d791b1dc3e
* MPC823 LCD driver: Fill color map backwards, to allow for steady display when Linux takes over * Patch by Erwin Rol, 27 Feb 2003: Add support for RTEMS (this time for real). * Add support for "bmp info" and "bmp display" commands to load bitmap images; this can be used (for example in a "preboot" command) to display a splash screen very quickly after poweron. * Add support for 133 MHz clock on INCA-IP board
102 lines
1.2 KiB
Plaintext
102 lines
1.2 KiB
Plaintext
#
|
|
# The commands in this table are sorted alphabetically by the
|
|
# command name and in descending order by the command name string
|
|
# length. This is to prevent conflicts in command name parsing.
|
|
# Please ensure that new commands are added according to that rule.
|
|
# See $(TOPDIR)/common/command.c
|
|
#
|
|
########################
|
|
#
|
|
# command length
|
|
#
|
|
########################
|
|
askenv 8
|
|
as 2
|
|
autoscr 5
|
|
base 2
|
|
bdinfo 2
|
|
bmp 3
|
|
bootelf 7
|
|
bootm 5
|
|
bootp 5
|
|
bootvx 6
|
|
bootd 4
|
|
break 2
|
|
brginfo 3
|
|
carinfo 3
|
|
chpart 6
|
|
cmp 3
|
|
coninfo 5
|
|
continue 4
|
|
cp 2
|
|
crc32 3
|
|
date 3
|
|
dcache 2
|
|
dhcp 4
|
|
dmainfo 3
|
|
ds 2
|
|
dtt 3
|
|
echo 4
|
|
eeprom 3
|
|
erase 3
|
|
fccinfo 3
|
|
fdcboot 4
|
|
flinfo 3
|
|
fpga 4
|
|
fsinfo 5
|
|
fsload 5
|
|
getdcr 6 # IBM 4XX DCR registers
|
|
go 2
|
|
help 1
|
|
i2cinfo 4
|
|
i2c 3
|
|
icache 2
|
|
icinfo 3
|
|
ide 3
|
|
iminfo 3
|
|
iopinfo 3
|
|
irqinfo 3
|
|
kgdb 4
|
|
loadb 5
|
|
loads 5
|
|
loop 4
|
|
ls 2
|
|
mccinfo 3
|
|
md 2
|
|
memcinfo 4
|
|
mii 3
|
|
mm 2
|
|
mtest 5
|
|
muxinfo 3
|
|
mw 2
|
|
next 4
|
|
nm 2
|
|
pciinfo 3
|
|
pinit 4
|
|
printenv 8
|
|
protect 4
|
|
rarpboot 4
|
|
rdump 5
|
|
reginfo 3
|
|
reset 5
|
|
run 3
|
|
saveenv 4
|
|
sccinfo 3
|
|
scsiboot 5
|
|
scsi 4
|
|
siiinfo 3
|
|
sitinfo 3
|
|
siuinfo 3
|
|
setdcr 6 # IBM 4XX DCR registers
|
|
setenv 6
|
|
smcinfo 3
|
|
spiinfo 3
|
|
sspi 4
|
|
stack 5
|
|
step 4
|
|
tftpboot 4
|
|
usbboot 5
|
|
usb 4
|
|
version 4
|
|
? 1
|