d55b7d4c53
With the full PMIC framework we may be able to avoid this. But for now we need access to the PMIC. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
275 lines
5.1 KiB
C
275 lines
5.1 KiB
C
/*
|
|
* Copyright (C) 2014 NVIDIA Corporation
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "as3722: " fmt
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <fdtdec.h>
|
|
#include <i2c.h>
|
|
|
|
#include <power/as3722.h>
|
|
|
|
#define AS3722_SD_VOLTAGE(n) (0x00 + (n))
|
|
#define AS3722_GPIO_CONTROL(n) (0x08 + (n))
|
|
#define AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH (1 << 0)
|
|
#define AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL (7 << 0)
|
|
#define AS3722_GPIO_CONTROL_INVERT (1 << 7)
|
|
#define AS3722_LDO_VOLTAGE(n) (0x10 + (n))
|
|
#define AS3722_GPIO_SIGNAL_OUT 0x20
|
|
#define AS3722_SD_CONTROL 0x4d
|
|
#define AS3722_LDO_CONTROL 0x4e
|
|
#define AS3722_ASIC_ID1 0x90
|
|
#define AS3722_DEVICE_ID 0x0c
|
|
#define AS3722_ASIC_ID2 0x91
|
|
|
|
int as3722_read(struct udevice *pmic, u8 reg, u8 *value)
|
|
{
|
|
int err;
|
|
|
|
err = dm_i2c_read(pmic, reg, value, 1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_write(struct udevice *pmic, u8 reg, u8 value)
|
|
{
|
|
int err;
|
|
|
|
err = dm_i2c_write(pmic, reg, &value, 1);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int as3722_read_id(struct udevice *pmic, u8 *id, u8 *revision)
|
|
{
|
|
int err;
|
|
|
|
err = as3722_read(pmic, AS3722_ASIC_ID1, id);
|
|
if (err) {
|
|
error("failed to read ID1 register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
err = as3722_read(pmic, AS3722_ASIC_ID2, revision);
|
|
if (err) {
|
|
error("failed to read ID2 register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_sd_enable(struct udevice *pmic, unsigned int sd)
|
|
{
|
|
u8 value;
|
|
int err;
|
|
|
|
if (sd > 6)
|
|
return -EINVAL;
|
|
|
|
err = as3722_read(pmic, AS3722_SD_CONTROL, &value);
|
|
if (err) {
|
|
error("failed to read SD control register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
value |= 1 << sd;
|
|
|
|
err = as3722_write(pmic, AS3722_SD_CONTROL, value);
|
|
if (err < 0) {
|
|
error("failed to write SD control register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_sd_set_voltage(struct udevice *pmic, unsigned int sd, u8 value)
|
|
{
|
|
int err;
|
|
|
|
if (sd > 6)
|
|
return -EINVAL;
|
|
|
|
err = as3722_write(pmic, AS3722_SD_VOLTAGE(sd), value);
|
|
if (err < 0) {
|
|
error("failed to write SD%u voltage register: %d", sd, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_ldo_enable(struct udevice *pmic, unsigned int ldo)
|
|
{
|
|
u8 value;
|
|
int err;
|
|
|
|
if (ldo > 11)
|
|
return -EINVAL;
|
|
|
|
err = as3722_read(pmic, AS3722_LDO_CONTROL, &value);
|
|
if (err) {
|
|
error("failed to read LDO control register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
value |= 1 << ldo;
|
|
|
|
err = as3722_write(pmic, AS3722_LDO_CONTROL, value);
|
|
if (err < 0) {
|
|
error("failed to write LDO control register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_ldo_set_voltage(struct udevice *pmic, unsigned int ldo, u8 value)
|
|
{
|
|
int err;
|
|
|
|
if (ldo > 11)
|
|
return -EINVAL;
|
|
|
|
err = as3722_write(pmic, AS3722_LDO_VOLTAGE(ldo), value);
|
|
if (err < 0) {
|
|
error("failed to write LDO%u voltage register: %d", ldo,
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_gpio_configure(struct udevice *pmic, unsigned int gpio,
|
|
unsigned long flags)
|
|
{
|
|
u8 value = 0;
|
|
int err;
|
|
|
|
if (flags & AS3722_GPIO_OUTPUT_VDDH)
|
|
value |= AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
|
|
|
|
if (flags & AS3722_GPIO_INVERT)
|
|
value |= AS3722_GPIO_CONTROL_INVERT;
|
|
|
|
err = as3722_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
|
|
if (err) {
|
|
error("failed to configure GPIO#%u: %d", gpio, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int as3722_gpio_set(struct udevice *pmic, unsigned int gpio,
|
|
unsigned int level)
|
|
{
|
|
const char *l;
|
|
u8 value;
|
|
int err;
|
|
|
|
if (gpio > 7)
|
|
return -EINVAL;
|
|
|
|
err = as3722_read(pmic, AS3722_GPIO_SIGNAL_OUT, &value);
|
|
if (err < 0) {
|
|
error("failed to read GPIO signal out register: %d", err);
|
|
return err;
|
|
}
|
|
|
|
if (level == 0) {
|
|
value &= ~(1 << gpio);
|
|
l = "low";
|
|
} else {
|
|
value |= 1 << gpio;
|
|
l = "high";
|
|
}
|
|
|
|
err = as3722_write(pmic, AS3722_GPIO_SIGNAL_OUT, value);
|
|
if (err) {
|
|
error("failed to set GPIO#%u %s: %d", gpio, l, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int as3722_gpio_direction_output(struct udevice *pmic, unsigned int gpio,
|
|
unsigned int level)
|
|
{
|
|
u8 value;
|
|
int err;
|
|
|
|
if (gpio > 7)
|
|
return -EINVAL;
|
|
|
|
if (level == 0)
|
|
value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDL;
|
|
else
|
|
value = AS3722_GPIO_CONTROL_MODE_OUTPUT_VDDH;
|
|
|
|
err = as3722_write(pmic, AS3722_GPIO_CONTROL(gpio), value);
|
|
if (err) {
|
|
error("failed to configure GPIO#%u as output: %d", gpio, err);
|
|
return err;
|
|
}
|
|
|
|
err = as3722_gpio_set(pmic, gpio, level);
|
|
if (err < 0) {
|
|
error("failed to set GPIO#%u high: %d", gpio, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Temporary function until we get the pmic framework */
|
|
int as3722_get(struct udevice **devp)
|
|
{
|
|
int bus = 0;
|
|
int address = 0x40;
|
|
|
|
return i2c_get_chip_for_busnum(bus, address, 1, devp);
|
|
}
|
|
|
|
int as3722_init(struct udevice **devp)
|
|
{
|
|
struct udevice *pmic;
|
|
u8 id, revision;
|
|
const unsigned int bus = 0;
|
|
const unsigned int address = 0x40;
|
|
int err;
|
|
|
|
err = i2c_get_chip_for_busnum(bus, address, 1, &pmic);
|
|
if (err)
|
|
return err;
|
|
err = as3722_read_id(pmic, &id, &revision);
|
|
if (err < 0) {
|
|
error("failed to read ID: %d", err);
|
|
return err;
|
|
}
|
|
|
|
if (id != AS3722_DEVICE_ID) {
|
|
error("unknown device");
|
|
return -ENOENT;
|
|
}
|
|
|
|
debug("AS3722 revision %#x found on I2C bus %u, address %#x\n",
|
|
revision, bus, address);
|
|
if (devp)
|
|
*devp = pmic;
|
|
|
|
return 0;
|
|
}
|