u-boot/configs/cl-som-am57x_defconfig
Vignesh R 6d82517836 configs: Don't use SPI_FLASH_BAR as default
Now that new SPI NOR layer uses stateless 4 byte opcodes by default,
don't enable SPI_FLASH_BAR. For SPI controllers that cannot support
4-byte addressing, (stm32_qspi.c, fsl_qspi.c, mtk_qspi.c, ich.c,
renesas_rpc_spi.c) add an imply clause to enable SPI_FLASH_BAR so as to
not break functionality.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Tested-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Tested-by: Stefan Roese <sr@denx.de>
Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com> #zynq-microzed
2019-02-07 15:33:22 +05:30

64 lines
1.4 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_OMAP54XX=y
CONFIG_TARGET_CL_SOM_AM57X=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_NR_DRAM_BANKS=2
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_VERSION_VARIABLE=y
# CONFIG_SPL_FS_EXT4 is not set
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_PROMPT="U-Boot# "
CONFIG_CMD_ASKENV=y
CONFIG_CMD_EEPROM=y
CONFIG_CMD_EEPROM_LAYOUT=y
CONFIG_EEPROM_LAYOUT_HELP_STRING="v2, v3"
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_EXT4_WRITE=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SCSI_AHCI=y
CONFIG_CMD_PCA953X=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS_GPIO=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=37
CONFIG_LED_STATUS_STATE=2
CONFIG_MMC_OMAP_HS=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_MII=y
CONFIG_DRIVER_TI_CPSW=y
CONFIG_CONS_INDEX=3
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_TI_QSPI=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_OMAP_USB_PHY=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_FAT_WRITE=y
CONFIG_OF_LIBFDT=y