOR FLASH added
|
|
|
|
The used Intel NOR FLASH chips have internally two dies, and are now
|
|
treated as two seperate chips.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit aedf5bde179ecfbd0a96130d18996a96518b785f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jul 24 07:20:09 2007 +0200
|
|
|
|
ppc4xx: Fix lwmon5 interrupt controller setup (polarity, trigger...)
|
|
|
|
As suggested by Hakan Eryigit, here an updated setup for the lwmon5
|
|
interrupt controller.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a71d96eac8130b53a91f93cd10c70fca0db18d52
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jul 20 15:03:44 2007 +0200
|
|
|
|
ppc4xx: Fix bug with default GPIO output value
|
|
|
|
As spotted by Matthias Fuchs, the default output values for all GPIO1
|
|
outputs were not setup correctly. This patch fixes this issue.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 531e3e8b831f357056448fa573137d5fb37000fd
|
|
Author: Pavel Kolesnikov <concord@emcraft.com>
|
|
Date: Fri Jul 20 15:03:03 2007 +0200
|
|
|
|
POST: Add ECC POST for the lwmon5 board
|
|
|
|
This patch adds ECC Post test for the Lwmon5 board based
|
|
on PPC440EPx to U-Boot.
|
|
|
|
Signed-off-by: Pavel Kolesnikov <concord@emcraft.com>
|
|
Acked-by: Yuri Tikhonov <yur@emcraft.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cc3023b9f95d7ac959a764471a65001062aecf41
|
|
Author: Rafal Jaworowski <raj@semihalf.com>
|
|
Date: Thu Jul 19 17:12:28 2007 +0200
|
|
|
|
Fix breakage of 8xx boards from recent commit.
|
|
|
|
This patch fixes the negative consequences for 8xx of the recent
|
|
"ppc4xx: Clean up 440 exceptions handling" commit.
|
|
|
|
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
|
|
|
commit c883f6ea32dce91f07670b3aafecf6c99b1e5341
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 16 13:11:12 2007 +0200
|
|
|
|
Coding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 8848ec858f74ed6dab06fb6d5ddc933e0a1328bf
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 16 10:02:12 2007 +0200
|
|
|
|
ppc4xx: Code cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2a49fc17d09020e7ebd9536694d99d20e419fcb8
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 16 10:01:38 2007 +0200
|
|
|
|
ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit df3f17422aeb03fb81a7ac8c78d2b05d05aa4cf9
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 16 10:00:43 2007 +0200
|
|
|
|
ppc4xx: Support for Yucca board with 440SPe Rev A added to 44x_spd_ddr2.c
|
|
|
|
The new boardspecific DDR2 controller configuration is used for the Yucca
|
|
board. Now the Yucca board with 440SPe Rev. A chips is also supported.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6ed14addf97c8cd8f531e9ae7b2d3e222fffd53e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 16 09:57:00 2007 +0200
|
|
|
|
ppc4xx: Add new weak functions to support boardspecific DDR2 configuration
|
|
|
|
The new "weak" functions ddr_wrdtr() and ddr_clktr() are added to better
|
|
support non default, boardspecific DDR(2) controller configuration.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 5743a9207a370b90f09b20ebd61167c806b937f3
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 16 08:53:51 2007 +0200
|
|
|
|
ppc4xx: Add remove_tlb() function to remove a mem area from TLB setup
|
|
|
|
The new function remove_tlb() can be used to remove the TLB's used to
|
|
map a specific memory region. This is especially useful for the DDR(2)
|
|
setup routines which configure the SDRAM area temporarily as a cached
|
|
area (for speedup on auto-calibration and ECC generation) and later
|
|
need this area uncached for normal usage.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 3a6cab844cf74f76639d795e0be8717e02c86af7
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat Jul 14 22:51:02 2007 +0200
|
|
|
|
Update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 011595307731a7a67a7445d107c279d031e8ab97
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Sat Jul 14 01:06:58 2007 +0200
|
|
|
|
[PCS440EP] - fix compile error, if BUILD_DIR is used
|
|
|
|
commit fad63407154f46246ce80d53a9c669a44362ac67
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Fri Jul 13 09:54:17 2007 +0200
|
|
|
|
make show_boot_progress () weak.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 907902472391b6ca1876ec300687562ecaf459b1
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Fri Jul 13 08:26:05 2007 +0200
|
|
|
|
[PCS440EP] - The DIAG LEDs are now blinking, if an error occur
|
|
- fix compile error, if BUILD_DIR is used
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit a2e1c7098cf9574386b0c96841dfc8ea5cc93578
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Jul 12 16:32:08 2007 +0200
|
|
|
|
ppc4xx: Change receive buffer handling in the 4xx emac driver
|
|
|
|
This change fixes a bug in the receive buffer handling, that
|
|
could lead to problems upon high network traffic (broadcasts...).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 239f05ee4dd4cfe0b50f251b533dcebe9e67c360
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Jul 12 01:45:34 2007 +0200
|
|
|
|
Update CHANGELOG, minor coding style cleanup.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 5a56af3b522ba47fb33a3fee84d23bf1e5429654
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Fri Jun 8 16:41:18 2007 -0500
|
|
|
|
Remove erroneous errata code from Marvel 88E1111S driver
|
|
|
|
The Marvel 88E1111S driver for the TSEC was copied from the
|
|
88E1101 driver, and included a fix for an erratum which does not
|
|
exist on that part. Now it is removed
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 982efcf23fd03647e01e2fbe28a7a36239156cc0
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue Jun 5 16:38:44 2007 -0500
|
|
|
|
From: eran liberty <eran.liberty@gmail.com>
|
|
|
|
adds the reset register to 85xx immap
|
|
|
|
Signed-off-by: Eran Liberty <eran.liberty@gmail.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit d3ec0d943a045bdb99e159e7bbc77430e09f11d7
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Thu May 10 17:50:01 2007 -0500
|
|
|
|
Polished the 85xx ADS config files
|
|
|
|
Made the boot commands use device trees by default.
|
|
Also moved the ramdisk to 1000000 (I think the previous address
|
|
was getting overridden during boot).
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit bfb37b32d1b0b03f18077dba49cc66a6e76fa038
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed May 9 11:03:32 2007 -0500
|
|
|
|
8544ds: Fix Makefile after moving pixis to board/freescale.
|
|
|
|
The OBJTREE != SRCTREE build scenario was broken.
|
|
This fixes it.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2a3cee43c3b71fa5b8d91db19f05067865290f3e
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed May 9 00:54:20 2007 -0500
|
|
|
|
tsec: Fix PHY code to match first driver
|
|
|
|
Jarrold Wen noticed that the generic PHY code always matches
|
|
under the current implementation. Change it so the first match
|
|
wins, and *only* unknown PHYs trigger the generic driver
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit ccc091aac61a38cd998d575d92f7232e256d6312
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue May 8 17:27:43 2007 -0500
|
|
|
|
Add support for CPM device tree configuration to 8560 ADS
|
|
|
|
* Adds code to modify CPM frequencies
|
|
* Cleans up the config file to #define TSEC and (for now) #undef FCC
|
|
* Adds the MII command for all 8560 ADS configurations
|
|
* Updates config file to provide convenience commands for booting
|
|
with a device tree
|
|
|
|
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 7507d56ccaf7aae1c474342a9a5540165cd7e9d9
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Tue May 8 17:23:02 2007 -0500
|
|
|
|
Fix Marvell 88e1145 PHY init code
|
|
|
|
Fix a bug in the Marvell 88e1145 PHY init code in the TSEC driver
|
|
where the reset was being done after the errata code instead of
|
|
before.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 5dc210dec5bace98a50b6ba905347890091a9bb0
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Jul 11 14:52:16 2007 -0500
|
|
|
|
Add simple agent/end-point configuration in PCI AutoConfig for PCI_CLASS_PROCESSOR_POWERPC.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
commit e8b85f3ba4cd8930e0a2fea2100c815d64201765
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Jul 11 14:52:08 2007 -0500
|
|
|
|
pciauto setup bridge
|
|
|
|
The P2P bridge bus numbers programmed into the device are relative to
|
|
hose->first_busno.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
commit 571f49fa717004ca4268b4e24057efc7bf9f987b
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Jul 11 14:52:01 2007 -0500
|
|
|
|
Support PCIe extended config registers
|
|
|
|
FSL PCIe block has extended cfg registers in the 100 and 400 range.
|
|
For example, to read the LTSSM register: pci display <busn>.0 404 1
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
commit ba5feb12581bb2912ce301e4866b71f846e9fc07
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Jul 11 14:51:48 2007 -0500
|
|
|
|
Minor improvements to drivers/pci_auto.c
|
|
|
|
- Make pciauto_{pre,post}scan_setup_bridge non-static
|
|
- Added physical address display in debug messages.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
commit 40e81addab7bb74d20ddf681ce9babc880a828ee
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Jul 11 14:51:35 2007 -0500
|
|
|
|
Start pci hose scan from hose->current_busno.
|
|
|
|
Ensure hose->current_busno is not less than first_busno. This fixes
|
|
broken board code which leaves current_busno=0 when first_busno is
|
|
greater than 0 for the cases with multiple controllers.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
commit 3865b1fb7843a08ad49a6319a36415752276ff48
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jul 11 12:13:53 2007 +0200
|
|
|
|
Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit fa1df308926a6f70e3504c57514ef27ac31fd13a
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Jul 11 20:11:07 2007 +0200
|
|
|
|
CM1.QP1: Support for the Schindler CM1.QP1 board.
|
|
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 96e1d75be8193ca79e4215a368bf9d7f2362450f
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Wed Jul 11 18:39:11 2007 +0200
|
|
|
|
[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
|
|
- now the Flash ST M29W040B is supported (not tested)
|
|
- fix the "led" command
|
|
- fix compile error, if BUILD_DIR is used
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit e9514751cfa5cce61ea699fa0d3eb37898a5eeb5
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sun Jul 8 13:44:27 2007 +0200
|
|
|
|
Fix malloc problem introduced with the relocation fixup for the PPC platform
|
|
|
|
The relocation fixup didn't handle the malloc pointer initialization
|
|
correctly. This patch fixes this problem. Tested successfully on 4xx.
|
|
The relocation fixup patches for 4xx will follow soon.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 0dca874db62718e41253659e60f3a1de7eb418ce
|
|
Author: TsiChung <tcliew@Goku.(none)>
|
|
Date: Tue Jul 10 15:45:43 2007 -0500
|
|
|
|
Cache update and added CFG_UNIFY_CACHE
|
|
|
|
Enabled cache in cpu_init_f() for faster flash to mem allocation. Updated cache handling in start.S. Applied cache invalidate in fec_send() and fec_recv(). Added CFG_UNIFY_CACHE for CF V3 only.
|
|
|
|
Signed-off-by: TsiChung <tcliew@Goku.(none)>
|
|
|
|
commit 52b017604a8f4d4a795880ef6e7861d7f2f1b005
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:36:16 2007 -0500
|
|
|
|
Update header file. Include dtimer_intr_setup(). Changed timer divider to global define.
|
|
|
|
Include immap.h and timer.h. Moved dtimer interrupt setup to dtimer_intr_setup() from cpu/mcf532x/interrupts.c. Changed (CFG_CLK /1000000) -1 << 8 to CFG_TIMER_PRESCALER
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 5cdc07c7ef8f08ea55d3c47ed9221d91aa6d5fac
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:31:25 2007 -0500
|
|
|
|
Update header files
|
|
|
|
Include immap.h and renamed mcfrtc.h to rtc.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 2870e98ac8e5553e9187b12a47e5f46babb53990
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:29:21 2007 -0500
|
|
|
|
Add mcffec_initialize()
|
|
|
|
Added mcffec_initialize() in eth_initialize()
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 45a25bfd0c52f8a3fa137216bc94d32f90bedc5d
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:27:40 2007 -0500
|
|
|
|
Update header file and clean up
|
|
|
|
Include immap.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 0cee9c66318602c856a899ae5fa7579ccba6443a
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:23:15 2007 -0500
|
|
|
|
New uart structure and defines
|
|
|
|
Seperated from mcfuart.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit a90e79de8d99e9c9d69d60bfff9f24c337165900
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:22:31 2007 -0500
|
|
|
|
New timer structure and defines
|
|
|
|
Seperated from mcftimer.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit e04acb2eba4782489417240eff76e20e176aec10
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:21:09 2007 -0500
|
|
|
|
Rename mcfrtc to rtc
|
|
|
|
Since it is already in m68k folder, un-necessary to pad mcf. Replaced immap_5329.h and m5329.h to immap.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 2bd806fe4fc23958b8f78778199e7a6e3f8f6ad5
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:17:36 2007 -0500
|
|
|
|
Rename mcfserial.c. Update include header
|
|
|
|
Renamed mcfserial.c to mcfuart.c. Modified Makefile for mcfuart.o from mcfserial.o. Replace immap_5329.h and m5329.h to immap.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit f2208fbc2eb9de3f4285bfaa021c6ebae16c9b0e
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:13:58 2007 -0500
|
|
|
|
Header file update, clean up and cache handling
|
|
|
|
Replaced immap_5329.h and m5329.h with immap.h. Included cache_invalid.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 2e3f25ae9082daa9f5d181db45dfbc2e52ce0f97
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:10:40 2007 -0500
|
|
|
|
Create interrupts.c and modify Makefile
|
|
|
|
interrupt_init() and dtimer_intr_setup() are placed in interrupts.c. Added interrupts.o to Makefile
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit ddd104f1ed655eda50c06ba636237a83ed943f34
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:06:55 2007 -0500
|
|
|
|
Enable Icache
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit b9bf3de377b2bae70c983c9b97feae914999e735
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:05:31 2007 -0500
|
|
|
|
Update header file and some clean up
|
|
|
|
Replaced immap_5329.h and m5329.h with immap.h. Removed whitespaces.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 84a015b52ec820a5ae173717d78516de731c89c2
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:03:28 2007 -0500
|
|
|
|
Update header file and enable icache
|
|
|
|
Replaced immap_5329.h and m5329.h with immap.h. Enabled icache_enable() in cpu_init_r().
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 7a17e759c7a8b58e910daf54df611e94fc8ca074
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 23:01:22 2007 -0500
|
|
|
|
Update header file and removed interrupt_init()
|
|
|
|
Replace immap_5329.h and m5329.h with immap.h. Removed interrupt_init() and placed it in interrupts.c
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 3b635492c95bd0d6e08f93f699821cba1f602a64
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:57:46 2007 -0500
|
|
|
|
Update for flash.o and mii.o
|
|
|
|
Removed flash.o and added mii.o
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit c5ded275d839e4ff79f41718d50a835d989f57bc
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:56:19 2007 -0500
|
|
|
|
MII functions calls.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 427c814104560e29bda14955c67703245aaaa5b4
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:54:42 2007 -0500
|
|
|
|
Removed MII functions and replaced immap_5329.h and m5329.h with immap.h.
|
|
|
|
The removed MII routines will be placed in mii.c.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 01a793fda09c63df5a496f09dc1c7cb26e6751a2
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:51:05 2007 -0500
|
|
|
|
Duplicate code
|
|
|
|
There is a Common Flash Interface Driver existed. To use the CFI driver, define CFG_FLASH_CFI in configuration file.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 2744354a8437b8f78db178e30660215688bff570
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:46:38 2007 -0500
|
|
|
|
Seperate old structure defines and new structure defines
|
|
|
|
Removed new uart structure and defines to uart.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 2bd58608dbcff8890ca9a0c59e861ac24f8bb230
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:45:01 2007 -0500
|
|
|
|
Seperate old structure defines and new structure defines
|
|
|
|
New timer structure and defines will move to new timer.h
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 8cd5cd6de4ff92e03978338ed7aeb3ce7b7b9784
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:42:23 2007 -0500
|
|
|
|
Clean up
|
|
|
|
Removed whitespace
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 514871f565dd8bd1121e4a3ac1665a790e20b8f2
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:41:24 2007 -0500
|
|
|
|
Clean up
|
|
|
|
Replaced whitespace with tabs
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit 48dbfeabc7afffe30609a4489f10c22cb67ef7dd
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:39:07 2007 -0500
|
|
|
|
Create new header file and move peripherals base address from configs file to new header file.
|
|
|
|
Create new header file to include immap_5xxx.h and m5xxx.h and to share among drivers without update in driver file each processor is added. Moved peripherals base address and defines from configs file to immap.h.
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit be296e31c4411f96d9cb3d2afc8fcb006867abfa
|
|
Author: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Thu Jul 5 22:24:58 2007 -0500
|
|
|
|
Revert file mode
|
|
|
|
Changed MAKEALL file mode to executable, removed executable file mode from Makefile
|
|
|
|
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit b3aff0cb9ecf236d7e8c93761dd1dadf6837a582
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 11:19:50 2007 -0500
|
|
|
|
disk/ doc/ lib_*/ and tools/: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ddb5d86f0215bcb6c293510c50eb050e92883b7a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 11:13:21 2007 -0500
|
|
|
|
drivers/: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f40a7f3e3888b42a43674b099e5470022c8c544c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 11:07:56 2007 -0500
|
|
|
|
fs/: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 610f2e9c28a9c101e09fa1b78143cf5f00ed1593
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 11:05:02 2007 -0500
|
|
|
|
net/: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 902531788376046da212afd1661cffb62f3daa1c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 11:02:44 2007 -0500
|
|
|
|
common/: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d39b57415838c73fb0a37eca84de3c68ba990586
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 10:48:22 2007 -0500
|
|
|
|
board/[j-z]*: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 77a318545d57aefa844752465b94c7e09a3f26d0
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 10:39:10 2007 -0500
|
|
|
|
board/[A-Za-i]*: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
|
|
Those always evaluated TRUE, and thus were always compiled
|
|
even when IDE really wasn't defined/wanted.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 068b60a0eb7e73b243ca55399f2a7df76e2c3f3d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 10:27:39 2007 -0500
|
|
|
|
cpu/ rtc/ include/: Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 079a136c3588814784561d6e4856970ee82d6e2a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 10:12:10 2007 -0500
|
|
|
|
include/configs/[p-z]* + misc: Cleanup BOOTP and lingering CFG_CMD_*.
|
|
|
|
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
|
|
used to be included but CONFIG_BOOTP_MASK was not defined.
|
|
|
|
Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 7f5c01577400c74cc5bac74f41dd0d3c79df623c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 09:38:02 2007 -0500
|
|
|
|
include/configs/[g-o]*: Cleanup BOOTP and lingering CFG_CMD_*.
|
|
|
|
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
|
|
used to be included but CONFIG_BOOTP_MASK was not defined.
|
|
|
|
Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 80ff4f99b84b64edca3fd10da365ec1493be1c95
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 09:29:01 2007 -0500
|
|
|
|
include/configs/[a-e]*: Cleanup BOOTP and lingering CFG_CMD_*.
|
|
|
|
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
|
|
used to be included but CONFIG_BOOTP_MASK was not defined.
|
|
|
|
Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a1aa0bb502e25fd598b5e0ccdfb2c174921d714a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 09:22:23 2007 -0500
|
|
|
|
include/configs/[P-Z]*: Cleanup BOOTP and lingering CFG_CMD_*.
|
|
|
|
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
|
|
used to be included but CONFIG_BOOTP_MASK was not defined.
|
|
|
|
Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 659e2f6736232a08acca8785c206e2b4d9cd07d7
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 09:10:49 2007 -0500
|
|
|
|
include/configs/[J-O]*: Cleanup BOOTP and lingering CFG_CMD_*.
|
|
|
|
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
|
|
used to be included but CONFIG_BOOTP_MASK was not defined.
|
|
|
|
Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 11799434c5ff15a612577bb1ad1f4ea1a0595e4b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Jul 10 09:02:57 2007 -0500
|
|
|
|
include/configs/[A-I]*: Cleanup BOOTP and lingering CFG_CMD_*.
|
|
|
|
Explicitly add in default CONFIG_BOOTP_* options where cmd_confdefs.h
|
|
used to be included but CONFIG_BOOTP_MASK was not defined.
|
|
|
|
Remove lingering references to CFG_CMD_* symbols.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1fe80d79c5c4e52d3410a7ab4b8515da095cdab3
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 22:08:34 2007 -0500
|
|
|
|
Finally retire cmd_confdefs.h and CONFIG_BOOTP_MASK!
|
|
|
|
All of the choices for CONFIG_BOOTP_ are now documented in
|
|
the README file. You must now individually select exactly
|
|
the set that you want using a series of
|
|
#define CONFIG_BOOTP_<x>
|
|
statements in the board port config files now.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d3b8c1a743dcd31625c99e6a44590f207eb00028
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 21:57:31 2007 -0500
|
|
|
|
include/configs/[m-z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2fd90ce575b02d189cbf443c85309bcd001aa393
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 21:48:26 2007 -0500
|
|
|
|
include/configs/[a-m]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 37d4bb70586659dedef1658ce1bed071be098aec
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 21:38:02 2007 -0500
|
|
|
|
include/configs/[T-Z]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 18225e8dd1950bd6dbf35011e436db7f474c187d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 21:31:24 2007 -0500
|
|
|
|
include/configs/[P-S]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 7be044e4ea644b0ef1c486dadc1a4c2665b4374d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 21:24:19 2007 -0500
|
|
|
|
include/configs/[H-N]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 5d2ebe1b3ef0055c661bb1a0d252bf252380069f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 21:16:53 2007 -0500
|
|
|
|
include/configs/[A-G]*: Directly use CONFIG_BOOTP_* symbols rather than CONFIG_BOOTP_MASK.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f55f7f8d83f36021ab1f0e3d738f5d8c8083a7e3
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 19:12:30 2007 -0500
|
|
|
|
Retire CONFIG_COMMANDS finally.
|
|
Strip old CFG_CMD_* symbols out.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b5501f7d720fed99ab0b42c83f5dea52868ce007
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 19:10:03 2007 -0500
|
|
|
|
Update README.* to reference new CONFIG_CMD_* names now.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4431283c7e6d54ae180d466e51bf2d97471a0ad9
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 19:06:00 2007 -0500
|
|
|
|
cpu/m*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 3a1ed1e1f922c419bb71f7df4949d783ade369fa
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:57:22 2007 -0500
|
|
|
|
cpu/[7a-ln-z]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ab3abcbabd840928fb1eb5122118ca466b5e5013
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:45:16 2007 -0500
|
|
|
|
board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 3fe00109a5f12de55b6e25b1f98dfc24bc9090c9
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:38:39 2007 -0500
|
|
|
|
board/[m-p]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit c508a4cefd8a953fc64957650506a035e6e3d9d1
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:31:28 2007 -0500
|
|
|
|
board/[f-l]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b9307262f8a9f3b5c9e15a6067eadc17407146f6
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:24:55 2007 -0500
|
|
|
|
board/[d-e]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit fcec2eb93e126400009729328e797f12bc94f1fd
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:19:09 2007 -0500
|
|
|
|
board/[A-Za-c]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a593814f2be0c9cdc3133cd550b167b8a988328f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:10:50 2007 -0500
|
|
|
|
rtc/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 67350568f9d46e66c21829f3513b3db0caeb948b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:05:38 2007 -0500
|
|
|
|
lib_{arm,avr32,blackfin,generic,i386}/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 7def6b34f910f08d7ef0a14646da067719237ca2
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 18:02:11 2007 -0500
|
|
|
|
lib_{m68k,microblaze,mips,ppc}/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit dd60d1223b99a88a7216f3e041fe40634ad4c2bb
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:56:50 2007 -0500
|
|
|
|
fs/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit c91898bbc505aff3e12a807af88e76da18efb7ee
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:46:09 2007 -0500
|
|
|
|
tools/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 643d1ab23960950b52e0a2803c2d3ea4c558fa01
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:45:14 2007 -0500
|
|
|
|
net/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit cb51c0bf88f95a1bca68324b0126f8eed8b43273
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:39:42 2007 -0500
|
|
|
|
drivers/[n-z]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 07d38a17e964aec4c7827f0ee9a583bc8cc1ad6b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:30:01 2007 -0500
|
|
|
|
drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit cde5c64d17cf4834aa7b5c373f288bc7dad27b29
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:22:37 2007 -0500
|
|
|
|
disk/: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 639221c76c88215bd55af83ad174fc30d1940f8f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Jul 9 17:15:49 2007 -0500
|
|
|
|
include/: Remove obsolete references to CONFIG_COMMANDS
|
|
Mostly removed from comments here.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4ef218f6fdf8d747f4589da5252b004e7d2c2876
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Jul 10 00:01:28 2007 +0200
|
|
|
|
Coding style cleanup; update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit c8603cfbd4573379a6076c9c208545ba2bbf019a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jul 9 11:00:24 2007 +0200
|
|
|
|
Small coding style cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 0f92c7e7c9a62755b1457d3c46f93c8c1f6c19fc
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Mon Jul 9 10:10:08 2007 +0200
|
|
|
|
Migrate esd 405EP boards to new NAND subsystem
|
|
|
|
Remove unused CFG_NAND_LEGACY define
|
|
|
|
These boards to not have NAND.
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Mon Jul 9 10:10:06 2007 +0200
|
|
|
|
Migrate esd 405EP boards to new NAND subsystem
|
|
|
|
Migrate esd 405EP boards to new NAND subsystem
|
|
|
|
-cleanup
|
|
-use correct io accessors (in/out_be32())
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit e09f7ab5749c345f924da272bea0521a73af5b11
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Mon Jul 9 10:10:04 2007 +0200
|
|
|
|
Migrate esd 405EP boards to new NAND subsystem
|
|
|
|
This patch prepares the migration from the legacy NAND driver
|
|
to U-Boot's new NAND subsystem for esd boards.
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit c3517f919d0f61650cf3027fd4faf0f631142f6c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 18:10:08 2007 -0500
|
|
|
|
common/* non-cmd*: Remove obsolete references to CONFIG_COMMANDS
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit fd9bcaa35be64fe41a4223fdb6ecdbad52470b39
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 18:05:39 2007 -0500
|
|
|
|
common/cmd_[p-x]*: Remove obsolete references to CONFIG_COMMANDS.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit c76fe47425afc7d5d670ff0539823c85d65d9c42
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 18:02:23 2007 -0500
|
|
|
|
common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit baa26db4113679b80970ff447d91cc10217742a6
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 17:51:39 2007 -0500
|
|
|
|
common/cmd_[af]*: Remove obsolete references to CONFIG_COMMANDS.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit af075ee96e52dda7b6bca6c937588aeaaec5f2cd
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 17:02:01 2007 -0500
|
|
|
|
Clear up confusion over the CMD_POST and POST_DIAG mess.
|
|
|
|
For some reason, CONFIG_POST permeated as CONFIG_CMD_POST_DIAG
|
|
when it really means just CONFIG_CMD_DIAG. There is no CMD_POST.
|
|
Clear this mess up some.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b3631487105a57ab7cbadfc26efbaf9676275018
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 15:45:08 2007 -0500
|
|
|
|
Remove references to the old cmd_confdefs.h include file.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a22d4da95e20049b4daa1c2a022f61e8a72f2fb6
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 15:42:59 2007 -0500
|
|
|
|
include/configs: Catch some CONFIG_CMD_* conversion stragglers.
|
|
|
|
Use new CONFIG_CMD_* in lwmon5.h board config file.
|
|
Fix CONFIG_CMD_* typo braindamage in omap1510inn.h
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a5562901661bd428f7e5feb333f796372cb81019
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 15:31:57 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various [TUVWZYZ]* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit fe7f782d5b8c64a0195c68c31a0a11d4f641355e
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 15:02:44 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various S* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit e9a0f8f15c11f337967aa0600ad6e8af33037f50
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 15:12:40 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various R* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 12aa9fd23d724bd6ab88e1baa0db35133a27303f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 14:55:07 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various Q* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit acf0269779422f3e147d2ddfb499c9f6ff10ad5e
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 14:49:44 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various P* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit e18a1061a8630cb67995fdf99afd3fb50d1b187d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 14:21:43 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various [NO]* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8353e139bfad9059c54f5b2421f1a3090e15a2e2
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 14:14:17 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various M* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 348f258f24253433e4a2302a0bbceb6740a67246
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 13:46:18 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various [IJKL]* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 6c4f4da9bfc9f9403f54fce678ed0364b7c86a6a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sun Jul 8 10:09:35 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various H* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 60a0876b5106b34220e459c208bbf648073306c0
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sat Jul 7 21:04:26 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various F* and G* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit dcaa71562826a2466e894c868d132509dcda8444
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sat Jul 7 20:56:05 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various E* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 3c3227f3c737502311b25b72084573901cbbf17d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Sat Jul 7 20:40:43 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various D* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 49cf7e8ee7ef943fdfe866ce28410b0bfbf6a26c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jul 5 19:52:35 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various C* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit de8b2a6e33298dcdb10bdda48db25e53c3089eba
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jul 5 19:32:07 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various B* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 498ff9a228485bd4b9f23d066bada268f9add1dd
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jul 5 19:13:52 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various A* named board config files.
|
|
|
|
Since ADS860.h includes "board/fads/fads.h" with ramifications
|
|
on the CONFIG_COMMAND treatment, it too has to be adjusted to
|
|
exclude already configured commands in this same commit.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 10e038932f22ee80ebd53de312531e70e6590a2f
|
|
Author: Thomas Knobloch <knobloch@siemens.com>
|
|
Date: Fri Jul 6 14:58:39 2007 +0200
|
|
|
|
[NAND] Bad block skipping for command nboot
|
|
|
|
The old implementation of command nboot does not support reading the image from
|
|
NAND flash with skipping of bad blocks. The patch implements a new version of
|
|
the nboot command: by calling nboot.jffs2 from the u-boot command line the
|
|
command will load the image from NAND flash with respect to bad blocks (by using
|
|
nand_read_opts()). This is similar to e.g. the NAND read command: "nand
|
|
read.jffs2 ...".
|
|
|
|
Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 334043f601a90ac53e5ecc846fbb73a1ef38cb1f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jul 6 12:26:51 2007 +0200
|
|
|
|
ppc4xx: Update lwmon5 default environment
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 5d187430a055d62f17ca84d75e7245439d1f7e75
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jul 6 11:48:24 2007 +0200
|
|
|
|
ppc4xx: Update lwmon5 board
|
|
|
|
Add unlock=yes environment variable to default variables to unlock
|
|
the CFI flash by default.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6b0a174a1e6f55e1f5a1fbb223cdad7645a4646e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jul 6 09:45:47 2007 +0200
|
|
|
|
Fix problem with get/setdcr commands introduced by cfg patches
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit f1152f8c28db4a22087c21c618a3f7baa48e9a4f
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Fri Jul 6 02:50:19 2007 +0200
|
|
|
|
Code cleanup and default config update for STC GP3 SSA board.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit e4dbe1b215f5c6c462e76909d240bd96472b84de
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Jul 5 17:56:27 2007 +0200
|
|
|
|
Fixing some typos etc. introduced mainly by cfg patches.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit b6b4684546809f89c8bac72863ca49b5fd8ac0cd
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Jul 5 11:12:16 2007 +0200
|
|
|
|
Minor coding style cleanup. Update CHANGELOG.
|
|
|
|
commit dca3b3d6d6396b67e5e84af53452164923c73443
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:46 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 6c18eb9804b525f3e4f3bb3d014dd69a200d9fa7
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:38 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various t* and u* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 46da1e96b7db14f4fcd2c92544e7c0862024bc76
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:30 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various s* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 90cc3eb6d2be856d9ddd81436de9cf343bc6b5c8
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:23 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various q* and r* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 26a34560d56a9df5bc2ae23525d9229736134757
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:17 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various p* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a5cb23092a7d31490a33d4ec871468b63babfa3c
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:13 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various o* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 929a2bfd142737003a8fc32e1b86e1f2c1850257
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:07 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various n* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 5dc11a511960d490f7f01ffd746edfe6277f99b0
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:33:01 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various m* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 9bbb1c0820c1fbd3811ab6ee4ba0f6c6f76b27e4
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:57 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various l* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit bc234c129fa04fb9fa33530930e5cbc6084cd47a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:51 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various j* and k* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1d2c6bc491969f8d8fb34c8e30e8bea7a2af9c31
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:32 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various i* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 48d5d102a2f2e619c92050b9aedbb69689185bc0
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:25 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various h* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 72eb0efaed7048afcc61fc6f0085c49394b5dc36
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:19 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various g* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1bec3d3002d3bbbae6f2468a0f7376db1120d33e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:10 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various e* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ab999ba1b31ebe78dd16374394a55d7c6e5aa6e4
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:32:03 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various d* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 37e4f24b87fa255ae456d193b7cd23c18dd1d56b
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:31:56 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various c* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ba2351f9d1e841bd00ea6dad1e3c16d0259ad264
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:31:49 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various b* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 0b361c916617aff79e647b40f0e43361e0bbaccf
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:31:42 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various a* named board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b730cda82e362df6a22f4c59c0a9b97e885b1014
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:31:35 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in mpc5xx board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d794cfefead5fc177cf4f41164e80382e9c9484a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:31:15 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in various 5200 board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ef0df52ab49eea4a30c15087fd27d54c1d946f2c
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:31:07 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in STx board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 866e3089bfc826bb4dc74637f8aad87a3bab79fc
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:30:58 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in sbc* board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2694690e285acaa34922f55f4b5ae030da60c55a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:30:50 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in TQM board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1cc4c458329765b58e584a19821e796b3c10e976
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:30:28 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in 82xx board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8ea5499afdaba0acf60923dd99001c399d4a7c8e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jul 4 22:30:06 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in 83xx board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b44896215a09c60fa40cae906f7ed207bbc2c492
|
|
Author: Sergei Poselenov <sposelenov@emcraft.com>
|
|
Date: Thu Jul 5 08:17:37 2007 +0200
|
|
|
|
Merged POST framework with the current TOT.
