u-boot/configs/BSC9132QDS_SPIFLASH_DDRCLK100_SECURE_defconfig
Tom Rini cbabe7f87f configs: Migrate and re-enabled CONFIG_CMD_MTDPARTS
Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms
that had been enabling it turn it on by hand.  This exposed that we had
not yet migrated CMD_MTDPARTS fully, so do so now.

Fixes: 86dfa556d9 ("cmd: ubi: Remove useless call to mtdparts_init()")
Signed-off-by: Tom Rini <trini@konsulko.com>
2018-11-14 10:53:27 -05:00

54 lines
1.2 KiB
Plaintext

CONFIG_PPC=y
CONFIG_SYS_TEXT_BASE=0x11000000
CONFIG_SECURE_BOOT=y
CONFIG_MPC85xx=y
CONFIG_TARGET_BSC9132QDS=y
# CONFIG_SYS_MALLOC_F is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="SPIFLASH,SYS_CLK_100_DDR_100"
CONFIG_BOOTDELAY=10
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_SF=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_DATE=y
CONFIG_MP=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_FAT=y
CONFIG_MTDIDS_DEFAULT="nor0=88000000.nor,nand0=ff800000.flash,"
CONFIG_MTDPARTS_DEFAULT="mtdparts=88000000.nor:256k(dtb),7m(kernel),55m(fs),1m(uboot);ff800000.flash:1m(uboot),8m(kernel),512k(dtb),-(fs)"
CONFIG_DM=y
CONFIG_FSL_ESDHC=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SPI_FLASH=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_GIGE=y
CONFIG_E1000=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_FSL_ESPI=y
CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_SOFTWARE_EXP=y
CONFIG_OF_LIBFDT=y
CONFIG_FDT_FIXUP_PARTITIONS=y