4d7de5c508
Enabling DM_PMIC, DM_REGULATOR_FIXED, and DM_REGULATOR_GPIO gives us the ability to better monitor voltages and enable hardware through the device tree. The TL4030 (TPS65950) is not yet migrated to DM, so this patch only enables the fixed and GPIO controlled regulators. Based on commit [1][2]. [1]a40d3cc845[2]2448e42d73Signed-off-by: Romain Naour <romain.naour@gmail.com>
114 lines
3.0 KiB
Plaintext
114 lines
3.0 KiB
Plaintext
CONFIG_ARM=y
|
|
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
|
|
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
|
CONFIG_ARCH_OMAP2PLUS=y
|
|
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
|
|
CONFIG_SPL_TEXT_BASE=0x40200000
|
|
CONFIG_TARGET_OMAP3_BEAGLE=y
|
|
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
|
|
CONFIG_SPL=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
|
|
CONFIG_USE_PREBOOT=y
|
|
CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
|
CONFIG_SPL_SEPARATE_BSS=y
|
|
# CONFIG_SPL_FS_EXT4 is not set
|
|
CONFIG_SPL_MTD_SUPPORT=y
|
|
CONFIG_SPL_NAND_DRIVERS=y
|
|
CONFIG_SPL_NAND_ECC=y
|
|
CONFIG_SPL_NAND_SIMPLE=y
|
|
CONFIG_SPL_NAND_BASE=y
|
|
CONFIG_SYS_PROMPT="BeagleBoard # "
|
|
CONFIG_CMD_SPL=y
|
|
CONFIG_CMD_SPL_NAND_OFS=0x280000
|
|
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
|
|
CONFIG_CMD_ASKENV=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_NAND=y
|
|
CONFIG_CMD_NAND_TRIMFFS=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FS_UUID=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
|
|
CONFIG_CMD_UBI=y
|
|
# CONFIG_ISO_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_SPL_PARTITION_UUIDS=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
|
|
CONFIG_ENV_OVERWRITE=y
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_SPL_OF_TRANSLATE=y
|
|
CONFIG_USB_FUNCTION_FASTBOOT=y
|
|
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
|
|
CONFIG_SYS_I2C_LEGACY=y
|
|
CONFIG_SPL_SYS_I2C_LEGACY=y
|
|
CONFIG_LED_STATUS=y
|
|
CONFIG_LED_STATUS0=y
|
|
CONFIG_LED_STATUS_BIT=1
|
|
CONFIG_LED_STATUS_STATE=2
|
|
CONFIG_LED_STATUS1=y
|
|
CONFIG_LED_STATUS_BIT1=2
|
|
CONFIG_LED_STATUS_STATE1=2
|
|
CONFIG_LED_STATUS_BOOT_ENABLE=y
|
|
CONFIG_LED_STATUS_BOOT=1
|
|
CONFIG_LED_STATUS_GREEN_ENABLE=y
|
|
CONFIG_LED_STATUS_GREEN=2
|
|
CONFIG_LED_STATUS_CMD=y
|
|
CONFIG_TWL4030_LED=y
|
|
CONFIG_MMC_OMAP_HS=y
|
|
CONFIG_MTD=y
|
|
CONFIG_MTD_RAW_NAND=y
|
|
CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
|
|
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
|
|
CONFIG_SYS_NAND_PAGE_COUNT=0x40
|
|
CONFIG_SYS_NAND_PAGE_SIZE=0x800
|
|
CONFIG_SYS_NAND_OOBSIZE=0x40
|
|
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
|
|
CONFIG_DM_ETH=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_SINGLE=y
|
|
CONFIG_DM_PMIC=y
|
|
# CONFIG_SPL_PMIC_CHILDREN is not set
|
|
CONFIG_DM_REGULATOR=y
|
|
CONFIG_DM_REGULATOR_FIXED=y
|
|
CONFIG_DM_REGULATOR_GPIO=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_OMAP3_SPI=y
|
|
CONFIG_USB=y
|
|
# CONFIG_SPL_DM_USB is not set
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OMAP3=y
|
|
CONFIG_USB_MUSB_GADGET=y
|
|
CONFIG_USB_MUSB_OMAP2PLUS=y
|
|
CONFIG_TWL4030_USB=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="TI"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
|
|
CONFIG_USB_ETHER=y
|
|
CONFIG_VIDEO_OMAP3=y
|
|
CONFIG_BCH=y
|