|
|
|
|
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
|
|
|
|
commit b24629fa377214d63bb40d1360e354b6d3e4af56
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 13 13:23:15 2007 -0500
|
|
|
|
mpc86xx: Remove old CFG_CMD_* references.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 46175d9764da129bb4fd341cd2554dc7d55f5b2a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 13 13:22:54 2007 -0500
|
|
|
|
Add MPC8568MDS to MAKEALL 85xx target.
|
|
|
|
It was missing from the original port submission.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2835e518c969e5124ba1174eef3e8375e12fa7d5
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 13 13:22:08 2007 -0500
|
|
|
|
include/configs: Use new CONFIG_CMD_* in 85xx board config files.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 56b304ac2091689506088a9ae67f63fd6300cf16
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 13 13:21:37 2007 -0500
|
|
|
|
Fix #if typo in CONFIG_CMD_* changes.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f780b83316d9af1f61d71cc88b1917b387b9b995
|
|
Author: Niklaus Giger <niklausgiger@gmx.ch>
|
|
Date: Wed Jun 27 18:11:38 2007 +0200
|
|
|
|
resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPX
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
|
|
|
|
commit 04e6c38b766eaa2f3287561563c9e215e0c3a0d4
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jul 4 10:06:30 2007 +0200
|
|
|
|
ppc4xx: Update lwmon5 board
|
|
|
|
- Add optional ECC generation routine to preserve existing
|
|
RAM values. This is needed for the Linux log-buffer support
|
|
- Add optional DDR2 setup with CL=4
|
|
- GPIO50 not used anymore
|
|
- Lime register setup added
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6810a34677dbc446334f5e451f1682426dd33b49
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:17:28 2007 -0600
|
|
|
|
Fix Makefile to use $(MKCONFIG) macro for all board ports
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 90b1b2d69b9396ff2f01165ebc16c9a594eb5926
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:17:28 2007 -0600
|
|
|
|
Fix Makefile to use $(MKCONFIG) macro for all board ports
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 057004f4a4863554d56cc56268bfa7c7d9738e27
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:49 2007 -0600
|
|
|
|
Correct fixup relocation for mpc83xx
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 5af61b2f4b838a05f79be274f3e5a66edd2d9c96
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:44 2007 -0600
|
|
|
|
Correct fixup relocation for mpc8260
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f3a52fe05923935db86985daf9438e2f70ac39aa
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:39 2007 -0600
|
|
|
|
Correct fixup relocation for mpc824x
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit a85dd254c0577fca13627c46e93fc2ad4c4f1f00
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:34 2007 -0600
|
|
|
|
Correct fixup relocation for mpc8220
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 6f7576b20ecf0d040c3ac3b032b5cbc860e38a90
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:29 2007 -0600
|
|
|
|
Correct fixup relocation for MPC5xxx
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 3649cd99ba815b6601868735765602f00ef3692b
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:24 2007 -0600
|
|
|
|
Correct relocation fixup for mpc5xx
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f82b3b6304b620ef7e28bfaa1ea887a2ad2fa325
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:19 2007 -0600
|
|
|
|
Don't set gd->reloc_off if relocation of .fixup works correctly
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit e1a6144c32dc7de73bcdd33995de0148cbd0bd28
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:14 2007 -0600
|
|
|
|
Remove obsolete mpc83xx linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 17e32fc3908bf7089d3f16fc82a1c3ae674dd65b
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:09 2007 -0600
|
|
|
|
Consolidate mpc8260 linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit af7d38b393690d7eeaf418ac85a1e831a50d5fd0
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:34:04 2007 -0600
|
|
|
|
Remove obsolete mpc824x linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f94a3aecebc40ca0939c7d66d010009cf51be9e2
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:59 2007 -0600
|
|
|
|
Remove obsolete mpc824x linker scripts (3 of 4)
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit a71c084f3ac7fedf144537db2b2da47323068833
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:53 2007 -0600
|
|
|
|
Remove obsolete mpc824x linker scripts (2 of 4)
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f670a15468d1365241d40022b9408e1004181f5e
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:48 2007 -0600
|
|
|
|
Remove obsolete mpc824x linker scripts (1 of 4)
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 09555bd45a04c0e54f172528d21bc18896550d28
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:43 2007 -0600
|
|
|
|
Remove obsolete mpc8220 linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 5efb992f046e51225c93d52f80fecbe433abd789
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:38 2007 -0600
|
|
|
|
Remove obsolete mpc5xxx linker scripts (3 of 3)
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 07c13dfef65b31647e69d8b61daa1eec598add1a
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:33 2007 -0600
|
|
|
|
Remove obsolete mpc5xxx linker scripts (2 of 3)
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit b4f67513a624ce85866c66c575bd2d9d7977d7f0
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:28 2007 -0600
|
|
|
|
Remove obsolete mpc5xxx linker scripts (1 of 3)
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit b7d8e05f8675249b5f208aa73babeed384a4519d
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:23 2007 -0600
|
|
|
|
Remove obsolete mpc5xx linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 416a0b6d40f6eba3a2fc547253c16bda28d922f7
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:18 2007 -0600
|
|
|
|
Consolidate mpc83xx linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 5fc59175b92883ed5d2666a04e6bc49e70a4a365
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:13 2007 -0600
|
|
|
|
Consolidate mpc8260 linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 737f9eb02d7335df2b3e4d7a4d3348784d1da207
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:08 2007 -0600
|
|
|
|
Consolidate mpc824x linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 9c757b789a59a855db57b448dd825329c4e9c4a0
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:33:03 2007 -0600
|
|
|
|
Consolidate mpc8220 linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit d181c9a15cd41863fe24840d17848429f27d3c8c
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:32:58 2007 -0600
|
|
|
|
Consolidate mpc5xxx linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 287ac924adb7291bebe5086652a362a30ab28b13
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Jul 3 00:32:53 2007 -0600
|
|
|
|
Consolidate mpc5xx linker scripts
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 52b8704d0245e589f86d462e9ec25aeb7ecbbbdd
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Jul 4 00:43:53 2007 +0200
|
|
|
|
Fix a few file permission problems.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 78e0cf2de7be7f1eaeeb622eb61fd50e4d5e205c
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Jul 4 00:38:38 2007 +0200
|
|
|
|
Minor coding style cleanup. Rebuild CHANGELOG file.
|
|
|
|
commit 2f9c19e496acb6bb50d9299e1aab377625d48c38
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:44 2007 -0500
|
|
|
|
configs/ mpc86xx: Rewrite command line options using new CONFIG_CMD-* style.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 602ad3b33d9ceef83dbab46be68646d645d637ee
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:39 2007 -0500
|
|
|
|
README: Rewrite command line config to use CONFIG_CMD_* names.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 72a074cec68e5bad60d63206c050974e08afd804
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:34 2007 -0500
|
|
|
|
include/ non-config: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 5fcf543e0b6628c76ff48705b1b0566bfd11507b
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:28 2007 -0500
|
|
|
|
tools/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 9107ebe0d352420895ab69b715697bdebc8caf50
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:23 2007 -0500
|
|
|
|
board/[k-z]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 5e378003d592ea828ec69d6defcd4de79096dd5c
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:19 2007 -0500
|
|
|
|
board/[Ma-i]*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 737184114ec9c9e0ab94d6713536126073bd2472
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:15 2007 -0500
|
|
|
|
cpu/ non-mpc*: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f48070fe5fe440dfb5ee5268c920de70e48ea327
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:08 2007 -0500
|
|
|
|
cpu/mpc*/ : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 0c505db0a0dc1f670b13ce3b4d3fbf1ec5b3cbd2
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:03:03 2007 -0500
|
|
|
|
lib_*/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 73f032021ec5f13cda8faa4e34b6de80960eb86f
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:58 2007 -0500
|
|
|
|
lib_ppc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 98b79003c21c2578206003256de4e781d6b36ca8
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:53 2007 -0500
|
|
|
|
rtc/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 6e2115acb6a892d53a6881bf253ae41d3df39156
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:49 2007 -0500
|
|
|
|
net/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 45cdb9b72c94655c7308b464a2666057c0b286e0
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:34 2007 -0500
|
|
|
|
disk/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4e109ae98294a5ca7ff848b7652c7bfd4023a94a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:20 2007 -0500
|
|
|
|
fs/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d5be43de93ff905c465e509d45a3164ef48d26e7
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:10 2007 -0500
|
|
|
|
drivers/: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b453960d4fdb87b3970d96119b90df2ed024fc4a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:02:05 2007 -0500
|
|
|
|
common/ non-cmd: Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:01:54 2007 -0500
|
|
|
|
common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a76adc8142c1d956385a109e0b70f9319ede4d66
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:01:43 2007 -0500
|
|
|
|
common/cmd_[a-f]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).
|
|
|
|
This is a compatibility step that allows both the older form
|
|
and the new form to co-exist for a while until the older can
|
|
be removed entirely.
|
|
|
|
All transformations are of the form:
|
|
Before:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
|
|
After:
|
|
#if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ec63b10b61fd68238d4c15c1cd04c0b38228e2c1
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Mon Jun 11 19:01:34 2007 -0500
|
|
|
|
Introduce initial versions of new Command Config files.
|
|
|
|
Derive three new files from cmd_confdefs.h:
|
|
config_bootp.h - Has BOOTP related config options, not commands
|
|
config_cmd_all.h - Has a CONFIG_CMD_* definition for every command
|
|
config_cmd_default.h - Has a CONFIG_CMD_* definition for default cmds.
|
|
|
|
For now, include "config_bootp.h" for compatability until all
|
|
users of it directly include it properly.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1f2a05898658900dc5717761e27abf2052e67e13
|
|
Author: Mushtaq Khan <mushtaqk_921@yahoo.co.in>
|
|
Date: Sat Jun 30 18:50:48 2007 +0200
|
|
|
|
Fix S-ATA support.
|
|
|
|
Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
|
|
|
|
commit a5d71e290f3673269be8eefb4ec44f53412f9461
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Mon Jun 25 19:11:37 2007 +0200
|
|
|
|
[PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b
|
|
Author: Niklaus Giger <niklaus.giger@nestal.com>
|
|
Date: Mon Jun 25 17:03:13 2007 +0200
|
|
|
|
ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt
|
|
|
|
This patch prints the DDR status registers upon machine check
|
|
interrupt on the 440EPx/GRx. This can be useful especially when
|
|
ECC support is enabled.
|
|
|
|
I added some small changes to the original patch from Niklaus to
|
|
make it compile clean.
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 807018fb7faceb429ce0cb47baa2073746b33a4e
|
|
Author: Niklaus Giger <niklaus.giger@nestal.com>
|
|
Date: Mon Jun 25 16:50:55 2007 +0200
|
|
|
|
ppc4xx: Fix O=buildir builds
|
|
|
|
This patch fixes the problem to assemble cpu/ppc4xx/start.S
|
|
experienced last week where building failed having specified
|
|
O=../build.sequoia.
|
|
|
|
Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
|
|
|
|
commit 466fff1a7bb5fe764a06450626f6098219f446b8
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jun 25 15:57:39 2007 +0200
|
|
|
|
ppc4xx: Add pci_pre_init() for 405 boards
|
|
|
|
This patch removes the CFG_PCI_PRE_INIT option completely, since
|
|
it's not needed anymore with the patch from Matthias Fuchs with
|
|
the "weak" pci_pre_init() implementation.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6f35c53166213c24a5a0e2390ed861136ff73870
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Sun Jun 24 17:41:21 2007 +0200
|
|
|
|
ppc4xx: Maintenance patch for esd's CPCI405 derivats
|
|
|
|
-add pci_pre_init() for pci interrupt fixup code
|
|
-disable phy sleep mode via reset_phy() function
|
|
-use correct io accessors
|
|
-cleanup
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Sun Jun 24 17:23:41 2007 +0200
|
|
|
|
ppc4xx: Add pci_pre_init() for 405 boards
|
|
|
|
This patch adds support for calling a plattform dependant
|
|
pci_pre_init() function for 405 boards. This can be used to
|
|
move the current pci_405gp_fixup_irq() function into the
|
|
board code.
|
|
|
|
This patch also makes the CFG_PCI_PRE_INIT define obsolete.
|
|
A default function with 'weak' attribute is used when
|
|
a board specific pci_pre_init() is not implemented.
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit 1636d1c8529c006d106287cfbc20cd0a246fe1cb
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Fri Jun 22 23:59:00 2007 +0200
|
|
|
|
Coding stylke cleanup; rebuild CHANGELOG
|
|
|
|
commit 2dc64451b4c08ffd619372abfdc2506a2e2363b9
|
|
Author: Igor Lisitsin <igor@emcraft.com>
|
|
Date: Wed Apr 18 14:55:19 2007 +0400
|
|
|
|
Adapt log buffer code to support Linux 2.6
|
|
|
|
A new environment variable, "logversion", selects the log buffer
|
|
behaviour. If it is not set or set to a value other than 2, then the
|
|
old, Linux 2.4.4, behaviour is selected.
|
|
|
|
Signed-off-by: Igor Lisitsin <igor@emcraft.com>
|
|
--
|
|
|
|
commit a11e06965ec91270c51853407ff1261d3c740386
|
|
Author: Igor Lisitsin <igor@emcraft.com>
|
|
Date: Wed Mar 28 19:06:19 2007 +0400
|
|
|
|
Extend POST support for PPC440
|
|
|
|
Added memory, CPU, UART, I2C and SPR POST tests for PPC440.
|
|
|
|
Signed-off-by: Igor Lisitsin <igor@emcraft.com>
|
|
--
|
|
|
|
commit 566a494f592ae3b3c0785d90d4e1ba45574880c4
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Fri Jun 22 19:11:54 2007 +0200
|
|
|
|
[PCS440EP] upgrade the PCS440EP board:
|
|
- Show on the Status LEDs, some States of the board.
|
|
- Get the MAC addresses from the EEProm
|
|
- use PREBOOT
|
|
- use the CF on the board.
|
|
- check the U-Boot image in the Flash with a SHA1
|
|
checksum.
|
|
- use dynamic TLB entries generation for the SDRAM
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 3a1f5c81b0b9557817a789bece839905581c2205
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 22 16:58:40 2007 +0200
|
|
|
|
ppc4xx: Fix problem with extended program_tlb() funtion
|
|
|
|
The recently extended program_tlb() function had a problem when
|
|
multiple TLB's had to be setup (for example with 512MB of SDRAM). The
|
|
virtual address was not incremented. This patch fixes this issue
|
|
and is tested on Katmai with 512MB SDRAM.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 02032e8f14751a1a751b09240a4f1cf9f8a2077f
|
|
Author: Rafal Jaworowski <raj@semihalf.com>
|
|
Date: Fri Jun 22 14:58:04 2007 +0200
|
|
|
|
[ppc] Fix build breakage for all non-4xx PowerPC variants.
|
|
|
|
- adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros
|
|
- minor 4xx cleanup
|
|
|
|
commit d677b32855f577ae2690dcd64a172cdd706e0ffc
|
|
Author: Mike Frysinger <vapier@gentoo.org>
|
|
Date: Fri Jun 22 10:34:12 2007 +0200
|
|
|
|
[patch] add nand_init() prototype to nand.h
|
|
|
|
since nand_init() is expected to be called by other parts of u-boot, there
|
|
should be a prototype for it in nand.h
|
|
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 83b4cfa3d629dff0264366263c5e94d9a50ad80b
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Jun 20 18:14:24 2007 +0200
|
|
|
|
Coding style cleanup. Refresh CHANGELOG.
|
|
|
|
commit b3f9ec86e388207fd03dcdf7b145b9ed080bf024
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jun 19 17:22:44 2007 +0200
|
|
|
|
ppc4xx: Add bootstrap command for AMCC Sequoia (440EPx) eval board
|
|
|
|
This patch adds a board command to configure the I2C bootstrap EEPROM
|
|
values. Right now 533 and 667MHz are supported for booting either via NOR
|
|
or NAND FLASH. Here the usage:
|
|
|
|
=> bootstrap 533 nor ;to configure the board for 533MHz NOR booting
|
|
=> bootstrap 667 nand ;to configure the board for 667MHz NNAND booting
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit df8a24cdd30151505cf57bbee5289e91bf53bd1b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jun 19 16:42:31 2007 +0200
|
|
|
|
[ppc4xx] Fix problem with NAND booting on AMCC Acadia
|
|
|
|
The latest changes showed a problem with the location of the NAND-SPL
|
|
image in the OCM and the init-data area (incl. cache). This patch
|
|
fixes this problem.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 86ba99e34194394052d24c04dc40d1263d29a26f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jun 19 16:40:58 2007 +0200
|
|
|
|
[ppc4xx] Change board/amcc/acadia/cpr.c to pll.c
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 8e585f02f82c17cc66cd229dbf0fd3066bbbf658
|
|
Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
|
|
Date: Mon Jun 18 13:50:13 2007 -0500
|
|
|
|
Added M5329AFEE and M5329BFEE Platforms
|
|
|
|
Added board/freescale/m5329evb, cpu/mcf532x, drivers/net,
|
|
drivers/serial, immap_5329.h, m5329.h, mcfrtc.h,
|
|
include/configs/M5329EVB.h, lib_m68k/interrupts.c, and
|
|
rtc/mcfrtc.c
|
|
|
|
Modified CREDITS, MAKEFILE, Makefile, README, common/cmd_bdinfo.c,
|
|
common/cmd_mii.c, include/asm-m68k/byteorder.h, include/asm-m68k/fec.h,
|
|
include/asm-m68k/io.h, include/asm-m68k/mcftimer.h,
|
|
include/asm-m68k/mcfuart.h, include/asm-m68k/ptrace.h,
|
|
include/asm-m68k/u-boot.h, lib_m68k/Makefile, lib_m68k/board.c,
|
|
lib_m68k/time.c, net/eth.c and rtc/Makefile
|
|
|
|
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
|
|
|
|
commit e73846b7cf1e29ae635bf9bb5570269663df2ee5
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 15 11:33:41 2007 +0200
|
|
|
|
[ppc4xx] Change lwmon5 port to work with recent 440 exception rework
|
|
|
|
Now CONFIG_440 has to be defined in all PPC440 board config files.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit efa35cf12d914d4caba942acd5a6c45f217de302
|
|
Author: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Date: Fri Jun 15 11:19:28 2007 +0200
|
|
|
|
ppc4xx: Clean up 440 exceptions handling
|
|
|
|
- Introduced dedicated switches for building 440 and 405 images required
|
|
for 440-specific machine instructions like 'rfmci' etc.
|
|
|
|
- Exception vectors moved to the proper location (_start moved away from
|
|
the critical exception handler space, which it occupied)
|
|
|
|
- CriticalInput now serviced (with default handler)
|
|
|
|
- MachineCheck properly serviced (added a dedicated handler and return
|
|
subroutine)
|
|
|
|
- Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused,
|
|
unhandled and those not relevant for 4xx were eliminated)
|
|
|
|
- Eliminated Linux leftovers, removed dead code
|
|
|
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit b765ffb773f5a3cd5aa94ec76b6a05276b8cd5b2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 15 08:18:01 2007 +0200
|
|
|
|
[ppc4xx] Add initial lwmon5 board support
|
|
|
|
This patch adds initial support for the Liebherr lwmon5 board euqipped
|
|
with an AMCC 440EPx PowerPC.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 85f737376d5ff3d5f0d45a8b657686326d175307
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 15 07:39:43 2007 +0200
|
|
|
|
[ppc4xx] Extend 44x GPIO setup with default output state
|
|
|
|
The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup
|
|
is extended with the default GPIO output state (level).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit dbca208518e5e7f01a6420588d1cd6e60db74c2b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Jun 14 11:14:32 2007 +0200
|
|
|
|
[ppc4xx] Extend program_tlb() with virtual & physical addresses
|
|
|
|
Now program_tlb() allows to program a TLB (or multiple) with
|
|
different virtual and physical addresses. With this change, now one
|
|
physical region (e.g. SDRAM) can be mapped 2 times, once with caches
|
|
diabled and once with caches enabled.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9912121f7ed804ea58fd62f3f230b5dcfc357d88
|
|
Author: Detlev Zundel <dzu@denx.de>
|
|
Date: Wed May 23 19:02:41 2007 +0200
|
|
|
|
Change 'repeatable' attribute of some commands to sensible values.
|
|
|
|
Most prominently this changes 'erase' to be non-repeatable.
|
|
|
|
Signed-off-by: Detlev Zundel <dzu@denx.de>
|
|
|
|
commit 5afb202093f6a001797db92cf695b93a70ea9ab4
|
|
Author: Detlev Zundel <dzu@denx.de>
|
|
Date: Wed May 23 18:47:48 2007 +0200
|
|
|
|
Fix 'run' not to continue after interrupted command
|
|
|
|
Signed-off-by: Detlev Zundel <dzu@denx.de>
|
|
|
|
commit 9b7464a2c88614e1061f509c48930a3d240d1a35
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Mon Jun 11 15:14:24 2007 +0200
|
|
|
|
USB: This patch fix readl in ohci swap reg access.
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 8f8416fada9faf94b9a92f21fe6000643cb521d5
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Fri Jun 8 14:52:22 2007 +0200
|
|
|
|
TQM5200: Add Flat Device Tree support, update default env. accordingly.
|
|
|
|
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 9045f33c023f698660a2e45d1b2194c0711abebc
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Fri Jun 8 10:24:58 2007 +0200
|
|
|
|
Fix config problems on SC3 board; make ide_reset_timeout work.
|
|
|
|
commit fba3fb0449b8a54542aed1e729de76e7f5a2ff1b
|
|
Author: Benoît Monin <bmonin@adeneo.eu>
|
|
Date: Fri Jun 8 09:55:24 2007 +0200
|
|
|
|
[PATCH] fix gpio setting when using CFG_440_GPIO_TABLE
|
|
|
|
Set the correct value in GPIOx_TCR when configuring the gpio
|
|
with CFG_440_GPIO_TABLE.
|
|
|
|
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit f539edc076cfe52bff919dd512ba8d7af0e22092
|
|
Author: Vadim Bendebury <vbendeb@google.com>
|
|
Date: Thu May 24 15:52:25 2007 -0700
|
|
|
|
cosmetic changes to bcm570x driver
|
|
|
|
This is a cosmetic only changes submission.
|
|
It affects files relevant to bcm570x driver.
|
|
the commands used to generate this change was
|
|
|
|
cd drivers
|
|
Lindent -pcs -l80 bcm570x.c bcm570x_lm.h bcm570x_mm.h tigon3.c tigon3.h
|
|
|
|
The BMW target (the only one using this chip so far) builds cleanly, the
|
|
`before and after' generated object files for drivers/bcm570x.c and
|
|
drivers/tigon3.o are identical as reported by objdump -d
|
|
|
|
Signed-off-by: Vadim Bendebury <vbendeb@google.com>
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit 725671ccd2cd04c9ebc50c9e5a94dd8cbade66b7
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Jun 6 16:26:56 2007 +0200
|
|
|
|
Coding Style cleanup; generate new CHANGELOG file.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 19d763c35e0b5568eaf0b8adbf7a68ccfe7fa243
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Wed Jun 6 11:49:44 2007 +0200
|
|
|
|
TRAB, USB: update trab board configuration for use of generic ohci driver
|
|
|
|
commit dace45acd1c1357daa9322099d07c9a9e08b0024
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Wed Jun 6 11:49:43 2007 +0200
|
|
|
|
USB: ohci fixes and cleanup for ppc4xx and yosemite board.
|
|
|
|
commit 72657570b61635c74fa0c3f0e9e7d0671a9d08df
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Wed Jun 6 11:49:43 2007 +0200
|
|
|
|
USB: ohci fixes and cleanup for mpc5xxx and IceCube board config
|
|
|
|
commit fc43be478f2aa37ce38acd85355038866e4162af
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Wed Jun 6 11:49:35 2007 +0200
|
|
|
|
USB/OHCI: endianness cleanup in the generic ohci driver
|
|
|
|
commit c440bfe6d6d92d66478a7e84402b31f48413617b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jun 6 11:42:13 2007 +0200
|
|
|
|
ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board
|
|
|
|
This patch adds NAND booting support for the AMCC Acadia eval board.
|
|
|
|
Please make sure to configure jumper J7 to position 2-3 when booting
|
|
from NOR, and to position 1-2 when booting for NAND.
|
|
|
|
I also added a board command to configure the I2C bootstrap EEPROM
|
|
values. Right now only 267MHz is support for booting either via NOR
|
|
or NAND FLASH. Here the usage:
|
|
|
|
=> bootstrap 267 nor ;to configure the board for 267MHz NOR booting
|
|
=> bootstrap 267 nand ;to configure the board for 267MHz NNAND booting
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 18135125f909948b85d1d6881ab4ac0efb4a1c58
|
|
Author: Rodolfo Giometti <giometti@linux.it>
|
|
Date: Wed Jun 6 10:08:14 2007 +0200
|
|
|
|
Files include/linux/byteorder/{big,little}_endian.h define
|
|
__BIG_ENDIAN and __LITTLE_ENDIAN.
|
|
|
|
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
|
|
|
|
commit a81d1c0b85b13e9d45f2d87de96a51a6e0ef0f82
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Wed Jun 6 10:08:14 2007 +0200
|
|
|
|
Add USB PCI-OHCI, USB keyboard and event poll support to the
|
|
MPC8641HPCN board config file.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit 4dae14ce8fbdf380017dc54f172218e7d2acc889
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Wed Jun 6 10:08:14 2007 +0200
|
|
|
|
USB PCI-OHCI, interrupt pipe and usb event poll support
|
|
|
|
This patch added USB PCI-OHCI chips support, interrupt pipe support
|
|
and usb event poll support. For supporting the USB interrupt pipe, the
|
|
globe urb_priv is moved to purb in ed struct. Now, we can process
|
|
several urbs at one time. The interrupt pipe support codes are ported
|
|
from Linux kernel 2.4.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit fdcfaa1b02268b2899e374b35adf936c911a47eb
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Wed Jun 6 10:08:13 2007 +0200
|
|
|
|
USB event poll support
|
|
|
|
This patch adds USB event poll support, which could be used in usbkbd
|
|
and other usb devices driver when the asynchronous interrupt
|
|
processing is supported.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com
|
|
|
|
commit 9a1d00fa47c1e05e3fdb60b33213af4e18d4c18e
|
|
Author: Rodolfo Giometti <giometti@linux.it>
|
|
Date: Wed Jun 6 10:08:12 2007 +0200
|
|
|
|
ISP116x: delay for crappy USB keys
|
|
|
|
Using some (very) slow USB keys cause the USB host controller buffers
|
|
are not ready to be read by the CPU so we need an extra delay before
|
|
reading the USB storage data.
|
|
|
|
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
|
|
|
|
commit 09444143670c9c2243cb7aba9f70b3713d33bed1
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Wed Jun 6 10:08:12 2007 +0200
|
|
|
|
Change duplicate usb_cpu_init_fail to usb_board_init_fail
|
|
|
|
Thanks to Liew Tsi Chung <Tsi-chung.Liew@freescale.com> for pointing
|
|
this out.
|
|
|
|
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
|
|
|
|
commit 32922cdc470fdfd39bea0c1c4f582d3fb340421e
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Tue Jun 5 12:30:52 2007 -0500
|
|
|
|
mpc8641 image size cleanup
|
|
|
|
e600 does not have a bootpg restriction.
|
|
Move the version string to beginning of image at fff00000.
|
|
Resetvec.S is not needed.
|
|
Update flash copy instructions.
|
|
Add tftpflash env variable
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit e3cbe1f93c5722f8ebbad468e30c069a2b511097
|
|
Author: Benoît Monin <bmonin@adeneo.eu>
|
|
Date: Mon Jun 4 08:36:05 2007 +0200
|
|
|
|
[PATCH] Fix ppc4xx bootstrap letter displayed on startup
|
|
|
|
The attached patch is mainly cosmetic, allowing u-boot to
|
|
display the correct bootstrap option letter according to the
|
|
datasheets.
|
|
|
|
The original patch was extended with 405EZ support by Stefan
|
|
Roese.
|
|
|
|
Signed-off-by: Benoit Monin <bmonin@adeneo.eu>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 5b1313fb2758ffce8b624457f777d8cc6709608d
|
|
Author: Nikita V. Youshchenko <yoush@debian.org>
|
|
Date: Wed May 23 12:45:19 2007 +0400
|
|
|
|
fix compilation problem for mpc8349itx CFG_RAMBOOT
|
|
|
|
Current include/configs/MPC8349ITX.h does contain some support for building
|
|
image that will be started from memory (without putting in into flash).
|
|
It could be triggered by building with TEXT_BASE set to a low value.
|
|
|
|
However, this support is incomplete: using of low TEXT_BASE causes
|
|
defining configuration macros in inconsistent way, which later leads
|
|
to compilation errors. In particular. flash support is being disabled,
|
|
but then flash structures get referenced.
|
|
|
|
This patch fixes this, making it possible to build with low TEXT_BASE.
|
|
|
|
Signed-Off-By: Nikita Youshchenko <yoush@debian.org>
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 8a364f0970de49949d635e60accf463c6443ef8c
|
|
Author: Nikita V. Youshchenko <yoush@debian.org>
|
|
Date: Wed May 23 12:45:25 2007 +0400
|
|
|
|
add missing 'console' var to default mpc8349itx config
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 18d156eb37c90fadc8ec7a81a3b89176161f85b7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 16:18:17 2007 +0200
|
|
|
|
ppc4xx: Add missing file for Bamboo NAND booting support
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 155a96478a0881e6da96cbbbcf34952d6a3b1b4b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:58:19 2007 +0200
|
|
|
|
ppc4xx: Undo Sequoia patch for dynamic EBC speed support of 83MHz
|
|
|
|
This patch undoes the patch by Jeff Mann with commit-id ada4697d. As
|
|
suggested by AMCC it is not recommended to dynamically change the EBC
|
|
speed after bootup. So we undo this change to be on the safe side.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9d9096043e8f713d4bf1743d32e1459e6a11644b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:29:04 2007 +0200
|
|
|
|
ppc4xx: Update Sequoia NAND booting support with ECC
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cf959c7d6687567c308e366e9581e1a5aff5cc5b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:27:11 2007 +0200
|
|
|
|
ppc4xx: Add NAND booting support for AMCC Bamboo (440EP) eval board
|
|
|
|
This patch adds NAND booting support for the AMCC Bamboo eval board.
|
|
Since the NAND-SPL boot image is limited to 4kbytes, this version
|
|
only supports the onboard 64MBytes of DDR. The DIMM modules can't be
|
|
supported, since the setup code for I2C DIMM autodetection and
|
|
configuration is too big for this NAND bootloader.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 42be56f53c8b107868e6125c8524ae84293e95a7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:23:04 2007 +0200
|
|
|
|
NAND: Add ECC support to NAND booting support in nand_spl/nand_boot.c
|
|
|
|
The U-Boot NAND booting support is now extended to support ECC
|
|
upon loading of the NAND U-Boot image.
|
|
|
|
Tested on AMCC Sequoia (440EPx) and Bamboo (440EP).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a471db07fbb65a841ffc9f4f112562b945230f98
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:19:29 2007 +0200
|
|
|
|
ppc4xx: Prepare Bamboo port for NAND booting support
|
|
|
|
This patch updates the "normal" Bamboo NOR booting port, so
|
|
that it is compatible with the coming soon NAND booting
|
|
Bamboo port.
|
|
|
|
It also enables the 2nd NAND flash on the Bamboo.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 53ad02103fb8be4138a9937a8ab91fcdff7b4987
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:16:58 2007 +0200
|
|
|
|
ppc4xx: Update in_be32() functions and friends to latest Linux version
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 91da09cfbce0c1de05d6d84aa8363d666fa7ea3c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:15:12 2007 +0200
|
|
|
|
NAND: Add hardware ECC support to the PPC4xx NAND driver ndfc.c
|
|
|
|
This patch adds hardware ECC support to the NDFC driver. It also
|
|
changes the register access from using the "simple" in32/out32
|
|
functions to the in_be32/out_be32 functions, which make sure
|
|
that the access is correctly synced. This is the only recommended
|
|
access to SoC registers in the current Linux kernel.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 17b5e862287cca76f19dcf8b741e61a7d06617f2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:12:15 2007 +0200
|
|
|
|
NAND: Update nand_ecc.c to latest Linux version
|
|
|
|
This patch updates the nand_ecc code to the latest Linux version.
|
|
The main reason for this is the more compact code. This makes
|
|
it possible to include the ECC code into the NAND bootloader
|
|
image (NAND_SPL) for PPC4xx.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d2d432760d2199d0e8558fdd9d1789b8131abcf7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 15:09:50 2007 +0200
|
|
|
|
ppc4xx: 44x DDR driver code cleanup and small fix for Bamboo
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e4bbed2803a2ad0521c7362f5d3e065f99abaedc
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 13:45:24 2007 +0200
|
|
|
|
ppc4xx: Change Luan config file to support ECC
|
|
|
|
With the updated 44x DDR2 driver the Luan board now supports
|
|
ECC generation and checking.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 7187db73491c8de0fb56efb5e5134ba5ec443089
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jun 1 13:45:00 2007 +0200
|
|
|
|
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
|
|
|
|
Add config option for 180 degree advance clock control as needed
|
|
for the AMCC Luan eval board.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ee1529838abbfaa35f14e3ffbeaaba693159475f
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu May 31 17:20:09 2007 +0200
|
|
|
|
Add support for STX GP3SSA (stxssa) Board with 4 MiB flash.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 7049288fb1f16f1b317140226cdebd07bd416395
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 17:26:46 2007 +0200
|
|
|
|
Motion-PRO: Code cleanup, fix of a typo in OF_STDOUT_PATH.
