leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d0ccb9b140
u-boot/Makefile
Stefan Roese 71665ebf88 ppc4xx: Add Canyonlands NAND booting support 
460EX doesn't support a fixed bootstrap option to boot from 512 byte page
NAND devices. The only bootstrap option for NAND booting is option F for
2k page devices. So to boot from a 512 bype page device, the I2C bootstrap
EEPROM needs to be programmed accordingly.

This patch adds basic NAND booting support for the AMCC Canyonlands aval
board and also adds support to the "bootstrap" command, to enable NAND
booting I2C setting.

Tested with 512 byte page NAND device (32MByte) on Canyonlands.

Signed-off-by: Stefan Roese <sr@denx.de>
2008-03-15 07:28:05 +01:00

2912 lines
90 KiB
Makefile
Raw Blame History

#
# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License as
# published by the Free Software Foundatio; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
VERSION = 1
PATCHLEVEL = 3
SUBLEVEL = 2
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
HOSTARCH := $(shell uname -m | \
sed -e s/i.86/i386/ \
-e s/sun4u/sparc64/ \
-e s/arm.*/arm/ \
-e s/sa110/arm/ \
-e s/powerpc/ppc/ \
-e s/ppc64/ppc/ \
-e s/macppc/ppc/)
HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
sed -e 's/\(cygwin\).*/cygwin/')
export HOSTARCH HOSTOS
# Deal with colliding definitions from tcsh etc.
VENDOR=
#########################################################################
# Allow for silent builds
ifeq (,$(findstring s,$(MAKEFLAGS)))
XECHO = echo
else
XECHO = :
endif
#########################################################################
#
# U-boot build supports producing a object files to the separate external
# directory. Two use cases are supported:
#
# 1) Add O= to the make command line
# 'make O=/tmp/build all'
#
# 2) Set environement variable BUILD_DIR to point to the desired location
# 'export BUILD_DIR=/tmp/build'
# 'make'
#
# The second approach can also be used with a MAKEALL script
# 'export BUILD_DIR=/tmp/build'
# './MAKEALL'
#
# Command line 'O=' setting overrides BUILD_DIR environent variable.
#
# When none of the above methods is used the local build is performed and
# the object files are placed in the source directory.
#
ifdef O
ifeq ("$(origin O)", "command line")
BUILD_DIR := $(O)
endif
endif
ifneq ($(BUILD_DIR),)
saved-output := $(BUILD_DIR)
# Attempt to create a output directory.
$(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR})
# Verify if it was successful.
BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd)
$(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist))
endif # ifneq ($(BUILD_DIR),)
OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR))
SRCTREE := $(CURDIR)
TOPDIR := $(SRCTREE)
LNDIR := $(OBJTREE)
export TOPDIR SRCTREE OBJTREE
MKCONFIG := $(SRCTREE)/mkconfig
export MKCONFIG
ifneq ($(OBJTREE),$(SRCTREE))
REMOTE_BUILD := 1
export REMOTE_BUILD
endif
# $(obj) and (src) are defined in config.mk but here in main Makefile
# we also need them before config.mk is included which is the case for
# some targets like unconfig, clean, clobber, distclean, etc.
ifneq ($(OBJTREE),$(SRCTREE))
obj := $(OBJTREE)/
src := $(SRCTREE)/
else
obj :=
src :=
endif
export obj src
# Make sure CDPATH settings don't interfere
unexport CDPATH
#########################################################################
ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
# load ARCH, BOARD, and CPU configuration
include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
ifndef CROSS_COMPILE
ifeq ($(HOSTARCH),$(ARCH))
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
endif
ifeq ($(ARCH),i386)
CROSS_COMPILE = i386-linux-
endif
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
ifeq ($(ARCH),nios)
CROSS_COMPILE = nios-elf-
endif
ifeq ($(ARCH),nios2)
CROSS_COMPILE = nios2-elf-
endif
ifeq ($(ARCH),m68k)
CROSS_COMPILE = m68k-elf-
endif
ifeq ($(ARCH),microblaze)
CROSS_COMPILE = mb-
endif
ifeq ($(ARCH),blackfin)
CROSS_COMPILE = bfin-uclinux-
endif
ifeq ($(ARCH),avr32)
CROSS_COMPILE = avr32-linux-
endif
ifeq ($(ARCH),sh)
CROSS_COMPILE = sh4-linux-
endif # sh
endif # HOSTARCH,ARCH
endif # CROSS_COMPILE
export CROSS_COMPILE
# load other configuration
include $(TOPDIR)/config.mk
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
OBJS += cpu/$(CPU)/start16.o
OBJS += cpu/$(CPU)/reset.o
endif
ifeq ($(CPU),ppc4xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
ifeq ($(CPU),mpc85xx)
OBJS += cpu/$(CPU)/resetvec.o
endif
OBJS := $(addprefix $(obj),$(OBJS))
LIBS = lib_generic/libgeneric.a
LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
"board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
ifdef SOC
LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
endif
ifeq ($(CPU),ixp)
LIBS += cpu/ixp/npe/libnpe.a
endif
LIBS += lib_$(ARCH)/lib$(ARCH).a
LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
LIBS += drivers/dma/libdma.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/misc/libmisc.a
LIBS += drivers/mtd/libmtd.a
LIBS += drivers/mtd/nand/libnand.a
LIBS += drivers/mtd/nand_legacy/libnand_legacy.a
LIBS += drivers/mtd/onenand/libonenand.a
LIBS += drivers/net/libnet.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
endif
LIBS += drivers/rtc/librtc.a
LIBS += drivers/serial/libserial.a
LIBS += drivers/usb/libusb.a
LIBS += drivers/video/libvideo.a
LIBS += post/libpost.a post/drivers/libpostdrivers.a
LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
"post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
"post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
"post/cpu/$(CPU)/libpost$(CPU).a"; fi)
LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
LIBS += api/libapi.a
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS) $(VERSION_FILE)
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
# The "tools" are needed early, so put this first
# Don't include stuff already done in $(LIBS)
SUBDIRS = tools \
examples \
api_examples
.PHONY : $(SUBDIRS)
ifeq ($(CONFIG_NAND_U_BOOT),y)
NAND_SPL = nand_spl
U_BOOT_NAND = $(obj)u-boot-nand.bin
endif
ifeq ($(CONFIG_ONENAND_U_BOOT),y)
ONENAND_IPL = onenand_ipl
U_BOOT_ONENAND = $(obj)u-boot-onenand.bin
endif
__OBJS := $(subst $(obj),,$(OBJS))
__LIBS := $(subst $(obj),,$(LIBS))
#########################################################################
#########################################################################
ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND)
ifeq ($(ARCH),blackfin)
ALL += $(obj)u-boot.ldr
endif
all: $(ALL)
$(obj)u-boot.hex: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
$(obj)u-boot.srec: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
$(obj)u-boot.bin: $(obj)u-boot
$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
$(obj)u-boot.ldr: $(obj)u-boot
$(LDR) -T $(CONFIG_BFIN_CPU) -f -c $@ $< $(LDR_FLAGS)
$(obj)u-boot.ldr.hex: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
$(obj)u-boot.ldr.srec: $(obj)u-boot.ldr
$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
$(obj)u-boot.img: $(obj)u-boot.bin
./tools/mkimage -A $(ARCH) -T firmware -C none \
-a $(TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
$(OBJS): depend $(obj)include/autoconf.mk
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
$(LIBS): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
$(SUBDIRS): depend $(obj)include/autoconf.mk
$(MAKE) -C $@ all
$(LDSCRIPT): depend $(obj)include/autoconf.mk
$(MAKE) -C $(dir $@) $(notdir $@)
$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
$(ONENAND_IPL): $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C onenand_ipl/board/$(BOARDDIR) all
$(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
cat $(obj)onenand_ipl/onenand-ipl-2k.bin $(obj)u-boot.bin > $(obj)u-boot-onenand.bin
$(VERSION_FILE):
@( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
echo -n "$(U_BOOT_VERSION)" ; \
echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
$(TOPDIR)) ; \
echo "\"" ) > $@.tmp
@cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@
gdbtools:
$(MAKE) -C tools/gdb all || exit 1
updater:
$(MAKE) -C tools/updater all || exit 1
env:
$(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
