Heiko Stuebner d63c14cc3f net: phy: mscc: sync rx/tx delay settings with Linux on vsc85xx ...

The Linux kernel does set the clock delays to
- 0.2 ns (their default, and lowest, hardware value) if delays should
  not be enabled
- 2.0 ns (which causes the data to be sampled at exactly half way between
  clock transitions at 1000 Mbps) if delays should be enabled
depending on the interface mode

See https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/net/phy/mscc/mscc_main.c#n523

So instead of using arbitrary delay values like now, mimic this behaviour.

The behaviour is the same for all of vsc8530/8531/8540/8541 so move that
to a shared function while at it.

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>

2020-09-30 16:48:18 -04:00

54 KiB

Raw Blame History

View Raw