u-boot

History

Simon Glass 9fb625ce05 env: Move env_set() to env.h Move env_set() over to the new header file. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Simon Glass <sjg@chromium.org>		2019-08-11 16:43:41 -04:00
..
neo	env: Move env_set() to env.h	2019-08-11 16:43:41 -04:00
Kconfig	mx6: remove SYS_SOC from board Kconfig	2015-09-13 10:37:29 +02:00
MAINTAINERS	MAINTAINERS/mailmap: Update my email address	2016-01-11 11:22:43 -05:00
Makefile	SPDX: Convert all of our single license tags to Linux Kernel style	2018-05-07 09:34:12 -04:00
README	udoo: Add a README file	2016-10-06 09:40:34 +02:00
udoo_spl.c	Convert to use fsl_esdhc_imx for i.MX platforms	2019-06-23 14:18:34 +08:00
udoo.c	env: Move env_set() to env.h	2019-08-11 16:43:41 -04:00

README

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.