leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b8ce6fe261
u-boot/board/solidrun/mx6cuboxi
History
Fabio Estevam b8ce6fe261 mx6: Add initial SPL support for HummingBoard-i2eX 
Add the initial SPL support for HummingBoard-i2eX, which is based on a
MX6 Dual.

For more information about HummingBoard, please check:
http://www.solid-run.com/products/hummingboard/

Based on the work from Jon Nettleton and Rabeeh Khoury.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-04-22 14:39:06 +02:00
..
Kconfig mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00
MAINTAINERS mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00
Makefile mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00
mx6cuboxi.c mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00
README mx6: Add initial SPL support for HummingBoard-i2eX 2015-04-22 14:39:06 +02:00

README 

How to use U-boot on Solid-run mx6 hummingboard
-----------------------------------------------

- Build U-boot for hummingboard:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the hummingboard, power it up and U-boot messages
should come up.