|
|
|
|
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 4520fd4d2c450da49637216aa0e53739b61c60ac
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 17:06:36 2007 +0200
|
|
|
|
Motion-PRO: Add support for redundant environment.
|
|
|
|
Enable redundant environment, add a MTD partition for it; also add env.
|
|
variable command for passing MTD partitions to the kernel command line.
|
|
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit a26eabeec31746f06d309103690892805696e344
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 17:05:11 2007 +0200
|
|
|
|
Motion-PRO: Change maximum console buffer size from 256 to 1024 bytes.
|
|
|
|
Allow passing longer command line to the kernel - useful especially
|
|
for passing MTD partition layout.
|
|
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 9160b96f71483a116de81c68985e8ee306d36764
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 17:04:18 2007 +0200
|
|
|
|
Fix: Add missing NULL termination in strings expanded by macros parser.
|
|
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 630ec84aef7228fc1dbfb38dec78541403a786cd
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 17:03:37 2007 +0200
|
|
|
|
Motion-PRO: Update EEPROM's page write bits and write delay.
|
|
|
|
Change EEPROM configuration according to the datasheet: "The 24C01A and 24C02A
|
|
have a page write capability of two bytes", and "This device offers fast (1ms)
|
|
byte write". Add 3ms of extra delay.
|
|
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit c00125e07c1ebc125bab40e1e18bceed8be0c162
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 16:58:45 2007 +0200
|
|
|
|
MPC5XXX, Motion-PRO: Fix PHY initialization problem.
|
|
|
|
After being reset in mpc5xxx_fec_init_phy(), PHY goes into FX mode, in which
|
|
networking does not function. This commit switches PHY to TX mode by clearing
|
|
the FX_SEL bit of Mode Control Register. It also reverses commit
|
|
008861a2f3ef2c062744d733787c7e530a1b8761, i.e., a temporary workaround.
|
|
|
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 93b78f534a6e708b4cf1a4ffb4d8438c67a007db
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 16:57:15 2007 +0200
|
|
|
|
Motion-PRO: Add support for the temperature sensor.
|
|
|
|
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit c75e639630cc132dc19cd1ecda5922c0db0bfbba
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 16:55:23 2007 +0200
|
|
|
|
Motion-PRO: Add displaying of CPLD revision information during boot.
|
|
|
|
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit c99512d6bd3973f01ca2fc4896d829b46e68f150
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 16:53:43 2007 +0200
|
|
|
|
MPC5xxx: Change names of defines related to IPB and PCI clocks.
|
|
|
|
Both CFG_PCISPEED_66 and CFG_IPBSPEED_133 are misnamed, as defining
|
|
them does not cause PCI or IPB clocks to run at the specified speed.
|
|
Instead, they configure divisors used to calculate said clocks. This
|
|
patch renames the defines according to their real function.
|
|
|
|
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit a11c0b85dc3664bb3c1e781137118730c8f619ab
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sun May 27 16:51:48 2007 +0200
|
|
|
|
Motion-PRO: Add LED support.
|
|
|
|
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
|
|
Signed-off-by: Marian Balakowicz <m8@semihalf.com>
|
|
Acked-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
|
|
commit 7ebb4479b07ff294eb4d76e420753a0349f7c93b
|
|
Author: Ulf Samuelsson <ulf@atmel.com>
|
|
Date: Thu May 24 12:12:47 2007 +0200
|
|
|
|
[PATCH][NAND] Define the Vendor Id for Micron NAND Flash
|
|
|
|
Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d756894722c888d09a9fa1df8323753772d3dcce
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu May 24 09:49:00 2007 +0200
|
|
|
|
ppc4xx: Fix small 405EZ OCM initilization bug in start.S
|
|
|
|
As pointed out by Bruce Adler <bruce.adler@acm.org> this patch
|
|
fixes a small bug in the 405EZ OCM initialization. Thanks for
|
|
spotting.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 5d4a179013d59a76446462e1eb0a969fba63eb81
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu May 24 08:22:09 2007 +0200
|
|
|
|
ppc4xx: Update AMCC Acadia support for board revision 1.1
|
|
|
|
This patch updates the Acadia (405EZ) support for the new 1.1 board
|
|
revision. It also adds support for NAND FLASH via the 4xx NDFC.
|
|
|
|
Please note that the jumper J7 must be in position 2-3 for this
|
|
NAND support. Position 1-2 is for NAND booting only. NAND booting
|
|
support will follow later.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 822d55365bb557e084d0e33625a6dedcc866110b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed May 23 14:09:46 2007 -0500
|
|
|
|
Add LIST_86xx MAKEALL target for PowerPC builds.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 9f0077abd69f7a7c756a915b961037302be3e6f2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue May 22 12:48:09 2007 +0200
|
|
|
|
ppc4xx: Use do { ... } while (0) for CPR & SDR access macros
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6f3dfc139a838b0841c151efe00ad47db2366e79
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue May 22 12:46:10 2007 +0200
|
|
|
|
ppc4xx: Add 405 support to 4xx NAND driver ndfc.c
|
|
|
|
This patch adds support for 405 PPC's to the 4xx NAND driver
|
|
ndfc.c. This is in preparation for the new AMCC 405EZ.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 10603d76767426be803dadd4fb688b97eb69481c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon May 21 07:41:22 2007 +0200
|
|
|
|
ppc4xx: Fix problem in 405EZ OCM initialization
|
|
|
|
As spotted by Bruce Adler this patch fixes an initialization problem
|
|
for the 405EZ OCM.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 3e3b956906eba9e4ad7931581ecedaad10eccce8
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Fri May 18 16:47:03 2007 +0100
|
|
|
|
Reduce line lengths to 80 characters max.
|
|
|
|
commit 93ef45c9ddfdd9fc17c4e74bd8e2f2456580eb72
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Fri May 18 14:34:07 2007 +0100
|
|
|
|
Makefile permissions
|
|
|
|
commit 1443a31457d68f7e8f0b9403e9832ec1e79dc59d
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Fri May 18 14:33:11 2007 +0100
|
|
|
|
Makefile permissions
|
|
|
|
commit 255a3577c848706441daee0174543efe205a77f8
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed May 16 16:52:19 2007 -0500
|
|
|
|
Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx
|
|
|
|
For all practical u-boot purposes, TSECs don't differ throughout the
|
|
mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 70124c2602ae2d4c5d3dba05b482d91548242de8
|
|
Author: Stefano Babic <sbabic@denx.de>
|
|
Date: Wed May 16 14:49:12 2007 +0200
|
|
|
|
Fix compile problem cause my Microblaze merge
|
|
|
|
Signed-off-by: Stefano Babic <sbabic@denx.de>
|
|
|
|
commit ada4697d0230d6da552867777f98a67ec3ba2579
|
|
Author: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Date: Wed May 16 13:23:10 2007 +0200
|
|
|
|
[PATCH] Run new sequoia boards with an EBC speed of 83MHz
|
|
|
|
Because the Sequoia board does not boot with an EBC faster than 66MHz,
|
|
the clock divider are changed after the initial boot process.
|
|
|
|
This allows for maximum clocking speeds to be achieved on newer boards.
|
|
Sequoia boards with 666.66 MHz processors require that the EBC divider
|
|
be set to 3 in order to start the initial boot process at a slower EBC
|
|
speed. After the initial boot process, the divider can be set back to 2,
|
|
which will cause the boards to run at 83.333MHz. This is backward
|
|
compatible with boards with 533.33 MHz processors, as these boards will
|
|
already be set with an EBC divider of 2.
|
|
|
|
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
|
|
commit a7676ea7732f3c596805079fed7e5c9fac652cfc
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed May 16 01:16:53 2007 +0200
|
|
|
|
Minor Coding Style cleanup, update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit d62f64cc23a940eafe712c776b3249e4160753d1
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed May 16 00:13:33 2007 +0200
|
|
|
|
Coding Style Cleanup, new CHANGELOG
|
|
|
|
commit 3162eb836903c8b247fdc7470dd39bfa6996f495
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue May 15 23:38:05 2007 +0200
|
|
|
|
Minor coding style cleanup.
|
|
|
|
commit 66d9dbec1cc27d6398ee6cf84639dbe14971251e
|
|
Author: mushtaq khan <mushtaq_k@procsys.com>
|
|
Date: Fri Apr 20 14:23:02 2007 +0530
|
|
|
|
Add driver for S-ATA-controller on Intel processors with South
|
|
Bridge, ICH-5, ICH-6 and ICH-7.
|
|
|
|
Implementation:
|
|
|
|
1. Code is divided in to two files. All functions, which are
|
|
controller specific are kept in "drivers/ata_piix.c" file and
|
|
functions, which are not controller specific, are kept in
|
|
"common/cmd_sata.c" file.
|
|
|
|
2. Reading and Writing from the S-ATA drive is done using PIO method.
|
|
|
|
3. Driver can be configured for 48-bit addressing by defining macro
|
|
CONFIG_LBA48, if this macro is not defined driver uses the 28-bit
|
|
addressing.
|
|
|
|
4. S-ATA read function is hooked to the File system, commands like
|
|
ext2ls and ext2load file can be used. This has been tested.
|
|
|
|
5. U-Boot command "SATA_init" is added, which initializes the S-ATA
|
|
controller and identifies the S-ATA drives connected to it.
|
|
|
|
6. U-Boot command "sata" is added, which is used to read/write, print
|
|
partition table and get info about the drives present. This I have
|
|
implemented in same way as "ide" command is implemented in U-Boot.
|
|
|
|
7. This driver is for S-ATA in native mode.
|
|
|
|
8. This driver does not support the Native command queuing and
|
|
Hot-plugging.
|
|
|
|
Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
|
|
|
|
commit 644e6fb4eb8be90ea04ba34b643a8bf019d680e0
|
|
Author: mushtaq khan <mushtaq_k@procsys.com>
|
|
Date: Mon Apr 30 15:57:22 2007 +0530
|
|
|
|
Fixes bug clearing the bss section for i386
|
|
|
|
Hi,
|
|
There is a bug in the code of clearing the bss section for processor
|
|
i386.(File: cpu/i386/start.S)
|
|
In the code, bss_start addr (starting addr of bss section) is put into
|
|
the register %eax, but the code which clears the bss section refers to
|
|
the addr pointed by %edi.
|
|
|
|
This patch fixes this bug by putting bss_start into %edi register.
|
|
|
|
Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
|
|
|
|
commit c3243cf7b490057277d61acffe4ad0946f9eb4a4
|
|
Author: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
Date: Mon Apr 30 16:47:28 2007 -0500
|
|
|
|
Add support for BCM5464 Quad Phy
|
|
|
|
Added support for Broadcom's BCM5464 Quad Phy
|
|
|
|
Signed-off-by: Joe Hamman <joe.hamman@embeddedspecialties.com>
|
|
|
|
commit 1b305bdc754c8468e1d5d858f5dcf8a7a0a4bb7a
|
|
Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
|
|
Date: Wed May 9 08:10:57 2007 +0800
|
|
|
|
Search the exception table with linear algorithm
|
|
|
|
Search the exception table with linear algorithm instead of
|
|
bisecting algorithm.
|
|
Because the exception table might be unsorted.
|
|
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 5dfaa50eb819686bfba1927e8c5b8a70a4d65fd3
|
|
Author: Aubrey.Li <aubrey.adi@gmail.com>
|
|
Date: Mon May 14 11:47:35 2007 +0800
|
|
|
|
Fix compilation issues on MACOSX
|
|
|
|
Singed-off-by: Marc Hoffman <Marc.Hoffman@analog.com>
|
|
Signed-off-by: Aubrey Li <aubrey.adi@gmail.com>
|
|
|
|
commit 56fd7162985c412317bbf763a225fba23c64fd31
|
|
Author: Stephen Williams <steve@icarus.com>
|
|
Date: Tue May 15 07:55:42 2007 -0700
|
|
|
|
Fix for compile of JSE target
|
|
|
|
The attached patch fixes the compile of the JSE board in the
|
|
denx git as of 14 may 2007. It is an extremely simple patch,
|
|
it just adds the missing define of CFG_SYSTEMACE_WIDTH.
|
|
|
|
Fix to compile JSE against 20070514 git of u-boot
|
|
|
|
commit 61936667e86a250ae12fd2dc189d3588f0a59e0b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri May 11 12:01:49 2007 +0200
|
|
|
|
ppc4xx: Add mtcpr/mfcpr access macros
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 343c48bd84606c4025c8a7c7263fda465d6e284c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri May 11 12:01:06 2007 +0200
|
|
|
|
ppc4xx: Set bd->bi_pci_busfreq on 440EPx/GRx too
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 7d98ba770a7eaefa29ce927f31a0956df85bf650
|
|
Author: Piotr Kruszynski <ppk@semihalf.com>
|
|
Date: Thu May 10 16:55:52 2007 +0200
|
|
|
|
[Motion-PRO] Add MTD and JFFS2 support, also add default partition
|
|
definition.
|
|
|
|
commit 65fb6a676e821f9570a2a376dc204bf611ce5f81
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Wed May 9 11:42:44 2007 +0100
|
|
|
|
Add the board directory for SMN42
|
|
|
|
commit 160131bf965785419626df6c388729fe0b597992
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Wed May 9 11:41:58 2007 +0100
|
|
|
|
Add the files for the SMN42 board
|
|
|
|
commit 5c6d2b5a500f8c49670de8910150b78a41f781fc
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Wed May 9 11:40:34 2007 +0100
|
|
|
|
Remove the deleted files for the SMN42 patch
|
|
|
|
commit b0d8f5bf0d215adc9424cb228b2484dbf07f7761
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Wed May 9 11:37:56 2007 +0100
|
|
|
|
New board SMN42 branch
|
|
|
|
commit 29f3be0caf0799ca6b89dfd9824c15619a50000f
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Wed May 9 10:24:38 2007 +0100
|
|
|
|
Makefile permissions
|
|
|
|
commit b84289b595731e8851df46e893845cc1322c9b9b
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Tue May 8 14:17:07 2007 -0500
|
|
|
|
8641hpcn: Fix Makefile after moving pixis to board/freescale.
|
|
|
|
The OBJTREE != SRCTREE build scenario was broken.
|
|
This fixes it.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit e69f66c6ebe82bbbd1da766bc4eda40ec7ee5af1
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Tue May 8 15:57:43 2007 +0200
|
|
|
|
add: reading special purpose registers
|
|
|
|
commit 1a50f164beb065f360fbddb76029607d6b099698
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Tue May 8 14:52:52 2007 +0200
|
|
|
|
add: Microblaze V5 exception handling
|
|
|
|
commit ab874d5047e5d30dbc1e517ff26083efffa98ecb
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Tue May 8 14:39:11 2007 +0200
|
|
|
|
add: FSL control read and write
|
|
|
|
commit de1de02a7cbf05e6b63e0d8ffc624f12493f6ba3
|
|
Author: Piotr Kruszynski <ppk@semihalf.com>
|
|
Date: Tue May 8 13:05:44 2007 +0200
|
|
|
|
[Motion-PRO] Add support for I2C, EEPROM and RTC.
|
|
|
|
commit fa5c2ba123b1bf88455bfc21db5e786ca045029d
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue May 8 10:23:56 2007 +0200
|
|
|
|
[Motion-PRO] Add ATA support. Add CF-booting commands to the default
|
|
environment.
|
|
|
|
commit 06241d50a3ab1b20a0b08baeeaffcaa23ae4b839
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue May 8 09:39:12 2007 +0200
|
|
|
|
[Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. This
|
|
eliminates networking problems in Linux (timeouts).
|
|
|
|
commit 1f1369c34b629be94702684d41d3fddf0f6193e7
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue May 8 09:21:57 2007 +0200
|
|
|
|
[Motion-PRO] Enable Flat Device Tree support and modify default environment
|
|
to allow booting of FDT-expecting kernels.
|
|
|
|
commit fb05f6da35ea1c15c553abe6f23f656bf18dc5db
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 23:58:31 2007 +0200
|
|
|
|
new: USE_MSR_INTR support
|
|
|
|
commit 008861a2f3ef2c062744d733787c7e530a1b8761
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Mon May 7 22:36:15 2007 +0200
|
|
|
|
[MPC5xxx] There are networking problems on the Motion-PRO board with
|
|
current PHY initalization code (tftp timeouts all the time). This commit
|
|
temporarily disables PHY initalization sequence to make the networking
|
|
operational, until a fix is found.
|
|
|
|
commit abca901869c3760b6c5fecb825db6c1d91a78a93
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon May 7 22:10:36 2007 +0200
|
|
|
|
Get rid of duplicated file (see include/configs/sbc8560.h instead)
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 207b7b2c9d9752e0f6478c30c29b7087f6e6cbb6
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon May 7 22:07:08 2007 +0200
|
|
|
|
Get rid of duplicated file (see doc/README.SBC8560 instead)
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit a7bac7e9b57ba948051beb19ec5be3a75ce75383
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 19:43:10 2007 +0200
|
|
|
|
fix: read and write MSR - repair number of parameters
|
|
|
|
commit 193b4a3bb3acaddf798da8de0da05d94ba8774ee
|
|
Author: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Date: Mon May 7 19:42:49 2007 +0200
|
|
|
|
[PATCH] ppc4xx: Fix CONFIG_SYS_CLK_FREQ definition in Sequoia config file
|
|
|
|
A '3' got cut off in the formatting of the last patch to automatically
|
|
change the clock speed of the system clock on sequoia board.
|
|
|
|
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 19bf1fbad7f19d5a120be9b1daf136e052fcab39
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 19:33:51 2007 +0200
|
|
|
|
new: fsl interrupt support
|
|
FSL_Has_data is connected to INTC.
|
|
|
|
commit 792032baa7d625e34c981ab6df521911bd8dc861
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 19:30:12 2007 +0200
|
|
|
|
fix: interrupt handler
|
|
remove asm code
|
|
|
|
commit f3f001a341ef185d0f13841be5b5dc3395aacc31
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 19:25:08 2007 +0200
|
|
|
|
fix: remove asm code
|
|
|
|
commit fb7c2dbef02c9f6f8d7b04ec4c2bfb91418b9c01
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 19:12:43 2007 +0200
|
|
|
|
fix: clean interrupt
|
|
|
|
commit 42efed6130c8fcf7da881385b5427065d2801757
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 17:22:25 2007 +0200
|
|
|
|
fix: interrupt handler for multiple sources
|
|
|
|
commit 48fbd3a4cdabbebc1debd7eed73c00c2caf914f6
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Mon May 7 17:11:09 2007 +0200
|
|
|
|
new: add writing to msr register
|
|
|
|
commit 3a619dd7bed03e8b4d22a3911f90fd12af5376c2
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon May 7 16:43:56 2007 +0200
|
|
|
|
Fix an ancient CHANGELOG conflict
|
|
|
|
commit ac4cd59d59c9bf3f89cb7a344abf8184d678f562
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Sat May 5 08:12:30 2007 +0200
|
|
|
|
5xxx: write MAC address to mac-address and local-mac-address
|
|
|
|
Some device trees have a mac-address property, some have local-mac-address,
|
|
and some have both. To support all of these device trees, ftp_cpu_setup()
|
|
should write the MAC address to mac-address and local-mac-address, if they
|
|
exist.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit a9d87e2707dcb249f6bb7f7ff7e00acd8cda9fd2
|
|
Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
|
|
Date: Sun Apr 29 14:01:54 2007 +0200
|
|
|
|
[PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
|
|
|
|
MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
|
|
message. Use PVR to distinguish between the two variants, and print proper CPU
|
|
information.
|
|
|
|
Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
|
|
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 4ec5bd55ed1ffa91a774af298769621f4fbb18c1
|
|
Author: Ladislav Michl <ladis@linux-mips.org>
|
|
Date: Wed Apr 25 16:01:26 2007 +0200
|
|
|
|
[PATCH] simplify silent console
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit b7598a43f2b421a713d8135e98a42c37d9eb9df0
|
|
Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
|
|
Date: Mon Apr 23 15:30:39 2007 +0200
|
|
|
|
[PATCH] Avoid assigning PCI resources from zero address
|
|
|
|
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
|
|
core complains and IDE drivers fails to work. Also, assigning zero to a BAR
|
|
was illegal according to PCI 2.1 (the later revisions seem to have excluded the
|
|
sentence about "0" being considered an invalid address) -- so, use a reasonable
|
|
starting value of 0x1000 (that's what the most Linux archs are using).
|
|
|
|
Alternatively, one might have fixed the calls to pci_set_region() individually
|
|
(some code even seems to have taken care of this issue) but that would have
|
|
been a lot more work. :-)
|
|
|
|
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9ffd451afeb08e5be7ddae680487ec962b2bca25
|
|
Author: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Date: Mon Apr 23 14:00:11 2007 +0200
|
|
|
|
[patch] setenv(...) can delete environmentalvariables
|
|
|
|
update setenv() function so that entering a NULL value for the
|
|
variable's value will delete the environmental variable
|
|
|
|
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ebd0a0ae05a44769c4e27458ad4e9f3438250443
|
|
Author: Mike Frysinger <vapier@gentoo.org>
|
|
Date: Mon Apr 23 13:54:24 2007 +0200
|
|
|
|
[patch] use unsigned char in smc91111 driver for mac
|
|
|
|
the v_mac variable in the smc91111 driver is declared as a signed char ...
|
|
this causes problems when one of the bytes in the MAC is "signed" like 0xE0
|
|
because when it gets printed out, you get a display like:
|
|
0xFFFFFFE0 and that's no good
|
|
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
commit ffc50f9bb194343c6303517a517708457a5eb6b8
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sat May 5 18:54:42 2007 +0200
|
|
|
|
new: FSL and MSR support #2
|
|
|
|
commit f7e2e0eb0668136305f78bb9c21be79b48a34247
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sat May 5 18:27:16 2007 +0200
|
|
|
|
new: FSL and MSR support
|
|
|
|
commit 2f15278c2eb911c668b4fe562130b78cf554d139
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat May 5 18:23:11 2007 +0200
|
|
|
|
Coding stylke cleanup; update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 885ec89b648a899a2f32393fd3ffd9f7234c4402
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat May 5 18:05:02 2007 +0200
|
|
|
|
Add STX GP3 SSA board to MAKEALL script; update CHANGELOG.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 5499645b3fe17a548af9dfc479ca6e2455f179a2
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat May 5 17:15:50 2007 +0200
|
|
|
|
Make "file" command happy with some config.mk files; update CHANGELOG
|
|
|
|
commit e3b8c78bc2489c27ae020986ef0eaca684866cef
|
|
Author: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Date: Sat May 5 08:32:14 2007 +0200
|
|
|
|
ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHz
|
|
|
|
The AMCC Secquoia board has been changed in a new revision from using a
|
|
33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD
|
|
indicates the difference. This patch reads that bit and uses the correct
|
|
clock speed for the board. This code is backward compatable will all
|
|
prior boards. All prior boards will be read as 33.000.
|
|
|
|
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit f544ff6656fca263ed1ebe39899b6d95da67c8b8
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat May 5 08:29:01 2007 +0200
|
|
|
|
ppc4xx: Sequoia: Remove cpu/ppc4xx/speed.c from NAND booting
|
|
|
|
Using cpu/ppc4xx/speed.c to calculate the bus frequency is too big
|
|
for the 4k NAND boot image so define bus_frequency to 133MHz here
|
|
which is save for the refresh counter setup.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2f550ab976405300f5b07bf2890800840d0aa05f
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Sat May 5 08:12:30 2007 +0200
|
|
|
|
5xxx: write MAC address to mac-address and local-mac-address
|
|
|
|
Some device trees have a mac-address property, some have local-mac-address,
|
|
and some have both. To support all of these device trees, ftp_cpu_setup()
|
|
should write the MAC address to mac-address and local-mac-address, if they
|
|
exist.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit a79886590593ba1d667c840caa4940c61639f18f
|
|
Author: Thomas Knobloch <knobloch@siemens.com>
|
|
Date: Sat May 5 07:04:42 2007 +0200
|
|
|
|
NAND: Wrong calculation of page number in nand_block_bad()
|
|
|
|
In case that there is no memory based bad block table available the
|
|
function nand_block_checkbad() in drivers/mtd/nand/nand_base.c will call
|
|
nand_block_bad() directly. When parameter 'getchip' is set to zero,
|
|
nand_block_bad() will not right shift the offset to calculate the
|
|
correct page number.
|
|
|
|
Signed-off-by: Thomas Knobloch <knobloch@siemens.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9877d7dcd1eebe61aa5d8b8ffe9c048ea426e6f6
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Fri May 4 10:02:33 2007 +0200
|
|
|
|
Fix initrd length corruption in bootm command.
|
|
|
|
When using FDT Images, the length of an inital ramdisk was
|
|
overwritten (bug introduced by commit 87a449c8, 22 Aug 2006).
|
|
|
|
Patches by Timur Tabi & Johns Daniel.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 068aab660bc3912b930be5540e6b3f3fd6ad3c96
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu May 3 19:43:52 2007 -0500
|
|
|
|
mpc83xx: fix trivial error in MAKEALL
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit c64a89d6ce8584b9fc64f4e85da9ecac3cfc2c2a
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu May 3 16:34:41 2007 +0200
|
|
|
|
Update board configuration for STX GP3SSA board:
|
|
|
|
Enable hush shell, environment in flash rather in EEPROM,
|
|
more user-friendly default environment, etc.
|
|
The simple EEPROM environment can be selected easily in the board
|
|
config file.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 2c6fb199dc5756fc72f49d1f4de105e089049d65
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Apr 24 14:37:49 2007 +0200
|
|
|
|
Cleanup STX GP3SSA code; fix build and compile problems.
|
|
|
|
commit 35171dc04e028ecacc23ad916a66295472555dbf
|
|
Author: Dan Malek <dan@embeddedalley.com>
|
|
Date: Fri Jan 5 09:15:34 2007 +0100
|
|
|
|
Add support for STX GP3SSA (stxssa) Board
|
|
|
|
Signed-off-by Dan Malek, <dan@embeddedalley.com>
|
|
|
|
commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed May 2 13:31:53 2007 +0200
|
|
|
|
macb: Don't restart autonegotiation if we already have link
|
|
|
|
Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
|
|
link is already up.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 04fcb5d38bc90779cd9a710d60702075986f0e29
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed May 2 13:22:38 2007 +0200
|
|
|
|
macb: Introduce a few barriers when dealing with DMA descriptors
|
|
|
|
There were a few theoretical possibilities that the compiler might
|
|
optimize away DMA descriptor reads and/or writes and thus cause
|
|
synchronization problems with the hardware. Insert barriers where
|
|
we depend on reads/writes actually hitting memory.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit ffa621a0d12a1ccd81c936c567f8917a213787a8
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Sat Feb 24 01:08:13 2007 -0600
|
|
|
|
Cleaned up some 85xx PCI bugs
|
|
|
|
* Cleaned up the CDS PCI Config Tables and added NULL entries to
|
|
the end
|
|
* Fixed PCIe LAWBAR assignemt to use the cpu-relative address
|
|
* Fixed 85xx PCI code to assign powar region sizes based on the
|
|
config values (rather than hard-coding them)
|
|
* Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 6743105988fc44d5b0d30388c790607835aae7a6
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Apr 23 02:54:25 2007 -0500
|
|
|
|
Add support for the 8568 MDS board
|
|
|
|
This included some changes to common files:
|
|
* Add 8568 processor SVR to various places
|
|
* Add support for setting the qe bus-frequency value in the dts
|
|
* Add the 8568MDS target to the Makefile
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit af1c2b84bf27c8565baddc82d1abb93700d10e2e
|
|
Author: David Updegraff <dave@cray.com>
|
|
Date: Fri Apr 20 14:34:48 2007 -0500
|
|
|
|
Add support for treating unknown PHYs as generic PHYs.
|
|
|
|
When bringing up u-boot on new boards, PHY support sometimes gets
|
|
neglected. Most PHYs don't really need any special support,
|
|
though. By adding a generic entry that always matches if nothing
|
|
else does, we can provide support for "unsupported" PHYs for the
|
|
tsec.
|
|
|
|
The generic PHY driver supports most PHYs, including gigabit.
|
|
|
|
Signed-off-by: David Updegraff <dave@cray.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit a75af9bfd8fff0499efdbb90601cec5a2afef117
|
|
Author: James Yang <James.Yang@freescale.com>
|
|
Date: Wed Feb 7 15:28:04 2007 -0600
|
|
|
|
Conditionalize 8641 Rev1.0 MCM workarounds
|
|
|
|
Signed-off-by: James Yang <James.Yang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f64702b7fc8f8df39d31add770df6e372f9e9ce3
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Mon Apr 30 13:59:50 2007 -0500
|
|
|
|
Fix memory initialization on MPC8349E-mITX
|
|
|
|
Define CFG_DDR_SDRAM_CLK_CNTL for the MPC8349E-mITX and MPC8349E-mITX-GP.
|
|
This allows ddr->sdram_clk_cntl to be properly initialized. This is necessary
|
|
on some ITX boards, notably those with a revision 3.1 CPU.
|
|
|
|
Also change spd_sdram() in cpu/mpc83xx/spd_sdram.c to not write anything into
|
|
ddr->sdram_clk_cntl if CFG_DDR_SDRAM_CLK_CNTL is not defined.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
Acked-by: Michael Benedict <MBenedict@twacs.com>
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 54b2d434ae9d01787936f34fe1759cf3d7624ae3
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Mon Apr 30 15:26:21 2007 -0500
|
|
|
|
mpc83xx: replace elaborate boottime verbosity with 'clocks' command
|
|
|
|
and fix CPU: to align with Board: display text.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit c1ab82669d9525998c34e802a12cad662723f22a
|
|
Author: James Yang <James.Yang@freescale.com>
|
|
Date: Fri Mar 16 13:02:53 2007 -0500
|
|
|
|
Rewrote picos_to_clk() to avoid rounding errors.
|
|
Clarified that conversion is to DRAM clocks rather than platform clocks.
|
|
Made function static to spd_sdram.c.
|
|
|
|
Signed-off-by: James Yang <James.Yang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8b39501d28754e72726ce7fb02310e56dbdf116a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sun Apr 29 14:13:01 2007 +0200
|
|
|
|
ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driver
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9
|
|
Author: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
|
|
Date: Sun Apr 29 14:01:54 2007 +0200
|
|
|
|
[PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message
|
|
|
|
MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up
|
|
message. Use PVR to distinguish between the two variants, and print proper CPU
|
|
information.
|
|
|
|
Signed-off-by: Grzegorz Wianecki <grzegorz.wianecki@gmail.com>
|
|
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 5c5d3242935cf3543af01142627494434834cf98
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Apr 25 12:34:38 2007 -0500
|
|
|
|
mpc83xx: minor fixups for 8313rdb introduction
|
|
|
|
commit ada4d40091f6ed4a4f0040e08d20db21967e4a67
|
|
Author: Ladislav Michl <ladis@linux-mips.org>
|
|
Date: Wed Apr 25 16:01:26 2007 +0200
|
|
|
|
[PATCH] simplify silent console
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 144876a380f5756f57412caf74c1d6dc201dd796
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Tue Apr 24 23:01:02 2007 +0200
|
|
|
|
[PATCH] MTD partition support, JFFS2 support
|
|
|
|
commit 37ed6cdd4159195bfad68d8a237f6adda8f482cb
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Tue Apr 24 14:03:45 2007 +0200
|
|
|
|
ppc4xx: setup 440EPx/GRx ZMII/RGMII bridge depending on PFC register content.