depend dep: $(VERSION_FILE)
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
TAG_SUBDIRS += include
TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
TAG_SUBDIRS += cpu/$(CPU)
TAG_SUBDIRS += lib_$(ARCH)
TAG_SUBDIRS += fs/cramfs
TAG_SUBDIRS += fs/fat
TAG_SUBDIRS += fs/fdos
TAG_SUBDIRS += fs/jffs2
TAG_SUBDIRS += net
TAG_SUBDIRS += disk
TAG_SUBDIRS += common
TAG_SUBDIRS += drivers/bios_emulator
TAG_SUBDIRS += drivers/block
TAG_SUBDIRS += drivers/hwmon
TAG_SUBDIRS += drivers/i2c
TAG_SUBDIRS += drivers/input
TAG_SUBDIRS += drivers/misc
TAG_SUBDIRS += drivers/mtd
TAG_SUBDIRS += drivers/mtd/nand
TAG_SUBDIRS += drivers/mtd/nand_legacy
TAG_SUBDIRS += drivers/mtd/onenand
TAG_SUBDIRS += drivers/net
TAG_SUBDIRS += drivers/net/sk98lin
TAG_SUBDIRS += drivers/pci
TAG_SUBDIRS += drivers/pcmcia
TAG_SUBDIRS += drivers/qe
TAG_SUBDIRS += drivers/rtc
TAG_SUBDIRS += drivers/serial
TAG_SUBDIRS += drivers/spi
TAG_SUBDIRS += drivers/usb
TAG_SUBDIRS += drivers/video
tags ctags:
ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
-name '*.[ch]' -print`
etags:
etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
-name '*.[ch]' -print`
cscope:
find $(SUBDIRS) $(TAG_SUBDIRS) -name '*.[ch]' -print \
> cscope.files
cscope -b -q -k
$(obj)System.map: $(obj)u-boot
@$(NM) $< | \
grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
sort > $(obj)System.map
#
# Auto-generate the autoconf.mk file (which is included by all makefiles)
#
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
$(obj)include/autoconf.mk: $(obj)include/config.h $(VERSION_FILE)
@$(XECHO) Generating include/autoconf.mk ; \
set -e ; \
: Generate the dependancies ; \
$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep ; \
: Extract the config macros ; \
$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed > $@
sinclude $(obj)include/autoconf.mk.dep
#########################################################################
else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
dep tags ctags etags cscope $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
endif # config.mk
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
unexpand -a | sed -e 's/\s\s*$$//' > $@
#########################################################################
unconfig:
@rm -f $(obj)include/config.h $(obj)include/config.mk \
$(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \
$(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep
#========================================================================
# PowerPC
#========================================================================
#########################################################################
## MPC5xx Systems
#########################################################################
canmb_config: unconfig
@$(MKCONFIG) -a canmb ppc mpc5xxx canmb
cmi_mpc5xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc5xx cmi
PATI_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc5xx pati mpl
#########################################################################
## MPC5xxx Systems
#########################################################################
aev_config: unconfig
@$(MKCONFIG) -a aev ppc mpc5xxx tqm5200
BC3450_config: unconfig
@$(MKCONFIG) -a BC3450 ppc mpc5xxx bc3450
cpci5200_config: unconfig
@$(MKCONFIG) -a cpci5200 ppc mpc5xxx cpci5200 esd
hmi1001_config: unconfig
@$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
Lite5200_config \
Lite5200_LOWBOOT_config \
Lite5200_LOWBOOT08_config \
icecube_5200_config \
icecube_5200_LOWBOOT_config \
icecube_5200_LOWBOOT08_config \
icecube_5200_DDR_config \
icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_LOWBOOT08_config \
icecube_5100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ if [ "$(findstring DDR,$@)" ] ; \
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
echo "... with 8 MB flash only" ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200 processor" ; \
}
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
$(XECHO) "... with MGT5100 processor" ; \
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
jupiter_config: unconfig
@$(MKCONFIG) jupiter ppc mpc5xxx jupiter
v38b_config: unconfig
@$(MKCONFIG) -a v38b ppc mpc5xxx v38b
inka4x0_config: unconfig
@$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
lite5200b_config \
lite5200b_PM_config \
lite5200b_LOWBOOT_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/icecube
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@ $(XECHO) "... DDR memory revision"
@ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
{ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
$(XECHO) "... with power management (low-power mode) support" ; \
}
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
$(XECHO) "... with LOWBOOT configuration" ; \
}
@ $(XECHO) "... with MPC5200B processor"
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
mcc200_SDRAM_config \
mcc200_highboot_config \
mcc200_COM12_config \
mcc200_COM12_SDRAM_config \
mcc200_COM12_highboot_config \
mcc200_COM12_highboot_SDRAM_config \
mcc200_highboot_SDRAM_config \
prs200_config \
prs200_DDR_config \
prs200_highboot_config \
prs200_highboot_DDR_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
@[ -n "$(findstring highboot,$@)" ] || \
{ $(XECHO) "... with lowboot configuration" ; \
}
@[ -z "$(findstring highboot,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
$(XECHO) "... with highboot configuration" ; \
}
@[ -n "$(findstring _SDRAM,$@)" ] || \
{ if [ -n "$(findstring mcc200,$@)" ]; \
then \
$(XECHO) "... with DDR" ; \
else \
if [ -n "$(findstring _DDR,$@)" ];\
then \
$(XECHO) "... with DDR" ; \
else \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
$(XECHO) "... with SDRAM" ; \
fi; \
fi; \
}
@[ -z "$(findstring _SDRAM,$@)" ] || \
{ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
$(XECHO) "... with SDRAM" ; \
}
@[ -z "$(findstring COM12,$@)" ] || \
{ echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
$(XECHO) "... with console on COM12" ; \
}
@[ -z "$(findstring prs200,$@)" ] || \
{ echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
}
@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
mecp5200_config: unconfig
@$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
munices_config: unconfig
@$(MKCONFIG) munices ppc mpc5xxx munices
o2dnt_config: unconfig
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
pf5200_config: unconfig
@$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
PM520_ROMBOOT_DDR_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
$(XECHO) "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
$(XECHO) "... booting from 8-bit flash" ; \
}
@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
smmaco4_config: unconfig
@$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
cm5200_config: unconfig
@$(MKCONFIG) -a cm5200 ppc mpc5xxx cm5200
spieval_config: unconfig
@$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
TB5200_B_config \
TB5200_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200B processor" ; \
}
@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
MINI5200_config \
EVAL5200_config \
TOP5200_config: unconfig
@mkdir -p $(obj)include
@ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a TOP5200 ppc mpc5xxx top5200 emk
Total5100_config \
Total5200_config \
Total5200_lowboot_config \
Total5200_Rev2_config \
Total5200_Rev2_lowboot_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/total5200
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
$(XECHO) "... with MGT5100 processor" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
$(XECHO) "... with MPC5200 processor" ; \
}
@[ -n "$(findstring Rev,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
$(XECHO) "... revision 1 board" ; \
}
@[ -z "$(findstring Rev2_,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
$(XECHO) "... revision 2 board" ; \
}
@[ -z "$(findstring lowboot_,$@)" ] || \
{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
cam5200_config \
cam5200_niosflash_config \
fo300_config \
MiniFAP_config \
TQM5200S_config \
TQM5200S_HIGHBOOT_config \
TQM5200_B_config \
TQM5200_B_HIGHBOOT_config \
TQM5200_config \
