eb45787b39
This adds support to Intel Cherry Hill board, a board based on Intel Braswell SoC. The following devices are validated: - serial port as the serial console - on-board Realtek 8169 ethernet controller - SATA AHCI controller - EMMC/SDHC controller - USB 3.0 xHCI controller - PCIe x1 slot with a graphics card - ICH SPI controller with an 8MB Macronix SPI flash - Integrated graphics device as the video console Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
89 lines
3.1 KiB
Plaintext
89 lines
3.1 KiB
Plaintext
#
|
|
# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
if VENDOR_INTEL
|
|
|
|
choice
|
|
prompt "Mainboard model"
|
|
optional
|
|
|
|
config TARGET_BAYLEYBAY
|
|
bool "Bayley Bay"
|
|
help
|
|
This is the Intel Bayley Bay Customer Reference Board. It contains an
|
|
Intel quad-core Atom Processor E3800 with dual-channel DDR3L SODIMM
|
|
4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
|
|
PCIe and some other sensor interfaces.
|
|
|
|
config TARGET_CHERRYHILL
|
|
bool "Cherry Hill"
|
|
help
|
|
This is the Intel Cherry Hill Customer Reference Board. It is in a
|
|
mini-ITX form factor containing the Intel Braswell SoC, which has
|
|
a 64-bit quad-core, single-thread, Intel Atom processor, along with
|
|
serial console, 10/100/1000 Ethernet, SD-Card, USB 2/3, SATA, PCIe,
|
|
some GPIOs, one HDMI and two DP video out.
|
|
|
|
config TARGET_COUGARCANYON2
|
|
bool "Cougar Canyon 2"
|
|
help
|
|
This is the Intel Cougar Canyon 2 Customer Reference Board. It
|
|
is built on the Chief River platform with Intel Ivybridge Processor
|
|
and Panther Point chipset. The board has 4GB RAM, with some other
|
|
peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI.
|
|
|
|
config TARGET_CROWNBAY
|
|
bool "Crown Bay"
|
|
help
|
|
This is the Intel Crown Bay Customer Reference Board. It contains
|
|
the Intel Atom Processor E6xx populated on the COM Express module
|
|
with 1GB DDR2 soldered down memory and a carrier board with the
|
|
Intel Platform Controller Hub EG20T, other system components and
|
|
peripheral connectors for PCIe/SATA/USB/LAN/SD/UART/Audio/LVDS.
|
|
|
|
config TARGET_EDISON
|
|
bool "Edison"
|
|
help
|
|
This is the Intel Edison Compute Module. It contains a dual core Intel
|
|
Atom Tangier CPU, 1 GB RAM integrated on package. There is also 4 GB
|
|
eMMC flash on board, Wi-Fi, Bluetooth 4 and USB controllers.
|
|
|
|
config TARGET_GALILEO
|
|
bool "Galileo"
|
|
help
|
|
This is the Intel Galileo board, which is the first in a family of
|
|
Arduino-certified development and prototyping boards based on Intel
|
|
architecture. It includes an Intel Quark SoC X1000 processor, a 32-bit
|
|
single-core, single-thread, Intel Pentium processor instrunction set
|
|
architecture (ISA) compatible, operating at speeds up to 400Mhz,
|
|
along with 256MB DDR3 memory. It supports a wide range of industry
|
|
standard I/O interfaces, including a full-sized mini-PCIe slot,
|
|
one 100Mb Ethernet port, a microSD card slot, a USB host port and
|
|
a USB client port.
|
|
|
|
config TARGET_MINNOWMAX
|
|
bool "Minnowboard MAX"
|
|
help
|
|
This is the Intel Minnowboard MAX. It contains an Atom E3800
|
|
processor in a small form factor with Ethernet, micro-SD, USB 2,
|
|
USB 3, SATA, serial console, some GPIOs and HDMI 1.3 video out.
|
|
It requires some binary blobs - see README.x86 for details.
|
|
|
|
Note that PCIE_ECAM_BASE is set up by the FSP so the value used
|
|
by U-Boot matches that value.
|
|
|
|
endchoice
|
|
|
|
source "board/intel/bayleybay/Kconfig"
|
|
source "board/intel/cherryhill/Kconfig"
|
|
source "board/intel/cougarcanyon2/Kconfig"
|
|
source "board/intel/crownbay/Kconfig"
|
|
source "board/intel/edison/Kconfig"
|
|
source "board/intel/galileo/Kconfig"
|
|
source "board/intel/minnowmax/Kconfig"
|
|
|
|
endif
|