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit 66ed6cca3f340f7a8a06d9272ae2ef8e96f0273d
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Apr 23 02:37:47 2007 -0500
|
|
|
|
Reworked 85xx speed detection code
|
|
|
|
Changed the code to read the registers and calculate the clock
|
|
rates, rather than using a "switch" statement.
|
|
|
|
Idea from Andrew Klossner <andrew@cesa.opbu.xerox.com>
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 81f481ca708ed6a56bf9c410e3191dbad581c565
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Apr 23 02:24:28 2007 -0500
|
|
|
|
Enable 8544 support
|
|
|
|
* Add support to the Makefile
|
|
* Add 8544 configuration support to the tsec driver
|
|
* Add 8544 SVR numbers to processor.h
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 0d8c3a2096eaff8d7de89d45e9af4d4b0d4868fe
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Fri Feb 23 17:12:25 2007 -0600
|
|
|
|
Support 1G size on 8548
|
|
|
|
e500v2 and newer cores support 1G page sizes.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 45cef612cc601d2d1c890fbbd7cdc9609a189a46
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Fri Feb 23 17:11:16 2007 -0600
|
|
|
|
Changed BOOKE_PAGESZ_nGB to BOOKE_PAGESZ_nG
|
|
|
|
The other pagesz constants use one letter to specify order of
|
|
magnitude. Also change the one reference to it in mpc8548cds/init.S
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 1f9a318cea14272edd10d63739e2d326c90f430e
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Fri Feb 23 16:28:46 2007 -0600
|
|
|
|
Only set ddrioovcr for 8548 rev1.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 9343dbf85bc03033f2102d8e8543567c2c1ad2d2
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Sat Feb 24 01:16:45 2007 -0600
|
|
|
|
Tweak DDR ECC error counter
|
|
|
|
Enable single-bit error counter when memory was cleared by ddr controller.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 85e7c7a45e3dd9c7ce3e722352ba60f8df1a7a4b
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Mon Feb 12 13:34:55 2007 -0600
|
|
|
|
85xx: write MAC address to mac-address and local-mac-address
|
|
|
|
Some device trees have a mac-address property, some have local-mac-address,
|
|
and some have both. To support all of these device trees, ftp_cpu_setup()
|
|
should write the MAC address to mac-address and local-mac-address, if they
|
|
exist.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 03b81b48eec0ad249ec97a4ae16c36fa2e014ff4
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Apr 23 01:44:44 2007 -0500
|
|
|
|
Some 85xx cpu cleanups
|
|
|
|
* Cleaned up the TSR[WIS] clearing
|
|
* Cleaned up DMA initialization
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 151d5d992eab8c497b24c816c73dc1ad8bffb4eb
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Mon Apr 23 01:32:22 2007 -0500
|
|
|
|
Add cpu support for the 8544
|
|
|
|
Recognize new SVR values, and add a few register definitions
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
Acked-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 25d83d7f4ac65727182d8ddaf7ba42fa74cf65ae
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Apr 11 16:51:02 2007 -0500
|
|
|
|
Add MPC8544DS basic port board files.
|
|
|
|
Add board port under new board/freescale directory
|
|
structure and reuse existing PIXIS FPGA support there.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 0cde4b00fc7393b89f379d83a9d436dcb1334bfa
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Apr 11 16:50:57 2007 -0500
|
|
|
|
Add MPC8544DS main configuration file.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 362dd83077ac04c0296bca3e824ec2fb3d44d9d6
|
|
Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
|
|
Date: Wed Dec 27 22:07:15 2006 +0300
|
|
|
|
Fix PCI I/O space mapping on Freescale MPC85x0ADS
|
|
|
|
The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit
|
|
52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's
|
|
describing the local address window used for the PCI I/O space accesses -- fix
|
|
this and carry over the necessary changes into the MPC8560ADS code since the
|
|
PCI I/O space mapping was also broken for this board (by the earlier commit
|
|
087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how
|
|
the PCI I/O space must be mapped to all the MPC85xx board config. headers.
|
|
|
|
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
|
|
|
|
board/mpc8540ads/init.S | 4 ++--
|
|
board/mpc8560ads/init.S | 4 ++--
|
|
include/configs/MPC8540ADS.h | 5 ++---
|
|
include/configs/MPC8541CDS.h | 2 +-
|
|
include/configs/MPC8548CDS.h | 2 +-
|
|
include/configs/MPC8560ADS.h | 8 ++++----
|
|
6 files changed, 12 insertions(+), 13 deletions(-)
|
|
|
|
commit 96629cbabdb727d4a5e62542deefc01d498db6dc
|
|
Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
|
|
Date: Tue Dec 5 16:42:30 2006 +0800
|
|
|
|
u-boot: Fix e500 v2 core reset bug
|
|
|
|
The following patch fixes the e500 v2 core reset bug.
|
|
For e500 v2 core, a new reset control register is added to reset the
|
|
processor.
|
|
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 63247a5acd58032e6cf33f525bc3923b467bac88
|
|
Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
|
|
Date: Wed Dec 20 11:01:00 2006 +0800
|
|
|
|
u-boot: v2: Remove the fixed TLB and LAW entrynubmer
|
|
|
|
Remove the fixed TLB and LAW entry nubmer. Use actually TLB and LAW
|
|
entry number to control the loop. This can reduce the potential risk
|
|
for the 85xx processor increasing its TLB adn LAW entry number.
|
|
|
|
Signed-off-by: Swarthout Edward <swarthout@freescale.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 0b1934ba12fd408fcc3b8bd9f4b04864c42a42bf
|
|
Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
|
|
Date: Mon Dec 18 17:01:04 2006 +0800
|
|
|
|
u-boot: Fix the 85xxcds tsec bug
|
|
|
|
Fix the 85xxcds tsec bug.
|
|
When enable PCI, tsec.o should be added to u-boot.lds to make tsec work.
|
|
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 7337b237ffc4aaf1b9467024fe472a880d852598
|
|
Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
|
|
Date: Fri Dec 15 14:43:31 2006 +0800
|
|
|
|
u-boot: Fix CPU2 errata on MPC8548CDS board
|
|
|
|
This patch apply workaround of CPU2 errata on MPC8548CDS board.
|
|
|
|
Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
|
|
|
|
commit 39b18c4f3e0b6d0dc00f4e68bad2da3766c85f09
|
|
Author: ebony.zhu@freescale.com <ebony.zhu@freescale.com>
|
|
Date: Mon Dec 18 16:25:15 2006 +0800
|
|
|
|
u-boot: Disables MPC8548CDS 2T_TIMING for DDR by default
|
|
|
|
This patch disables MPC8548CDS 2T_TIMING for DDR by default.
|
|
|
|
Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
|
|
|
|
commit 41fb7e0f1ec9b91bdae2565bab5f2e3ee15039c7
|
|
Author: Zang Roy-r61911 <tie-fei.zang@freescale.com>
|
|
Date: Thu Dec 14 14:14:55 2006 +0800
|
|
|
|
u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board
|
|
|
|
Enable PCI function and add PEX & rapidio memory map on MPC8548CDS
|
|
board.
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 96b8a05432f346f36493535c85320b70ec9c7c1b
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:54:15 2007 -0500
|
|
|
|
mpc83xx: Add MPC8313ERDB support.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit 49ea3b6eafe606285ae4d5c378026153dde53200
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:34:21 2007 -0500
|
|
|
|
mpc83xx: Add generic PCI setup code.
|
|
|
|
Board code can now request the generic setup code rather than having to
|
|
copy-and-paste it for themselves. Boards should be converted to use this
|
|
once they're tested with it.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit 7c98e5193e93df6b9b651851d54b638a61ebb0ea
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:34:19 2007 -0500
|
|
|
|
mpc83xx: Add 831x support to speed.c.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit 0f253283a32d91e06844d7f87f9b33f4f4fbce8f
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:34:18 2007 -0500
|
|
|
|
mpc83xx: Add 831x support to global_data.h
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit 95e7ef897e54591e615fc1b458b74c286fe1fb06
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:34:16 2007 -0500
|
|
|
|
mpc83xx: Change PVR_83xx to PVR_E300C1-3, and update checkcpu().
|
|
|
|
Rather than misleadingly define PVR_83xx as the specific type of 83xx
|
|
being built for, the PVR of each core revision is defined. checkcpu() now
|
|
prints the core that it detects, rather than aborting if it doesn't find
|
|
what it thinks it wants.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit a35b0c4950d84cf9e3a9e32b916135956d1ac636
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:34:15 2007 -0500
|
|
|
|
mpc83xx: Recognize SPR values for MPC8311 and MPC8313.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit d87c57b201b4572d16f1b642998faa00c9912b16
|
|
Author: Scott Wood <scottwood@freescale.com>
|
|
Date: Mon Apr 16 14:31:55 2007 -0500
|
|
|
|
mpc83xx: Add register definitions for MPC831x.
|
|
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
|
|
|
|
commit 7fc4c71a143be8666d70803fb25ae60379c95622
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Apr 23 15:39:59 2007 +0200
|
|
|
|
Fix file mode
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 38257988abfe74d459ca2ad748b109ca04e4efe1
|
|
Author: Sergei Shtylyov <sshtylyov@ru.mvista.com>
|
|
Date: Mon Apr 23 15:30:39 2007 +0200
|
|
|
|
[PATCH] Avoid assigning PCI resources from zero address
|
|
|
|
If a PCI IDE card happens to get a zero address assigned to it, the Linux IDE
|
|
core complains and IDE drivers fails to work. Also, assigning zero to a BAR
|
|
was illegal according to PCI 2.1 (the later revisions seem to have excluded the
|
|
sentence about "0" being considered an invalid address) -- so, use a reasonable
|
|
starting value of 0x1000 (that's what the most Linux archs are using).
|
|
|
|
Alternatively, one might have fixed the calls to pci_set_region() individually
|
|
(some code even seems to have taken care of this issue) but that would have
|
|
been a lot more work. :-)
|
|
|
|
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit afb903a2eb9436baa9270ccc0c27082d86497d89
|
|
Author: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Date: Mon Apr 23 14:00:11 2007 +0200
|
|
|
|
[patch] setenv(...) can delete environmentalvariables
|
|
|
|
update setenv() function so that entering a NULL value for the
|
|
variable's value will delete the environmental variable
|
|
|
|
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Acked-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 36f104e5caa747d568eff26b369565af57c2ffa6
|
|
Author: Mike Frysinger <vapier@gentoo.org>
|
|
Date: Mon Apr 23 13:54:24 2007 +0200
|
|
|
|
[patch] use unsigned char in smc91111 driver for mac
|
|
|
|
the v_mac variable in the smc91111 driver is declared as a signed char ...
|
|
this causes problems when one of the bytes in the MAC is "signed" like 0xE0
|
|
because when it gets printed out, you get a display like:
|
|
0xFFFFFFE0 and that's no good
|
|
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
commit d98c0885ad617fccf21e7c26ef8cb728fbfb2459
|
|
Author: Rodolfo Giometti <giometti@enneenne.com>
|
|
Date: Mon Apr 23 13:10:52 2007 +0200
|
|
|
|
USB: (Another) delay for crappy USB keys.
|
|
|
|
Some USB keys are slow in giving back an answer when the Root HUB
|
|
enables power lines.
|
|
|
|
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
|
|
|
|
commit 323bfa8f436dc3bc57187c9b1488bc3146ff1522
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Apr 23 12:00:22 2007 +0200
|
|
|
|
Remove BOARDLIBS usage completely
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 32556443840f127170e4baa8bdd5b567039f6c36
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sat Apr 21 21:07:22 2007 +0200
|
|
|
|
[PATCH] SystemACE support for Microblaze
|
|
|
|
commit 0643631aa1036cd746bf5d15f5a34bc7bc01ea4f
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sat Apr 21 21:02:40 2007 +0200
|
|
|
|
16bit read/write little endian
|
|
|
|
commit 9d1d6a34d26c5933bc097ce73c9348f95573cdd4
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sat Apr 21 20:53:31 2007 +0200
|
|
|
|
Change ML401 parameters - Xilinx BSP
|
|
|
|
commit 2e343b9a57f32e1bd08c35c9976910333fb4e13d
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Feb 28 05:37:29 2007 -0600
|
|
|
|
mpc8641hpcn: Fix LAW and TLB setup to use the IO_PHYS #defines.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
|
|
commit 79cb47391eebef85acadb3f6961ef6c55cace6ac
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Fri Jan 19 10:42:37 2007 +0800
|
|
|
|
Enable LAWs for MPC8641 PCI-Ex2.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit bd7851ce1e1f140665b520026abf1042968b1102
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Apr 20 14:12:26 2007 -0500
|
|
|
|
mpc86xx; Write MAC address to mac-address and local-mac-address
|
|
|
|
Some device trees have a mac-address property, some have local-mac-address,
|
|
and some have both. To support all of these device trees, ftp_cpu_setup()
|
|
should write the MAC address to mac-address and local-mac-address, if they
|
|
exist.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 7dbdf28b8bd855a8530dc3292e4982575a197060
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Apr 20 14:11:38 2007 -0500
|
|
|
|
mpc86xx: protect memcpy to bad address if a mac-address is missing from dt
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 14da5f7675bbb427c469e3f45006e027b6e21db9
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Fri Apr 20 17:43:28 2007 +0200
|
|
|
|
Cleanup compiler warnings, update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 6923565db12af34fd5e02d354ee65a8c78ac460f
|
|
Author: Detlev Zundel <dzu@denx.de>
|
|
Date: Fri Apr 20 12:01:47 2007 +0200
|
|
|
|
Fix breakage of NC650 board with respect to nand support.
|
|
|
|
Signed-off-by: Detlev Zundel <dzu@denx.de>
|
|
|
|
commit 39f23cd90947639ac278a18ff277ec786b5ac167
|
|
Author: Domen Puncer <domen.puncer@telargo.com>
|
|
Date: Fri Apr 20 11:13:16 2007 +0200
|
|
|
|
[RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculation
|
|
|
|
G2 core reference manual says decrementer and time base
|
|
are decreasing/increasing once every 4 bus clock cycles.
|
|
Lets fix it, so time in Linux won't run twice as fast
|
|
|
|
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
|
|
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 7651f8bdbba03bb0b4f241e2d2c4cb65b230bd56
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Thu Apr 19 23:14:39 2007 -0400
|
|
|
|
Fix serious pointer bug with bootm and reserve map.
|
|
|
|
What was suppose to be a stack variable was declared as a pointer,
|
|
overwriting random memory.
|
|
Also moved the libfdt.a requirement into the main Makefile. That is
|
|
The U-Boot Way.
|
|
|
|
commit d21686263574e95cb3e9e9b0496f968b1b897fdb
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Apr 19 09:53:52 2007 +0200
|
|
|
|
ppc4xx: Fix chip select timing for SysACE access on AMCC Katmai
|
|
|
|
Previous versions used full wait states for the chip select #1 which
|
|
is connected to the Xilinix SystemACE controller on the AMCC Katmai
|
|
evaluation board. This leads to really slow access and therefore low
|
|
performance. This patch now sets up the chip select a lot faster
|
|
resulting in much better read/write performance of the Linux driver.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 37837828d89084879bee2f2b8c7c68d4695940df
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 18 17:49:29 2007 +0200
|
|
|
|
Clenaup, update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit fd094c6379e2ef8a4d0ceb5640b24cb0c8d04449
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 18 17:20:58 2007 +0200
|
|
|
|
Update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 2a26ec4732efd7a308d0bbc97714c1d75ef1173b
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 18 17:07:26 2007 +0200
|
|
|
|
Cleanup, update CHANGELOG
|
|
|
|
Sigend-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 5f6c732affea9647762d27a4617a2ae64c52dceb
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 18 16:17:46 2007 +0200
|
|
|
|
Update CHANGELOG
|
|
|
|
commit ad4eb555671d97f96dc56eab55103b1f86874b01
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 18 14:30:39 2007 +0200
|
|
|
|
MCC200 board: remove warning which is obsolete after PSoC firmware changes
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 3747a3f010b2b1442dec3e871c69788b6017aaae
|
|
Author: Domen Puncer <domen.puncer@telargo.com>
|
|
Date: Wed Apr 18 12:11:05 2007 +0200
|
|
|
|
[PATCH] icecube/lite5200b: document wakeup from low-power support
|
|
|
|
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
|
|
|
|
commit e673226ff9d6aa91b47ceac74b8c13770b06bb37
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Apr 18 12:07:47 2007 +0200
|
|
|
|
ppc4xx: Update Acadia to not setup PLL when booting via bootstrap EEPROM
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Apr 18 12:05:59 2007 +0200
|
|
|
|
ppc4xx: Add output for bootrom location to 405EZ ports
|
|
|
|
Now 405EZ ports also show upon bootup from which boot device
|
|
they are configured to boot:
|
|
|
|
U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05)
|
|
|
|
CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz)
|
|
Bootstrap Option E - Boot ROM Location EBC (32 bits)
|
|
16 kB I-Cache 16 kB D-Cache
|
|
Board: Acadia - AMCC PPC405EZ Evaluation Board
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 9c00dfb0bf89c8c23e8af5b5bdf49cf66d769f85
|
|
Author: Peter Pearse <peter.pearse@arm.com>
|
|
Date: Tue Apr 17 13:30:33 2007 +0100
|
|
|
|
Move ppearse to ARM board list
|
|
Add Konstantin Kletschke for scb9328.
|
|
Signed-off-by: Peter Pearse <peter.pearse@arm.com>
|
|
|
|
commit d3832e8fe1b214ec62424eac36cfda9fc56d21b3
|
|
Author: Domen Puncer <domen.puncer@telargo.com>
|
|
Date: Mon Apr 16 14:00:13 2007 +0200
|
|
|
|
[PATCH] icecube/lite5200b: wakeup from low-power support
|
|
|
|
U-Boot part of Lite5200b low power mode support.
|
|
Puts SDRAM out of self-refresh and transfers control to
|
|
address saved at physical 0x0.
|
|
|
|
Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
|
|
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f35a53fc7b0c79fcfe7bdc01163c4b34aaba1460
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sun Apr 15 13:54:26 2007 -0400
|
|
|
|
Fix the ft_cpu_setup() property settings.
|
|
|
|
Use "setter" functions instead of flags, cleaner and more flexible.
|
|
It also fixes the problem noted by Timur Tabi that the ethernet MAC
|
|
addresses were all being set incorrectly to the same MAC address.
|
|
|
|
commit c28abb9c614f65ce2096cc4a66fc886c77d0e5a4
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Apr 14 22:51:24 2007 -0400
|
|
|
|
Improve the bootm command for CONFIG_OF_LIBFDT
|
|
|
|
In bootm, create the "/chosen" node only if it doesn't already exist
|
|
(better matches the previous behavior).
|
|
Update for proper reserved memory map handling for initrd.
|
|
|
|
commit 3f9f08cf91c8a6949a5d78a18bd3d8df7b86d888
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Apr 14 22:46:41 2007 -0400
|
|
|
|
Add some utilities to manipulate the reserved memory map.
|
|
|
|
commit 8048cdd56f04a756eeea4951f402bf5cc33785db
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat Apr 14 21:16:54 2007 +0200
|
|
|
|
Update CHANGELOG
|
|
|
|
commit 8e6875183cdca91c134408d119d4abcd48ef6856
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 18:56:46 2006 +0100
|
|
|
|
AVR32: Enable MMC support
|
|
|
|
Set up the portmux for the MMC interface and enable the MMC driver
|
|
along with support for DOS partitions, ext2 and FAT filesystems.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit fc26c97bb6df41b4a95662c34054fe912387bf38
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Fri Jan 20 10:03:53 2006 +0100
|
|
|
|
Atmel MCI driver
|
|
|
|
Driver for the Atmel MCI controller (MMC interface) for AT32AP CPUs.
|
|
|
|
The AT91 ARM-based CPUs use basically the same hardware, so it should
|
|
be possible to share this driver, but no effort has been made so far.
|
|
|
|
Hardware documentation can be found in the AT32AP7000 data sheet,
|
|
which can be downloaded from
|
|
|
|
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 05fdab1ef6a10d049a50021a86f1226f444d9b9f
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 18:55:37 2006 +0100
|
|
|
|
AVR32: Add clk and gpio infrastructure for mmci
|
|
|
|
Implement functions for configuring the mmci pins, as well as
|
|
functions for getting the clock rate of the mmci controller.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 7fac3f69e9f05c5e5326681976c35d129324c4de
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 18:53:56 2006 +0100
|
|
|
|
Enable partition support with MMC
|
|
|
|
Include implementations of init_part() and get_partition_info() when
|
|
CONFIG_MMC is set.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 9a24f477a1ed5bb0f74377c985d754ebbfa44872
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 17:14:30 2006 +0100
|
|
|
|
AVR32: Enable networking
|
|
|
|
Implement MACB initialization for AVR32 and ATSTK1000, and turn
|
|
everything on, including the MACB driver.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 5c1fe1ffffd1750a7e47e5a2e2cd600c00e4f009
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Fri Jan 20 10:03:34 2006 +0100
|
|
|
|
Atmel MACB ethernet driver
|
|
|
|
Driver for the Atmel MACB on-chip ethernet controller.
|
|
|
|
This driver has been tested on the ATSTK1000 board with a AT32AP7000
|
|
CPU. It should probably work on AT91SAM926x as well with some minor
|
|
modifications.
|
|
|
|
Hardware documentation can be found in the AT32AP7000 data sheet,
|
|
which can be downloaded from
|
|
|
|
http://www.atmel.com/dyn/products/datasheets.asp?family_id=682
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit b4ec9c2d43d894729bb633bfdbdfa95a962c1556
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 16:56:14 2006 +0100
|
|
|
|
AVR32: Add clk and gpio infrastructure for macb0 and macb1
|
|
|
|
Implement functions for configuring the macb0 and macb1 pins, as
|
|
well as functions for getting the clock rate of the various
|
|
busses the macb ethernet controllers are connected to.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit d5acb95b16a0a74c643524342c3437e765426d05
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 15:39:15 2006 +0100
|
|
|
|
AVR32: Implement simple DMA memory allocator
|
|
|
|
Implement dma_alloc_coherent() which returns cache-aligned
|
|
uncacheable memory.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 91975b0fea773c9e681fea8cf3349669f27685ee
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 15:46:02 2006 +0100
|
|
|
|
Import <linux/mii.h> from the Linux kernel
|
|
|
|
Instead of creating yet another set of MII register definitions
|
|
in the macb driver, here's a complete set of definitions for everyone
|
|
to use.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 1b804b229556a4d862da93c0ec94e79419364b2c
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed Mar 21 19:47:36 2007 +0100
|
|
|
|
AVR32: Include more commands for ATSTK1000
|
|
|
|
Include the imi, imls and jffs commands sets by default on ATSTK1000.
|
|
Also define CONFIG_BOOTARGS to something more useful, define
|
|
CONFIG_BOOTCOMMAND and enable autoboot by default.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 9c0deb5ae3ea0189f2e08ac29ef1316f1fb8548d
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed Mar 21 19:44:48 2007 +0100
|
|
|
|
AVR32: Provide a definition of struct stat
|
|
|
|
Copy the definition of struct stat from the Linux kernel.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 12f099c08167a7a51aeee623bc16dafd0841271c
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Dec 17 14:46:06 2006 +0100
|
|
|
|
AVR32: Use initdram() instead of board_init_memories()
|
|
|
|
Conform to the "standard" interface and use initdram() instead of
|
|
board_init_memories() on AVR32. This enables us to get rid of the
|
|
sdram_size member of the global_data struct as well.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 1f4f2121c2685182eb87fa9a9b799d1917387a1c
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Mon Nov 20 15:53:10 2006 +0100
|
|
|
|
AVR32: Relocate u-boot to SDRAM
|
|
|
|
Relocate the u-boot image into SDRAM like everyone else does. This
|
|
means that we can handle much larger .data and .bss than we used to.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit df548d3c3e2bbc40258713167859ffc2ce99a900
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sun Nov 19 18:06:53 2006 +0100
|
|
|
|
AVR32: Resource management rewrite
|
|
|
|
Rewrite the resource management code (i.e. I/O memory, clock gating,
|
|
gpio) so it doesn't depend on any global state. This is necessary
|
|
because this code is heavily used before relocation to RAM, so we
|
|
can't write to any global variables.
|
|
|
|
As an added bonus, this makes u-boot's memory footprint a bit smaller,
|
|
although some functionality has been left out; all clocks are enabled
|
|
all the time, and there's no checking for gpio line conflicts.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 03d1e1365796cd15d1726e8a51fd8b5be50b2fe9
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sat Nov 18 18:01:13 2006 +0100
|
|
|
|
AVR32: Clean up memory-map.h for at32ap7000
|
|
|
|
Convert spaces to tabs (must have missed this one last time around),
|
|
sort the entries by address and group them together by bus
|
|
connectivity.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 28c699ef69f4b6cdf252e4747b7b590028a88981
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sat Nov 18 17:32:31 2006 +0100
|
|
|
|
AVR32: Build position-independent u-boot
|
|
|
|
Add -fPIC -mno-init-got to the avr32-specific CFLAGS to make u-boot
|
|
position independent. This will make relocation a lot easier.
|
|
|
|
-mno-init-got means that gcc shouldn't emit code to load the GOT
|
|
address into r6 in every function prologue. We do it once and for
|
|
all in the early startup assembly code, so enabling this option
|
|
makes u-boot a bit faster and smaller.
|
|
|
|
The assembly parts have always been position-independent, so no code
|
|
changes should be necessary.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 5374b36de91d006d1df9536259fa9f66b01aa3aa
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sat Nov 18 17:24:31 2006 +0100
|
|
|
|
AVR32: Use avr32-linux- cross-compilation prefix by default
|
|
|
|
It doesn't really matter which toolchain you use to compile u-boot,
|
|
but the avr32-linux one is probably what most people have installed.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit c841beeddebece0039e724fb27f4d1a39ee1c6b6
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Sat Nov 18 17:15:30 2006 +0100
|
|
|
|
AVR32: Split start_u_boot into board_init_f and board_init_r
|
|
|
|
Split the avr32 initialization code into a function to run before
|
|
relocation, board_init_f and a function to run after relocation,
|
|
board_init_r. For now, board_init_f simply calls board_init_r
|
|
at the end.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 37403005cfe6bb13964d450f6a48a0b0f2f7017e
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Sat Apr 14 05:26:48 2007 +0200
|
|
|
|
[Fix] Set the LED status register on the UC101 for the LXT971 PHY.
|
|
clear the Display after reset.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 7882751c78b7ecabfd49b0eff8de27661c71f16c
|
|
Author: Denis Peter <d.peter@mpl.ch>
|
|
Date: Fri Apr 13 09:13:33 2007 +0200
|
|
|
|
[PATCH] Fix bugs in cmd_ide.c and cmd_scsi.c
|
|
|
|
Fix bug introduced by "Fix get_partition_info() parameter error in all
|
|
other calls" from 2005-03-04 in cmd_ide.c and cmd_scsi.c, which prevented
|
|
to use diskboot or scsiboot form another device than 0.
|
|
|
|
Signed-off-by: Denis Peter <d.peter@mpl.ch>
|
|
|
|
commit 0b94504d22e70f537c17a0d38c87edb6e370977d
|
|
Author: Greg Lopp <lopp@pobox.com>
|
|
Date: Fri Apr 13 08:02:24 2007 +0200
|
|
|
|
[PATCH] Fix use of "void *" for block dev read/write buffer pointers
|
|
|
|
Signed-of-by: Greg Lopp <lopp@pobox.com>
|
|
Acked-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 6fbf261f8df294e589cfadebebe5468e3c0f29e9
|
|
Author: Xie Xiaobo <r63061@freescale.com>
|
|
Date: Fri Mar 9 19:08:25 2007 +0800
|
|
|
|
Fix two bugs for MPC83xx DDR2 controller SPD Init
|
|
|
|
There are a few bugs in the cpu/mpc83xx/spd_sdram.c
|
|
the first bug is that the picos_to_clk routine introduces a huge
|
|
rounding error in 83xx.
|
|
the second bug is that the mode register write recovery field is
|
|
tWR-1, not tWR >> 1.
|
|
|
|
commit 2ad3aba01d37b72e7c957b07e102fccd64fe6d13
|
|
Author: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Date: Thu Apr 12 14:15:59 2007 +0200
|
|
|
|
ppc4xx: Fix i2c divisor calcularion for PPC4xx
|
|
|
|
This patch fixes changes the i2c_init(...) function to use the function
|
|
get_OPB_freq() rather than calculating the OPB speed by
|
|
sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is
|
|
specific per processor. The prior method was not and so was calculating
|
|
the wrong speed for some PPC4xx processors.
|
|
|
|
Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6c9ba919375db977aaad9146bf320c7afd07ae7a
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 11 17:25:01 2007 +0200
|
|
|
|
Update CHANGELOG
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 51056dd9863e6a1bc363afbbe1775c58cd967418
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 11 17:22:55 2007 +0200
|
|
|
|
Update for SC3 board
|
|
|
|
* Make IDE timeout configurable through ide_reset_timeout variable.
|
|
* Use Newline as "password" string
|
|
* Use just a single partition in NAND flash
|
|
|
|
commit 3d98b85800c80dc68227c8f10bf5c93456d6d054
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Mon Jan 22 12:37:30 2007 -0600
|
|
|
|
Add PIXIS FPGA support for MPC8641HPCN board.
|
|
|
|
Move the 8641HPCN's PIXIS code to the new directory
|
|
board/freescale/common/ as it will be shared by
|
|
future boards not in the same processor family.
|
|
|
|
Write a "pixis_reset" command that utilizes the FPGA
|
|
reset sequencer to support alternate soft-reset options
|
|
such as using the "alternate" flash bank, enabling
|
|
the watch dog, or choosing different CPU frequencies.
|
|
|
|
Add documentation for the pixis_reset to README.mpc8641hpcn.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 64dbbd40c58349b64f43fd33dbb5ca0adb67d642
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Fri Apr 6 14:19:43 2007 -0400
|
|
|
|
Moved fdt command support code to fdt_support.c
|
|
|
|
...in preparation for improving the bootm command's handling of fdt blobs.
|
|
Also cleaned up some coding sloppiness.
|
|
|
|
commit 6679f9299534e488a171a9bb8f9bb891de247aab
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Fri Apr 6 14:17:14 2007 -0400
|
|
|
|
libfdt: Make fdt_check_header() public
|
|
|
|
Changed _fdt_check_header() to fdt_check_header() and made it part of
|
|
the interface - it is a useful routine.
|
|
|
|
Also did some asthetics cleanup to the include files (headers).
|
|
|
|
commit c0707ce65677650b5ceab0500ee50ae5168afef2
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:34:06 2007 +0800
|
|
|
|
[Blackfin][PATCH] Kill off a bunch of common local prototypes
|
|
|
|
commit 7b7e30aa64bb6657a1bfd32fdbdbfeb561e6a48d
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:33:04 2007 +0800
|
|
|
|
[Blackfin][PATCH] Fix dynamic CPLB generation issue
|
|
|
|
commit 0445e3a264251d75b1be45ef713c70726a2952f0
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:31:47 2007 +0800
|
|
|
|
[Blackfin][PATCH] minior cleanup
|
|
|
|
commit 155fd766573981090e638b493d5857562151862e
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:31:18 2007 +0800
|
|
|
|
[Blackfin][PATCH] Fix copyright and update license
|
|
|
|
commit 9fd437bbd75d282f899e1da50be20a2bf38450bc
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:30:25 2007 +0800
|
|
|
|
[Blackfin][PATCH] Add BF537 EMAC driver initialization
|
|
|
|
commit 889256e8604e0c68db1d866d720894dffede9df6
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:29:55 2007 +0800
|
|
|
|
[Blackfin][PATCH] call real the system synchronize instruction
|
|
|
|
commit e0df1c921b788289564e4c1ee7120a6a9cd3ab05
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:29:17 2007 +0800
|
|
|
|
[Blackfin][PATCH] remove asm/page.h as we do not actually use/want any of these definitions nor does any other arch include it
|
|
|
|
commit dfeeab2cd680df047e68e723b246adf6f33bb556
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Thu Apr 5 18:28:34 2007 +0800
|
|
|
|
[Blackfin][PATCH]: fix flash unaligned copy issue
|
|
|
|
commit 443feb740584e406efa203af909fe2926608e8d5
|
|
Author: Igor Marnat <marny@rambler.ru>
|
|
Date: Wed Mar 21 09:55:01 2007 +0300
|
|
|
|
Update usage of 'nc' in README.NetConsole
|
|
|
|
Added information about usage of NetConsole on systems where the -l and -p
|
|
switches are mutually exclusive.
|
|
|
|
Signed-off-by: Igor Marnat <marny@rambler.ru>
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit 31c98a88228021b314c89ebb8104fb6473da4471
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 4 02:09:30 2007 +0200
|
|
|
|
Minor coding style cleanup.
|
|
|
|
commit 94abd7c0583ebe01e799b25f451201deeaab550d
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Apr 4 01:49:15 2007 +0200
|
|
|
|
Minor cleanup.
|
|
|
|
commit 822af351ad2babc7d99033361a5fcacd30f6bc78
|
|
Author: Rodolfo Giometti <giometti@enneenne.com>
|
|
Date: Tue Apr 3 14:27:18 2007 +0200
|
|
|
|
Support for the Philips ISP116x HCD (Host Controller Driver)
|
|
|
|
Signed-off-by: Rodolfo Giometti <giometti@enneenne.com>
|
|
|
|
commit edf5851be6c17c031d4f71dd5b0a12040b7c50c8
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Apr 3 14:27:08 2007 +0200
|
|
|
|
USB: cleanup monahans usb support. Remove dead code.
|
|
|
|
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
|
|
|
|
commit a65c5768e5537530bd1780af3d3fddc3113a163c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Apr 2 10:09:30 2007 +0200
|
|
|
|
ppc4xx: Change SysACE address on Katmai
|
|
|
|
With this new base address of the Xilinx SystemACE controller
|
|
the Linux driver will be easier to adapt, since it can now be
|
|
mapped via the "normal" ioremap() call.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit aea03c4e8c3a21ce43d3faf48a6e6d474c8bdf73
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 14:30:53 2007 -0400
|
|
|
|
Fix some minor whitespace violations.
|
|
|
|
commit 213bf8c822de8eecaf69860684469cdaba2e9e6a
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 12:23:51 2007 -0400
|
|
|
|
Add a flattened device tree (fdt) command (2 of 2)
|
|
|
|
Modifications to the existing code to support the new fdt command.
|
|
|
|
commit 781e09ee6e3e3e392ab362c1f0ef1068adc76e3e
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 12:22:10 2007 -0400
|
|
|
|
Add a flattened device tree (fdt) command (1 of 2)
|
|
|
|
The fdt command uses David Gibson's libfdt library to manipulate as well
|
|
as print the flattened device tree. This patch is the new command,
|
|
the second part is the modifications to the existing code.
|
|
|
|
commit 3af0d587d93e0be5f96e1b30fa41e662f8b0803e
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 12:13:43 2007 -0400
|
|
|
|
libfdt: Enhanced and published fdt_next_tag()
|
|
|
|
Enhanced the formerly private function _fdt_next_tag() to allow stepping
|
|
through the tree, used to produce a human-readable dump, and made
|
|
it part of the published interface.
|
|
Also added some comments.
|
|
|
|
commit fa3a74cec73dfd06a5ae35a9a3368200273aaa71
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 12:05:39 2007 -0400
|
|
|
|
libfdt: Customizations for use by u-boot.
|
|
|
|
Changes to David Gibson's original source to fit into u-boot's
|
|
environment. No functionality changes.
|
|
|
|
commit 35748177c64a4a83a00057e93bb33e40278a2a96
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 12:00:56 2007 -0400
|
|
|
|
libfdt: Import libfdt source (2 of 2)
|
|
|
|
This adds the applicable libfdt source files (unmodified) and a README
|
|
to explain where the source came from.
