75eb82ec7c
Mflash is fusion memory device mainly targeted consumer eletronic and mobile phone. Internally, it have nand flash and other hardware logics and supports some different operation (ATA, IO, XIP) modes. IO mode is custom mode for the host that doesn't have IDE interface. (Many mobile targeted SoC doesn't have IDE bus) This driver support mflash IO mode. Followings are brief descriptions about IO mode. 1. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) 2. IO mode uses SRAM bus interface. Signed-off-by: unsik Kim <donari75@gmail.com>
403 lines
9.2 KiB
C
403 lines
9.2 KiB
C
/*
|
|
* (C) Copyright 2001
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <ide.h>
|
|
#include <part.h>
|
|
|
|
#undef PART_DEBUG
|
|
|
|
#ifdef PART_DEBUG
|
|
#define PRINTF(fmt,args...) printf (fmt ,##args)
|
|
#else
|
|
#define PRINTF(fmt,args...)
|
|
#endif
|
|
|
|
#if (defined(CONFIG_CMD_IDE) || \
|
|
defined(CONFIG_CMD_MG_DISK) || \
|
|
defined(CONFIG_CMD_SATA) || \
|
|
defined(CONFIG_CMD_SCSI) || \
|
|
defined(CONFIG_CMD_USB) || \
|
|
defined(CONFIG_MMC) || \
|
|
defined(CONFIG_SYSTEMACE) )
|
|
|
|
struct block_drvr {
|
|
char *name;
|
|
block_dev_desc_t* (*get_dev)(int dev);
|
|
};
|
|
|
|
static const struct block_drvr block_drvr[] = {
|
|
#if defined(CONFIG_CMD_IDE)
|
|
{ .name = "ide", .get_dev = ide_get_dev, },
|
|
#endif
|
|
#if defined(CONFIG_CMD_SATA)
|
|
{.name = "sata", .get_dev = sata_get_dev, },
|
|
#endif
|
|
#if defined(CONFIG_CMD_SCSI)
|
|
{ .name = "scsi", .get_dev = scsi_get_dev, },
|
|
#endif
|
|
#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
|
|
{ .name = "usb", .get_dev = usb_stor_get_dev, },
|
|
#endif
|
|
#if defined(CONFIG_MMC)
|
|
{ .name = "mmc", .get_dev = mmc_get_dev, },
|
|
#endif
|
|
#if defined(CONFIG_SYSTEMACE)
|
|
{ .name = "ace", .get_dev = systemace_get_dev, },
|
|
#endif
|
|
#if defined(CONFIG_CMD_MG_DISK)
|
|
{ .name = "mgd", .get_dev = mg_disk_get_dev, },
|
|
#endif
|
|
{ },
|
|
};
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
block_dev_desc_t *get_dev(char* ifname, int dev)
|
|
{
|
|
const struct block_drvr *drvr = block_drvr;
|
|
block_dev_desc_t* (*reloc_get_dev)(int dev);
|
|
|
|
while (drvr->name) {
|
|
reloc_get_dev = drvr->get_dev + gd->reloc_off;
|
|
if (strncmp(ifname, drvr->name, strlen(drvr->name)) == 0)
|
|
return reloc_get_dev(dev);
|
|
drvr++;
|
|
}
|
|
return NULL;
|
|
}
|
|
#else
|
|
block_dev_desc_t *get_dev(char* ifname, int dev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
#if (defined(CONFIG_CMD_IDE) || \
|
|
defined(CONFIG_CMD_MG_DISK) || \
|
|
defined(CONFIG_CMD_SATA) || \
|
|
defined(CONFIG_CMD_SCSI) || \
|
|
defined(CONFIG_CMD_USB) || \
|
|
defined(CONFIG_MMC) || \
|
|
defined(CONFIG_SYSTEMACE) )
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/*
|
|
* reports device info to the user
|
|
*/
|
|
void dev_print (block_dev_desc_t *dev_desc)
|
|
{
|
|
#ifdef CONFIG_LBA48
|
|
uint64_t lba512; /* number of blocks if 512bytes block size */
|
|
#else
|
|
lbaint_t lba512;
|
|
#endif
|
|
|
|
switch (dev_desc->if_type) {
|
|
case IF_TYPE_SCSI:
|
|
printf ("(%d:%d) Vendor: %s Prod.: %s Rev: %s\n",
|
|
dev_desc->target,dev_desc->lun,
|
|
dev_desc->vendor,
|
|
dev_desc->product,
|
|
dev_desc->revision);
|
|
break;
|
|
case IF_TYPE_ATAPI:
|
|
case IF_TYPE_IDE:
|
|
case IF_TYPE_SATA:
|
|
printf ("Model: %s Firm: %s Ser#: %s\n",
