Files
u-boot/arch/arm/dts
Lokesh Vutla c88a9ae1fe arm: dts: am642-sk: Add initial sk dts
AM642 StarterKit (SK) board is a low cost, small form factor board
designed for TI’s AM642 SoC. It supports the following interfaces:
* 2 GB LPDDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in switch and MAC mode
* x1 USB 3.0 Type-A port
* x1 UHS-1 capable µSD card slot
* 2.4/5 GHz WLAN + Bluetooth 4.2 through WL1837
* 512 Mbit OSPI flash
* x2 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin Raspberry Pi compatible GPIO header
* 24-pin header for peripherals in MCU island (I2C, UART, SPI, IO)
* 54-pin header for Programmable Realtime Unit (PRU) IO pins
* Interface for remote automation. Includes:
	* power measurement and reset control
	* boot mode change

Add basic support for AM642 SK.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-05-12 16:36:38 +05:30
..
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2018-09-10 20:48:18 -04:00
2019-10-11 10:09:16 -04:00
2020-01-23 07:29:58 -05:00
2018-08-06 11:24:45 +09:00
2019-10-08 16:35:59 +02:00
2019-10-08 16:35:59 +02:00
2019-10-08 16:33:45 +02:00
2019-10-08 16:33:45 +02:00
2019-10-08 16:33:45 +02:00
2019-10-08 16:33:45 +02:00
2020-01-07 10:26:56 +01:00
2021-03-01 10:21:36 +01:00
2021-02-08 14:01:19 +05:30
2020-08-24 14:11:31 -04:00
2021-03-20 16:24:27 -04:00
2019-02-19 16:58:23 -05:00
2020-10-22 09:54:54 -04:00
2019-04-17 14:34:45 +05:30
2018-09-10 20:48:18 -04:00
2019-07-29 00:09:19 +02:00
2020-10-27 08:01:36 +01:00
2021-03-30 12:03:24 +02:00