|
|
|
|
commit 7cd5da0fe877e7171a4cdd44880bce783132871a
|
|
Author: Gerald Van Baren <vanbaren@cideas.com>
|
|
Date: Sat Mar 31 11:59:59 2007 -0400
|
|
|
|
libfdt: Import libfdt source (1 of 2)
|
|
|
|
This adds the applicable libfdt source files (unmodified) and a README
|
|
to explain where the source came from.
|
|
|
|
commit da6ebc1bc082cbe3b6bbde079cafe09f7ebbad4b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 31 13:16:23 2007 +0200
|
|
|
|
ppc4xx: Update Katmai bootstrap command
|
|
|
|
Now the DDR2 frequency is also 2*PLB frequency when 166MHz PLB
|
|
is selected.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cabee756a6532986729477c3cc1ea16ef8517ad2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 31 13:15:06 2007 +0200
|
|
|
|
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
|
|
|
|
Additional RAM information is now printed upon powerup, like
|
|
DDR2 frequency and CAS latency.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 60723803431ac75cad085690789e433d5ab9174e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 31 08:48:36 2007 +0200
|
|
|
|
ppc4xx: Change Yucca config file to support ECC
|
|
|
|
With the updated 44x DDR2 driver the Yucca board now supports
|
|
ECC generation and checking.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 490e5730c674b20d708b783a2c5ffd7208f83873
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 31 08:47:34 2007 +0200
|
|
|
|
ppc4xx: Fix "bootstrap" command for Katmai board
|
|
|
|
The board specific "bootstrap" command is now fixed and can
|
|
be used for the AMCC Katmai board to configure different
|
|
CPU/PLB/OPB frequencies.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 94f54703c3a776ec23e427ca2a16e0a79a5d50c1
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 31 08:46:08 2007 +0200
|
|
|
|
ppc4xx: Update 44x_spd_ddr2 code (440SP/440SPe)
|
|
|
|
Fix a bug in the auto calibration routine. This driver now runs
|
|
more reliable with the tested modules. It's also tested with
|
|
167MHz PLB frequency (667MHz DDR2 frequency) on the Katmai.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 342cd097be1e7affe82f42ab3da220959a699e64
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Fri Mar 30 22:52:09 2007 +0200
|
|
|
|
[PATCH] Clean include dependence
|
|
|
|
commit 6f934210fb293fde2cfb4251c6d96fdc58b6a906
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Fri Mar 30 22:42:45 2007 +0200
|
|
|
|
[CLEAN] Remove inefficient Suzaku code
|
|
|
|
commit 430f1b0f9a670c2f13eaa52e66a10db96dd3647d
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 28 15:03:16 2007 +0200
|
|
|
|
Merge some AMCC make targets to keep the top-level Makefile smaller
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 0c75c9d84307a9f1cbe1ff0c4d8937ee3a96475e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 28 14:52:12 2007 +0200
|
|
|
|
i2c: Enable "old" i2c commands even when CONFIG_I2C_CMD_TREE is defined
|
|
|
|
The "old" i2c commands (iprobe, imd...) are now compiled in again,
|
|
even when the i2c command tree is enabled via the CONFIG_I2C_CMD_TREE
|
|
config option.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 5da048adf44bea5e3b94080d02903c2e3fe7aa4a
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Tue Mar 27 00:32:16 2007 +0200
|
|
|
|
PATCH: Resolve GPL license problem
|
|
|
|
commit ae00bb4b2944dc64a485ed72a19754b11af7c223
|
|
Author: Rodolfo Giometti <giometti@enneenne.com>
|
|
Date: Mon Mar 26 12:03:36 2007 +0200
|
|
|
|
PXA: pxa27x USB OHCI support
|
|
|
|
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
|
|
|
|
commit ae79f60677c208326535647dcbd5c3ec40dbcb0b
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon Mar 26 11:21:05 2007 +0200
|
|
|
|
USB: remove the S3C24X0_merge #define, which was introduced while
|
|
merging OHCI drivers.
|
|
|
|
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
|
|
|
|
commit 1798049522f594013aea29457d46794298c6ae15
|
|
Author: Michal Simek <root@monstr.eu>
|
|
Date: Mon Mar 26 01:39:07 2007 +0200
|
|
|
|
Support for XUPV2P board
|
|
Reset support
|
|
BSP autoconfig support
|
|
|
|
commit 0d974d5297349504a2ddfa09314be573b5df320a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 24 15:57:09 2007 +0100
|
|
|
|
[PATCH] Add 4xx GPIO functions
|
|
|
|
This patch adds some 4xx GPIO functions. It also moves some of the
|
|
common code and defines into a common 4xx GPIO header file.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2db633658bbf366ab0c8dad7a0727e1fb2ae6b11
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 24 15:55:58 2007 +0100
|
|
|
|
[PATCH] Small Sequoia cleanup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 3cb86f3e40d2a80356177434a99f75bc8baa9caf
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Mar 24 15:45:34 2007 +0100
|
|
|
|
[PATCH] Clean up 40EZ/Acadia support
|
|
|
|
This patch cleans up all the open issue of the preliminary
|
|
Acadia support.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6eb1df835191d8ce4b81d5af40fa8e0fbe78e997
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Dec 12 11:02:20 2006 -0600
|
|
|
|
Fix 8641HPCN problem with ld version 2.16
|
|
|
|
(Dot outside sections problem).
|
|
|
|
This fix is in the spirit of 807d5d7319330e336ab34a5623c5e0d73b87d540.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 9964a4dd0d4ef5a037febaebf1aa494b1a72991c
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Thu Dec 7 10:35:55 2006 -0600
|
|
|
|
Set Rev 2.x 86xx PIC in mixed mode.
|
|
|
|
Prevent false interrupt from hanging Linux as MSR[EE] is set
|
|
to enable interrupts by changing the PIC out of the default
|
|
pass through mode into mixed mode.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 5a58a73ceb0a4059c42ef64cedbc1a45e0aaa00e
|
|
Author: Jason Jin <jason.jin@freescale.com>
|
|
Date: Thu Dec 7 10:32:35 2006 -0600
|
|
|
|
Add flash cmd function to 8641HPCN ramboot
|
|
|
|
Also fixes some commmand for 8641 HPCN ramboot case.
|
|
|
|
Signed-off-by: Jason Jin <jason.jin@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2ccceacc04b009d923afb7c26189ba2f8a2a5d46
|
|
Author: Ed Swarthout <ed.swarthout@freescale.com>
|
|
Date: Thu Dec 7 10:34:14 2006 -0600
|
|
|
|
Add support for 8641 Rev 2 silicon.
|
|
|
|
Without this patch, I am unable to get to the prompt on rev 2 silicon.
|
|
Only set ddrioovcr for rev1.
|
|
|
|
Signed-off-by: Ed Swarthout<ed.swarthout@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 44ba464b99001f8bd1c456a1e9d59726252f707a
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Thu Mar 22 00:13:12 2007 +0100
|
|
|
|
Code cleanup / re-insert previous Copyright entries.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 2a8dfe08359a1b663418b2faa1da1d7bce34d302
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Mar 21 23:26:15 2007 +0100
|
|
|
|
Code cleanup. Update CHANGELOG
|
|
|
|
commit e6615ecf4eaf4dd52696934aed8f5c6474cfd286
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 21 14:54:29 2007 +0100
|
|
|
|
ppc4xx: Fix file mode of include/configs/acadia.h
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d5f4614c9350d9333e575100fb250aab774d0258
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Wed Mar 21 14:41:46 2007 +0100
|
|
|
|
SPC1920: fix small clock routing bug
|
|
|
|
Signed-off-by: Markus Klotzbuecher <mk@denx.de>
|
|
|
|
commit 16c0cc1c82081a493ab87c51980b28336ce1bce8
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 21 13:39:57 2007 +0100
|
|
|
|
[PATCH] Add AMCC Acadia (405EZ) eval board support
|
|
|
|
This patch adds support for the new AMCC Acadia eval board.
|
|
|
|
Please note that this Acadia/405EZ support is still in a beta stage.
|
|
Still lot's of cleanup needed but we need a preliminary release now.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e01bd218b00af73499331a1a701625a852cd286f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 21 13:38:59 2007 +0100
|
|
|
|
[PATCH] Add AMCC PPC405EZ support
|
|
|
|
This patch adds support for the new AMCC 405EZ PPC. It is in
|
|
preparation for the AMCC Acadia board support.
|
|
|
|
Please note that this Acadia/405EZ support is still in a beta stage.
|
|
Still lot's of cleanup needed but we need a preliminary release now.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 07e82cb2e284a893df6693f2a1337ab2c47bf6a1
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Wed Mar 21 08:45:17 2007 +0100
|
|
|
|
[PATCH] TQM8272: dont change the bits given from the HRCW
|
|
for the SIUMCR and BCR Register.
|
|
Fix the calculation for the EEprom Size
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 654589873dbafcf104dff133ce0d03a4506e9cc3
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Tue Mar 20 18:16:24 2007 +0800
|
|
|
|
[Blackfin][PATCH] Add BF561 EZKIT board support
|
|
|
|
commit a6154fd1cfd020f6da8527e0365b1020a11a71d0
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Mon Mar 19 22:55:58 2007 +0800
|
|
|
|
[Blackfin][PATCH] minor cleanup
|
|
|
|
commit 389b6bb50f745bf5038ce030300d8a8512e96f79
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Mon Mar 19 13:10:08 2007 +0100
|
|
|
|
Remove obsoleted POST files.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 8e709bbb2636b5670a8f2b575e138eb1f55773f6
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Mon Mar 19 01:26:11 2007 +0800
|
|
|
|
[PATCH] Add flash chip M29W320ET/B support
|
|
|
|
commit 26bf7deca364a5b33f39e8f14ddd3f4081345015
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Mon Mar 19 01:24:52 2007 +0800
|
|
|
|
[Blackfin][PATCH] Add BF537 stamp board support
|
|
|
|
commit 8423e5e31a7235d05a482627315fb11d49c17bd7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Mar 16 21:11:42 2007 +0100
|
|
|
|
[PATCH] Use dynamic SDRAM TLB setup on AMCC Ebony eval board
|
|
|
|
Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
|
|
DDR memory are dynamically programmed matching the total size
|
|
of the equipped memory (DIMM modules).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 76d1466f918b881cda2d259254761e73885093c2
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Tue Mar 13 13:38:05 2007 +0100
|
|
|
|
[PATCH] renamed environment variable 'addcon' to 'addcons' for PCI405
|
|
boards in terms of unification.
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit a7090b993d3d4d2221ac3f33e6cb1d1b2ccc6bf0
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Mar 13 16:05:55 2007 +0100
|
|
|
|
Make SC3 board build with 'make O='; use 'addcons' consistently
|
|
(SC3 and Jupiter used to use 'addcon' instead).
|
|
|
|
Signed-off-by: Wolfgang Denk wd@denx.de
|
|
|
|
commit 8502e30a28e492c756ea2d7df0ace026388fce4b
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Tue Mar 13 09:40:59 2007 +0100
|
|
|
|
[PATCH] update board config for jupiter Board:
|
|
added Hush Shell,
|
|
CONFIG_CMDLINE_EDITING,
|
|
CFG_ENV_ADDR_REDUND activated
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 0d93de11449390a5984b0236c3612e50f6dbb7e8
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Mon Mar 12 12:11:55 2007 +0800
|
|
|
|
[Blackfin][PATCH] minor cleanup
|
|
|
|
commit bfa5754a58477ac917d21527cd0f079d87cf188e
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Mon Mar 12 01:42:06 2007 +0800
|
|
|
|
[Blackfin][PATCH] Fix BUILD_DIR option of MAKEALL building issue
|
|
|
|
commit 8440bb14581a294375c34b91b42512f9753d1130
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Mon Mar 12 00:25:14 2007 +0800
|
|
|
|
[Blackfin][PATCH] code cleanup
|
|
|
|
commit cfc67116a706fd18b8f6a9c11a16753c5626d689
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sun Mar 11 13:48:24 2007 +0100
|
|
|
|
[Microblaze][PATCH] part 2
|
|
timer support
|
|
interrupt controller support
|
|
flash support
|
|
ethernet support
|
|
cache support
|
|
board information support
|
|
env support
|
|
booting image support
|
|
|
|
adding support for Xilinx ML401
|
|
|
|
commit 76316a318de91f6184e7c22a10e02d275ade2441
|
|
Author: Michal Simek <monstr@monstr.eu>
|
|
Date: Sun Mar 11 13:42:58 2007 +0100
|
|
|
|
[Microblaze][PATCH]
|
|
timer support
|
|
interrupt controller support
|
|
flash support
|
|
ethernet support
|
|
cache support
|
|
board information support
|
|
env support
|
|
booting image support
|
|
|
|
adding support for Xilinx ML401
|
|
|
|
commit 8db13d63157811c839d15a313d9f2d2f5fd10af3
|
|
Author: Aubrey Li <aubrey.adi@gmail.com>
|
|
Date: Sat Mar 10 23:49:29 2007 +0800
|
|
|
|
[Blackfin][PATCH] code cleanup
|
|
|
|
commit ef26a08fef928b7bc11ae2c109e638dc3a016d91
|
|
Author: Aubrey.Li <aubrey.adi@gmail.com>
|
|
Date: Fri Mar 9 13:40:56 2007 +0800
|
|
|
|
[Blackfin][PATCH-2/2] Common files changed to support bf533 platform
|
|
|
|
commit 3f0606ad0b5639f7f22848fe5b4574e754d0470f
|
|
Author: Aubrey.Li <aubrey.adi@gmail.com>
|
|
Date: Fri Mar 9 13:38:44 2007 +0800
|
|
|
|
[Blackfin]PATCH-1/2]: Remove obsolete blackfin port and add bf533 platform support
|
|
|
|
commit 992423ab43c2bcf6b704853bd00af77450915e20
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 8 23:00:08 2007 +0100
|
|
|
|
ppc4xx: Fix file mode of sequoia.c
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit eb92f613556800f7483666db09d9a237ad911d4a
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Mar 8 22:52:51 2007 +0100
|
|
|
|
Minor cleanup.
|
|
|
|
commit 8ce16f55c7b9752af3d8bed84521aec5337e2de1
|
|
Author: John Otken john@softadvances.com <john@softadvances.com>
|
|
Date: Thu Mar 8 09:39:48 2007 -0600
|
|
|
|
ppc4xx: Clear Sequoia/Rainier security engine reset bits
|
|
|
|
Signed-off-by: John Otken john@softadvances.com <john@softadvances.com>
|
|
|
|
commit 650a330dd2539130c8c324791e2f9f75aed79d4e
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Thu Mar 8 16:26:52 2007 +0100
|
|
|
|
[PATCH] I2C: add some more SPD eeprom decoding for DDR2 modules
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit d9fc703246840c4b268debf48c334ba55c597dc0
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Thu Mar 8 16:25:47 2007 +0100
|
|
|
|
[PATCH] I2C: disable flat i2c commands when CONFIG_I2C_CMD_TREE is defined
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit ced5b9029043397348cdc88e0cfcd6b1f629250b
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Thu Mar 8 16:23:11 2007 +0100
|
|
|
|
[PATCH] 4xx: allow CONFIG_I2C_CMD_TREE without CONFIG_I2C_MULTI_BUS
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit d8a8ea5c476d37006fc7f85b7f903142795c8b14
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Thu Mar 8 16:20:32 2007 +0100
|
|
|
|
[PATCH] I2C: Add missing default CFG_SPD_BUS_NUM
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit f9fc6a5852a6335840882fa2111925010eea1abe
|
|
Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
Date: Wed Mar 7 15:32:01 2007 +0100
|
|
|
|
fixed ethernet phy configuration for plu405 board
|
|
|
|
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
|
|
|
|
commit 769104c9356594deb2092e204a39c05b33202d6c
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Mar 8 21:49:27 2007 +0100
|
|
|
|
Minor cleanup
|
|
|
|
commit 00cdb4ce5e1b42248e7e6522ad0da3421b988afa
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 8 10:13:16 2007 +0100
|
|
|
|
[PATCH] Update AMCC Luan 440SP eval board support
|
|
|
|
The AMCC Luan now uses the common 440SP(e) DDR SPD code for DDR
|
|
inititializition. This includes DDR auto calibration and support
|
|
for different DIMM modules, instead of the fixed setup used in
|
|
the earlier version.
|
|
|
|
This patch also enables the cache in FLASH for the startup
|
|
phase of U-Boot (while running from FLASH). After relocating to
|
|
SDRAM the cache is disabled again. This will speed up the boot
|
|
process, especially the SDRAM setup, since there are some loops
|
|
for memory testing (auto calibration).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2f5df47351910a2936c7741cf111855829200943
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 8 10:10:18 2007 +0100
|
|
|
|
[PATCH] Update AMCC Yucca 440SPe eval board support
|
|
|
|
The AMCC Yucca now uses the common 440SP(e) DDR SPD code for DDR
|
|
inititializition. This includes DDR auto calibration and support
|
|
for different DIMM modules, instead of the fixed setup used in
|
|
the earlier version.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2721a68a9ea91f1e494649ce68b2577261f578e2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 8 10:07:18 2007 +0100
|
|
|
|
ppc4xx: Small AMCC Katmai 440SPe update
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit df294497479b1dca6dd86318b2a912f72fede0df
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 8 10:06:09 2007 +0100
|
|
|
|
ppc4xx: Update 440SP/440SPe DDR SPD setup code to support 440SP
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 83853178bd36bca6f0f8f1331476620c84a587fc
|
|
Author: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Date: Wed Mar 7 12:14:50 2007 -0600
|
|
|
|
net - Support ping reply when processing net-loop
|
|
|
|
Add ICMP_ECHO_REQUEST packet support by responding with a ICMP_ECHO_REPLY.
|
|
|
|
This permits the ping command to test the phy interface when the phy
|
|
is put in loopback mode (typically by setting register 0 bit 14).
|
|
|
|
It also allows the port to respond to an external ping when u-boot is
|
|
processing some other net command (such as tftp). This is useful when
|
|
tftp appears to hang.
|
|
|
|
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit fa1aef15bcd47736687be1af544506e90fba545d
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 7 16:43:00 2007 +0100
|
|
|
|
[PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board
|
|
|
|
Define CONFIG_PROG_SDRAM_TLB so that the TLB entries for the
|
|
DDR memory are dynamically programmed matching the total size
|
|
of the equipped memory (DIMM modules).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e2ebe696818939e2b974628be9c921ea3fe9de13
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Mar 7 16:39:36 2007 +0100
|
|
|
|
[PATCH] Fix AMCC 44x SPD SDRAM init code to support 2 DIMM's
|
|
|
|
This patch fixes a problem that occurs when 2 DIMM's are
|
|
used. This problem was first spotted and fixed by Gerald Jackson
|
|
<gerald.jackson@reaonixsecurity.com> but this patch fixes the
|
|
problem in a little more clever way.
|
|
|
|
This patch also adds the nice functionality to dynamically
|
|
create the TLB entries for the SDRAM (tlb.c). So we should
|
|
never run into such problems with wrong (too short) TLB
|
|
initialization again on these platforms.
|
|
|
|
As this feature is new to the "old" 44x SPD DDR driver, it
|
|
has to be enabled via the CONFIG_PROG_SDRAM_TLB define.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 39218433983417b9df087976a79e3f80dd5e83d6
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Wed Mar 7 16:33:44 2007 +0100
|
|
|
|
UC101: fix compiler warnings
|
|
|
|
commit 8d7e2732221bc2d64df14f700c64c23e0a4c3dce
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Mar 7 16:19:46 2007 +0100
|
|
|
|
HMI1001: fix build error, cleanup compiler warnings.
|
|
|
|
commit ad5bb451ade552c44bef9119d907929ebc2c126f
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Mar 6 18:08:43 2007 +0100
|
|
|
|
Restructure POST directory to support of other CPUs, boards, etc.
|
|
|
|
commit a5284efd125967675b2e9c6ef7b95832268ad360
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Mar 6 18:01:47 2007 +0100
|
|
|
|
Fix HOSTARCH handling.
|
|
Patch by Mike Frysinger, Mar 05 2007
|
|
|
|
commit 07b7b0037aac5102939917d7cbe561b5c0d5aa44
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Mar 6 07:47:04 2007 +0100
|
|
|
|
[PATCH] Speed optimization of AMCC Sequoia/Rainier DDR2 setup
|
|
|
|
As provided by the AMCC applications team, this patch optimizes the
|
|
DDR2 setup for 166MHz bus speed. The values provided are also save
|
|
to use on a "normal" 133MHz PLB bus system. Only the refresh counter
|
|
setup has to be adjusted as done in this patch.
|
|
|
|
For this the NAND booting version had to include the "speed.c" file
|
|
from the cpu/ppc4xx directory. With this addition the NAND SPL image
|
|
will just fit into the 4kbytes of program space. gcc version 4.x as
|
|
provided with ELDK 4.x is needed to generate this optimized code.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 647d3c3eed0da1d1505eecabe0b0fab96f956e68
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Mar 4 01:36:05 2007 +0100
|
|
|
|
Some code cleanup.
|
|
|
|
commit 781e026c8aa6f7e9eb5f0e72cc4d20971219b148
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Feb 28 00:02:04 2007 -0600
|
|
|
|
mpc83xx: fix implicit declaration of function 'ft_get_prop' warnings
|
|
|
|
(cherry picked from c5bf13b02284c3204a723566a9bab700e5059659 commit)
|
|
|
|
commit 4feab4de7bfc2cb2fed36ad76f93c3a69659bbaf
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Tue Feb 27 23:51:42 2007 -0600
|
|
|
|
mpc83xx: Fix config of Arbiter, System Priority, and Clock Mode
|
|
|
|
The config value for:
|
|
* CFG_ACR_PIPE_DEP
|
|
* CFG_ACR_RPTCNT
|
|
* CFG_SPCR_TSEC1EP
|
|
* CFG_SPCR_TSEC2EP
|
|
* CFG_SCCR_TSEC1CM
|
|
* CFG_SCCR_TSEC2CM
|
|
|
|
Were not being used when setting the appropriate register
|
|
|
|
Added:
|
|
* CFG_SCCR_USBMPHCM
|
|
* CFG_SCCR_USBDRCM
|
|
* CFG_SCCR_PCICM
|
|
* CFG_SCCR_ENCCM
|
|
|
|
To allow full config of the SCCR.
|
|
|
|
Also removed random CFG_SCCR settings in MPC8349EMDS, TQM834x, and sbc8349
|
|
that were just bogus.
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit d51b3cf371cd441030460ef19d36b2924c361b1a
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Feb 22 20:06:57 2007 -0600
|
|
|
|
mpc83xx: update [local-]mac-address properties on UEC based devices
|
|
|
|
8360 and 832x weren't updating their [local-]mac-address
|
|
properties. This patch fixes that.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
|
|
commit 61f4f912acbe60776c5e00df1ec94094ce672957
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Feb 13 10:41:42 2007 -0600
|
|
|
|
mpc83xx: write MAC address to mac-address and local-mac-address
|
|
|
|
Some device trees have a mac-address property, some have local-mac-address,
|
|
and some have both. To support all of these device trees, this patch
|
|
updates ftp_cpu_setup() to write the MAC address to mac-address if it exists.
|
|
This function already updates local-mac-address.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 22d71a71f57fd5d38b27ac3848e50d790360a598
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Feb 27 18:41:08 2007 -0600
|
|
|
|
mpc83xx: add command line editing by default
|
|
|
|
commit 3fc0bd159103b536e1c54c6f4457a09b3aba66ca
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Feb 14 19:50:53 2007 -0600
|
|
|
|
mpc83xx: Disable G1TXCLK, G2TXCLK h/w buffers
|
|
|
|
Disable G1TXCLK, G2TXCLK h/w buffers. This patch
|
|
fixes a networking timeout issue with MPC8360EA (Rev.2) PBs.
|
|
|
|
Verified on Rev. 1.1, Rev. 1.2, and Rev. 2.0 boards.
|
|
|
|
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
|
|
Signed-off-by: Emilian Medve <Emilian.Medve@freescale.com>
|
|
|
|
commit d61853cf2472e0b8bcbd131461a93d1c49ff0c1f
|
|
Author: Xie Xiaobo <r63061@freescale.com>
|
|
Date: Wed Feb 14 18:27:17 2007 +0800
|
|
|
|
mpc83xx: Add DDR2 controller fixed/SPD Init for MPC83xx
|
|
|
|
The code supply fixed and SPD initialization for MPC83xx DDR2 Controller.
|
|
it pass DDR/DDR2 compliance tests.
|
|
|
|
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
|
|
|
|
commit b110f40bd180c6b560276589beedf753e97c46ce
|
|
Author: Xie Xiaobo <r63061@freescale.com>
|
|
Date: Wed Feb 14 18:27:06 2007 +0800
|
|
|
|
mpc83xx: Add the cpu specific code for MPC8360E rev2.0 MDS
|
|
|
|
MPC8360E rev2.0 have new spridr,and PVR value,
|
|
The MDS board for MPC8360E rev2.0 has 32M bytes Flash and 256M DDR2 DIMM.
|
|
|
|
Signed-off-by: Xie Xiaobo <X.Xie@freescale.com>
|
|
|
|
commit 8d172c0f0d85998a256a95b7459a5403a30380ed
|
|
Author: Xie Xiaobo <r63061@freescale.com>
|
|
Date: Wed Feb 14 18:26:44 2007 +0800
|
|
|
|
mpc83xx: Add the cpu and board specific code for MPC8349E rev3.1 MDS
|
|
|
|
MPC8349E rev3.1 have new spridr,and PVR value,
|
|
The MDS board for MPC8349E rev3.1 has 32M bytes Flash and 256M DDR2 DIMM.
|
|
|
|
Signed-off-by: Xie Xiaobo<X.Xie@freescale.com>
|
|
|
|
commit f6f5f709e5c8e4564c4dfeecfdf2279244f9c83b
|
|
Author: Joakim Tjernlund <joakim.tjernlund@transmode.se>
|
|
Date: Wed Jan 31 11:04:19 2007 +0100
|
|
|
|
mpc83xx: Fix empty i2c reads/writes in fsl_i2c.c
|
|
|
|
Fix empty i2c reads/writes, i2c_write(0x50, 0x00, 0, NULL, 0)
|
|
which is used to se if an slave will ACK after receiving its address.
|
|
|
|
Correct i2c probing to use this method as the old method could upset
|
|
a slave as it wrote a data byte to it.
|
|
|
|
Add a small delay in i2c_init() to let the controller
|
|
shutdown any ongoing I2C activity.
|
|
|
|
Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
|
|
commit 7a78f148d6a7298e4fface680dc7eacd877b1aba
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Wed Jan 31 15:54:29 2007 -0600
|
|
|
|
mpc83xx: Add support for the MPC8349E-mITX-GP
|
|
|
|
Add support for the MPC8349E-mITX-GP, a stripped-down version of the
|
|
MPC8349E-mITX. Bonus features include support for low-boot (BMS bit in
|
|
HRCW is 0) for the ITX and a README for the ITX and the ITX-GP.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit fab16807adad350f618024350c6950165c247c72
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Wed Jan 31 15:54:20 2007 -0600
|
|
|
|
mpc83xx: Delete sdram_init() for MPC8349E-mITX
|
|
|
|
There is no SDRAM on any of the 8349 ITX variants, so function sdram_init()
|
|
never does anything. This patch deletes it.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit a87c856eb411b9365937d0d4b9c21e46adbe1c14
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Fri Jan 19 10:43:26 2007 +0800
|
|
|
|
mpc83xx: Fix the LAW1/3 bug
|
|
|
|
The patch solves the alignment problem of the local bus access windows to
|
|
render accessible the memory bank and PHY registers of UPC 1 (starting at
|
|
0xf801 0000). What we actually did was to adjust the sizes of the bus
|
|
access windows so that the base address alignment requirement would be met.
|
|
|
|
Signed-off-by: Chereji Marian <marian.chereji@freescale.com>
|
|
Signed-off-by: Gridish Shlomi <gridish@freescale.com>
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit 97c4b397dce236a7318b304667bf89e59d08b17c
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Jan 30 16:15:31 2007 -0600
|
|
|
|
mpc83xx: don't hang if watchdog configured on 8360, 832x
|
|
|
|
don't hang if watchdog configured on 8360, 832x
|
|
|
|
The watchdog programming model is the same across all 83xx devices;
|
|
make the code reflect that.
|
|
|
|
commit b70047478570e371ce7223be342ce98afea0f7d6
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Jan 30 16:15:21 2007 -0600
|
|
|
|
mpc83xx: protect memcpy to bad address if a local-mac-address is missing from dt
|
|
|
|
protect memcpy to bad address if a local-mac-address is missing from dt
|
|
|
|
commit 6752ed088c75c26a89b70c46b7326a4cd6015f29
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Jan 30 16:15:04 2007 -0600
|
|
|
|
mpc83xx: make 8360 default environment fdt be 8360 (not 8349)
|
|
|
|
make 8360 default environment fdt be 8360 (not 8349)
|
|
|
|
commit a28899c910024a0226331df07207b1038c300c93
|
|
Author: Emilian Medve <Emilian.Medve@freescale.com>
|
|
Date: Tue Jan 30 16:14:50 2007 -0600
|
|
|
|
mpc83xx: Fix alternating tx error / tx buffer not ready bug in QE UEC
|
|
|
|
The problem is not gcc4 but the code itself. The BD_STATUS() macro can't
|
|
be used for busy-waiting since it strips the 'volatile' property from
|
|
the bd variable. gcc3 was working by pure luck.
|
|
|
|
This is a follow on patch to "Fix the UEC driver bug of QE"
|
|
|
|
commit 3e78a31cfe3d3022f46f67eb88e1281d5cc2eb89
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Tue Jan 30 14:08:30 2007 -0600
|
|
|
|
mpc83xx: Replace CONFIG_MPC8349 and use CONFIG_MPC834X instead
|
|
|
|
The code that is ifdef'd with CONFIG_MPC8349 is actually applicable to all
|
|
MPC834X class processors. Change the protections from CONFIG_MPC8349 to
|
|
CONFIG_MPC834X so they are more generic.