|
|
dev_desc->vendor,
|
|
dev_desc->revision,
|
|
dev_desc->product);
|
|
break;
|
|
case IF_TYPE_SD:
|
|
case IF_TYPE_MMC:
|
|
case IF_TYPE_USB:
|
|
printf ("Vendor: %s Rev: %s Prod: %s\n",
|
|
dev_desc->vendor,
|
|
dev_desc->revision,
|
|
dev_desc->product);
|
|
break;
|
|
case IF_TYPE_DOC:
|
|
puts("device type DOC\n");
|
|
return;
|
|
case IF_TYPE_UNKNOWN:
|
|
puts("device type unknown\n");
|
|
return;
|
|
default:
|
|
printf("Unhandled device type: %i\n", dev_desc->if_type);
|
|
return;
|
|
}
|
|
puts (" Type: ");
|
|
if (dev_desc->removable)
|
|
puts ("Removable ");
|
|
switch (dev_desc->type & 0x1F) {
|
|
case DEV_TYPE_HARDDISK:
|
|
puts ("Hard Disk");
|
|
break;
|
|
case DEV_TYPE_CDROM:
|
|
puts ("CD ROM");
|
|
break;
|
|
case DEV_TYPE_OPDISK:
|
|
puts ("Optical Device");
|
|
break;
|
|
case DEV_TYPE_TAPE:
|
|
puts ("Tape");
|
|
break;
|
|
default:
|
|
printf ("# %02X #", dev_desc->type & 0x1F);
|
|
break;
|
|
}
|
|
puts ("\n");
|
|
if ((dev_desc->lba * dev_desc->blksz)>0L) {
|
|
ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
|
|
lbaint_t lba;
|
|
|
|
lba = dev_desc->lba;
|
|
|
|
lba512 = (lba * (dev_desc->blksz/512));
|
|
mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */
|
|
/* round to 1 digit */
|
|
mb_quot = mb / 10;
|
|
mb_rem = mb - (10 * mb_quot);
|
|
|
|
gb = mb / 1024;
|
|
gb_quot = gb / 10;
|
|
gb_rem = gb - (10 * gb_quot);
|
|
#ifdef CONFIG_LBA48
|
|
if (dev_desc->lba48)
|
|
printf (" Supports 48-bit addressing\n");
|
|
#endif
|
|
#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF)
|
|
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n",
|
|
mb_quot, mb_rem,
|
|
gb_quot, gb_rem,
|
|
lba,
|
|
dev_desc->blksz);
|
|
#else
|
|
printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n",
|
|
mb_quot, mb_rem,
|
|
gb_quot, gb_rem,
|
|
(ulong)lba,
|
|
dev_desc->blksz);
|
|
#endif
|
|
} else {
|
|
puts (" Capacity: not available\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if (defined(CONFIG_CMD_IDE) || \
|
|
defined(CONFIG_CMD_MG_DISK) || \
|
|
defined(CONFIG_CMD_SATA) || \
|
|
defined(CONFIG_CMD_SCSI) || \
|
|
defined(CONFIG_CMD_USB) || \
|
|
defined(CONFIG_MMC) || \
|
|
defined(CONFIG_SYSTEMACE) )
|
|
|
|
#if defined(CONFIG_MAC_PARTITION) || \
|
|
defined(CONFIG_DOS_PARTITION) || \
|
|
defined(CONFIG_ISO_PARTITION) || \
|
|
defined(CONFIG_AMIGA_PARTITION) || \
|
|
defined(CONFIG_EFI_PARTITION)
|
|
|
|
void init_part (block_dev_desc_t * dev_desc)
|
|
{
|
|
#ifdef CONFIG_ISO_PARTITION
|
|
if (test_part_iso(dev_desc) == 0) {
|
|
dev_desc->part_type = PART_TYPE_ISO;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MAC_PARTITION
|
|
if (test_part_mac(dev_desc) == 0) {
|
|
dev_desc->part_type = PART_TYPE_MAC;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* must be placed before DOS partition detection */
|
|
#ifdef CONFIG_EFI_PARTITION
|
|
if (test_part_efi(dev_desc) == 0) {
|
|
dev_desc->part_type = PART_TYPE_EFI;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_DOS_PARTITION
|
|
if (test_part_dos(dev_desc) == 0) {
|
|
dev_desc->part_type = PART_TYPE_DOS;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_AMIGA_PARTITION
|
|
if (test_part_amiga(dev_desc) == 0) {
|
|
dev_desc->part_type = PART_TYPE_AMIGA;
|
|
return;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
int get_partition_info (block_dev_desc_t *dev_desc, int part