TQM5200_STK100_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/tqm5200
@[ -z "$(findstring cam5200,$@)" ] || \
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
$(XECHO) "... TQM5200S on Cam5200" ; \
}
@[ -z "$(findstring niosflash,$@)" ] || \
{ echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
$(XECHO) "... with NIOS flash driver" ; \
}
@[ -z "$(findstring fo300,$@)" ] || \
{ echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
$(XECHO) "... TQM5200 on FO300" ; \
}
@[ -z "$(findstring MiniFAP,$@)" ] || \
{ echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
$(XECHO) "... TQM5200_AC on MiniFAP" ; \
}
@[ -z "$(findstring STK100,$@)" ] || \
{ echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
$(XECHO) "... on a STK52XX.100 base board" ; \
}
@[ -z "$(findstring TQM5200_B,$@)" ] || \
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring TQM5200S,$@)" ] || \
{ echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
uc101_config: unconfig
@$(MKCONFIG) uc101 ppc mpc5xxx uc101
motionpro_config: unconfig
@$(MKCONFIG) motionpro ppc mpc5xxx motionpro
#########################################################################
## MPC512x Systems
#########################################################################
ads5121_config \
ads5121_PCI_config \
: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
$(XECHO) "... with PCI enabled" ; \
fi
@$(MKCONFIG) -a ads5121 ppc mpc512x ads5121
#########################################################################
## MPC8xx Systems
#########################################################################
Adder_config \
Adder87x_config \
AdderII_config \
: unconfig
@mkdir -p $(obj)include
$(if $(findstring AdderII,$@), \
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
@$(MKCONFIG) -a Adder ppc mpc8xx adder
AdderUSB_config: unconfig
@$(MKCONFIG) -a AdderUSB ppc mpc8xx adder
ADS860_config \
FADS823_config \
FADS850SAR_config \
MPC86xADS_config \
MPC885ADS_config \
FADS860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx amx860 westel
c2mon_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx c2mon
CCM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx CCM siemens
cogent_mpc8xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx cogent
ELPT860_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx elpt860 LEOX
EP88x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx ep88x
ESTEEM192E_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx esteem192e
ETX094_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx etx094
FLAGADM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx flagadm
xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
GEN860T_SC_config \
GEN860T_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _SC,$@)" ] || \
{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
$(XECHO) "With reduced H/W feature set (SC)..." ; \
}
@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
GENIETV_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx genietv
GTH_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx gth
hermes_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx hermes
HMI10_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
IAD210_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx IAD210 siemens
xtract_ICU862 = $(subst _100MHz,,$(subst _config,,$1))
ICU862_100MHz_config \
ICU862_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
}
@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
IP860_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx ip860
IVML24_256_config \
IVML24_128_config \
IVML24_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVML24_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_128_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVML24_256_config,$@)" ] || \
{ echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a IVML24 ppc mpc8xx ivm
IVMS8_256_config \
IVMS8_128_config \
IVMS8_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring IVMS8_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_128_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring IVMS8_256_config,$@)" ] || \
{ echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a IVMS8 ppc mpc8xx ivm
KUP4K_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4k kup
KUP4X_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx kup4x kup
LANTEC_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx lantec
lwmon_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx lwmon
MBX_config \
MBX860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
mgsuvd_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
MVS1_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mvs1
xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
NETVIA_V2_config \
NETVIA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETVIA_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
$(XECHO) "... Version 1" ; \
}
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
$(XECHO) "... Version 2" ; \
}
@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
xtract_NETPHONE = $(subst _V2,,$(subst _config,,$1))
NETPHONE_V2_config \
NETPHONE_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETPHONE_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a $(call xtract_NETPHONE,$@) ppc mpc8xx netphone
xtract_NETTA = $(subst _SWAPHOOK,,$(subst _6412,,$(subst _ISDN,,$(subst _config,,$1))))
NETTA_ISDN_6412_SWAPHOOK_config \
NETTA_ISDN_SWAPHOOK_config \
NETTA_6412_SWAPHOOK_config \
NETTA_SWAPHOOK_config \
NETTA_ISDN_6412_config \
NETTA_ISDN_config \
NETTA_6412_config \
NETTA_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring ISDN_,$@)" ] || \
{ echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring ISDN_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring 6412_,$@)" ] || \
{ echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring 6412_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring SWAPHOOK_,$@)" ] || \
{ echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h ; \
}
@[ -n "$(findstring SWAPHOOK_,$@)" ] || \
{ echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a $(call xtract_NETTA,$@) ppc mpc8xx netta
xtract_NETTA2 = $(subst _V2,,$(subst _config,,$1))
NETTA2_V2_config \
NETTA2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring NETTA2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring NETTA2_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a $(call xtract_NETTA2,$@) ppc mpc8xx netta2
NC650_Rev1_config \
NC650_Rev2_config \
CP850_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring CP850,$@)" ] || \
{ echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev1,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring Rev2,$@)" ] || \
{ echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \
}
@$(MKCONFIG) -a NC650 ppc mpc8xx nc650
NX823_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx nx823
pcu_e_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx pcu_e siemens
QS850_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS823_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs850 snmc
QS860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx qs860t snmc
quantum_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx quantum
R360MPI_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx r360mpi
RBC823_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx rbc823
RPXClassic_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXClassic
RPXlite_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RPXlite
RPXlite_DW_64_config \
RPXlite_DW_LCD_config \
RPXlite_DW_64_LCD_config \
RPXlite_DW_NVRAM_config \
RPXlite_DW_NVRAM_64_config \
RPXlite_DW_NVRAM_LCD_config \
RPXlite_DW_NVRAM_64_LCD_config \
RPXlite_DW_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _64,$@)" ] || \
{ echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
$(XECHO) "... with 64MHz system clock ..."; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
{ echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
$(XECHO) "... with ENV in NVRAM ..."; \
}
@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
rmu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx rmu