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit ae246dc6c1937c291014eadd90b6d48c438c7cb0
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Jan 25 13:40:55 2007 -0600
|
|
|
|
mpc83xx: add MPC832XEMDS and sbc8349 to MAKEALL
|
|
|
|
commit 4decd84e8f04279c5cfff7f8e907465ef8d8a3fb
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Jan 24 17:18:37 2007 -0600
|
|
|
|
mpc83xx: sort Makefile targets
|
|
|
|
reordered targets alphabetically
|
|
|
|
commit 91e25769771c1164ed63ffca0add49f934ae3343
|
|
Author: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Date: Tue Jan 16 11:38:14 2007 -0500
|
|
|
|
mpc83xx: U-Boot support for Wind River SBC8349
|
|
|
|
I've redone the SBC8349 support to match git-current, which
|
|
incorporates all the MPC834x updates from Freescale since the 1.1.6
|
|
release, including the DDR changes.
|
|
|
|
I've kept all the SBC8349 files as parallel as possible to the
|
|
MPC8349EMDS ones for ease of maintenance and to allow for easy
|
|
inspection of what was changed to support this board. Hence the SBC8349
|
|
U-Boot has FDT support and everything else that the MPC8349EMDS has.
|
|
|
|
Fortunately the Freescale updates added support for boards using CS0,
|
|
but I had to change spd_sdram.c to allow for board specific settings for
|
|
the sdram_clk_cntl (it is/was hard coded to zero, and that remains the
|
|
default if the board doesn't specify a value.)
|
|
|
|
Hopefully this should be mergeable as-is and require no whitespace
|
|
cleanups or similar, but if something doesn't measure up then let me
|
|
know and I'll fix it.
|
|
|
|
Thanks,
|
|
Paul.
|
|
|
|
commit 05031db456ab227f3e3752f37b9b812b65bb83ad
|
|
Author: Sam Song <samsongshu@yahoo.com.cn>
|
|
Date: Thu Dec 14 19:03:21 2006 +0800
|
|
|
|
mpc83xx: Remove a redundant semicolon in mpc8349itx.c
|
|
|
|
A redundant semicolon existed in mpc8349itx.c
|
|
should be removed.
|
|
|
|
Signed-off-by: Sam Song <samsongshu@yahoo.com.cn>
|
|
|
|
commit f35f358241c549be3f75cfe2eaa642914275b7ba
|
|
Author: Jerry Van Baren <gerald.vanbaren@comcast.net>
|
|
Date: Wed Dec 6 21:23:55 2006 -0500
|
|
|
|
mpc83xx: Put the version (and magic) after the HRCW.
|
|
|
|
Put the version (and magic) after the HRCW. This puts it in a fixed
|
|
location in flash, not at the start of flash but as close as we can get.
|
|
|
|
Signed-off-by: Jerry Van Baren <vanbaren@cideas.com>
|
|
|
|
commit 48aecd969171a6e99a55fae04933857787f9a5bd
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Thu Dec 7 21:14:51 2006 +0800
|
|
|
|
mpc83xx: Add the MPC832XEMDS board readme
|
|
|
|
Add the MPC832XEMDS board readme
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit 24c3aca3f1358b113d3215adb5433b156e99f72b
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Thu Dec 7 21:13:15 2006 +0800
|
|
|
|
mpc83xx: Add support for the MPC832XEMDS board
|
|
|
|
This patch supports DUART, ETH3/4 and PCI etc.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit e080313c32322e15ab5a18eb896a252858c57284
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Thu Dec 7 21:11:58 2006 +0800
|
|
|
|
mpc83xx: streamline the 83xx immr head file
|
|
|
|
For better format and style, I streamlined the 83xx head files,
|
|
including immap_83xx.h and mpc83xx.h. In the old head files, 1)
|
|
duplicated macro definition appear in the both files; 2) the structure
|
|
of QE immr is duplicated in the immap_83xx.h and immap_qe.h; 3) The
|
|
macro definition put inside the each structure. So, I cleaned up the
|
|
structure of QE immr from immap_83xx.h, deleted the duplicated stuff and
|
|
moved the macro definition to mpc83xx.h, Just like MPC8260.
|
|
|
|
CHANGELOG
|
|
|
|
*streamline the 83xx immr head file
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit ddd02492f43db5408f5ab9f823b0ba5796e28ef0
|
|
Author: Dave Liu <r63238@freescale.com>
|
|
Date: Wed Dec 6 11:38:17 2006 +0800
|
|
|
|
mpc83xx: Fix the UEC driver bug of QE
|
|
|
|
The patch prevents the GCC tool chain from striping useful code for
|
|
optimization. It will make UEC ethernet driver workable, Otherwise the
|
|
UEC will fail in tx when you are using gcc4.x. but the driver can work
|
|
when using gcc3.4.3.
|
|
|
|
CHANGELOG
|
|
|
|
*Prevent the GCC from striping code for optimization, Otherwise the UEC
|
|
will tx failed when you are using gcc4.x.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit ba58e4c9a9a917ce795dd16d4ec8d515f9f7aa35
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 1 21:11:36 2007 +0100
|
|
|
|
[PATCH] Update AMCC Katmai 440SPe eval board support
|
|
|
|
This patch updates the recently added Katmai board support. The biggest
|
|
change is the support of ECC DIMM modules in the 440SP(e) SPD DDR2
|
|
driver.
|
|
|
|
Please note, that still some problems are left with some memory
|
|
configurations. See the driver for more details.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 8c12045a3b06c5b6675d3fe02fbc9f545988129a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Mar 1 07:03:25 2007 +0100
|
|
|
|
[PATCH] I2C: Add missing default CFG_RTC_BUS_NUM & CFG_DTT_BUS_NUM
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ccbc7036648e465697ca298ba51e0e76dda352a0
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Feb 28 01:28:53 2007 +0100
|
|
|
|
SC3: fix typo in default environment
|
|
|
|
commit e344568b1b46af85ec32d815586f91bc115d6223
|
|
Author: Sergei Poselenov <sposelenov@emcraft.com>
|
|
Date: Tue Feb 27 20:15:30 2007 +0300
|
|
|
|
MCC200: Fixes for update procedure
|
|
|
|
- fix logic error in image type handling
|
|
- make sure file system images (cramfs etc.) get stored in flash
|
|
with image header stripped so they can be mounted through MTD
|
|
|
|
commit 743571145b37182757d4e688a77860b36ee77573
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Feb 27 14:26:04 2007 +0100
|
|
|
|
Minor code cleanup.
|
|
|
|
commit 638dd1458bbdc2a55d4b9e25c5c4e1f838a5dc72
|
|
Author: Sergei Poselenov <sposelenov@emcraft.com>
|
|
Date: Tue Feb 27 12:40:16 2007 +0300
|
|
|
|
MCC200 update - add LCD Progress Indicator
|
|
|
|
commit 6c7cac8c4fce0ea2bf8e15ed8658d87974155b44
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Feb 22 07:43:34 2007 +0100
|
|
|
|
[PATCH] get_dev() now unconditionally uses manual relocation
|
|
|
|
Since the relocation fix is not included yet and we're not sure how
|
|
it will be added, this patch removes code that required relocation
|
|
to be fixed for now.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 8274ec0bd01d2feb2c7f095eba78d42ea009798b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Feb 22 07:40:23 2007 +0100
|
|
|
|
[PATCH] Change systemace driver to select 8 & 16bit mode
|
|
|
|
As suggested by Grant Likely this patch enables the Xilinx SystemACE
|
|
driver to select 8 or 16bit mode upon startup.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 3a197b2fe49d6fa03978e60af2394efe9c70b527
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Wed Feb 21 16:52:31 2007 +0100
|
|
|
|
[PATCH v3] Add sync to ensure flash_write_cmd is fully finished
|
|
|
|
Some CPUs like PPC, BLACKFIN need sync() to ensure cfi flash write command
|
|
is fully finished. The sync() is defined in each CPU's io.h file. For
|
|
those CPUs which do not need sync for now, a dummy sync() is defined in
|
|
their io.h as well.
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit da04995c7dc6772013a9a0dc5c767f190c402478
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Feb 21 13:44:34 2007 +0100
|
|
|
|
[PATCH] Fix problem in systemace driver (ace_writew instead of ace_write)
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 751bb57107d78978ae08e697c3deba816f5be091
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 13:21:57 2007 +0100
|
|
|
|
[PATCH] Fix relocation problem with "new" get_dev() function
|
|
|
|
This patch enables the "new" get_dev() function for block devices
|
|
introduced by Grant Likely to be used on systems that still suffer
|
|
from the relocation problems (manual relocation neede because of
|
|
problems with linker script).
|
|
|
|
Hopefully we can resolve this relocation issue soon for all platform
|
|
so we don't need this additional code anymore.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d93e2212f962668b3dce091ff5edc33f2347fe37
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 13:17:42 2007 +0100
|
|
|
|
[PATCH] Update SystemACE driver for 16bit access
|
|
|
|
This patch removes some problems when the Xilinx SystemACE driver
|
|
is used with 16bit access on an big endian platform (like the
|
|
AMCC Katmai).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 874bb7b88fe9b4648e1288a387af2e31014a72f3
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 13:15:40 2007 +0100
|
|
|
|
[PATCH] Clean up Katmai (440SPe) linker script
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4745acaa1a603b67f6b9b7970365ebadd7d6586f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 10:57:08 2007 +0100
|
|
|
|
[PATCH] Add support for the AMCC Katmai (440SPe) eval board
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 0dc018ece13effc689e47479ea9ebf1c98a507f5
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 10:51:26 2007 +0100
|
|
|
|
[PATCH] I2C: Add support for multiple I2C busses for RTC & DTT
|
|
|
|
This patch switches to the desired I2C bus when the date/dtt
|
|
commands are called. This can be configured using the
|
|
CFG_RTC_BUS_NUM and/or CFG_DTT_BUS_NUM defines.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4037ed3b63923cfcec27f784a89057c3cbabcedb
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 10:43:34 2007 +0100
|
|
|
|
[PATCH] PPC4xx: Add 440SP(e) DDR2 SPD DIMM support
|
|
|
|
This patch adds support for the DDR2 controller used on the
|
|
440SP and 440SPe. It is tested on the Katmai (440SPe) eval
|
|
board and works fine with the following DIMM modules:
|
|
|
|
- Corsair CM2X512-5400C4 (512MByte per DIMM)
|
|
- Kingston ValueRAM KVR667D2N5/512 (512MByte per DIMM)
|
|
- Kingston ValueRAM KVR667D2N5K2/2G (1GByte per DIMM)
|
|
|
|
This patch also adds the nice functionality to dynamically
|
|
create the TLB entries for the SDRAM (tlb.c). So we should
|
|
never run into such problems with wrong (too short) TLB
|
|
initialization again on these platforms.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 36d830c9830379045f5daa9f542ac1c990c70068
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 10:35:42 2007 +0100
|
|
|
|
[PATCH] PPC4xx: Split 4xx SPD SDRAM init routines into 2 files
|
|
|
|
Since the existing 4xx SPD SDRAM initialization routines for the
|
|
405 SDRAM controller and the 440 DDR controller don't have much in
|
|
common this patch splits both drivers into different files.
|
|
|
|
This is in preparation for the 440 DDR2 controller support (440SP/e).
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 79b2d0bb2eae09602448f7a7cb56530d2f31e6c6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Feb 20 10:27:08 2007 +0100
|
|
|
|
[PATCH] PPC4xx: Add support for multiple I2C busses
|
|
|
|
This patch adds support for multiple I2C busses on the PPC4xx
|
|
platforms. Define CONFIG_I2C_MULTI_BUS in the board config file
|
|
to make use of this feature.
|
|
|
|
It also merges the 405 and 440 i2c header files into one common
|
|
file 4xx_i2c.h.
|
|
|
|
Also the 4xx i2c reset procedure is reworked since I experienced
|
|
some problems with the first access on the 440SPe Katmai board.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit eb867a76238fb38e952c37871b16d0d7fd61c95f
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:45 2007 +0100
|
|
|
|
[PATCH 9_9] Use "void *" not "unsigned long *" for block dev read_write buffer pointers
|
|
|
|
Block device read/write is anonymous data; there is no need to use a
|
|
typed pointer. void * is fine. Also add a hook for block_read functions
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 53758fa20e935cc87eeb0519ed365df753a6f289
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:38 2007 +0100
|
|
|
|
[PATCH 8_9] Add block_write hook to block_dev_desc_t
|
|
|
|
Preparation for future patches which support block device writing
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f4852ebe6ca946a509667eb68be42026f837be76
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:31 2007 +0100
|
|
|
|
[PATCH 7_9] Replace ace_readw_ace_writeb functions with macros
|
|
|
|
Register read/write does not need to be wrapped in a full function. The
|
|
patch replaces them with macros.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 3a8ce9af6fcb5744a7851b4440c07688acc40844
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:23 2007 +0100
|
|
|
|
[PATCH 6_9] Move common_cmd_ace.c to drivers_systemace.c
|
|
|
|
The code in this file is not a command; it is a device driver. Put it in
|
|
the correct place. There are zero functional changes in this patch, it
|
|
only moves the file.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 984618f3e7794c783ec8d1511e74c6ee2d69bfe4
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:16 2007 +0100
|
|
|
|
[PATCH 5_9] Whitespace fixup on common_cmd_ace.c (using Lindent)
|
|
|
|
This patch is in preparation of additional changes to the sysace driver.
|
|
May as well take this opportunity to fixup the inconsistent whitespace since
|
|
this file is about to undergo major changes anyway.
|
|
|
|
There are zero functional changes in this patch. It only cleans up the
|
|
the whitespace.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 80ba981d940471fe7e539e64fa3d2bd80002beda
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:07 2007 +0100
|
|
|
|
[PATCH 4_4] Remove local implementation of isprint() in ft_build.c
|
|
|
|
isprint is already defined in ctype.c
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit c95c4280d751ca078c2ff58228d2f2b44ccf0600
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:05:00 2007 +0100
|
|
|
|
[PATCH 3_9] Move buffer print code from md command to common function
|
|
|
|
Printing a buffer is a darn useful thing. Move the buffer print code
|
|
into print_buffer() in lib_generic/
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 99b0f0fd3fbf2572ae1a7723dd90cffc8e85130a
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:04:52 2007 +0100
|
|
|
|
[PATCH 2_4] Use config.h, not xparameters.h, for xilinx targets
|
|
|
|
Change the xilinx device drivers and board code to include config.h
|
|
instead of xparameters.h directly. config.h always includes the
|
|
correct xparameters file. This change reduces the posibility of
|
|
including the wrong file when adding a new xilinx board port
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 735dd97b1b20e777d059c7b389fe9d70cd3f80c7
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Feb 20 09:04:34 2007 +0100
|
|
|
|
[PATCH 1_4] Merge common get_dev() routines for block devices
|
|
|
|
Each of the filesystem drivers duplicate the get_dev routine. This change
|
|
merges them into a single function in part.c
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit f5fcc3c20b65554e98a165542c36ee0c610a2d81
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Feb 19 23:09:51 2007 +0100
|
|
|
|
MCC200: Software Updater: allow both "ramdisk" and "filesystem" types
|
|
as root file system images.
|
|
|
|
commit 489c696ae7211218961d159e43e722d74c36fcbc
|
|
Author: Sergei Poselenov <sposelenov@emcraft.com>
|
|
Date: Wed Feb 14 14:30:28 2007 +0300
|
|
|
|
MCC200: Extensions to Software Update Mechanism
|
|
|
|
Update / extend Software Update Mechanism for MCC200 board:
|
|
|
|
- Add support for rootfs image added. The environment variables
|
|
"rootfs_st" and "rootfs_nd" can be used to override the default
|
|
values of the image start and end.
|
|
- Remove excessive key check code.
|
|
- Code cleanup.
|
|
|
|
commit 4be23a12f23f1372634edc3215137b09768b7949
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Feb 19 08:23:15 2007 +0100
|
|
|
|
[PATCH] Update Sequoia EBC configuration (NOR FLASH)
|
|
|
|
As spotted by Matthias Fuchs, the READY input should not be
|
|
enabled for the NOR FLASH on the Sequoia board.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2605e90bf676d48123afe5719a846d2b52b24aac
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Fri Feb 16 07:57:42 2007 +0100
|
|
|
|
[PATCH] Added support for the jupiter board.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 497d012e5be0194e1084073d0081eb1a844796b2
|
|
Author: Gary Jennejohn <garyj@pollux.denx.de>
|
|
Date: Mon Feb 12 13:11:50 2007 +0100
|
|
|
|
LPC2292: patch from Siemens.
|
|
|
|
commit b0b1a920aebead0d44146e73676ae9d80fffc8e2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Feb 10 08:49:31 2007 +0100
|
|
|
|
[PATCH] Add missing p3mx.h file to repository (ups)
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 53d4a4983fb9b3ae5f7b2f10c599aca2b1b4034a
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Fri Feb 9 10:45:42 2007 +0100
|
|
|
|
[Motion-PRO] Preliminary support for the Motion-PRO board.
|
|
|
|
commit 5a753f98c6a01bd1c61a9a3f95e8329a35f62994
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Feb 7 16:51:08 2007 +0100
|
|
|
|
[PATCH] Update some AMCC 4xx board config files (set initrd_high)
|
|
|
|
Some boards that can have more than 768MBytes of SDRAM need to
|
|
set "initrd_high", so that the initrd can be accessed by the
|
|
Linux kernel.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 7372ca68227930d03cffa548310524cad5b96733
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Feb 2 12:44:22 2007 +0100
|
|
|
|
[PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
|
|
|
|
Previously the strapping DCR/SDR was read to determine if the internal PCI
|
|
arbiter is enabled or not. This strapping bit can be overridden, so now
|
|
the current status is read from the correct DCR/SDR register.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2aa54f651a42d198673318f07a20c89a43e4d197
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Feb 2 12:42:08 2007 +0100
|
|
|
|
[PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 23744d6b5bf17592eb6a0ef4f318f6089f55993b
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Feb 1 13:22:41 2007 +0100
|
|
|
|
[PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
|
|
|
|
When PCI PNP is enabled the pci pnp configuration routine is called
|
|
which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
|
|
problems with some PCI cards. For now disable the PCI PNP configuration.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 2902fadade3be7659467e8d074048c6b7068f5c0
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jan 31 16:56:10 2007 +0100
|
|
|
|
[PATCH] Update 440EPx/440GRx cpu detection
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d5ea287b02a6945c3977410e364a879dd1a555c8
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jan 31 16:38:04 2007 +0100
|
|
|
|
[PATCH] Update esd cpci5200 files
|
|
|
|
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
|
|
|
|
commit 8b7d1f0ab7d7c4fe3160bbf74a7e9690d9f3a3ab
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jan 31 16:37:34 2007 +0100
|
|
|
|
[PATCH] Add support for esd mecp5200 board
|
|
|
|
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
|
|
|
|
commit 71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Jan 31 12:38:50 2007 +0100
|
|
|
|
[PATCH] Remove unneccessary yellowstone board config file
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e802594b6fa1b166308820c276b96dc0d7cc731c
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jan 30 17:06:10 2007 +0100
|
|
|
|
[PATCH] Update Sequoia (440EPx) config file
|
|
|
|
The config file now handles the 2nd target, the Rainier (440GRx)
|
|
evaluation board better. Additionally the PPC input clock was
|
|
adjusted to match the correct value of 33.0 MHz.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 700200c67e73b83751418abe7815840dca8fd6cb
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jan 30 17:04:19 2007 +0100
|
|
|
|
[PATCH] Merge Yosemite & Yellowstone board ports
|
|
|
|
Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
|
|
share one config file and all board specific files. This way we
|
|
don't have to maintain two different sets of files for nearly
|
|
identical boards.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1bbf5eae322f5f1f6427ecc3ac13a0cb7dba8ad6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jan 30 15:01:49 2007 +0100
|
|
|
|
[PATCH] Update Prodrive SCPU (PDNB3 variant) board
|
|
|
|
SCPU doesn't use redundant environment in flash.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6304430ed642ea8fa15c9e5af965ac2e033eec45
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Jan 30 12:51:07 2007 +0100
|
|
|
|
[PATCH] alpr: Update alpr board config file
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit f8db84f132b1e335f20f96138a1f09ed97b08664
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Jan 30 00:50:40 2007 +0100
|
|
|
|
LPC2292 SODIMM port coding style cleanup.
|
|
|
|
commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3
|
|
Author: Gary Jennejohn <garyj@pollux.denx.de>
|
|
Date: Wed Jan 24 12:16:56 2007 +0100
|
|
|
|
Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
|
|
|
|
commit 2daf046ba627f85f44195815778140039636244e
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue Jan 23 17:22:06 2007 +0100
|
|
|
|
[iDMR] Add MTD and JFFS2 support, also add default partition definition.
|
|
|
|
commit f7db33101fbc9c8f0a10738ce87034875a17aeb9
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue Jan 23 14:21:14 2007 +0100
|
|
|
|
[iDMR] Flash driver on initialisation write-protects some sectors,
|
|
currently sectors 0-3. Sector 3 does not need to be protected, though
|
|
(U-boot occupies sectors 0-1 and the environment sector 2). This commit
|
|
fixes this, i.e., only sectors 0-2 are protected.
|
|
|
|
commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue Jan 23 14:11:22 2007 +0100
|
|
|
|
[iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
|
|
"mii device" results in "Unexpected exception"). Fixing this properly
|
|
requires some clean-up in the FEC drivers infrastructure for ColdFire, so
|
|
this commit disables MII commads for now.
|
|
|
|
commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Tue Jan 23 13:25:22 2007 +0100
|
|
|
|
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
|
|
Identification Register (CIR).
|
|
|
|
commit fdef388758506765d4d6a7155c8f1584c63ff581
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Mon Jan 22 13:19:21 2007 +0800
|
|
|
|
use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAP
|
|
The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007
|
|
fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support
|
|
mpc7448hpc2 board.
|
|
|
|
commit a4012396645533aef218354eeba754dff0deace8
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Fri Jan 19 23:08:39 2007 +0100
|
|
|
|
Minor code cleanup.
|
|
|
|
commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Fri Jan 19 19:57:10 2007 +0100
|
|
|
|
[PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Fri Jan 19 18:05:26 2007 +0100
|
|
|
|
[PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
|
|
if you must swap the bytes between reading/writing.
|
|
(Needed for the SC3 board)
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Jan 18 16:05:47 2007 +0100
|
|
|
|
[PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Jan 18 11:54:52 2007 +0100
|
|
|
|
[PATCH] Update Prodrive P3Mx support
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 34167a36c29ee946b727465db5c014746a08e978
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Jan 18 11:48:10 2007 +0100
|
|
|
|
[PATCH] Add missing Taishan config file
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cb4820725e9fc409c5cbc8e83054a6ed522d2111
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Jan 18 11:28:51 2007 +0100
|
|
|
|
[PATCH] Fix: Compilerwarnings for SC3 board.
|
|
The EBC Configuration Register is now by CFG_EBC_CFG definable
|
|
Added JFFS2 support for the SC3 board.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Thu Jan 18 10:25:34 2007 +0100
|
|
|
|
[PATCH] Add support for AMCC Taishan PPC440GX eval board
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Jan 16 18:30:50 2007 +0100
|
|
|
|
Raname solidcard3 into sc3; add redundant env for sc3
|
|
|
|
commit 1bbbbdd20fcec9933697000dcf55ff7972622596
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Jan 16 12:46:35 2007 +0100
|
|
|
|
Update default environment for Solidcard3
|
|
|
|
commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Jan 15 09:46:29 2007 +0100
|
|
|
|
[PATCH] Fix 440SPe rev B detection from previous patch
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a443d31410c571ee8f970da819a44d698fdd6b1f
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Sun Jan 14 13:35:31 2007 +0100
|
|
|
|
[FIX] correct I2C Writes for the LM81 Sensor.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 0bba5452835f19a61204edcda3a58112fd8e2208
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Jan 13 11:17:10 2007 +0100
|
|
|
|
Undo commit 3033ebb2: reset command does not take any arguments
|
|
|
|
Haiying Wang's modification to the reset command was broken, undo it.
|
|
|
|
Signed-off-by: Wolfgang Denk <wd@denx.de>
|
|
|
|
commit 95981778cff0038fd9941044d6a3eda810e33258
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 08:01:03 2007 +0100
|
|
|
|
[PATCH] Update 440SP(e) cpu revisions
|
|
|
|
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 07:59:56 2007 +0100
|
|
|
|
[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
|
|
|
|
Now the board revision and the current PCI bus speed are printed after
|
|
the board message.
|
|
|
|
Also the EBC initialising is now done via defines in the board config
|
|
file.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 36adff362c2c0141ff8a810d42a7e478f779130f
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 07:59:19 2007 +0100
|
|
|
|
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
|
|
|
|
Now the board revision and the current PCI bus speed are printed after
|
|
the board message.
|
|
|
|
Also the EBC initialising is now done via defines in the board config
|
|
file.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 13 07:57:51 2007 +0100
|
|
|
|
[PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
|
|
|
|
Now the board revision and the current PCI bus speed are printed after
|
|
the board message.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ca43ba18e910206ef8063e4b22d282630bff3fd2
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Jan 11 15:44:44 2007 +0100
|
|
|
|
Added support for the SOLIDCARD III board from Eurodesign
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 6abaee42621c07e81a2cd189ad4368b5e8c50280
|
|
Author: Reinhard Thies <Reinhard.Thies@web.de>
|
|
Date: Wed Jan 10 14:41:14 2007 +0100
|
|
|
|
Adjusted default environment for cam5200 board.
|
|
|
|
commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Jan 10 15:35:52 2007 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit 787fa15860a57833e50bd30555079a9cd4e519b8
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Jan 10 01:28:39 2007 +0100
|
|
|
|
Fix auto_update for MCC200 board.
|
|
|
|
The invocation of do_auto_update() is moved to the end of the
|
|
misc_init_r() function, after the flash mappings have been
|
|
initialized. Please find attached a patch that implements that
|
|
change.
|
|
|
|
Also correct the decoding of the keypad status. With this update, the
|
|
key that will trigger the update is Column 2, Row 2.
|
|
|
|
commit d9384de2f571046e71081bae22b49e3d5ca2e3d5
|
|
Author: Marian Balakowicz <m8@semihalf.com>
|
|
Date: Wed Jan 10 00:26:15 2007 +0100
|
|
|
|
CAM5200 flash driver modifications:
|
|
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
|
|
- add second build target 'cam5200_niosflash' which still uses custom driver
|
|
|
|
commit 67fea022fa957f59653b5238c7496f80a6b70432
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 16:02:48 2007 +0100
|
|
|
|
SPC1920: cleanup memory contoller setup
|
|
|
|
commit 8fc2102faa23593c80381437c09f7745a14deb40
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:14 2007 +0100
|
|
|
|
Fix the cpu speed setup to work with all boards.
|
|
|
|
commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:13 2007 +0100
|
|
|
|
SPC1920: add support for the FM18L08 Ramtron FRAM
|
|
|
|
commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:13 2007 +0100
|
|
|
|
SPC1920: update the HPI register addresses to work with the second
|
|
generation of hardware
|
|
|
|
commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:13 2007 +0100
|
|
|
|
Miscellanious spc1920 related cleanups
|
|
|
|
commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue Jan 9 14:57:12 2007 +0100
|
|
|
|
SPC1920 GO/NOGO led should be set to color red in U-Boot
|
|
|
|
commit 0be62728aac459ba268d6d752ed49ec0e2bc7348
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:12 2007 +0100
|
|
|
|
Add support for the DS3231 RTC
|
|
|
|
commit 8139567b60d678584b05f0718a681f2047c5e14f
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:11 2007 +0100
|
|
|
|
SMC1 uses external CLK4 instead of BRG on spc1920
|
|
|
|
commit d8d9de1a02fbd880b613d607143d1f57342affc7
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:10 2007 +0100
|
|
|
|
Update the SPC1920 CMB PLD driver
|
|
|
|
commit 3f34f869162750e5e999fd140f884f5de952bcfe
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:10 2007 +0100
|
|
|
|
Add / enable I2C support on the spc1920 board
|
|
|
|
commit d28707dbce1e9ac2017ad051da4133bf22b4204f
|
|
Author: Markus Klotzbuecher <mk@creamnet.de>
|
|
Date: Tue Jan 9 14:57:10 2007 +0100
|
|
|
|
Add support for the tms320671x host port interface (HPI)
|
|
|
|
commit f4eb54529bb3664c3a562e488b460fe075f79d67
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Jan 7 00:13:11 2007 +0100
|
|
|
|
Prepare for release 1.2.0
|
|
|
|
commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 6 15:58:09 2007 +0100
|
|
|
|
[PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
|
|
|
|
This patch fixes a problem with an incorrect setup for the refresh
|
|
timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit f16c1da9577f06c5fc08651a4065537407de4635
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Jan 6 15:56:13 2007 +0100
|
|
|
|
[PATCH] Update ALPR board files
|
|
|
|
This update brings the ALPR board support to the newest version.
|
|
It also fixes a problem with the NAND driver.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cd1d937f90250a32988c37b2b4af8364d25de8ed
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jan 5 11:46:05 2007 +0100
|
|
|
|
[PATCH] nand: Fix problem with oobsize calculation
|
|
|
|
Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
|
|
|
|
The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
|
|
returns a 0x15. In the code fragment below bits [1:0] determine the
|
|
page size, it is ANDed via "(extid & 0x3)" then shifted out. The
|
|
next field is also ANDed with 0x3. However this is a one bit field
|
|
as defined in the Hynix and Samsung parts in the 4th ID byte that
|
|
determins the oobsize, not a two bit field. It works on Samsung as
|
|
bits[3:2] are 01. However for the Hynix there is a 11 in these two
|
|
bits, so the oob size gets messed up.
|
|
|
|
I checked the correct linux code and the suggested fix from Brian is
|
|
also available in the linux nand mtd driver.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jan 5 10:40:36 2007 +0100
|
|
|
|
[PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
|
|
|
|
This fix will make the MAL burst disabling patch for the Linux
|
|
EMAC driver obsolete.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 023889838282b6237b401664f22dd22dfba2c066
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Jan 5 10:38:05 2007 +0100
|
|
|
|
[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
|
|
|
|
This code will optimize the DDR2 controller setup on a board specific
|
|
basis.
|
|
|
|
Note: This code doesn't work right now on the NAND booting image for the
|
|
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cce4acbb68398634b8d011ed7bb0d12269c84230
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Thu Dec 28 19:08:21 2006 +0100
|
|
|
|
Few V38B changes:
|
|
- fix a typo in V38B config file
|
|
- move watchdog initialisation earlier in the boot process
|
|
- add "wdt=off" to default kernel command line (disables kernel watchdog)
|
|
|
|
commit 92eb729bad876725aeea908d2addba0800620840
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Dec 27 01:26:13 2006 +0100
|
|
|
|
Fix bug in adaption of Stefano Babic's CFI driver patch.
|
|
|
|
commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Dec 24 01:42:57 2006 +0100
|
|
|
|
Minor code cleanup.
|
|
|
|
commit d784fdb05900ada3686d5778783e1fb328e9fb66
|
|
Author: Stefano Babic <sbabic@denx.de>
|
|
Date: Tue Dec 12 00:22:42 2006 +0100
|
|
|
|
Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
|
|
|
|
commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Fri Dec 22 14:29:40 2006 +0100
|
|
|
|
[PATCH] Fix sequoia flash autodetection (finally correct)
|
|
|
|
Now 32MByte and 64MByte FLASH is know to work and other
|
|
configurations should work too.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 82e5236a8b719543643fd26d5827938ab2b94818
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Fri Dec 22 10:30:26 2006 +0100
|
|
|
|
Minor code cleanup; update CHANGELOG.
|
|
|
|
commit fa23044564091f05d9695beb7b5b9a931e7f41a4
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Dec 21 17:17:02 2006 +0100
|
|
|
|
Added support for the TQM8272 board from TQ
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c
|
|
Author: Heiko Schocher <hs@pollux.denx.de>
|
|
Date: Thu Dec 21 16:14:48 2006 +0100
|
|
|
|
[PATCH] Add support for the UC101 board from MAN.
|
|
|
|
Signed-off-by: Heiko Schocher <hs@denx.de>
|
|
|
|
commit c84bad0ef60e7055ab0bd49b93069509cecc382a
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Dec 20 00:29:43 2006 +0100
|
|
|
|
Fix to make the baudrate changes immediate for the MCF52x2 family.
|
|
|
|
commit daa6e418bcc0c717752e8de939c213c790286096
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Dec 20 00:27:32 2006 +0100
|
|
|
|
Preliminary support for the iDMR board (ColdFire).
|
|
|
|
commit cdb97a6678826f85e7c69eae6a1c113d034c9b10
|
|
Author: Andrei Safronov <safronov@pollux.denx.de>
|
|
Date: Fri Dec 8 16:23:08 2006 +0100
|
|
|
|
automatic update mechanism
|
|
|
|
commit 9d27b3a0685ff99fc477983f315c04d49f657a8a
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Mon Dec 4 17:56:59 2006 +0800
|
|
|
|
Slight code clean up.
|
|
Add comments, delete duplicate define and remove spaces.
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 4dbcd69e3e2776ea334590d5768e3692c5fae5c1
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Mon Dec 4 17:54:21 2006 +0800
|
|
|
|
Introduce PLL_CFG[0:4] table for processor 7448/7447A/7455/7457. The original
|
|
multiplier table can not refect the real PLL clock behavior of these
|
|
processors. Please refer to the hardware specification for detailed
|
|
information of the corresponding processors.
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 4efe20c9579011d9987f62ed7d35ee8cdc1cf0e0
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Mon Dec 4 14:46:23 2006 +0800
|
|
|
|
Remove the static MAC address, ip address, server ip, netmask and
|
|
gateway ip for network setting.
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 6f12c61cf31ed73d72ddfcfc712a854a3a177aaf
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Mon Dec 4 14:33:08 2006 +0800
|
|
|
|
Remove the duplicate memory test code for mpc744ihpc2 board.
|
|
If a memory test is needed, please use the functions in
|
|
post/memory.c or memtest command.
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit c9c1eeed7dd193fa65fb194654132040d49d4d3a
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Fri Dec 1 19:01:25 2006 +0800
|
|
|
|
Fix the exception occuring in RAM table search issue.
|
|
The original search_one_table() function code can only processes the search
|
|
for the exception occurring in FLASH/ROM, because the exception and fixup
|
|
table usually locate in FLASH. If the exception address is also in
|
|
FLASH, it will be OK.
|
|
If the exception occurs in RAM, after the u-boot relocation, a
|
|
relocation offset should be added.
|
|
|
|
clean up the code in cpu/74xx_7xx/cpu.c
|
|
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit ee311214e0d216f904feea269599d0934bf71f23
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Fri Dec 1 11:47:36 2006 +0800
|
|
|
|
Clean up the code according to codestyle:
|
|
(1) remove some C++ comments.
|
|
(2) remove trailing white space.
|
|
(3) remove trailing empty line.
|
|
(4) Indentation by table.
|
|
(5) remove {} in one line condition.
|
|
(6) add space before '(' in function call.
|
|
Remove some weird printf () output.
|
|
Add necessary comments.
|
|
Modified Makefile to support building in a separate directory.
|
|
|
|
commit dd520bf314c7add4183c5191692180f576f96b60
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Nov 30 18:02:20 2006 +0100
|
|
|
|
Code cleanup.
|
|
|
|
commit 8d9a8610b8256331132227e9e6585c6bd5742787
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Nov 30 01:54:07 2006 +0100
|
|
|
|
Code cleanup. Update CHANGELOG.
|
|
|
|
commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Wed Nov 29 16:23:42 2006 +0100
|
|
|
|
[PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals
|
|
|
|
The soc node of the mpc52xx needs to be loaded with the IPB bus frequency,
|
|
not the XLB frequency.
|
|
|
|
This patch depends on the previous patches for MPC52xx device tree support
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
|
|
|
|
commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 29 15:42:37 2006 +0100
|
|
|
|
[PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards
|
|
|
|
This patch adds support for the Prodrive P3M750 (PPC750 & MV64460)
|
|
and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are
|
|
quite similar and share the same board directory "prodrive/p3mx"
|
|
and the same config file "p3mx.h".
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1bdd46832aeb569f5e04b1f20f64318525b6525a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 29 12:53:15 2006 +0100
|
|
|
|
[PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command
|
|
|
|
In the bootvx command the load address was only read from the env
|
|
variable "loadaddr" and not optionally passed as paramter as described
|
|
in the help. This is fixed with this patch. The behaviour is now the
|
|
same as in the bootelf command.
