Dan Murphy 834e91af43 usb: dra7xx: Add support for dra7xx xhci USB host ... Add the support for the dra7xx xhci usb host. dra7xx does not contain an EHCI controller so the headers can be removed from the board file. The xHCI host on dra7xx is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>		2013-10-20 23:42:41 +02:00
..
ehci-armada100.c
ehci-atmel.c
ehci-exynos.c	exynos: usb: Switch USB VBUS GPIOs to be device tree configured	2013-10-20 23:42:38 +02:00
ehci-faraday.c
ehci-fsl.c
ehci-hcd.c
ehci-ixp4xx.c
ehci-marvell.c
ehci-mpc512x.c
ehci-mx5.c
ehci-mx6.c
ehci-mxc.c
ehci-mxs.c
ehci-omap.c	usb: new board-specific USB init interface	2013-10-20 23:42:40 +02:00
ehci-pci.c
ehci-ppc4xx.c
ehci-spear.c
ehci-tegra.c	usb: new board-specific USB init interface	2013-10-20 23:42:40 +02:00
ehci-vct.c
ehci.h	usb: Move 'bmRequestType' USB device request macros from EHCI header	2013-10-20 23:42:38 +02:00
isp116x-hcd.c
isp116x.h
Makefile	OMAP5: USB: Add OMAP xHCI file and header	2013-10-20 23:42:39 +02:00
ohci-at91.c
ohci-da8xx.c
ohci-hcd.c	usb: new board-specific USB init interface	2013-10-20 23:42:40 +02:00
ohci-s3c24xx.c
ohci-s3c24xx.h
ohci.h	usb: new board-specific USB init interface	2013-10-20 23:42:40 +02:00
r8a66597-hcd.c
r8a66597.h
sl811-hcd.c
sl811.h
utmi-armada100.c
xhci-exynos5.c	exynos: usb: Switch USB VBUS GPIOs to be device tree configured	2013-10-20 23:42:38 +02:00
xhci-mem.c	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00
xhci-omap.c	usb: dra7xx: Add support for dra7xx xhci USB host	2013-10-20 23:42:41 +02:00
xhci-ring.c	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00
xhci.c	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00
xhci.h	USB: xHCI: Add stack support for xHCI	2013-10-20 23:42:38 +02:00