RRvision_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx RRvision
RRvision_LCD_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a RRvision ppc mpc8xx RRvision
SM850_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx tqm8xx
spc1920_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spc1920
SPD823TS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx spd8xx
stxxtc_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx stxxtc
svm_sc8xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx svm_sc8xx
SXNI855T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx sixnet
# EMK MPC8xx based modules
TOP860_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx top860 emk
# Play some tricks for configuration selection
# Only 855 and 860 boards may come with FEC
# and only 823 boards may have LCD support
xtract_8xx = $(subst _LCD,,$(subst _config,,$1))
FPS850L_config \
FPS860L_config \
NSCU_config \
TQM823L_config \
TQM823L_LCD_config \
TQM850L_config \
TQM855L_config \
TQM860L_config \
TQM862L_config \
TQM823M_config \
TQM850M_config \
TQM855M_config \
TQM860M_config \
TQM862M_config \
TQM866M_config \
TQM885D_config \
TK885D_config \
virtlab2_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
$(XECHO) "... with LCD display" ; \
}
@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
TTTech_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
uc100_config : unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx uc100
v37_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h
@$(MKCONFIG) $(@:_config=) ppc mpc8xx v37
wtk_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_LCD" >$(obj)include/config.h
@echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h
@$(MKCONFIG) -a TQM823L ppc mpc8xx tqm8xx
#########################################################################
## PPC4xx Systems
#########################################################################
xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1))))))
acadia_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
acadia_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
ADCIOP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
alpr_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
AP1000_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
APC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx apc405 esd
AR405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ar405 esd
ASH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ash405 esd
bamboo_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
bamboo_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
bubinga_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
CANBT_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx canbt esd
canyonlands_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx canyonlands amcc
canyonlands_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/canyonlands
@mkdir -p $(obj)nand_spl/board/amcc/canyonlands
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a canyonlands ppc ppc4xx canyonlands amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
CATcenter_config \
CATcenter_25_config \
CATcenter_33_config: unconfig
@mkdir -p $(obj)include
@ echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h
@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
$(XECHO) "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
CPCI2DP_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci2dp esd
CPCI405_config \
CPCI4052_config \
CPCI405DT_config \
CPCI405AB_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
CPCIISER4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
CRAYL1_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx L1 cray
csb272_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb272
csb472_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx csb472
DASA_SIM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dasa_sim esd
DP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx dp405 esd
DU405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
DU440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
ebony_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
ERIC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx eric
EXBITGEN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx exbitgen
G2000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
hcu4_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
hcu5_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
HH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
HUB405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hub405 esd
JSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx jse
KAREF_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx karef sandburst
katmai_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
# Kilauea & Haleakala images are identical (recognized via PVR)
kilauea_config \
haleakala_config: unconfig
@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
kilauea_nand_config \
haleakala_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
korat_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
lwmon5_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
makalu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
mcu25_config: unconfig
@mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx mcu25 netstal
METROBOX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
MIP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx mip405 mpl
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
@$(XECHO) "Enable subset config for MIP405T"
@$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
ML2_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml2
ml300_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ml300 xilinx
ocotea_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocotea amcc
OCRTC_config \
ORSG_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ocrtc esd
p3p440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx p3p440 prodrive
PCI405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pci405 esd
pcs440ep_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pcs440ep
PIP405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pip405 mpl
PLU405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx plu405 esd
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
PMC440_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
PPChameleonEVB_HI_25_config \
PPChameleonEVB_BA_33_config \
PPChameleonEVB_ME_33_config \
PPChameleonEVB_HI_33_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring EVB_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
$(XECHO) "... BASIC model" ; \
}
@[ -z "$(findstring EVB_ME,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
$(XECHO) "... MEDIUM model" ; \
}
@[ -z "$(findstring EVB_HI,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
$(XECHO) "... HIGH-END model" ; \
}
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
$(XECHO) "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
$(XECHO) "SysClk = 33MHz" ; \
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
sbc405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sbc405
sequoia_config \
rainier_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
sequoia_nand_config \
rainier_nand_config: unconfig
@mkdir -p $(obj)include $(obj)board/amcc/sequoia
@mkdir -p $(obj)nand_spl/board/amcc/sequoia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@$(MKCONFIG) -n $@ -a sequoia ppc ppc4xx sequoia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
sc3_config:unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
taihu_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
taishan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
VOH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx voh405 esd
VOM405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx vom405 esd
CMS700_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cms700 esd
W7OLMC_config \
W7OLMG_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx w7o
# Walnut & Sycamore images are identical (recognized via PVR)
walnut_config \
sycamore_config: unconfig
