u-boot/drivers/spi/mt7621_spi.c
Simon Glass cd93d625fd common: Drop linux/bitops.h from common header
Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-05-18 21:19:23 -04:00

310 lines
6.9 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Stefan Roese <sr@denx.de>
*
* Derived from the Linux driver version drivers/spi/spi-mt7621.c
* Copyright (C) 2011 Sergiy <piratfm@gmail.com>
* Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2014-2015 Felix Fietkau <nbd@nbd.name>
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <log.h>
#include <spi.h>
#include <wait_bit.h>
#include <linux/bitops.h>
#include <linux/io.h>
#define MT7621_RX_FIFO_LEN 32
#define MT7621_TX_FIFO_LEN 36
#define MT7621_SPI_TRANS 0x00
#define MT7621_SPI_TRANS_START BIT(8)
#define MT7621_SPI_TRANS_BUSY BIT(16)
#define TRANS_ADDR_SZ GENMASK(20, 19)
#define TRANS_ADDR_SZ_SHIFT 19
#define TRANS_MOSI_BCNT GENMASK(3, 0)
#define TRANS_MOSI_BCNT_SHIFT 0
#define MT7621_SPI_OPCODE 0x04
#define MT7621_SPI_DATA0 0x08
#define MT7621_SPI_DATA4 0x18
#define MT7621_SPI_MASTER 0x28
#define MT7621_SPI_MOREBUF 0x2c
#define MT7621_SPI_POLAR 0x38
#define MT7621_LSB_FIRST BIT(3)
#define MT7621_CPOL BIT(4)
#define MT7621_CPHA BIT(5)
#define MASTER_MORE_BUFMODE BIT(2)
#define MASTER_RS_CLK_SEL GENMASK(27, 16)
#define MASTER_RS_CLK_SEL_SHIFT 16
#define MASTER_RS_SLAVE_SEL GENMASK(31, 29)
#define MOREBUF_CMD_CNT GENMASK(29, 24)
#define MOREBUF_CMD_CNT_SHIFT 24
#define MOREBUF_MISO_CNT GENMASK(20, 12)
#define MOREBUF_MISO_CNT_SHIFT 12
#define MOREBUF_MOSI_CNT GENMASK(8, 0)
#define MOREBUF_MOSI_CNT_SHIFT 0
struct mt7621_spi {
void __iomem *base;
unsigned int sys_freq;
};
static void mt7621_spi_set_cs(struct mt7621_spi *rs, int cs, int enable)
{
debug("%s: cs#%d -> %s\n", __func__, cs, enable ? "enable" : "disable");
if (enable) {
setbits_le32(rs->base + MT7621_SPI_MASTER,
MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE);
iowrite32(BIT(cs), rs->base + MT7621_SPI_POLAR);
} else {
iowrite32(0, rs->base + MT7621_SPI_POLAR);
iowrite32((2 << TRANS_ADDR_SZ_SHIFT) |
(1 << TRANS_MOSI_BCNT_SHIFT),
rs->base + MT7621_SPI_TRANS);
clrbits_le32(rs->base + MT7621_SPI_MASTER,
MASTER_RS_SLAVE_SEL | MASTER_MORE_BUFMODE);
}
}
static int mt7621_spi_set_mode(struct udevice *bus, uint mode)
{
struct mt7621_spi *rs = dev_get_priv(bus);
u32 reg;
debug("%s: mode=0x%08x\n", __func__, mode);
reg = ioread32(rs->base + MT7621_SPI_MASTER);
reg &= ~MT7621_LSB_FIRST;
if (mode & SPI_LSB_FIRST)
reg |= MT7621_LSB_FIRST;
reg &= ~(MT7621_CPHA | MT7621_CPOL);
switch (mode & (SPI_CPOL | SPI_CPHA)) {
case SPI_MODE_0:
break;
case SPI_MODE_1:
reg |= MT7621_CPHA;
break;
case SPI_MODE_2:
reg |= MT7621_CPOL;
break;
case SPI_MODE_3:
reg |= MT7621_CPOL | MT7621_CPHA;
break;
}
iowrite32(reg, rs->base + MT7621_SPI_MASTER);
return 0;
}
static int mt7621_spi_set_speed(struct udevice *bus, uint speed)
{
struct mt7621_spi *rs = dev_get_priv(bus);
u32 rate;
u32 reg;
debug("%s: speed=%d\n", __func__, speed);
rate = DIV_ROUND_UP(rs->sys_freq, speed);
debug("rate:%u\n", rate);
if (rate > 4097)
return -EINVAL;
if (rate < 2)
rate = 2;
reg = ioread32(rs->base + MT7621_SPI_MASTER);
reg &= ~MASTER_RS_CLK_SEL;
reg |= (rate - 2) << MASTER_RS_CLK_SEL_SHIFT;
iowrite32(reg, rs->base + MT7621_SPI_MASTER);
return 0;
}
static inline int mt7621_spi_wait_till_ready(struct mt7621_spi *rs)
{
int ret;
ret = wait_for_bit_le32(rs->base + MT7621_SPI_TRANS,
MT7621_SPI_TRANS_BUSY, 0, 10, 0);
