u-boot/drivers/net/Makefile
Purna Chandra Mandal 23e7578c9b drivers: net: Add ethernet driver for Microchip PIC32.
This driver implements MAC and MII layer of the ethernet controller.
Network data transfer is handled by controller internal DMA engine.
Ethernet controller is configurable through device-tree file.

Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com>
2016-02-01 22:14:02 +01:00

76 lines
2.8 KiB
Makefile

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_PPC4xx_EMAC) += 4xx_enet.o
obj-$(CONFIG_ALTERA_TSE) += altera_tse.o
obj-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
obj-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
obj-$(CONFIG_DRIVER_AX88180) += ax88180.o
obj-$(CONFIG_BCM_SF2_ETH) += bcm-sf2-eth.o
obj-$(CONFIG_BCM_SF2_ETH_GMAC) += bcm-sf2-eth-gmac.o
obj-$(CONFIG_BFIN_MAC) += bfin_mac.o
obj-$(CONFIG_CALXEDA_XGMAC) += calxedaxgmac.o
obj-$(CONFIG_CS8900) += cs8900.o
obj-$(CONFIG_TULIP) += dc2114x.o
obj-$(CONFIG_ETH_DESIGNWARE) += designware.o
obj-$(CONFIG_DRIVER_DM9000) += dm9000x.o
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_E1000) += e1000.o
obj-$(CONFIG_E1000_SPI) += e1000_spi.o
obj-$(CONFIG_EEPRO100) += eepro100.o
obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_EP93XX) += ep93xx_eth.o
obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_FEC_MXC) += fec_mxc.o
obj-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
obj-$(CONFIG_FTGMAC100) += ftgmac100.o
obj-$(CONFIG_FTMAC110) += ftmac110.o
obj-$(CONFIG_FTMAC100) += ftmac100.o
obj-$(CONFIG_GRETH) += greth.o
obj-$(CONFIG_DRIVER_TI_KEYSTONE_NET) += keystone_net.o
obj-$(CONFIG_KS8851_MLL) += ks8851_mll.o
obj-$(CONFIG_LAN91C96) += lan91c96.o
obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o
obj-$(CONFIG_MACB) += macb.o
obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o
obj-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o
obj-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o
obj-$(CONFIG_MVGBE) += mvgbe.o
obj-$(CONFIG_MVNETA) += mvneta.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_NS8382X) += ns8382x.o
obj-$(CONFIG_PCH_GBE) += pch_gbe.o
obj-$(CONFIG_PCNET) += pcnet.o
obj-$(CONFIG_RTL8139) += rtl8139.o
obj-$(CONFIG_RTL8169) += rtl8169.o
obj-$(CONFIG_ETH_SANDBOX) += sandbox.o
obj-$(CONFIG_ETH_SANDBOX_RAW) += sandbox-raw.o
obj-$(CONFIG_SH_ETHER) += sh_eth.o
obj-$(CONFIG_SMC91111) += smc91111.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
obj-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
obj-$(CONFIG_DRIVER_TI_CPSW) += cpsw.o
obj-$(CONFIG_FMAN_ENET) += fsl_mdio.o
obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
obj-$(CONFIG_ULI526X) += uli526x.o
obj-$(CONFIG_VSC7385_ENET) += vsc7385.o
obj-$(CONFIG_XILINX_AXIEMAC) += xilinx_axi_emac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
obj-$(CONFIG_XILINX_LL_TEMAC) += xilinx_ll_temac.o xilinx_ll_temac_mdio.o \
xilinx_ll_temac_fifo.o xilinx_ll_temac_sdma.o
obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/
obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/
obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o
obj-$(CONFIG_VSC9953) += vsc9953.o
obj-$(CONFIG_PIC32_ETH) += pic32_mdio.o pic32_eth.o