@$(MKCONFIG) -n $@ -a walnut ppc ppc4xx walnut amcc
WUH405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx wuh405 esd
XPEDITE1K_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx xpedite1k
yosemite_config \
yellowstone_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h
@$(MKCONFIG) -n $@ -a yosemite ppc ppc4xx yosemite amcc
yucca_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
zeus_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
#########################################################################
## MPC8220 Systems
#########################################################################
Alaska8220_config \
Yukon8220_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8220 alaska
sorcery_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8220 sorcery
#########################################################################
## MPC824x Systems
#########################################################################
xtract_82xx = $(subst _BIGFLASH,,$(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1))))))
A3000_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x a3000
barco_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x barco
BMW_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x bmw
CPC45_config \
CPC45_ROMBOOT_config: unconfig
@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc824x cpc45
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
$(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
$(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CU824_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x cu824
debris_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x debris etin
eXalion_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x eXalion
HIDDEN_DRAGON_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x hidden_dragon
kvme080_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x kvme080 etin
MOUSSE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x mousse
MUSENKI_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x musenki
MVBLUE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x mvblue
OXC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x oxc
PN62_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x pn62
Sandpoint8240_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
Sandpoint8245_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sandpoint
sbc8240_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sbc8240
SL8245_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x sl8245
utx8245_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc824x utx8245
#########################################################################
## MPC8260 Systems
#########################################################################
atc_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 atc
cogent_mpc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 cogent
CPU86_config \
CPU86_ROMBOOT_config: unconfig
@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu86
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
$(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
$(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
CPU87_config \
CPU87_ROMBOOT_config: unconfig
@$(MKCONFIG) $(call xtract_82xx,$@) ppc mpc8260 cpu87
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
$(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
$(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
ep8248_config \
ep8248E_config : unconfig
@$(MKCONFIG) ep8248 ppc mpc8260 ep8248
ep8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
ep82xxm_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
gw8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
hymod_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 hymod
IDS8247_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ids8247
IPHASE4539_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 iphase4539
ISPAN_config \
ISPAN_REVB_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _REVB_,$@)" ] ; then \
echo "#define CFG_REV_B" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
mgcoge_config : unconfig
@$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
MPC8260ADS_33MHz_lowboot_config \
MPC8260ADS_40MHz_config \
MPC8260ADS_40MHz_lowboot_config \
MPC8272ADS_config \
MPC8272ADS_lowboot_config \
PQ2FADS_config \
PQ2FADS_lowboot_config \
PQ2FADS-VR_config \
PQ2FADS-VR_lowboot_config \
PQ2FADS-ZU_config \
PQ2FADS-ZU_lowboot_config \
PQ2FADS-ZU_66MHz_config \
PQ2FADS-ZU_66MHz_lowboot_config \
: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mpc8260ads
$(if $(findstring PQ2FADS,$@), \
@echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \
@echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h)
$(if $(findstring MHz,$@), \
@echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
$(XECHO) "... with lowboot configuration" ; \
}
@$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
MPC8266ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 mpc8266ads
# PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash
PM825_config \
PM825_ROMBOOT_config \
PM825_BIGFLASH_config \
PM825_ROMBOOT_BIGFLASH_config \
PM826_config \
PM826_ROMBOOT_config \
PM826_BIGFLASH_config \
PM826_ROMBOOT_BIGFLASH_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/pm826
@if [ "$(findstring PM825_,$@)" ] ; then \
echo "#define CONFIG_PCI" >$(obj)include/config.h ; \
else \
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
$(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
$(XECHO) "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
@$(MKCONFIG) -a PM826 ppc mpc8260 pm826
PM828_config \
PM828_PCI_config \
PM828_ROMBOOT_config \
PM828_ROMBOOT_PCI_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
$(XECHO) "... with PCI enabled" ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
$(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
@$(MKCONFIG) -a PM828 ppc mpc8260 pm828
ppmc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 ppmc8260
Rattler8248_config \
Rattler_config: unconfig
@mkdir -p $(obj)include
$(if $(findstring 8248,$@), \
@echo "#define CONFIG_MPC8248" > $(obj)include/config.h)
@$(MKCONFIG) -a Rattler ppc mpc8260 rattler
RPXsuper_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 rpxsuper
rsdproto_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 rsdproto
sacsng_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 sacsng
sbc8260_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 sbc8260
SCM_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 SCM siemens
TQM8255_AA_config \
TQM8260_AA_config \
TQM8260_AB_config \
TQM8260_AC_config \
TQM8260_AD_config \
TQM8260_AE_config \
TQM8260_AF_config \
TQM8260_AG_config \
TQM8260_AH_config \
TQM8260_AI_config \
TQM8265_AA_config: unconfig
@mkdir -p $(obj)include
@case "$@" in \
TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \
TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \
TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \
TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \
TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \
TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \
TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \
esac; \
if [ "$${CTYPE}" != "MPC8260" ] ; then \
echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
$(XECHO) "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
$(XECHO) "... without L2 Cache support" ; \
fi; \
if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... with 60x Bus Mode" ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
$(XECHO) "... without 60x Bus Mode" ; \
fi
@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
TQM8272_config: unconfig
@$(MKCONFIG) TQM8272 ppc mpc8260 tqm8272
VoVPN-GW_66MHz_config \
VoVPN-GW_100MHz_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h
@$(MKCONFIG) -a VoVPN-GW ppc mpc8260 vovpn-gw funkwerk
ZPC1900_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8260 zpc1900
#########################################################################
## Coldfire
#########################################################################
M52277EVB_config: unconfig