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 29 12:03:57 2006 +0100
|
|
|
|
[PATCH] include/ppc440.h minor error affecting interrupts
|
|
|
|
Fixed include/ppc440.c for UIC address Bug
|
|
|
|
Corrects bug affecting the addresses for the universal interrupt
|
|
controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips.
|
|
|
|
Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a
|
|
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
Date: Tue Nov 28 16:17:27 2006 -0600
|
|
|
|
Make fsl-i2c not conflict with SOFT I2C
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 14198bf768fdc958e3c1afd2404e5262208e98d7
|
|
Author: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
|
|
Date: Tue Nov 28 16:17:18 2006 -0600
|
|
|
|
Fix I2C master address initialization.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit cf3d045e51ca8dcc6cf759827140861d6ac25c04
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Nov 28 23:31:19 2006 -0600
|
|
|
|
Assign maintainers for mpc8349emds and mpc8360emds
|
|
|
|
Dave for mpc8360emds, and me for mpc8349emds.
|
|
|
|
commit 1aa934c81b77f2080d3ca4b226eab67b17a33961
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Tue Nov 28 23:28:33 2006 -0600
|
|
|
|
Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c
|
|
|
|
give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src
|
|
since they are passed by reference to ucc_get_cmxucr_reg and assigned.
|
|
|
|
commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Nov 28 12:09:35 2006 -0600
|
|
|
|
mpc83xx: Miscellaneous code style fixes
|
|
|
|
Implement various code style fixes and similar changes.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 17:55:49 2006 +0100
|
|
|
|
[PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux.
|
|
|
|
This patch adds the code and configuration necessary to boot with an
|
|
arch/powerpc Linux kernel.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@gmail.com>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit e732faec95a83cb468b4850ae807c8301dde8f6a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 16:09:24 2006 +0100
|
|
|
|
[PATCH] PPC4xx: 440SP Rev. C detection added
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 11:04:45 2006 +0100
|
|
|
|
[PATCH] nand: Fix patch merge problem
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 58e3b14c18ed3288ceef8d086946dbf3df64ccf2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Nov 28 11:04:45 2006 +0100
|
|
|
|
[PATCH] nand: Fix patch merge problem
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 27 22:53:53 2006 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit f6e495f54cdb8fe340b9c03deab40ad746d52fae
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:43:25 2006 +0100
|
|
|
|
[PATCH] 4xx_enet.c: Correct the setting of zmiifer register
|
|
|
|
Patch below corrects the setting of the zmiifer register, it was
|
|
overwritting the register rather than ORing the settings.
|
|
|
|
Signed-off-by: Neil Wilson <NWilson@airspan.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit d1a72545296800b7e219f93104ad5836f0003d66
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:34:10 2006 +0100
|
|
|
|
[PATCH] Select NAND embedded environment from board configuration
|
|
|
|
The current NAND Bootloader setup forces the environment
|
|
variables to be in line with the bootloader. This change
|
|
enables the configuration to be made in the board include
|
|
file instead so that it can be individually enabled.
|
|
|
|
Signed-off-by: Nick Spence <nick.spence@freescale.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 15784862857c3c2214498defcfed84ff137fb81e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:22:19 2006 +0100
|
|
|
|
[PATCH] nand_wait() timeout fixes
|
|
|
|
Two fixes for the nand_wait() function in
|
|
drivers/nand/nand_base.c:
|
|
|
|
1. Use correct timeouts. The original timeouts in Linux
|
|
source are 400ms and 20ms not 40s and 20s
|
|
|
|
2. Return correct error value in case of timeout. 0 is
|
|
interpreted as OK.
|
|
|
|
Signed-off-by: Rui Sousa <rui.sousa@laposte.net>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit da5553b095bf04f4f109ad7e565dae3aba47b230
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 17:04:06 2006 +0100
|
|
|
|
[PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel
|
|
|
|
This patch allows an arch/ppc kernel to be booted by just passing 1 or 2
|
|
arguments to bootm. It removes the getenv("disable_of") test that used
|
|
to be used for this purpose.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit a9398e018593782c5fa7d0741955fc1256b34c1e
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 27 15:32:42 2006 +0100
|
|
|
|
Minor code cleanup. Update CHANGELOG.
|
|
|
|
commit 1729b92cde575476684bffe819d0b7791b57bff2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:52:04 2006 +0100
|
|
|
|
[PATCH] 4xx: Fix problem with board specific reset code (now for real)
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:49:51 2006 +0100
|
|
|
|
[PATCH] alpr: remove unused board specific flash driver
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:48:41 2006 +0100
|
|
|
|
[PATCH] 4xx: Fix problem with board specific reset code
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit ec0c2ec725aec9524a177a77ce75559e644a931a
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:46:06 2006 +0100
|
|
|
|
[PATCH] Remove testing 4xx enet PHY setup
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 27 14:12:17 2006 +0100
|
|
|
|
[PATCH] Update Prodrive ALPR board support (440GX)
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 58b485776698c3d71ec5a215e392123b4c15afa3
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon Nov 27 11:51:21 2006 +0100
|
|
|
|
Add a small README with information on the generic ohci driver.
|
|
|
|
commit ae3b770e4eae8e98b6e9e29662e18c47fdf0171f
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon Nov 27 11:46:46 2006 +0100
|
|
|
|
Fix some endianness issues related to the generic ohci driver
|
|
|
|
commit 7b59b3c7a8ce2e4b567abf99c1cd667bf35b9418
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon Nov 27 11:44:58 2006 +0100
|
|
|
|
Introduced the configuration option CONFIG_USB_OHCI_NEW in order to be able
|
|
to choose between the old and the generic OHCI drivers.
|
|
|
|
commit 53e336e9ffc51035bdc4e5867631b3378761b4df
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon Nov 27 11:43:09 2006 +0100
|
|
|
|
Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
|
|
and adapted board configs TQM5200 and yosemite accordingly. This commit
|
|
also makes the maximum number of root hub ports configurable
|
|
(CFG_USB_OHCI_MAX_ROOT_PORTS).
|
|
|
|
commit 78d620ebb5871d252270dedfad60c6568993b780
|
|
Author: Wolfgang Denk <wd@atlas.denx.de>
|
|
Date: Thu Nov 23 22:58:58 2006 +0100
|
|
|
|
Updates for TQM5200 modules:
|
|
- fix off-by-one error in board/tqm5200/cam5200_flash.c error message
|
|
- simplify "udate" definitions
|
|
|
|
commit 2053283304eeddf250d109e6791eb6fa4cad14f7
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Wed Nov 22 13:20:50 2006 +0100
|
|
|
|
[PATCH] PPC4xx start.S: Fix for processor errata
|
|
|
|
Fixed cpu/ppc4xx/start.S for 440EPx Errata: further corrects PPC440EPx
|
|
errata 1.12: 440_33 by moving patch up in code.
|
|
|
|
Signed-off-by: Jeff Mann <mannj@embeddedplanet.com>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 4ef6251403f637841000e0fef9e832aa01339822
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 20 20:39:52 2006 +0100
|
|
|
|
[PATCH] Update AMCC Sequoia config file to support 64MByte NOR FLASH
|
|
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit e4bbd8da164b976d38616bd9c69c5e86e193cdf0
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 20 10:28:30 2006 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit 260421a21e934a68d31fb6125b0fbd2631a8ca20
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Mon Nov 13 13:55:24 2006 +0100
|
|
|
|
[PATCH] CFI driver AMD Command Set Top boot geometry reversal, etc. [Updated]
|
|
|
|
* Adds support for AMD command set Top Boot flash geometry reversal
|
|
* Adds support for reading JEDEC Manufacturer ID and Device ID
|
|
* Adds support for displaying command set, manufacturer id and
|
|
device ids (flinfo)
|
|
* Makes flinfo output to be consistent when CFG_FLASH_EMPTY_INFO defined
|
|
* Removes outdated change history (refer to git log instead)
|
|
|
|
Signed-off-by: Tolunay Orkun <listmember@orkun.us>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit b21b511d4c50408f4853f46f06b601272196223f
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Nov 12 21:13:23 2006 +0100
|
|
|
|
Update CHANGELOG
|
|
|
|
commit ce3f1a40c507afbab06c5eb58ccdc6713eda3245
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sat Nov 11 22:48:22 2006 +0100
|
|
|
|
Disable the watchdog in the default config for the V38B board.
|
|
|
|
commit 44a47e6db2694841211f1c8fdbafd36992e9cd1a
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Sat Nov 11 22:43:00 2006 +0100
|
|
|
|
Change the GPIO pin multiplexing configuration for V38B. The USB GPIO pin
|
|
group is enabled for USB earlier (in cpu_init_f() instead of
|
|
usb_lowlevel_init()).
|
|
|
|
commit 91650b3e4de688038d4f71279c44858e3e2c6870
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Nov 6 17:06:36 2006 +0100
|
|
|
|
Sequential accesses to non-existent memory must be synchronized,
|
|
at least on G2 cores.
|
|
|
|
This fixes get_ram_size() problems on MPC5200 Rev. B boards.
|
|
|
|
commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Fri Nov 3 19:15:00 2006 -0600
|
|
|
|
mpc83xx: Update 83xx to use fsl_i2c.c
|
|
|
|
Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete
|
|
cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files.
|
|
Added multiple I2C bus support to fsl_i2c.c.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit d239d74b1c937984bc519083a8e7de373a390f06
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Fri Nov 3 12:00:28 2006 -0600
|
|
|
|
mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR
|
|
|
|
Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx
|
|
tree matches the other 8xxx trees.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit f7fb2e703ec9688541416962724adff70a7322cb
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Thu Nov 2 19:47:11 2006 -0600
|
|
|
|
mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c
|
|
|
|
commit 90f30a710a3c619b5405860a686c4ddfc495d4b6
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Thu Nov 2 18:05:50 2006 -0600
|
|
|
|
mpc83xx: Fix the incorrect dcbz operation
|
|
|
|
The 834x rev1.x silicon has one CPU5 errata.
|
|
|
|
The issue is when the data cache locked with
|
|
HID0[DLOCK], the dcbz instruction looks like no-op inst.
|
|
|
|
The right behavior of the data cache is when the data cache
|
|
Locked with HID0[DLOCK], the dcbz instruction allocates
|
|
new tags in cache.
|
|
|
|
The 834x rev3.0 and later and 8360 have not this bug inside.
|
|
|
|
So, when 834x rev3.0/8360 are working with ECC, the dcbz
|
|
instruction will corrupt the stack in cache, the processor will
|
|
checkstop reset.
|
|
|
|
However, the 834x rev1.x can work with ECC with these code,
|
|
because the sillicon has this cache bug. The dcbz will not
|
|
corrupt the stack in cache.
|
|
Really, it is the fault code running on fault sillicon.
|
|
|
|
This patch fix the incorrect dcbz operation. Instead of
|
|
CPU FP writing to initialise the ECC.
|
|
|
|
CHANGELOG:
|
|
* Fix the incorrect dcbz operation instead of CPU FP
|
|
writing to initialise the ECC memory. Otherwise, it
|
|
will corrupt the stack in cache, The processor will checkstop
|
|
reset.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Nov 1 00:10:40 2006 -0600
|
|
|
|
mpc83xx: add OF_FLAT_TREE bits to 83xx boards
|
|
|
|
add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and
|
|
STDOUT_PATH configuration bits to mpc8349emds,
|
|
mpc8349itx, and mpc8360emds board code.
|
|
|
|
redo environment to use bootm with the fdtaddr
|
|
for booting ARCH=powerpc kernels by default,
|
|
and provide default fdtaddr values.
|
|
|
|
commit 48041365b3420589ad464ebc7752e0053538b729
|
|
Author: Kim Phillips <kim.phillips@freescale.com>
|
|
Date: Wed Nov 1 00:07:25 2006 -0600
|
|
|
|
mpc83xx: change ft code to modify local-mac-address property
|
|
|
|
Update 83xx OF code to update local-mac-address properties
|
|
for ethernet instead of the obsolete 'address' property.
|
|
|
|
commit 9ca880a250870a7d55754291b5591d2b5fe89b54
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 21:23:16 2006 -0600
|
|
|
|
mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS
|
|
|
|
This patch also adds an improved I2C set_speed(), which handles all clock
|
|
frequencies.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit ac4b5622ce050b5ee1e154b98df630d778661632
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Tue Oct 31 19:54:59 2006 -0600
|
|
|
|
mpc83xx: add the README.mpc8360emds
|
|
|
|
add doc/README.mpc8360emds to accompany the new board support
|
|
|
|
commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Fri Nov 3 12:11:15 2006 -0600
|
|
|
|
mpc83xx: add QE ethernet support
|
|
|
|
this patch adds support for the QUICC Engine based UCC gigabit ethernet device.
|
|
|
|
commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Fri Nov 3 19:33:44 2006 -0600
|
|
|
|
mpc83xx: Add MPC8360EMDS basic board support
|
|
|
|
Add support for the Freescale MPC8360EMDS board.
|
|
Includes DDR, DUART, Local Bus, PCI.
|
|
|
|
commit 23892e49352de74f7fac36ff90bb1be143d195e3
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Tue Oct 31 19:30:40 2006 -0600
|
|
|
|
mpc83xx: add the QUICC Engine (QE) immap file
|
|
|
|
common QE immap file. Also required for 8360.
|
|
|
|
commit b701652a4992bdcc62fb1a6038a85beef9e55da4
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Tue Oct 31 19:25:38 2006 -0600
|
|
|
|
mpc83xx: Add 8360 specifics to 83xx immap
|
|
|
|
Mainly add QE device dependencies, with appropriate 8360 protection.
|
|
Lindent also run.
|
|
|
|
commit 988833324a7fda482c8ac3ca23eb539f8232e404
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 19:14:41 2006 -0600
|
|
|
|
mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX
|
|
|
|
PREREQUISITE PATCHES:
|
|
|
|
* This patch can only be applied after the following patches have been applied:
|
|
|
|
1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2"
|
|
2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2"
|
|
|
|
CHANGELOG:
|
|
|
|
* For the 8349E-mITX, fix some size values in pci_init_board(), enable
|
|
the clock for the 2nd USB board (Linux kernel will hang otherwise),
|
|
and fix the CONFIG_BOOTARGS macro.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 18:44:42 2006 -0600
|
|
|
|
mpc83xx: Add support for the MPC8349E-mITX
|
|
|
|
PREREQUISITE PATCHES:
|
|
|
|
* This patch can only be applied after the following patches have been applied:
|
|
|
|
1) DNX#2006090742000024 "Add support for multiple I2C buses"
|
|
2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
|
|
3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
|
|
4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
|
|
5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"
|
|
|
|
CHANGELOG:
|
|
|
|
* Add support for the Freescale MPC8349E-mITX reference design platform.
|
|
The second TSEC (Vitesse 7385 switch) is not supported at this time.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 183da6d9b446cc12123455844ad1187e2375626f
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Tue Sep 12 10:15:53 2006 -0400
|
|
|
|
Additional MPC8349 support for multibus i2c
|
|
|
|
Hello,
|
|
|
|
Here is a patch for a file that was accidentally left out of a previous
|
|
attempt.
|
|
|
|
It accompanies the patch with ticket DNX#2006090742000024
|
|
|
|
CHANGELOG:
|
|
Change PCI initialization to use new multi-bus I2C API.
|
|
|
|
regards,
|
|
Ben
|
|
|
|
commit b24f119d672b709d153ff2ac091d4aa63ec6877d
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Sep 7 16:51:04 2006 -0400
|
|
|
|
Multi-bus I2C implementation of MPC834x
|
|
|
|
Hello,
|
|
|
|
Attached is a patch implementing multiple I2C buses on the MPC834x CPU
|
|
family and the MPC8349EMDS board in particular.
|
|
This patch requires Patch 1 (Add support for multiple I2C buses).
|
|
Testing was performed on a 533MHz board.
|
|
|
|
/*** Note: This patch replaces ticket DNX#2006083042000027 ***/
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
CHANGELOG:
|
|
Implemented driver-level code to support two I2C buses on the
|
|
MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds
|
|
are 50kHz, 100kHz and 400kHz on each bus.
|
|
|
|
regards,
|
|
Ben
|
|
|
|
commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Sep 7 16:50:54 2006 -0400
|
|
|
|
Add support for multiple I2C buses
|
|
|
|
Hello,
|
|
|
|
Attached is a patch providing support for multiple I2C buses at the
|
|
command level. The second part of the patch includes an implementation
|
|
for the MPC834x CPU and MPC8349EMDS board.
|
|
|
|
/*** Note: This patch replaces ticket DNX#2006083042000018 ***/
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
Overview:
|
|
|
|
1. Include new 'i2c' command (based on USB implementation) using
|
|
CONFIG_I2C_CMD_TREE.
|
|
|
|
2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that
|
|
the commands to change bus number and speed are only available under the
|
|
new 'i2c' command mentioned in the first bullet.
|
|
|
|
3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
|
|
systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form
|
|
of an array of bus-device pairs. Otherwise, it is an array of uchar.
|
|
|
|
CHANGELOG:
|
|
Added new 'i2c' master command for all I2C interaction. This is
|
|
conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for
|
|
setting I2C bus speed as well as changing the active bus if the board
|
|
has more than one (conditionally compiled with
|
|
CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses.
|
|
Updated README.
|
|
|
|
regards,
|
|
Ben
|
|
|
|
commit bed85caf872714ebf53013967a695c9d63acfc68
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Oct 31 18:13:36 2006 -0600
|
|
|
|
mpc83xx: Add support for Errata DDR6 on MPC 834x systems
|
|
|
|
CHANGELOG:
|
|
|
|
* Errata DDR6, which affects all current MPC 834x processors, lists changes
|
|
required to maintain compatibility with various types of DDR memory. This
|
|
patch implements those changes.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit afd6e470f639883002c7c59d562690a5cb0f4865
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Wed Oct 25 18:45:23 2006 -0500
|
|
|
|
mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it
|
|
|
|
commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a
|
|
Author: Timur Tabi <timur@freescale.com>
|
|
Date: Tue Aug 22 17:07:00 2006 -0500
|
|
|
|
mpc83xx: Add support for variable flash memory sizes on 83xx systems
|
|
|
|
CHANGELOG:
|
|
|
|
* On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access
|
|
window registers, instead of using a hard-coded value of 8MB.
|
|
|
|
Signed-off-by: Timur Tabi <timur@freescale.com>
|
|
|
|
commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965
|
|
Author: Tanya Jiang <tanya.jiang@freescale.com>
|
|
Date: Thu Aug 3 18:38:13 2006 +0800
|
|
|
|
mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros
|
|
|
|
Unified TQM834x variable names with 83xx and consolidated macro
|
|
in preparation for the 8360 and other upcoming 83xx devices.
|
|
|
|
Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
|
|
|
|
commit f6eda7f80ccc13d658020268c507d7173cf2e8aa
|
|
Author: Dave Liu <daveliu@freescale.com>
|
|
Date: Wed Oct 25 14:41:21 2006 -0500
|
|
|
|
mpc83xx: Changed to unified mpx83xx names and added common 83xx changes
|
|
|
|
Incorporated the common unified variable names and the changes in preparation
|
|
for releasing mpc8360 patches.
|
|
|
|
Signed-off-by: Dave Liu <daveliu@freescale.com>
|
|
|
|
commit 3894c46c27c64891f93ac04edde86a9fa9758d92
|
|
Author: Tanya Jiang <tanya.jiang@freescale.com>
|
|
Date: Thu Aug 3 18:36:02 2006 +0800
|
|
|
|
mpc83xx: Fix missing build for mpc8349emds pci.c
|
|
|
|
Make pci build for mpc8349emds
|
|
|
|
Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
|
|
|
|
commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219
|
|
Author: Tanya Jiang <tanya.jiang@freescale.com>
|
|
Date: Thu Aug 3 18:39:49 2006 +0800
|
|
|
|
mpc83xx: Removed unused file resetvec.S for mpc83xx cpu
|
|
|
|
Removed unused file resetvec.S for mpc83xx cpu
|
|
|
|
Signed-off-by: Tanya Jiang <tanya.jiang@freescale.com>
|
|
|
|
commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf
|
|
Author: Nick Spence <Nick.Spence@freescale.com>
|
|
Date: Sat Sep 30 00:32:59 2006 -0700
|
|
|
|
NAND Flash verify across block boundaries
|
|
|
|
This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is
|
|
defined
|
|
and the write crosses a block boundary. The pointer to the verification
|
|
buffer (bufstart) is not being updated to reflect the starting of the
|
|
new
|
|
block so the verification of the second block fails.
|
|
|
|
CHANGELOG:
|
|
|
|
* Fix NAND FLASH page verification across block boundaries
|
|
|
|
commit f484dc791a3932537213c43c654cc1295c64b84c
|
|
Author: Nick Spence <nick.spence@freescale.com>
|
|
Date: Thu Sep 7 07:39:46 2006 -0700
|
|
|
|
Added RGMII support to the TSECs and Marvell 881111 Phy
|
|
|
|
Added a phy initialization to adjust the RGMII RX and TX timing
|
|
Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode
|
|
|
|
Signed-off-by: Nick Spence <nick.spence@freescale.com>
|
|
|
|
commit 4831c8b8a97799da77923d6bbb4c260c0d45521c
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Fri Nov 3 13:10:00 2006 +0800
|
|
|
|
Remove some unused CFG define.
|
|
undef CFG_DRAM_TEST
|
|
|
|
commit 99c09c4dec34f77c243bf51bea532e3f339410ad
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Fri Nov 3 13:07:36 2006 +0800
|
|
|
|
Change the TEXT_BASE from 0xFFF00000 to 0xFF000000.
|
|
Both work. 0xFF000000 seems more reasonable.
|
|
|
|
commit c59200443072353044aa4bf737a5a60f9a9af231
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Nov 2 15:15:01 2006 +0100
|
|
|
|
Release U-Boot 1.1.6
|
|
|
|
commit c1fbe4103a0d6c8957f912af902d705ba67836f2
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 19:14:48 2006 +0800
|
|
|
|
This patch comes from Yuli's posted patch on 8/8/2006
|
|
titled "CFI Driver Little-Endian write Issue".
|
|
|
|
http://sourceforge.net/mailarchive/message.php?msg_id=36311999
|
|
|
|
If that patch applied, please discard this one.
|
|
Until now , I do not see his patch is applied. So please apply this one.
|
|
|
|
Signed-off-by: Yuli Barcohen <yuli@arabellasw.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit b825f158e449e1e9cf74c08e572955e122394c96
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 19:12:31 2006 +0800
|
|
|
|
Tsi108 on chip i2c support.
|
|
|
|
The i2c Interface provides a master-only, serial interface that can be
|
|
used for initializing Tsi108/Tsi109 registers from an EEPROM after a
|
|
device reset.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 9226e7d6f09b9a1ac074cd918c81225a4689bba8
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 19:11:06 2006 +0800
|
|
|
|
Tsi108 on chip pci controller support.
|
|
|
|
If there is no pci card, the tsi108/109 pci configure read will
|
|
cause a machine check exception to the processor. PCI error should
|
|
also be cleared after the read.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit d1927cee977126e547ceeba23e4f978f377cfb8f
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 19:08:55 2006 +0800
|
|
|
|
Tundra tsi108 on chip Ethernet controller support.
|
|
|
|
The following is a brief description of the Ethernet controller:
|
|
The Tsi108/9 Ethernet Controller connects Switch Fabric to two independent
|
|
Gigabit Ethernet ports,E0 and E1. It uses a single Management interface
|
|
to manage the two physical connection devices (PHYs). Each Ethernet port
|
|
has its own statistics monitor that tracks and reports key interface
|
|
statistics. Each port supports a 256-entry hash table for address
|
|
filtering. In addition, each port is bridged to the Switch Fabric
|
|
through a 2-Kbyte transmit FIFO and a 4-Kbyte Receive FIFO.
|
|
|
|
Each Ethernet port also has a pair of internal Ethernet DMA channels to
|
|
support the transmit and receive data flows. The Ethernet DMA channels
|
|
use descriptors set up in memory, the memory map of the device, and
|
|
access via the Switch Fabric. The Ethernet Controller?s DMA arbiter
|
|
handles arbitration for the Switch Fabric. The Controller also
|
|
has a register businterface for register accesses and status monitor
|
|
control.
|
|
|
|
The PMD (Physical Media Device) interface operates in MII, GMII, or TBI
|
|
modes. The MII mode is used for connecting with 10 or 100 Mbit/s PMDs.
|
|
The GMII and TBI modes are used to connect with Gigabit PMDs. Internal
|
|
data flows to and from the Ethernet Controller through the Switch Fabric.
|
|
|
|
Each Ethernet port uses its transmit and receive DMA channels to manage
|
|
data flows through buffer descriptors that are predefined by the
|
|
system (the descriptors can exist anywhere in the system memory map).
|
|
These descriptors are data structures that point to buffers filled
|
|
with data ready to transmit over Ethernet, or they point to empty
|
|
buffers ready to receive data from Ethernet.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 78aa0c3427f3ecdeb34aabfbbe2dd23b6ad8f40e
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 19:01:33 2006 +0800
|
|
|
|
Tundra tsi108 header file.
|
|
|
|
The Tundra Semiconductor Corporation (Tundra) Tsi108 is a host bridge for
|
|
PowerPC processors that offers numerous system interconnect options for
|
|
embedded application designers. The Tsi108 can interconnect 60x or
|
|
MPX processors to PCI/X peripherals, DDR2-400 memory, Gigabit Ethernet,
|
|
and Flash. Provided the macro define for tsi108 chip.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 87c4db09699c6b89176b31004afcb83eb1585d47
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 18:59:15 2006 +0800
|
|
|
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
|
mpc7448hpc2 board support high level code:tsi108 init + mpc7448hpc2.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 27801b8ab11c61b577e45742a515bb3b23b80241
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 18:57:21 2006 +0800
|
|
|
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
|
Make ,config.mk and link file for the mpc7448hpc2 board.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit c6411c0c3bbc79f9ba8aef58296a42d8f9d8a0a6
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 18:55:04 2006 +0800
|
|
|
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
|
The mpc7448hpc2 board support header file.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 625bb5ddb50b243f931262ca8c46956409471917
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 18:52:21 2006 +0800
|
|
|
|
Add mpc7448hpc2 (mpc7448 + tsi108) board associated code support.
|
|
The mpc7448hpc2 board support low level assemble language init code.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 4c52783b3d024e153c4972b97332e314bc3bdc46
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 18:49:51 2006 +0800
|
|
|
|
General code modification for mpc7448hpc2 board support.
|
|
1. Add 7447A and 7448 processor support.
|
|
2. Add the following flags.
|
|
|
|
CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically
|
|
(such as by switch on board), this flag should be set.
|
|
|
|
CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot
|
|
relocates to RAM, this flag should be set.
|
|
|
|
CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the
|
|
system hang in exception, this flag should be set.
|
|
|
|
There is a design issue for tsi108/109 pci configure read. When pci scan
|
|
the slots, if there is no pci card, the tsi108/9 will cause a machine
|
|
check exception for mpc7448 processor.
|
|
|
|
Signed-off-by: Alexandre Bounine <alexandreb@tundra.com>
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 69366bf42f22d67efce8da3f8c40a43d4a3c2695
|
|
Author: roy zang <tie-fei.zang@freescale.com>
|
|
Date: Thu Nov 2 18:34:47 2006 +0800
|
|
|
|
Add README file for mpc7448hpc2 board.
|
|
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
|
|
|
|
commit 25721b5cec2be4bce79cfade17ec8f6aa1e67526
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 02:04:38 2006 +0100
|
|
|
|
Finish up support for MarelV38B board
|
|
- add watchdog support
|
|
- enable GPIO_WKUP_7 pin for input
|
|
- code cleanup
|
|
|
|
commit ffa150bc90c943ca265170bd1be3f293674dd5c7
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 01:45:46 2006 +0100
|
|
|
|
- Fix issues related to the use of ELDK 4 when compiling for MarelV38B:
|
|
* remove warnings when compiling ethaddr.c
|
|
* adjust linker script (fixes a crash resulting from incorrect
|
|
definition of __u_boot_cmd_start)
|
|
- Some MarelV38B code cleanup.
|
|
|
|
commit dae80f3caf9754a6dd3ddf3cf903d0c46cbd4385
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 01:38:16 2006 +0100
|
|
|
|
- Add MPC5XXX register definition MPC5XXX_WU_GPIO_DATA_I and change the
|
|
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's
|
|
Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with
|
|
MPC5XXX_WU_GPIO_DATA_O for affected boards.
|
|
|
|
- Add defintions for some MPC5XXX GPIO pins.
|
|
|
|
commit 82d9c9ec29a1bec1b03ba616425ebaed231072c8
|
|
Author: Bartlomiej Sieka <tur@semihalf.com>
|
|
Date: Wed Nov 1 01:34:29 2006 +0100
|
|
|
|
Changed MarelV38B board make target to lowercase. Config file cleanup.
|
|
|
|
commit 1954be6e9c9421b45d0a9d05b10356acc7563150
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sun Oct 29 01:03:51 2006 +0200
|
|
|
|
Automatically adjust ARFLAGS so "make -s" is really silent.
|
|
|
|
commit fae684e89844856383bdf101440889557df3e6b1
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 28 16:45:00 2006 +0200
|
|
|
|
[PATCH] omap925.c: Remove unused functions
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 28 17:12:58 2006 +0200
|
|
|
|
[PATCH] Add some missing machtypes for netstar & voiceblue boards
|
|
|
|
Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of
|
|
numbers in code.
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 856f054410cef52d868feb330168b2a4c4091328
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 28 15:55:52 2006 +0200
|
|
|
|
[PATCH] NAND: Partition name support added to NAND subsystem
|
|
|
|
chpart, nboot and NAND subsystem related commands now accept also partition
|
|
name to specify offset.
|
|
|
|
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
|
|
Signed-off-by: Stefan Roese <sr@denx.de>
|
|
|
|
commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 02:29:44 2006 +0200
|
|
|
|
Update CHANGELOG.
|
|
|
|
commit 2751a95abd1b96911081c357e96a12fa97b40dee
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 02:29:14 2006 +0200
|
|
|
|
Enable commandline editing and hush shell on all TQM boards.
|
|
|
|
commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 02:28:02 2006 +0200
|
|
|
|
README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
|
|
|
|
commit 471a7be7a042e95e440f5de969c9765214ae8d6e
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Sat Oct 28 01:14:32 2006 +0200
|
|
|
|
Check for illegal character '=' in environment variable names.
|
|
|
|
Make sure the string passed as variable name does not contain a '='
|
|
character. This not only prevents the common error or typing
|
|
"setenv foo=bar" instead of "setenv foo bar", but (more importantly)
|
|
also closes a backdoor which allowed to delete write-protected
|
|
environment variables, for example by using "setenv ethaddr=".
|
|
|
|
commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Sat Oct 28 00:38:39 2006 +0200
|
|
|
|
Minor code cleanup.
|
|
|
|
commit e11887a77d81077416a2d1c5e0354916fee8c034
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Thu Oct 26 17:55:31 2006 +0200
|
|
|
|
Don't pass any debug options directly to the assembler
|
|
|
|
When passing the -g option to gcc, gcc automatically selects a
|
|
suitable --g<format> option to pass on to the assembler.
|
|
Thus, there's no point in forcing a specific debug option on the
|
|
assembler using the -Wa mechanism.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 27 07:47:22 2006 -0500
|
|
|
|
MPC86xx: Cleaned up unused and conditionally used local variables.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Fri Oct 27 11:55:21 2006 +0200
|
|
|
|
Fix "ar" flags in some Makefiles to allow for silent "make -s"
|
|
|
|
commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Oct 26 14:38:25 2006 -0400
|
|
|
|
Fix TSEC driver (now for real): avoid crashes if PHY is not attached
|
|
to a TSEC (e.g. a switch is connected via RMII) or
|
|
if the PHY is defective/incorrectly configured.