|
|
, disk_partition_t *info)
|
|
{
|
|
switch (dev_desc->part_type) {
|
|
#ifdef CONFIG_MAC_PARTITION
|
|
case PART_TYPE_MAC:
|
|
if (get_partition_info_mac(dev_desc,part,info) == 0) {
|
|
PRINTF ("## Valid MAC partition found ##\n");
|
|
return (0);
|
|
}
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_DOS_PARTITION
|
|
case PART_TYPE_DOS:
|
|
if (get_partition_info_dos(dev_desc,part,info) == 0) {
|
|
PRINTF ("## Valid DOS partition found ##\n");
|
|
return (0);
|
|
}
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_ISO_PARTITION
|
|
case PART_TYPE_ISO:
|
|
if (get_partition_info_iso(dev_desc,part,info) == 0) {
|
|
PRINTF ("## Valid ISO boot partition found ##\n");
|
|
return (0);
|
|
}
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_AMIGA_PARTITION
|
|
case PART_TYPE_AMIGA:
|
|
if (get_partition_info_amiga(dev_desc, part, info) == 0)
|
|
{
|
|
PRINTF ("## Valid Amiga partition found ##\n");
|
|
return (0);
|
|
}
|
|
break;
|
|
#endif
|
|
|
|
#ifdef CONFIG_EFI_PARTITION
|
|
case PART_TYPE_EFI:
|
|
if (get_partition_info_efi(dev_desc,part,info) == 0) {
|
|
PRINTF ("## Valid EFI partition found ##\n");
|
|
return (0);
|
|
}
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
return (-1);
|
|
}
|
|
|
|
static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
|
|
{
|
|
puts ("\nPartition Map for ");
|
|
switch (dev_desc->if_type) {
|
|
case IF_TYPE_IDE:
|
|
puts ("IDE");
|
|
break;
|
|
case IF_TYPE_SATA:
|
|
puts ("SATA");
|
|
break;
|
|
case IF_TYPE_SCSI:
|
|
puts ("SCSI");
|
|
break;
|
|
case IF_TYPE_ATAPI:
|
|
puts ("ATAPI");
|
|
break;
|
|
case IF_TYPE_USB:
|
|
puts ("USB");
|
|
break;
|
|
case IF_TYPE_DOC:
|
|
puts ("DOC");
|
|
break;
|
|
default:
|
|
puts ("UNKNOWN");
|
|
break;
|
|
}
|
|
printf (" device %d -- Partition Type: %s\n\n",
|
|
dev_desc->dev, type);
|
|
}
|
|
|
|
void print_part (block_dev_desc_t * dev_desc)
|
|
{
|
|
|
|
switch (dev_desc->part_type) {
|
|
#ifdef CONFIG_MAC_PARTITION
|
|
case PART_TYPE_MAC:
|
|
PRINTF ("## Testing for valid MAC partition ##\n");
|
|
print_part_header ("MAC", dev_desc);
|
|
print_part_mac (dev_desc);
|
|
return;
|
|
#endif
|
|
#ifdef CONFIG_DOS_PARTITION
|
|
case PART_TYPE_DOS:
|
|
PRINTF ("## Testing for valid DOS partition ##\n");
|
|
print_part_header ("DOS", dev_desc);
|
|
print_part_dos (dev_desc);
|
|
return;
|
|
#endif
|
|
|
|
#ifdef CONFIG_ISO_PARTITION
|
|
case PART_TYPE_ISO:
|
|
PRINTF ("## Testing for valid ISO Boot partition ##\n");
|
|
print_part_header ("ISO", dev_desc);
|
|
print_part_iso (dev_desc);
|
|
return;
|
|
#endif
|
|
|
|
#ifdef CONFIG_AMIGA_PARTITION
|
|
case PART_TYPE_AMIGA:
|
|
PRINTF ("## Testing for a valid Amiga partition ##\n");
|
|
print_part_header ("AMIGA", dev_desc);
|
|
print_part_amiga (dev_desc);
|
|
return;
|
|
#endif
|
|
|
|
#ifdef CONFIG_EFI_PARTITION
|
|
case PART_TYPE_EFI:
|
|
PRINTF ("## Testing for valid EFI partition ##\n");
|
|
print_part_header ("EFI", dev_desc);
|
|
print_part_efi (dev_desc);
|
|
return;
|
|
#endif
|
|
}
|
|
puts ("## Unknown partition table\n");
|
|
}
|
|
|
|
|
|
#else /* neither MAC nor DOS nor ISO nor AMIGA nor EFI partition configured */
|
|
# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION
|
|
# error nor CONFIG_ISO_PARTITION nor CONFIG_AMIGA_PARTITION
|
|
# error nor CONFIG_EFI_PARTITION configured!
|
|
#endif
|
|
|
|
#endif
|