@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig
@case "$@" in \
M5235EVB_config) FLASH=16;; \
M5235EVB_Flash16_config) FLASH=16;; \
M5235EVB_Flash32_config) FLASH=32;; \
esac; \
if [ "$${FLASH}" != "16" ] ; then \
echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
else \
echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
@$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
M5249EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
M5253EVBE_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
cobra5272_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
@echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
idmr_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 idmr
M5271EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5271evb
M5272C3_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5272c3
M5282EVB_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb
TASREG_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 tasreg esd
r5200_config : unconfig
@$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
M5329AFEE_config \
M5329BFEE_config : unconfig
@case "$@" in \
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
M5373EVB_config : unconfig
@case "$@" in \
M5373EVB_config) NAND=16;; \
esac; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_a33_config \
M54455EVB_a66_config \
M54455EVB_i33_config \
M54455EVB_i66_config : unconfig
@case "$@" in \
M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \
M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \
M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with INTEL boot..." ; \
else \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
$(XECHO) "... with ATMEL boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
$(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
M5475AFE_config \
M5475BFE_config \
M5475CFE_config \
M5475DFE_config \
M5475EFE_config \
M5475FFE_config \
M5475GFE_config : unconfig
@case "$@" in \
M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
M5485AFE_config \
M5485BFE_config \
M5485CFE_config \
M5485DFE_config \
M5485EFE_config \
M5485FFE_config \
M5485GFE_config \
M5485HFE_config : unconfig
@case "$@" in \
M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \
esac; \
echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
if [ "$${RAM1}" != "0" ] ; then \
echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
fi; \
if [ "$${CODE}" != "0" ] ; then \
echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
fi; \
if [ "$${VID}" == "1" ] ; then \
echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
fi; \
if [ "$${USB}" == "1" ] ; then \
echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
#########################################################################
## MPC83xx Systems
#########################################################################
MPC8313ERDB_33_config \
MPC8313ERDB_66_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
MPC8315ERDB_config: unconfig
@$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
MPC832XEMDS_config \
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config \
MPC832XEMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
$(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
$(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
MPC8349EMDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
MPC8349ITX_config \
MPC8349ITX_LOWBOOT_config \
MPC8349ITXGP_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/freescale/mpc8349itx
@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
@if [ "$(findstring GP,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
MPC8360EMDS_config \
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config \
MPC8360EMDS_ATM_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
$(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
$(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
$(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
MPC8360ERDK_33_config \
MPC8360ERDK_66_config \
MPC8360ERDK_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) -n "... CLKIN 33MHz " ; \
echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
fi ;
@$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
MPC837XEMDS_config \
MPC837XEMDS_HOST_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _HOST_,$@)" ] ; then \
$(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
MPC837XERDB_config: unconfig
@$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
TQM834x_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx tqm834x
#########################################################################
## MPC85xx Systems
#########################################################################
ATUM8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
MPC8540ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
MPC8540EVAL_66_config \
MPC8540EVAL_33_slave_config \
MPC8540EVAL_66_slave_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _33_,$@)" ] ; then \
$(XECHO) "... 33 MHz PCI" ; \
else \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
$(XECHO) " slave" ; \
else \
$(XECHO) " host" ; \
fi
@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
@$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
MPC8548CDS_legacy_config \
MPC8548CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
@$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
$(XECHO) "... legacy" ; \
fi
@$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
PM856_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm856
sbc8540_config \
sbc8540_33_config \
sbc8540_66_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
else \
$(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
sbc8548_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
$(XECHO) "... 66 MHz PCI" ; \
else \
$(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
stxgp3_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
stxssa_config \
stxssa_4M_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
$(XECHO) "... with 4 MiB flash memory" ; \
fi
@$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
TQM8540_config \
TQM8541_config \
TQM8555_config \
TQM8560_config: unconfig
@mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
$(XECHO) "... TQM"$${CTYPE}; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
@$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
#########################################################################
## MPC86xx Systems
#########################################################################
MPC8610HPCD_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
MPC8641HPCN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
sbc8641d_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
BAB7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
CPCI750_config: unconfig
@$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
DB64360_config: unconfig
@$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
DB64460_config: unconfig
@$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
ELPPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx elppc eltec
EVB64260_config \
EVB64260_750CX_config: unconfig
@$(MKCONFIG) EVB64260 ppc 74xx_7xx evb64260
mpc7448hpc2_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx mpc7448hpc2
P3G4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
p3m750_config \
p3m7448_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring 750_,$@)" ] ; then \
echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \
else \
echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a p3mx ppc 74xx_7xx p3mx prodrive
PCIPPC2_config \
PCIPPC6_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx pcippc2
ZUMA_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx evb64260
ppmc7xx_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc 74xx_7xx ppmc7xx
#========================================================================
# ARM
#========================================================================
#########################################################################
## StrongARM Systems
#########################################################################
