u-boot/include/configs/xea.h
Adam Ford e91907a146 Convert CONFIG_ENV_OVERWRITE to Kconfig
This converts the following to Kconfig:
   CONFIG_ENV_OVERWRITE

Signed-off-by: Adam Ford <aford173@gmail.com>
[trini: Rerun migration, remove some comments]
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-28 16:18:06 -04:00

195 lines
6.2 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2019 DENX Software Engineering
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
*
* Copyright (C) 2018 DENX Software Engineering
* Måns Rullgård, DENX Software Engineering, mans@mansr.com
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*/
#ifndef __CONFIGS_XEA_H__
#define __CONFIGS_XEA_H__
#include <linux/sizes.h>
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/* SPL */
#define CONFIG_SPL_STACK 0x20000
#define CONFIG_SYS_SPL_ARGS_ADDR 0x44000000
#define CONFIG_SYS_SPI_KERNEL_OFFS SZ_1M
#define CONFIG_SYS_SPI_ARGS_OFFS SZ_512K
#define CONFIG_SYS_SPI_ARGS_SIZE SZ_32K
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (SZ_512K / 0x200)
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (SZ_32K / 0x200)
#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR (SZ_1M / 0x200)
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SPI_FLASH_MTD
#endif
/* Memory configuration */
#define PHYS_SDRAM_1 0x40000000 /* Base address */
#define PHYS_SDRAM_1_SIZE 0x10000000 /* Max 256 MB RAM */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
/* Environment */
/* Booting Linux */
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTCOMMAND "run ${bootpri} ; run ${bootsec}"
#define CONFIG_LOADADDR 0x42000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/* Extra Environment */
#define CONFIG_PREBOOT "run prebootcmd"
#define CONFIG_HOSTNAME "xea"
#define CONFIG_EXTRA_ENV_SETTINGS \
"bootmode=update\0" \
"bootpri=mmc_mmc\0" \
"bootsec=sf_swu\0" \
"consdev=ttyAMA0\0" \
"baudrate=115200\0" \
"dtbaddr=0x44000000\0" \
"dtbfile=imx28-xea.dtb\0" \
"rootdev=/dev/mmcblk0p2\0" \
"netdev=eth0\0" \
"rdaddr=0x43000000\0" \
"swufile=swupdate.img\0" \
"sf_kernel_offset=0x100000\0" \
"sf_kernel_size=0x400000\0" \
"sf_swu_offset=0x500000\0" \
"sf_swu_size=0x800000\0" \
"rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
"do_update_mmc=" \
"if mmc rescan ; then " \
"mmc dev 0 ${update_mmc_part} ; " \
"if dhcp ${hostname}/${update_filename} ; then " \
"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
"setexpr fw_sz ${fw_sz} + 1 ; " \
"mmc write ${loadaddr} ${update_offset} ${fw_sz} ; " \
"fi ; " \
"fi\0" \
"do_update_sf=" \
"if sf probe ; then " \
"if dhcp ${hostname}/${update_filename} ; then " \
"sf erase ${update_offset} +${filesize} ; " \
"sf write ${loadaddr} ${update_offset} ${filesize} ; " \
"fi ; " \
"fi\0" \
"update_spl_filename=u-boot.sb\0" \
"update_spl=" \
"setenv update_filename ${update_spl_filename} ; " \
"setenv update_offset 0 ; " \
"run do_update_sf\0" \
"update_uboot_filename=u-boot.img\0" \
"update_uboot=" \
"setenv update_filename ${update_uboot_filename} ; " \
"setenv update_offset 0x10000 ; " \
"run do_update_sf ; " \
"setenv update_mmc_part 1 ; " \
"setenv update_offset 0 ; " \
"run do_update_mmc\0" \
"update_kernel_filename=uImage\0" \
"update_kernel=" \
"setenv update_mmc_part 1 ; " \
"setenv update_filename ${update_kernel_filename} ; " \
"setenv update_offset 0x800 ; " \
"run do_update_mmc ; " \
"setenv update_filename ${dtbfile} ; " \
"setenv update_offset 0x400 ; " \
"run do_update_mmc\0" \
"update_sfkernel=" \
"setenv update_filename fitImage ; " \
"setenv update_offset ${sf_kernel_offset} ; " \
"run do_update_sf\0" \
"update_swu=" \
"setenv update_filename ${swufile} ; " \
"setenv update_offset ${sf_swu_offset} ; " \
"run do_update_sf\0" \
"addcons=" \
"setenv bootargs ${bootargs} " \
"console=${consdev},${baudrate}\0" \
"addip=" \
"setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:${hostname}:${netdev}:off\0" \
"addmisc=" \
"setenv bootargs ${bootargs} ${miscargs}\0" \
"addargs=run addcons addmisc\0" \
"mmcload=" \
"mmc rescan ; " \
"mmc dev 0 1 ; " \
"mmc read ${loadaddr} 0x800 0x2000 ; " \
"mmc read ${dtbaddr} 0x400 0x80\0" \
"netload=" \
"dhcp ${loadaddr} ${hostname}/${bootfile} ; " \
"tftp ${dtbaddr} ${hostname}/${dtbfile}\0" \
"sfload=" \
"sf probe ; " \
"sf read ${loadaddr} ${sf_kernel_offset} ${sf_kernel_size}\0" \
"usbload=" \
"usb start ; " \
"load usb 0:1 ${loadaddr} ${bootfile}\0" \
"miscargs=panic=1\0" \
"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
"nfsargs=" \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
"mmc_mmc=" \
"if run mmcload mmcargs addargs ; then " \
"bootm ${loadaddr} - ${dtbaddr} ; " \
"fi\0" \
"mmc_nfs=" \
"if run mmcload nfsargs addip addargs ; then " \
"bootm ${loadaddr} - ${dtbaddr} ; " \
"fi\0" \
"sf_mmc=" \
"if run sfload mmcargs addargs ; then " \
"bootm ${loadaddr} - ${dtbaddr} ; " \
"fi\0" \
"sf_swu=" \
"if run sfload ; then " \
"sf read ${rdaddr} ${sf_swu_offset} ${sf_swu_size} ; " \
"setenv bootargs root=/dev/ram0 rw ; " \
"run addargs ; " \
"bootm ${loadaddr} ${rdaddr} ; " \
"fi\0" \
"net_mmc=" \
"if run netload mmcargs addargs ; then " \
"bootm ${loadaddr} - ${dtbaddr} ; " \
"fi\0" \
"net_nfs=" \
"if run netload nfsargs addip addargs ; then " \
"bootm ${loadaddr} - ${dtbaddr} ; " \
"fi\0" \
"prebootcmd=" \
"if test \"${envsaved}\" != y ; then ; " \
"setenv envsaved y ; " \
"saveenv ; " \
"fi ; " \
"if test \"${bootmode}\" = normal ; then " \
"setenv bootdelay 0 ; " \
"setenv bootpri mmc_mmc ; " \
"elif test \"${bootmode}\" = devel ; then " \
"setenv bootdelay 3 ; " \
"setenv bootpri net_mmc ; " \
"else " \
"if test \"${bootmode}\" != update ; then " \
"echo Warning: unknown bootmode \"${bootmode}\" ; " \
"fi ; " \
"setenv bootdelay 1 ; " \
"setenv bootpri sf_swu ; " \
"fi\0"
/* The rest of the configuration is shared */
#include <configs/mxs.h>
#endif /* __CONFIGS_XEA_H__ */