e7005b3e80
Communication with some SPI slaves just won't cut it if these delays (before the beginning, and after the end of a transfer) are not added to the Chip Select signal. These are a straight copy from Linux: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt drivers/spi/spi-fsl-dspi.c Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> [Rebased] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> |
||
|---|---|---|
| .. | ||
| adc | ||
| arm | ||
| ata | ||
| axi | ||
| board | ||
| bus | ||
| clock | ||
| cpu | ||
| exynos | ||
| firmware | ||
| fpga | ||
| fsp/fsp2/apollolake | ||
| gpio | ||
| gpu | ||
| i2c | ||
| input | ||
| interrupt-controller | ||
| leds | ||
| mailbox | ||
| memory | ||
| memory-controller | ||
| memory-controllers | ||
| mfd | ||
| misc | ||
| mmc | ||
| mtd | ||
| nand | ||
| net | ||
| pci | ||
| pci_endpoint | ||
| phy | ||
| pinctrl | ||
| pmic | ||
| power | ||
| pwm | ||
| ram | ||
| regulator | ||
| remoteproc | ||
| reserved-memory | ||
| reset | ||
| rtc | ||
| serial | ||
| sound | ||
| spi | ||
| spmi | ||
| sysreset | ||
| thermal | ||
| timer | ||
| tpm2 | ||
| usb | ||
| video | ||
| w1 | ||
| w1-eeprom | ||
| chosen.txt | ||
| config.txt | ||
| device.txt | ||
| README | ||
| root.txt | ||
Device Tree Bindings Staging Area ================================= This directory contains device tree bindings for U-Boot. These follow along with Linux kernel bindings, with a few additions. By adding the files here, U-Boot patches can clearly show thees additions. This makes it easier for device tree people to review these additions in patches sent to the U-Boot mailing list. The intent IS to commit these files to U-Boot. Hopefully at some point the files will be stored in another repo (shared with Linux) which is brought in as needed. Changes here are intended to mirror changes in the Linux Documentation/devicetree/bindings/ directory. sjg@chromium.org 17-Jan-12