Nikita Kiryanov d6276ab10d arm: mx6: cm-fx6: force host mode on usb controller ... On some CM-FX6 modules U-Boot attempts to configure the usb0 controller in device mode, which renders it unavailable: USB0: Port not available. and also causes usb stop to report an error EHCI failed to shut down host controller. This happens mostly on MX6 Dual based modules, and is caused by the USBPHY_CTRL register reporting USBPHY_CTRL_OTG_ID to be 1, even when it is pulled down. Since we do not support device mode in cm-fx6 u-boot, force all controllers to be configured as hosts. Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>		2015-09-02 15:38:16 +02:00
..
cm_fx6.c	arm: mx6: cm-fx6: force host mode on usb controller	2015-09-02 15:38:16 +02:00
common.c	ARM: i.MX: provide declaration for board_spi_cs_gpio	2014-10-21 10:47:14 +02:00
common.h	arm: mx6: cm_fx6: add sata support	2014-09-09 15:37:08 +02:00
Kconfig	kconfig: arm: introduce symbol for ARM CPUs	2014-10-29 09:02:09 -04:00
MAINTAINERS	arm: mx6: add support for Compulab cm-fx6 CoM	2014-09-09 15:35:43 +02:00
Makefile	arm: mx6: add support for Compulab cm-fx6 CoM	2014-09-09 15:35:43 +02:00
spl.c	imx: mx6 remove duplicated enable_cspi_clock	2015-07-10 09:35:53 +02:00