u-boot/configs/imx8mn_bsh_smm_s2_defconfig
Tom Rini a2aa7d6550 Merge commit 'ac30d240dbb520d0980f0687630feb702a14f51a' of https://source.denx.de/u-boot/custodians/u-boot-nand-flash into next
Re-sync again on some linux part, add some fixes for fsl_elbc from
Pali and switch
imx8mn bsh to use nand base ident

For nand subsystem tested on:
 - imx8mn  Macronix MX30LF4G18AC
 - P2020 based board Turris 1.1 for fsl_elbc
2022-08-24 17:30:29 -04:00

118 lines
3.1 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_IMX8M=y
CONFIG_SYS_TEXT_BASE=0x40200000
CONFIG_SYS_MALLOC_LEN=0x2000000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx8mn-bsh-smm-s2"
CONFIG_SPL_TEXT_BASE=0x912000
CONFIG_TARGET_IMX8MN_BSH_SMM_S2=y
CONFIG_SYS_PROMPT="> "
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_DEFAULT_FDT_FILE="freescale/imx8mn-bsh-smm-s2.dtb"
CONFIG_ARCH_MISC_INIT=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_SPL_MAX_SIZE=0x25000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x950000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0x980000
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
CONFIG_SPL_DMA=y
CONFIG_SPL_I2C=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SPL_NAND_IDENT=y
CONFIG_SPL_POWER=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_CBSIZE=2048
CONFIG_SYS_PBSIZE=2067
CONFIG_SYS_BOOTM_LEN=0x2000000
CONFIG_CMD_FUSE=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
CONFIG_MTDPARTS_DEFAULT="gpmi-nand:64m(nandboot),16m(nandfit),32m(nandkernel),1m(nanddtb),8m(nandtee),-(nandrootfs)"
CONFIG_CMD_UBI=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SPL_DM=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_CLK_IMX8MN=y
CONFIG_CLK_IMX8MN=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x40480000
CONFIG_FASTBOOT_BUF_SIZE=0x20000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_UUU_SUPPORT=y
CONFIG_MXC_GPIO=y
CONFIG_DM_I2C=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_DM_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_SYS_NAND_USE_FLASH_BBT=y
CONFIG_NAND_MXS=y
CONFIG_NAND_MXS_DT=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0xD8000
CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x4058000
CONFIG_PHYLIB=y
CONFIG_PHY_NXP_TJA11XX=y
CONFIG_FEC_MXC=y
CONFIG_MII=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_PINCTRL_IMX8M=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_BD71837=y
CONFIG_SPL_DM_PMIC_BD71837=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_SYSRESET=y
CONFIG_SYSRESET_PSCI=y
CONFIG_SYSRESET_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
CONFIG_CI_UDC=y
CONFIG_IMX_WATCHDOG=y
# CONFIG_FAT_WRITE is not set
CONFIG_OF_LIBFDT_OVERLAY=y