u-boot/configs/imx6q_bosch_acc_defconfig
Tom Rini 1247c35c80 configs: Resync with savedefconfig
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-08-23 15:24:14 -04:00

109 lines
2.8 KiB
Plaintext

CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x17780000
CONFIG_SYS_MALLOC_LEN=0x01000000
CONFIG_SYS_MALLOC_F_LEN=0x9000
CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x1fe000
CONFIG_MX6QDL=y
CONFIG_MX6_DDRCAL=y
CONFIG_TARGET_MX6Q_ACC=y
CONFIG_DEFAULT_DEVICE_TREE="imx6q-bosch-acc"
CONFIG_SPL_TEXT_BASE=0x00908000
CONFIG_SPL_MMC=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_BOOTCOUNT_BOOTLIMIT=8
CONFIG_SPL_SIZE_LIMIT=69632
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x1ff000
CONFIG_IMX_HAB=y
# CONFIG_CMD_BMODE is not set
# CONFIG_CMD_DEKBLOB is not set
CONFIG_BUILD_TARGET=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run mmc_mmc_fit"
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SYS_SPL_MALLOC=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xaa
# CONFIG_SPL_CRC32 is not set
# CONFIG_SPL_CRYPTO is not set
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_BOOTD is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_FDT is not set
# CONFIG_CMD_GO is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_EXPORTENV is not set
# CONFIG_CMD_IMPORTENV is not set
# CONFIG_CMD_ENV_EXISTS is not set
# CONFIG_CMD_CRC32 is not set
# CONFIG_CMD_MEMORY is not set
# CONFIG_CMD_FUSE is not set
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
# CONFIG_CMD_PINMUX is not set
# CONFIG_CMD_ECHO is not set
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SOURCE is not set
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NET is not set
# CONFIG_CMD_BLOCK_CACHE is not set
# CONFIG_CMD_SLEEP is not set
# CONFIG_CMD_MP is not set
# CONFIG_CMD_HASH is not set
CONFIG_CMD_EXT4=y
CONFIG_DOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_MULTI_DTB_FIT=y
CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clocks clock-names interrupt-parent"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_NOWHERE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_SYS_MMC_ENV_PART=1
CONFIG_ENV_APPEND=y
CONFIG_ENV_WRITEABLE_LIST=y
CONFIG_ENV_ACCESS_IGNORE_FORCE=y
CONFIG_VERSION_VARIABLE=y
CONFIG_TFTP_BLOCKSIZE=512
CONFIG_SPL_DM=y
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_DM_BOOTCOUNT=y
CONFIG_DM_BOOTCOUNT_PMIC_PFUZE100=y
CONFIG_SYS_I2C_MXC=y
CONFIG_SUPPORT_EMMC_BOOT=y
CONFIG_FSL_USDHC=y
CONFIG_PHYLIB=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_PFUZE100=y
CONFIG_DM_SERIAL=y
CONFIG_MXC_UART=y
CONFIG_WATCHDOG_TIMEOUT_MSECS=60000
CONFIG_IMX_WATCHDOG=y
CONFIG_WDT=y
CONFIG_EXT4_WRITE=y
CONFIG_FS_FAT=y
CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y
# CONFIG_EFI_LOADER is not set