f810ea6acb
Tinker board needs to mux all the sdmmc gpio and activate the regulator connected to bank 7. Remove all the bank that are not in use and mark them as dm,spl so-that it would initialize at SPL. Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
91 lines
2.3 KiB
Plaintext
91 lines
2.3 KiB
Plaintext
CONFIG_ARM=y
|
|
CONFIG_ARCH_ROCKCHIP=y
|
|
CONFIG_SYS_TEXT_BASE=0x01000000
|
|
CONFIG_ROCKCHIP_RK3288=y
|
|
CONFIG_TARGET_TINKER_RK3288=y
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_SPL_STACK_R_ADDR=0x80000
|
|
CONFIG_SPL_SIZE_LIMIT=307200
|
|
CONFIG_DEBUG_UART_BASE=0xff690000
|
|
CONFIG_DEBUG_UART_CLOCK=24000000
|
|
CONFIG_DEBUG_UART=y
|
|
# CONFIG_ANDROID_BOOT_IMAGE is not set
|
|
CONFIG_USE_PREBOOT=y
|
|
CONFIG_SILENT_CONSOLE=y
|
|
CONFIG_CONSOLE_MUX=y
|
|
CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
|
|
# CONFIG_DISPLAY_CPUINFO is not set
|
|
CONFIG_DISPLAY_BOARDINFO_LATE=y
|
|
CONFIG_SPL_STACK_R=y
|
|
CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x2000
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_GPT=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_SF=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_USB_MASS_STORAGE=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_TIME=y
|
|
CONFIG_CMD_PMIC=y
|
|
CONFIG_CMD_REGULATOR=y
|
|
# CONFIG_SPL_DOS_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_SPL_PARTITION_UUIDS=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="rk3288-tinker"
|
|
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
|
|
CONFIG_ENV_IS_IN_MMC=y
|
|
CONFIG_REGMAP=y
|
|
CONFIG_SPL_REGMAP=y
|
|
CONFIG_SYSCON=y
|
|
CONFIG_SPL_SYSCON=y
|
|
# CONFIG_SPL_SIMPLE_BUS is not set
|
|
CONFIG_CLK=y
|
|
CONFIG_SPL_CLK=y
|
|
CONFIG_FASTBOOT_FLASH=y
|
|
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
|
|
CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
|
|
CONFIG_ROCKCHIP_GPIO=y
|
|
CONFIG_SPL_GPIO_SUPPORT=y
|
|
CONFIG_SYS_I2C_ROCKCHIP=y
|
|
CONFIG_SPL_I2C_SUPPORT=y
|
|
CONFIG_SPL_POWER_SUPPORT=y
|
|
CONFIG_MISC=y
|
|
CONFIG_I2C_EEPROM=y
|
|
CONFIG_MMC_DW=y
|
|
CONFIG_MMC_DW_ROCKCHIP=y
|
|
CONFIG_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_SPEED=20000000
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_ETH_DESIGNWARE=y
|
|
CONFIG_GMAC_ROCKCHIP=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_SPL_PINCTRL=y
|
|
CONFIG_DM_PMIC=y
|
|
CONFIG_PMIC_RK8XX=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_SPL_DM_REGULATOR=y
|
|
CONFIG_REGULATOR_RK8XX=y
|
|
CONFIG_SPL_DM_REGULATOR_FIXED=y
|
|
CONFIG_PWM_ROCKCHIP=y
|
|
CONFIG_RAM=y
|
|
CONFIG_SPL_RAM=y
|
|
CONFIG_DEBUG_UART_SHIFT=2
|
|
CONFIG_SYSRESET=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_DWC2=y
|
|
CONFIG_ROCKCHIP_USB2_PHY=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x2207
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0x320a
|
|
CONFIG_USB_GADGET_DWC2_OTG=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_CMD_DHRYSTONE=y
|
|
CONFIG_ERRNO_STR=y
|