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999
|
|
Author: Ben Warren <bwarren@qstreams.com>
|
|
Date: Thu Oct 26 14:38:25 2006 -0400
|
|
|
|
Fix TSEC driver: avoid crashes if PHY is not attached
|
|
to a TSEC (e.g. a switch is connected via RMII) or
|
|
if the PHY is defective/incorrectly configured.
|
|
|
|
Signed-off-by: Ben Warren <bwarren@qstreams.com>
|
|
|
|
commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Thu Oct 26 16:24:31 2006 +0200
|
|
|
|
Code cleanup.
|
|
|
|
commit 5e3b0bc19f07ed277d85324ad0427642c8981baf
|
|
Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
Date: Wed Oct 25 15:48:59 2006 +0200
|
|
|
|
Finish up support for the ATSTK1000/ATSTK1002 boards
|
|
|
|
Add atstk1002_config target to Makefile and move the AVR32 section
|
|
down below Blackfin so that it doesn't end up in the middle of
|
|
MIPS.
|
|
|
|
Drop the autogenerated linker script thing for now. Will have to
|
|
revisit how to handle chips with different flash and RAM layout
|
|
later.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4
|
|
Author: Kumar Gala <galak@kernel.crashing.org>
|
|
Date: Tue Oct 24 23:47:37 2006 -0500
|
|
|
|
Added support for Multi-Image files that contain a device tree
|
|
|
|
If a Multi-Image file contains a third image we try to use it as a
|
|
device tree. The device tree image is assumed to be uncompressed in the
|
|
image file. We automatically allocate space for the device tree in memory
|
|
and provide an 8k pad to allow more than a reasonable amount of growth.
|
|
|
|
Additionally, a device tree that was contained in flash will now automatically
|
|
get copied to system memory as part of boot. Previously an error was
|
|
reported if one tried to boot a device tree that was in flash.
|
|
|
|
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
|
|
commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512
|
|
Author: Wolfgang Denk <wd@denx.de>
|
|
Date: Tue Oct 24 21:35:55 2006 +0200
|
|
|
|
Switch to automatically generated CHANGELOG file.
|
|
(use "make CHANGELOG" to update it from time to time)
|
|
|
|
commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Oct 24 18:06:48 2006 +0200
|
|
|
|
Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c
|
|
Patch by Stefan Roese, 24 Oct 2006
|
|
|
|
commit 8ae3b713b2286e0c3213b7802062e4c1599010de
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 17:24:55 2006 +0200
|
|
|
|
Merge with /home/wd/git/u-boot/master
|
|
|
|
commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 15:32:57 2006 +0200
|
|
|
|
Code cleanup
|
|
|
|
commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:51:36 2006 +0200
|
|
|
|
Move atstk1000 files into vendor specific directory.
|
|
Patch by Haavard Skinnemoen, 12 Sep 2006
|
|
|
|
commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:42:37 2006 +0200
|
|
|
|
Add ATSTK1000 and ATSTK1002 board support
|
|
Patch by Haavard Skinnemoen, 06 Sep 2006
|
|
|
|
This patch adds support for the ATSTK1000 with the ATSTK1002 CPU
|
|
daughterboard.
|
|
|
|
ATSTK1000 is a full-featured development board for AT32AP CPUs. It
|
|
has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker,
|
|
and connectors for USART, PS/2, VGA, USB, MMC/SD cards and
|
|
CompactFlash cards. For more information, please see this page:
|
|
|
|
http://www.atmel.com/dyn/products/tools.asp?family_id=682
|
|
|
|
The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the
|
|
AT32AP7000 chip.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit f93ae788c3640fcde5db383471d45548ff4060d0
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:31:24 2006 +0200
|
|
|
|
Add common serial driver for Atmel AT32 and AT91 chips
|
|
Patch by Haavard Skinnemoen, 06 Sep 2006
|
|
|
|
This is a first attempt at creating a common serial driver for Atmel
|
|
chips. For now, it supports the AT32AP7000 AVR32 chip, but it should
|
|
be possible to support AT91RM9200 and other ARM-based chips with some
|
|
minor modifications.
|
|
|
|
There's nothing fundamentally AVR32-specific in this driver, but it
|
|
does use some features which are currently only defined for the
|
|
AT32AP CPU port:
|
|
* pm_get_clock_freq: Obtain the clock frequency of a given domain
|
|
* gd->console_uart: A "struct device" containing information about
|
|
register mappings, gpio resources and clocks associated with the
|
|
UART device.
|
|
|
|
For more information about these features, please see the "AT32AP
|
|
CPU" patch.
|
|
|
|
commit 72a087e04705c26cad982879ebd06b5281bf825a
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:27:35 2006 +0200
|
|
|
|
Add AT32AP CPU and AT32AP7000 SoC support
|
|
Patch by Haavard Skinnemoen, 06 Sep 2006
|
|
|
|
This patch adds support for the AT32AP CPU family and the AT32AP7000
|
|
chip, which is the first chip implementing the AVR32 architecture.
|
|
|
|
The AT32AP CPU core is a high-performance implementation featuring a
|
|
7-stage pipeline, separate instruction- and data caches, and a MMU.
|
|
For more information, please see the "AVR32 AP Technical Reference":
|
|
|
|
http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf
|
|
|
|
In addition to this, the AT32AP7000 chip comes with a large set of
|
|
integrated peripherals, many of which are shared with the AT91 series
|
|
of ARM-based microcontrollers from Atmel. Full data sheet is
|
|
available here:
|
|
|
|
http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 7b64fef33c66be648826c0ff9758298ef13d0604
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 14:21:16 2006 +0200
|
|
|
|
Add AVR32 architecture support
|
|
Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200
|
|
|
|
This patch adds common infrastructure code for the Atmel AVR32
|
|
architecture. See doc/README.AVR32 for details.
|
|
|
|
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
|
|
|
|
commit 2da2d9a4766063b9848f3a35ad6025499cf87265
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 13:57:33 2006 +0200
|
|
|
|
Use -g instead of -gstabs in AFLAGS_DEBUG
|
|
Patch by Haavard Skinnemoen, 30 Aug 2006
|
|
|
|
In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no
|
|
matter what the target's preferred debugging format is. This patch
|
|
simply replaces -gstabs with -g, so that the default debugging format
|
|
for the architecture is used.
|
|
|
|
commit 965829872169c2996023840d98e1d85ad148d629
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Tue Oct 24 13:55:18 2006 +0200
|
|
|
|
Fix/workaround broken dependency handling with make 3.81
|
|
Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200
|
|
|
|
commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a
|
|
Author: Marian Balakowicz <m8@semihalf.com>
|
|
Date: Mon Oct 23 22:17:05 2006 +0200
|
|
|
|
Fix sequoia separate object direcory building problems.
|
|
|
|
commit 3dfa9cfdcee78b30da3432318b32821ffabe974b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 20 17:16:35 2006 -0500
|
|
|
|
Use generic I2C register block on 85xx and 86xx.
|
|
|
|
Replace private IMMAP I2C structures with generic reg block
|
|
and allow 86xx to have multiple I2C device busses.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 20 15:54:34 2006 -0500
|
|
|
|
Fix compilation warnings on a few 85xx boards.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 2047672684cf85cb6f96a1fbc993180aaaf19a99
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 20 15:50:15 2006 -0500
|
|
|
|
Converted all 85xx boards to use a common FSL I2C driver.
|
|
Introduced COFIG_FSL_I2C to select the common FSL I2C driver.
|
|
And removed hard i2c path from a few u-boot.lds scipts too.
|
|
Minor whitespace cleanups along the way.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4d45f69e362b05892c9e92a7907e5820995612aa
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 19 12:02:24 2006 -0500
|
|
|
|
Rewrite a series of goto statements as a sequences of
|
|
conditional expressions instead.
|
|
|
|
Use consistent return code 0/-1 for good/bad indicators.
|
|
|
|
Include one fewer file if the driver isn't used at all.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 7237c033b02fe295880435f1eb80819a0c987532
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 19 11:02:16 2006 -0500
|
|
|
|
Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c
|
|
|
|
in an effort to begin to unify the umpteen FSL I2C drivers that
|
|
are all otherwise very similar.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 19 11:33:52 2006 -0500
|
|
|
|
* Fix a bunch of compiler warnings for gcc 4.0
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Oct 17 06:14:31 2006 +0200
|
|
|
|
Add monitor functions for indirect access to PPC440 DCR's
|
|
Patch by Leonid Baryudin, 12 Oct 2006
|
|
|
|
commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Fri Oct 13 16:47:53 2006 -0500
|
|
|
|
Fixed leading whitespace issues.
|
|
Removed spurious LAWAR thing.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Oct 12 10:42:36 2006 -0500
|
|
|
|
Remove unneeded include files and local variable.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5
|
|
Author: Grant Likely <grant.likely@secretlab.ca>
|
|
Date: Tue Oct 10 00:23:32 2006 -0600
|
|
|
|
Fix possible uninitialized variable compiler warning.
|
|
|
|
When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in
|
|
do_bootm_linux() may be uninitialized. There is no possibility in the
|
|
current code that len will get used uninitialized, but this fix follows
|
|
the existing convention of setting both len and data to zero at the same
|
|
time.
|
|
|
|
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
|
|
commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Oct 11 15:13:01 2006 -0500
|
|
|
|
* Fix a bunch of compiler warnings for gcc 4.0
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit bf651baa365e5447246aad6a633ccd667cf24a39
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Oct 11 10:10:43 2006 -0500
|
|
|
|
Move "ar" flags to config.mk to allow for silent "make -s"
|
|
|
|
commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:19:03 2006 -0500
|
|
|
|
Coding style changes to remove local varible blocks
|
|
and reformat a bit nicer.
|
|
|
|
commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:16:04 2006 -0500
|
|
|
|
Fix whitespace issues.
|
|
|
|
commit 7b382b7125f2397cce63253df62f183e3dfa2770
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:14:45 2006 -0500
|
|
|
|
Fix whitespace issues.
|
|
|
|
commit e10390ddd736b0dad1528eec4b0fe35c0827139a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:06:53 2006 -0500
|
|
|
|
Fix whitespace issues.
|
|
|
|
commit 89875e96ba3f023157bf50d5f8e33bf254964a76
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:03:43 2006 -0500
|
|
|
|
Ran lindent and cleaned up whitespace issues.
|
|
Format for 80-columns too.
|
|
|
|
commit 333961ae7095fc66d8a041fce1ac9ee873b09d86
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Oct 10 17:02:22 2006 -0500
|
|
|
|
Fix whitespace and 80-col issues.
|
|
|
|
commit 5c912cb1c31266c66ca59b36f9b6f87296421d75
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:36:51 2006 +0200
|
|
|
|
CFG_NAND_QUIET_TEST added to not warn upon missing NAND device
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit 5bc528fa4da751d472397b308137238a6465afd2
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:35:25 2006 +0200
|
|
|
|
Update ALPR code (NAND support working now)
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit 77d5034847d328753b80c46b83f960a14a26f40e
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:33:03 2006 +0200
|
|
|
|
Remove compile warnings in fpga code
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit f3443867e90d2979a7dd1c65b0d537777e1f9850
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Sat Oct 7 11:30:52 2006 +0200
|
|
|
|
Add CONFIG_BOARD_RESET to configure board specific reset function
|
|
Patch by Stefan Roese, 07 Oct 2006
|
|
|
|
commit f55df18187e7a45cb73fec4370d12135e6691ae1
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Fri Sep 29 08:23:12 2006 +0100
|
|
|
|
Fix missing tCycle/modfreq calculation.
|
|
|
|
Signed-off-by: John Traill <john.traill@freescale.com>
|
|
|
|
commit 8272dc2f58f2473d8995fcc9b916440cfba080f0
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Sep 13 10:33:35 2006 -0500
|
|
|
|
Updated config headers to add default FDT-based booting
|
|
|
|
commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Sep 13 10:34:18 2006 -0500
|
|
|
|
Add support for eTSEC 3 & 4 on 8548 CDS
|
|
|
|
* Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS.
|
|
This will only work on rev 1.3 boards (but doesn't break older boards)
|
|
* Cleaned up some comments to reflect the expanded role of tsec
|
|
in other systems
|
|
|
|
commit 084d648b109c8984f83674043c1a7fa3885ef801
|
|
Author: Andy Fleming <afleming@freescale.com>
|
|
Date: Wed Sep 13 10:33:56 2006 -0500
|
|
|
|
Added code to support 2.6.18 PCI changes in u-boot
|
|
|
|
* Added code to swizzle the IRQ map for the PCI
|
|
|
|
commit afbdc649f8751e4f4f1a6f527edfe139773f2c15
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Sep 19 09:34:10 2006 -0500
|
|
|
|
Modified makefile for new build mechanism.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit d14ba6a798beb753e7a864500414fcc2d198b8bc
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Sep 14 08:40:36 2006 -0500
|
|
|
|
Handle 86xx SVR values according to the new Reference Manual.
|
|
Both 8641 and 8641D have SVR == 0x8090, and are distinguished
|
|
by the byte in bits 16-23 instead.
|
|
Thanks to Jason Jin for noticing.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Mon Aug 28 14:25:31 2006 +0800
|
|
|
|
Fixed an OF-tree off-by-one bug when adding a new property name.
|
|
This bug will cause the kernel booting to pause a long time.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
(cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit)
|
|
|
|
commit 9bff7a69a885adebbd2bd45990494ec4cf998a30
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 29 11:05:09 2006 -0500
|
|
|
|
Remove trailing empty lines.
|
|
|
|
commit cd6d73d5b895a5935ac4fde0a356288142a584e0
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 29 09:48:49 2006 -0500
|
|
|
|
Remove bogus msync and use volatile asm.
|
|
|
|
commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 29 08:17:14 2006 -0500
|
|
|
|
Add myself as maintainer for MPC8641HPCN.
|
|
|
|
commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Mon Aug 28 14:25:31 2006 +0800
|
|
|
|
Fixed an OF-tree off-by-one bug when adding a new property name.
|
|
This bug will cause the kernel booting to pause a long time.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit 5567806b67d0ae83493aa8823ad3b6c914f581d7
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Aug 25 14:38:34 2006 -0400
|
|
|
|
Change ramdiskaddr and dtbaddr
|
|
Remove PEX fluff commands.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Aug 23 13:32:45 2006 -0500
|
|
|
|
* Another small fix for booting with disable_of
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 23 11:04:43 2006 -0500
|
|
|
|
Cleanup and lindent new AHCI driver.
|
|
|
|
commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de
|
|
Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
|
|
Date: Wed Aug 23 19:15:12 2006 +0800
|
|
|
|
Add AHCI define and sata support for MPC8641HPCN board.
|
|
|
|
Signed-off-by:Jason Jin<jason.jin@freescale.com>
|
|
|
|
commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4
|
|
Author: Jin Zhengxiong <jason@bus.ap.freescale.net>
|
|
Date: Wed Aug 23 19:10:44 2006 +0800
|
|
|
|
Add AHCI support to u-boot
|
|
|
|
Add AHCI support in u-boot, enable the sata disk controllers which
|
|
following the AHCI protocol.
|
|
|
|
Signed-off-by:Jason Jin<jason.jin@freescale.com>
|
|
|
|
commit d8ea2acf5f137cae99417df4f573d036ee384668
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Wed Aug 23 17:54:32 2006 +0800
|
|
|
|
Add dtb boot-up parameter to default boot commands.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit b93775c2036b99baa390ea425c4771895bbc63c4
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 18:26:08 2006 -0500
|
|
|
|
Cleanup even more poorly introduced whitespace.
|
|
|
|
commit ae6241685cbcf0c79a3636530d2ceab1fb291a94
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 18:07:00 2006 -0500
|
|
|
|
Cleanup more poorly introduced whitespace.
|
|
|
|
commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 17:54:05 2006 -0500
|
|
|
|
Cleanup poorly introduced whitespace.
|
|
|
|
commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 12:25:27 2006 -0500
|
|
|
|
General indent and whitespace cleanups.
|
|
|
|
commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 12:06:18 2006 -0500
|
|
|
|
General indent and whitespace cleanups.
|
|
|
|
commit 41a0e8b304d3ff55fe27a230507aac79684016ac
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue Aug 22 10:42:21 2006 -0500
|
|
|
|
Cleanup compiler warnings.
|
|
|
|
commit 5de62c47a8628b3da4d73f7c07027f32a3342d40
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Tue Aug 22 09:31:59 2006 -0500
|
|
|
|
Fix disable_of booting
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 87a449c8ac396420cb24260f717ea9e6faa82047
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Tue Aug 22 09:23:55 2006 -0500
|
|
|
|
Support for FDT in uImage format, error when using FDT from flash
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 75c299c38369d01addd5e054b8a16217b70f4a86
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:12:55 2006 -0400
|
|
|
|
Unlock cache before kernel starts up for MPC86xx
|
|
|
|
commit 67256678f00c09b0a7f19e862e5c1847553d31bc
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:13:15 2006 -0400
|
|
|
|
Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
|
|
|
|
commit 1c8f6d8fb028f156094d05f2d14298e6479364ac
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:12:55 2006 -0400
|
|
|
|
Unlock cache before kernel starts up for MPC86xx
|
|
|
|
commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Aug 15 15:13:15 2006 -0400
|
|
|
|
Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR
|
|
|
|
commit 86c8e17f25e972a7e272950a0735fad84e082b88
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Aug 16 13:59:47 2006 -0500
|
|
|
|
* Fix disable_of booting
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 25c751e9adc86e22fe3b5b47cf2806379b575db7
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Aug 16 10:54:09 2006 -0500
|
|
|
|
* Support for FDT in uImage format, error when using FDT from flash
|
|
|
|
Signed-off-by: Matthew McClintock <msm@freescale.com>
|
|
|
|
commit 899620c2d66d4eef3b2a0034d062e71d45d886c9
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 15 14:22:35 2006 +0200
|
|
|
|
Add initial support for the ALPR board from Prodrive
|
|
NAND needs some additional testing
|
|
Patch by Heiko Schocher, 15 Aug 2006
|
|
|
|
commit f0ff4692ff3372dec55074a8eb444943ab095abb
|
|
Author: Stefan Roese <sr@denx.de>
|
|
Date: Tue Aug 15 14:15:51 2006 +0200
|
|
|
|
Add FPGA Altera Cyclone 2 support
|
|
Patch by Heiko Schocher, 15 Aug 2006
|
|
|
|
commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon Aug 14 15:33:38 2006 -0500
|
|
|
|
Fix BAT0 to actually be cacheable, non-guarded as documented.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 40bc83559db5745681909fd7382ae509567e116d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Aug 9 15:32:16 2006 -0500
|
|
|
|
Removed MPC8641HPCN DTS source file from build.
|
|
It is no longer linked into U-Boot; its sources are
|
|
now located in the kernel tree.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:47:03 2006 -0500
|
|
|
|
* Switched default PCI speed for 8540 ADS back to 33MHz
|
|
|
|
* Added comments and a printf to warn that PCI-X won't
|
|
work at 33MHz
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:35 2006 -0500
|
|
|
|
* Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:13 2006 -0500
|
|
|
|
* Added VIA configuration table
|
|
|
|
* Added support for PCI2 on CDS
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit c88f9fe66b64247e5b6a38410ba315ca25596d16
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:41 2006 -0500
|
|
|
|
* Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 97074ed9655309b64231bc2cee69fe85399f8055
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:17 2006 -0500
|
|
|
|
* Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:49 2006 -0500
|
|
|
|
* Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit a4e11558b810ef2cddffdf7b9d86bc1130441960
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:23 2006 -0500
|
|
|
|
* Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:36 2006 -0500
|
|
|
|
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:00 2006 -0500
|
|
|
|
* Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 5498d90312aad9f6bdbf047986027c35b03cd163
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:42:24 2006 -0500
|
|
|
|
* Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:41:37 2006 -0500
|
|
|
|
* Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Wed Aug 9 14:33:50 2006 +0100
|
|
|
|
Add Rapidio support for the MPC8641HPCN
|
|
|
|
Signed-off-by: John Traill <john.traill@freescale.com>
|
|
|
|
commit 91a414c7d1fb0eac912592cd995b30c9f23045c9
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Tue Aug 8 11:32:43 2006 +0100
|
|
|
|
Fix caslat calculation
|
|
|
|
Signed-off-by: John Traill <john.traill@freescale.com>
|
|
|
|
commit 709d3073e74153278e7904a70819bbef7df50e1a
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Aug 3 16:17:56 2006 -0500
|
|
|
|
Convert to mac-address in ethernet nodes.
|
|
|
|
commit 71748af833ca1017edf1415be376366ff2937d17
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Jul 28 12:41:35 2006 -0400
|
|
|
|
Correct the irq value of DUART2
|
|
|
|
commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Jul 28 12:41:41 2006 -0400
|
|
|
|
Change the space size of PEX IO in README
|
|
|
|
commit 239db37c94f7a92941c4465feceb867c609241c5
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Fri Jul 28 12:41:18 2006 -0400
|
|
|
|
Move get_board_sys_clk to board directory
|
|
|
|
commit 492900b985439fbce1a118afde1e35def870db03
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Fri Jul 28 09:03:54 2006 +0100
|
|
|
|
Fix 8641HPCN pollution
|
|
|
|
commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2
|
|
Author: John Traill <john.traill@freescale.com>
|
|
Date: Fri Jul 28 08:16:06 2006 +0100
|
|
|
|
Fix 8641HPCN timebase
|
|
|
|
commit c86360b830f1eecd7a72208575dde4f57879faea
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Fri Jul 28 00:01:34 2006 +0800
|
|
|
|
Fixed OF device tree of mpc86xxhpcn board.
|
|
|
|
The changes works in with kernel irq mapping rework.
|
|
|
|
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
|
|
|
|
commit bea3f28d285942bf3f7ab339ce85178ded544225
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Wed Jul 12 10:48:05 2006 -0400
|
|
|
|
Add support for reading and writing mac addresses to or from ID EEPROM.
|
|
|
|
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
|
|
With attached patch, we can use command "mac/mac read/mac save/"
|
|
to read and write EEPROM under u-boot prompt.
|
|
|
|
U-boot will calculate the checksum of EEPROM while bootup,
|
|
if it is right, then u-boot will check whether the mac address
|
|
of eTSEC0/1/2/3 is availalbe (non-zero).
|
|
|
|
If there is mac address availabe in EEPROM, u-boot will use it,
|
|
otherewise, u-boot will use the mac address defined in
|
|
MPC8641HPCN.h. This matches the requirement to set unique mac address
|
|
for each TSEC port.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Signed-off-by: York Sun <yorksun@freescale.com>
|
|
|
|
commit fcb28e763415e0e4e66b0f45842d1557ae198e5e
|
|
Author: Jin Zhengxiong <Jason.Jin@freescale.com>
|
|
Date: Thu Jul 13 10:35:10 2006 -0500
|
|
|
|
Fixed initrd issue by define big RAM
|
|
|
|
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit e6cd2a1785d74ec3d30a86f1cb360be8de478151
|
|
Author: Jason Jin <Jason.jin@freescale.com>
|
|
Date: Fri Jul 7 10:01:45 2006 -0500
|
|
|
|
We made a u-boot patch to fix the hang up issue
|
|
when booting filesystem from ramdisk.
|
|
|
|
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 38433ccc5850ee70549af0b2bc5b920355ef5388
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:47:03 2006 -0500
|
|
|
|
* Switched default PCI speed for 8540 ADS back to 33MHz
|
|
* Added comments and a printf to warn that PCI-X won't
|
|
work at 33MHz
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:35 2006 -0500
|
|
|
|
* Fixed a bug where 8555 PCI code used the old variable and
|
|
function names
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:46:13 2006 -0500
|
|
|
|
* Added VIA configuration table
|
|
* Added support for PCI2 on CDS
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:41 2006 -0500
|
|
|
|
* Fixed PCI memory definitions
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 087454609e47295443af793a282cddcd91a5f49c
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:45:17 2006 -0500
|
|
|
|
* Added support for initializing second PCI bus on 85xx
|
|
Patch by Andy Fleming 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit b636aaeb6fd516a442fb611bbeeddf3077a687fb
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:49 2006 -0500
|
|
|
|
* Added PCI-X #defines for PCI-X initialization
|
|
Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 20abbc6fffa115690107cc942c7abf84bdc03a1b
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:44:23 2006 -0500
|
|
|
|
* Made sure the code which disables prefetch for PCI devices
|
|
sets the size of the prefetch region to 0
|
|
Patch by Andy Fleming on 17-Mar-2006
|
|
|
|
Signed-off-by: Andy Fleming <afleming@freescale.com>
|
|
|
|
commit 40d5fa35d02df22580593bf0039ab173367e8ef0
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:36 2006 -0500
|
|
|
|
* Add Flat Dev Tree construction for MPC85xx ADS and CDS boards
|
|
Patch by Jon Loeliger 17-Jan-2006
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit be7e8b0cb5a0c49dc180075b96df296a893bf146
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:43:00 2006 -0500
|
|
|
|
* Removed the oftree.dts for stxxtx in light of the changes
|
|
to the flat device tree handling code
|
|
Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 1b380ec225665e73959677f3893dc658c5925e05
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:42:24 2006 -0500
|
|
|
|
* Patch to modify ft_build.c to update flat device trees in place
|
|
Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit 98a9c4d468a942a09ebe8979bec508017f3e4462
|
|
Author: Matthew McClintock <msm@freescale.com>
|
|
Date: Wed Jun 28 10:41:37 2006 -0500
|
|
|
|
* Modify bootm command to support booting with flat device trees
|
|
Patch by Matthew McClintock 26-June-2006
|
|
|
|
commit da012ab661fd4ab169dd7b9b32201a4df62cf34a
|
|
Author: Jin Zhengxiong <Jason.Jin@freescale.com>
|
|
Date: Wed Jun 28 08:43:56 2006 -0500
|
|
|
|
Change Id to symbolic name for RTL8139
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:12:10 2006 +0800
|
|
|
|
Fix RTL8139 in big endian
|
|
|
|
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
|
|
signed-off-by: Wei Zhang <wei.zhang@freescale.com>
|
|
|
|
commit fcfb9a57947fc203b99fe81ab0578f7286261f9f
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:12:23 2006 +0800
|
|
|
|
Fix Tsec bug when no link
|
|
|
|
When tftp a non-exist file from the tftp server, u-boot will check
|
|
the link of all eth port. The original file will return wrong link
|
|
state on the no link ports.
|
|
|
|
signed-off-by: Jason Jin <Jason.Jin@freescale.com>
|
|
|
|
commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:12:02 2006 +0800
|
|
|
|
Fix bug for io_bar size during pci scan
|
|
|
|
During the pci scan process, Some devices return bar_reponse with the
|
|
highest bytes 0, such as the pci bridge in uli1575 return bar_response
|
|
with 0xffffff, So the bar_size should be manually set under 64K.
|
|
|
|
Signed-off-by: Jason Jin <jason.jin@freescale.com>
|
|
|
|
commit fa7db9c377bc2353a17bf1d381d65a6c418728f0
|
|
Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com>
|
|
Date: Tue Jun 27 18:11:54 2006 +0800
|
|
|
|
Enable PCIE1 for MPC8641HPCN board
|
|
|
|
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
|
|
|
|
commit 99d70e3a47affb9bae041a2caece7cd516e213b3
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Mon Jun 26 11:06:00 2006 +0200
|
|
|
|
More code cleanup
|
|
|
|
commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jun 22 08:51:46 2006 -0500
|
|
|
|
Fix bug in 8641hpcn reset command with no args.
|
|
|
|
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
|
|
Acked-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc
|
|
Author: Zhang Wei <wei.zhang@freescale.com>
|
|
Date: Tue Jun 20 17:47:15 2006 +0800
|
|
|
|
Reworked IRQ mapping in OF-tree.
|
|
|
|
commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Jun 15 21:33:37 2006 -0500
|
|
|
|
Do not enable address translation on secondary CPUs.
|
|
Do not set up BATs on secondary CPUs. Let Linux do the nasty.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 386eda022473394ad8f36b86f2bdc9b4cb816291
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Jun 14 18:14:56 2006 +0200
|
|
|
|
Code cleanup
|
|
|
|
commit 16c8d5e76ae0f78f39a60608574adfe0feb9cc70
|
|
Author: Wolfgang Denk <wd@pollux.denx.de>
|
|
Date: Wed Jun 14 17:45:53 2006 +0200
|
|
|
|
Various USB related patches
|
|
- Add support for mpc8xx USB device.
|
|
- Add support for Common Device Class - Abstract Control Model USB console.
|
|
- Add support for flow control in USB slave devices.
|
|
- Add support for switching between gserial and cdc_acm using environment.
|
|
- Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
|
|
- Update usbcore slightly to ease host enumeration.
|
|
- Fix non-portable endian problems in usbdcore and usbdcore_ep0.
|
|
- Add AdderUSB_config as a defconfig to enable usage of the USB console
|
|
by default with the Adder87x U-Boot port.
|
|
Patches by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
|
|
|
|
commit 8ecc971618f56029ad99d3516f8b297a6ed58971
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 7 10:53:55 2006 -0500
|
|
|
|
Fix a get_board_sys_clk() use-before-def warning.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit d9bf4858fca5aa4d651b283270f77da72ebadfd5
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed Jun 7 10:52:49 2006 -0500
|
|
|
|
Allow DTC path to be passed in.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit c83ae9ea6d93abbe751bf8a3396236a084e56f87
|
|
Author: Haiying Wang <haiying.wang@freescale.com>
|
|
Date: Tue Jun 6 16:54:29 2006 -0400
|
|
|
|
Modify the IRQ of DUART2
|
|
|
|
commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 13:55:35 2006 -0500
|
|
|
|
Review cleanups.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit cb5965fb95b77a49f4e6af95248e0c849f4af03e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 12:44:44 2006 -0500
|
|
|
|
White space cleanup.
|
|
Some 80-column cleanups.
|
|
Convert printf() to puts() where possible.
|
|
Use #include "spd_sdram.h" as needed.
|
|
Enhanced reset command usage message a bit.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 3d5c5be547445dd3bd2eb7368d80df03ea437970
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 11:39:34 2006 -0500
|
|
|
|
Removed unneeded local_bus_init() from 8641HPCN board.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit 4d3d729c16c392d2982d3266b659d333c927697d
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 11:24:28 2006 -0500
|
|
|
|
Moved mpc8641hpcn_board_reset() out of cpu/ into board/.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit b2a941de060350ad15878d8219825f4950e9bb8e
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Wed May 31 10:07:28 2006 -0500
|
|
|
|
Remove dead debug code.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit 126aa70f10ba3d20e0a6f4d32328250513b77770
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue May 30 17:47:00 2006 -0500
|
|
|
|
Move mpc86xx PIXIS code to board directory
|
|
|
|
First cut at moving the PIXIS platform code out of
|
|
the 86xx cpu directory and into board/mpc8641hpcn
|
|
where it belongs.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@freescale.com>
|
|
|
|
commit ddf83a2fcef1a670c45fc585119dcc1fe062c4a9
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue May 30 16:56:14 2006 +0200
|
|
|
|
Support generic OHCI support for the s3c24x0 cpu.
|
|
|
|
commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Tue May 30 09:10:32 2006 -0500
|
|
|
|
Improve "reset" command's interaction with watchdog.
|
|
|
|
"reset altbank" will reset another bank WITHOUT watch dog timer enabled
|
|
"reset altbank wd" will reset another bank WITH watch dog enabled
|
|
"diswd" will disable watch dog after u-boot boots up successfully
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Tue May 30 08:51:19 2006 -0500
|
|
|
|
Fix two SDRAM setup bugs.
|
|
|
|
Fix ECC setup bug.
|
|
Enable 1T/2T based on number of DIMMs present.
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit d11fec5015334deb2010e36ce00bb118cc5429a5
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Fri May 26 10:24:48 2006 -0500
|
|
|
|
Add first draft of the MPC8641HPCN doc/README.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit ed45d6c930b5939718a87ee12e25cf9a05978d4a
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Fri May 26 10:13:04 2006 -0500
|
|
|
|
Added pci@8000 block.
|
|
Updated ethernet interrupt mappings (moved up 48).
|
|
Cleaned up a few comments.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Fri May 26 10:01:16 2006 -0500
|
|
|
|
Allow args on reset command.
|
|
|
|
Signed-off-by: Jon Loeliger <jdl@jdl.com>
|
|
|
|
commit 301f1aa384d0edcae6a22fd9adb933ad71695ecc
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue May 23 13:38:35 2006 +0200
|
|
|
|
Changed the mp2usb (at91rm9200) board to use the generic OHCI driver. Some
|
|
fixes to the latter.
|
|
|
|
commit 24e37645e7378b20fa8f20e2996c8fb8e90c70c9
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Tue May 23 10:33:11 2006 +0200
|
|
|
|
More cleanup for the delta board and the generic usb_ohci driver. Added
|
|
CFG_USB_BOARD_INIT and CFG_USB_CPU_INIT for enabling board and cpu specific
|
|
initialization and cleanup hooks respectively.
|
|
|
|
commit 3e326ece9eba8184f5d48aa4fb87760a8f6f0f10
|
|
Author: Markus Klotzbuecher <mk@denx.de>
|
|
Date: Mon May 22 16:33:54 2006 +0200
|
|
|
|
This patch adds USB storage support for the delta board. This is the first
|
|
board to make use of a generic OHCI driver, that calls hooks for board
|
|
dependant initialization.
|
|
|
|
commit 14e37081ff3cac7ebe6e93836523429853b6b292
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:28:39 2006 -0500
|
|
|
|
Change arbitration to round-robin for SMP linux.
|
|
|
|
commit 9a655876e5995be80f49054e2509500e871e4d3a
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:26:34 2006 -0500
|
|
|
|
Enable dual DDR controllers and interleaving.
|
|
|
|
commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:22:44 2006 -0500
|
|
|
|
Update 86xx address map and LAWBARs.
|
|
|
|
commit cccce5d0581bb0ba4602799a4b5112e58d1579cb
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 13:14:15 2006 -0500
|
|
|
|
Remove L2 Cache invalidate polling.
|
|
|
|
commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8
|
|
Author: Jon Loeliger <jdl@jdl.com>
|
|
Date: Fri May 19 12:33:09 2006 -0500
|
|
|
|
Enable 2nd CPU and I2C.
|
|
|
|
commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Mon May 15 07:26:56 2006 -0500
|
|
|
|
Update interrupt mapping.
|
|
|
|
commit 6cfea33477b04b63ed47386ed1629529484c33ba
|
|
Author: Haiying Wang <Haiying.Wang@freescale.com>
|
|
Date: Wed May 10 09:38:06 2006 -0500
|
|
|
|
Remove unneeded INIT_RAM_LOCK cache twiddling.
|
|
Correctly tracks r29 as global data pointer now.
|
|
|
|
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
|
|
|
|
commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed May 10 09:33:07 2006 -0500
|
|
|
|
Remove unnecessary flash.c file.
|
|
|
|
commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Tue May 9 08:23:49 2006 -0500
|
|
|
|
Get MPC8641HPCN flash images working.
|
|
|
|
Enable the CFI driver.
|
|
Remove bogus LAWBAR7 cruft.
|
|
Use correct TEXT_BASE, Fixup load script.
|
|
Enable SPD EEPROM during DDR setup.
|
|
Use generic RFC 1918 IP addresses by default.
|
|
|
|
commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Apr 27 10:15:16 2006 -0500
|
|
|
|
Cleanup whitespaces and style issues.
|
|
Removed //-style comments.
|
|
Use 80-column lines.
|
|
Remove trailing whitespace.
|
|
Remove dead code and debug cruft.
|
|
|
|
commit a2320a6bf8113a09544c42d160d10ac69d049a03
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Thu Apr 27 08:22:39 2006 -0500
|
|
|
|
Revert bad PCI prefetch limit change.
|
|
|
|
commit debb7354d1ea4f694154818df5e5b523f5c1cc1d
|
|
Author: Jon Loeliger <jdl@freescale.com>
|
|
Date: Wed Apr 26 17:58:56 2006 -0500
|
|
|
|
Initial support for MPC8641 HPCN board.
|