assabet_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 assabet
dnp1110_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 dnp1110
gcplus_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 gcplus
lart_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 lart
shannon_config : unconfig
@$(MKCONFIG) $(@:_config=) arm sa1100 shannon
#########################################################################
## ARM92xT Systems
#########################################################################
xtract_trab = $(subst _bigram,,$(subst _bigflash,,$(subst _old,,$(subst _config,,$1))))
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
xtract_omap730p2 = $(subst _cs0boot,,$(subst _cs3boot,, $(subst _config,,$1)))
at91cap9adk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs at91cap9adk atmel at91cap9
at91rm9200dk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t at91rm9200dk atmel at91rm9200
cmc_pu2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cmc_pu2 NULL at91rm9200
csb637_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t csb637 NULL at91rm9200
mp2usb_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mp2usb NULL at91rm9200
m501sk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t m501sk NULL at91rm9200
########################################################################
## ARM Integrator boards - see doc/README-integrator for more info.
integratorap_config \
ap_config \
ap966_config \
ap922_config \
ap922_XA10_config \
ap7_config \
ap720t_config \
ap920t_config \
ap926ejs_config \
ap946es_config: unconfig
@board/integratorap/split_by_variant.sh $@
integratorcp_config \
cp_config \
cp920t_config \
cp926ejs_config \
cp946es_config \
cp1136_config \
cp966_config \
cp922_config \
cp922_XA10_config \
cp1026_config: unconfig
@board/integratorcp/split_by_variant.sh $@
kb9202_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t kb9202 NULL at91rm9200
lpd7a400_config \
lpd7a404_config: unconfig
@$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x
mx1ads_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx
mx1fs2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t mx1fs2 NULL imx
netstar_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t netstar
omap1510inn_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn
omap5912osk_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
davinci_dvevm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
davinci_schmoogie_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
davinci_sonata_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
omap1610inn_config \
omap1610inn_cs0boot_config \
omap1610inn_cs3boot_config \
omap1610inn_cs_autoboot_config \
omap1610h2_config \
omap1610h2_cs0boot_config \
omap1610h2_cs3boot_config \
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
$(XECHO) "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS_AUTO boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
omap730p2_config \
omap730p2_cs0boot_config \
omap730p2_cs3boot_config : unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS0 boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
$(XECHO) "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
sbc2410x_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0
scb9328_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx
smdk2400_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 NULL s3c24x0
smdk2410_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t smdk2410 NULL s3c24x0
SX1_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t sx1
# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/trab
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
$(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
$(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
$(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
VCMA9_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t vcma9 mpl s3c24x0
#========================================================================
# ARM supplied Versatile development boards
#========================================================================
versatile_config \
versatileab_config \
versatilepb_config : unconfig
@board/versatile/split_by_variant.sh $@
voiceblue_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm925t voiceblue
cm4008_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm4008 NULL ks8695
cm41xx_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm920t cm41xx NULL ks8695
gth2_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_GTH2 1" >$(obj)include/config.h
@$(MKCONFIG) -a gth2 mips mips gth2
#########################################################################
## S3C44B0 Systems
#########################################################################
B2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm s3c44b0 B2 dave
#########################################################################
## ARM720T Systems
#########################################################################
armadillo_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t armadillo
ep7312_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t ep7312
impa7_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t impa7
modnet50_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t modnet50
evb4510_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t evb4510
lpc2292sodimm_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
SMN42_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
#########################################################################
## XScale Systems
#########################################################################
actux1_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux1
actux2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux2
actux3_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux3
actux4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp actux4
adsvix_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa adsvix
cerf250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa cerf250
cradle_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa cradle
csb226_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa csb226
delta_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa delta
innokom_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa innokom
ixdp425_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
ixdpg425_config : unconfig
@$(MKCONFIG) $(@:_config=) arm ixp ixdp425
lubbock_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa lubbock
pleb2_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pleb2
logodl_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa logodl
pdnb3_config \
scpu_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
$(XECHO) "... on SCPU board variant" ; \
fi
@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
pxa255_idp_config: unconfig
@$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
trizepsiv_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
wepep250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa wepep250
xaeniax_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa xaeniax
xm250_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa xm250
xsengine_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa xsengine
zylonite_config :
@$(MKCONFIG) $(@:_config=) arm pxa zylonite
#########################################################################
## ARM1136 Systems
#########################################################################
omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
apollon_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) $(@:_config=) arm arm1136 apollon
@echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk
#========================================================================
# i386
#========================================================================
#########################################################################
## AMD SC520 CDP
#########################################################################
sc520_cdp_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_cdp
sc520_spunk_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