if (ret)
pr_err("Timeout in %s!\n", __func__);
return ret;
}
static int mt7621_spi_read(struct mt7621_spi *rs, u8 *buf, size_t len)
{
size_t rx_len;
int i, ret;
u32 val = 0;
while (len) {
rx_len = min_t(size_t, len, MT7621_RX_FIFO_LEN);
iowrite32((rx_len * 8) << MOREBUF_MISO_CNT_SHIFT,
rs->base + MT7621_SPI_MOREBUF);
iowrite32(MT7621_SPI_TRANS_START, rs->base + MT7621_SPI_TRANS);
ret = mt7621_spi_wait_till_ready(rs);
if (ret)
return ret;
for (i = 0; i < rx_len; i++) {
if ((i % 4) == 0)
val = ioread32(rs->base + MT7621_SPI_DATA0 + i);
*buf++ = val & 0xff;
val >>= 8;
}
len -= rx_len;
}
return ret;
}
static int mt7621_spi_write(struct mt7621_spi *rs, const u8 *buf, size_t len)
{
size_t tx_len, opcode_len, dido_len;
int i, ret;
u32 val;
while (len) {
tx_len = min_t(size_t, len, MT7621_TX_FIFO_LEN);
opcode_len = min_t(size_t, tx_len, 4);
dido_len = tx_len - opcode_len;
val = 0;
for (i = 0; i < opcode_len; i++) {
val <<= 8;
val |= *buf++;
}
iowrite32(val, rs->base + MT7621_SPI_OPCODE);
val = 0;
for (i = 0; i < dido_len; i++) {
val |= (*buf++) << ((i % 4) * 8);
if ((i % 4 == 3) || (i == dido_len - 1)) {
iowrite32(val, rs->base + MT7621_SPI_DATA0 +
(i & ~3));
val = 0;
}
}
iowrite32(((opcode_len * 8) << MOREBUF_CMD_CNT_SHIFT) |
((dido_len * 8) << MOREBUF_MOSI_CNT_SHIFT),
rs->base + MT7621_SPI_MOREBUF);
iowrite32(MT7621_SPI_TRANS_START, rs->base + MT7621_SPI_TRANS);
ret = mt7621_spi_wait_till_ready(rs);
if (ret)
return ret;
len -= tx_len;
}
return 0;
}
static int mt7621_spi_xfer(struct udevice *dev, unsigned int bitlen,
const void *dout, void *din, unsigned long flags)
{
struct udevice *bus = dev->parent;
struct mt7621_spi *rs = dev_get_priv(bus);
int total_size = bitlen >> 3;
int ret = 0;
debug("%s: dout=%p, din=%p, len=%x, flags=%lx\n", __func__, dout, din,
total_size, flags);
/*
* This driver only supports half-duplex, so complain and bail out
* upon full-duplex messages
*/
if (dout && din) {
printf("Only half-duplex SPI transfer supported\n");
return -EIO;
}
mt7621_spi_wait_till_ready(rs);
/*
* Set CS active upon start of SPI message. This message can
* be split upon multiple calls to this xfer function
*/
if (flags & SPI_XFER_BEGIN)
mt7621_spi_set_cs(rs, spi_chip_select(dev), 1);
if (din)
ret = mt7621_spi_read(rs, din, total_size);
else if (dout)
ret = mt7621_spi_write(rs, dout, total_size);
if (flags & SPI_XFER_END)
mt7621_spi_set_cs(rs, spi_chip_select(dev), 0);
return ret;
}
static int mt7621_spi_probe(struct udevice *dev)
{
struct mt7621_spi *rs = dev_get_priv(dev);
struct clk clk;
int ret;
rs->base = dev_remap_addr(dev);
if (!rs->base)
return -EINVAL;
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0) {
printf("Please provide a clock!\n");
return ret;
}
clk_enable(&clk);
rs->sys_freq = clk_get_rate(&clk);
if (!rs->sys_freq) {
printf("Please provide a valid clock!\n");
return -EINVAL;
}
return 0;
}
static const struct dm_spi_ops mt7621_spi_ops = {
.set_mode = mt7621_spi_set_mode,
.set_speed = mt7621_spi_set_speed,
.xfer = mt7621_spi_xfer,
/*
* cs_info is not needed, since we require all chip selects to be
* in the device tree explicitly
*/
};
static const struct udevice_id mt7621_spi_ids[] = {
{ .compatible = "ralink,mt7621-spi" },
{ }
};
U_BOOT_DRIVER(mt7621_spi) = {
.name = "mt7621_spi",
.id = UCLASS_SPI,
.of_match = mt7621_spi_ids,
.ops = &mt7621_spi_ops,
.priv_auto_alloc_size = sizeof(struct mt7621_spi),
.probe = mt7621_spi_probe,
};