sc520_spunk_rel_config : unconfig
@$(MKCONFIG) $(@:_config=) i386 i386 sc520_spunk
#========================================================================
# MIPS
#========================================================================
#########################################################################
## MIPS32 4Kc
#########################################################################
xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
incaip_100MHz_config \
incaip_133MHz_config \
incaip_150MHz_config \
incaip_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _133MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 133MHz system clock" ; \
}
@[ -z "$(findstring _150MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
$(XECHO) "... with 150MHz system clock" ; \
}
@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
tb0229_config: unconfig
@$(MKCONFIG) $(@:_config=) mips mips tb0229
#########################################################################
## MIPS32 AU1X00
#########################################################################
dbau1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1100_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1500_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
dbau1550_el_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h
@$(MKCONFIG) -a dbau1x00 mips mips dbau1x00
pb1000_config : unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_PB1000 1" >$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
qemu_mips_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h
@$(MKCONFIG) -a qemu-mips mips mips qemu-mips
#########################################################################
## MIPS64 5Kc
#########################################################################
purple_config : unconfig
@$(MKCONFIG) $(@:_config=) mips mips purple
#========================================================================
# Nios
#========================================================================
#########################################################################
## Nios32
#########################################################################
DK1C20_safe_32_config \
DK1C20_standard_32_config \
DK1C20_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring DK1C20_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
DK1S10_safe_32_config \
DK1S10_standard_32_config \
DK1S10_mtx_ldk_20_config \
DK1S10_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
}
@[ -z "$(findstring DK1S10_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
ADNPESC1_DNPEVA2_base_32_config \
ADNPESC1_base_32_config \
ADNPESC1_config: unconfig
@mkdir -p $(obj)include
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
$(XECHO) "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
$(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
#########################################################################
## Nios-II
#########################################################################
EP1C20_config : unconfig
@$(MKCONFIG) EP1C20 nios2 nios2 ep1c20 altera
EP1S10_config : unconfig
@$(MKCONFIG) EP1S10 nios2 nios2 ep1s10 altera
EP1S40_config : unconfig
@$(MKCONFIG) EP1S40 nios2 nios2 ep1s40 altera
PK1C20_config : unconfig
@$(MKCONFIG) PK1C20 nios2 nios2 pk1c20 psyent
PCI5441_config : unconfig
@$(MKCONFIG) PCI5441 nios2 nios2 pci5441 psyent
#========================================================================
# MicroBlaze
#========================================================================
#########################################################################
## Microblaze
#########################################################################
suzaku_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_SUZAKU 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
ml401_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_ML401 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
xupv2p_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_XUPV2P 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
#========================================================================
# Blackfin
#========================================================================
# Analog Devices boards
BFIN_BOARDS = bf533-ezkit bf533-stamp bf537-stamp bf561-ezkit
$(BFIN_BOARDS:%=%_config) : unconfig
@$(MKCONFIG) $(@:_config=) blackfin $(firstword $(subst -, ,$@)) $(@:_config=)
$(BFIN_BOARDS):
$(MAKE) $@_config
$(MAKE)
#========================================================================
# AVR32
#========================================================================
#########################################################################
## AT32AP7xxx
#########################################################################
atstk1002_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atstk1003_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atstk1004_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
atngw100_config : unconfig
@$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
#########################################################################
#########################################################################
#########################################################################
#########################################################################
## sh3 (Renesas SuperH)
#########################################################################
ms7720se_config: unconfig
@echo "#define CONFIG_MS7720SE 1" > include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh3 ms7720se
#########################################################################
## sh4 (Renesas SuperH)
#########################################################################
ms7750se_config: unconfig
@echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7750se
ms7722se_config : unconfig
@echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) sh sh4 ms7722se
#########################################################################
#########################################################################
#########################################################################
clean:
@rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \
$(obj)examples/hello_world $(obj)examples/interrupt \
$(obj)examples/mem_to_mem_idma2intr \
$(obj)examples/sched $(obj)examples/smc91111_eeprom \
$(obj)examples/test_burst $(obj)examples/timer
@rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \
$(obj)tools/env/{fw_printenv,fw_setenv} \
$(obj)tools/envcrc \
$(obj)tools/gdb/{astest,gdbcont,gdbsend} \
$(obj)tools/gen_eth_addr $(obj)tools/img2srec \
$(obj)tools/mkimage $(obj)tools/mpc86x_clk \
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \
$(obj)board/{integratorap,integratorcp}/u-boot.lds \
$(obj)board/{bf533-ezkit,bf533-stamp,bf537-stamp,bf561-ezkit}/u-boot.lds
@rm -f $(obj)include/bmp_logo.h $(obj)nand_spl/{u-boot-spl,u-boot-spl.map}
@rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl.map}
@rm -f $(obj)api_examples/demo $(VERSION_FILE)
@find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
clobber: clean
@find $(OBJTREE) -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
@rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \
$(obj)cscope.* $(obj)*.*~
@rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
@rm -f $(obj)tools/{crc32.c,environment.c,env/crc32.c,sha1.c,inca-swap-bytes}
@rm -f $(obj)cpu/mpc824x/bedbug_603e.c
@rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
@[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
@[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -lname "*" -print | xargs rm -f
@[ ! -d $(obj)api_examples ] || find $(obj)api_examples -lname "*" -print | xargs rm -f
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
distclean: clobber unconfig
else
mrproper \
distclean: clobber unconfig
rm -rf $(obj)*
endif
backup:
F=`basename $(TOPDIR)` ; cd .. ; \
gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
#########################################################################
Reference in New Issue View Git Blame Copy Permalink