cd61e86e6d
This patch provides four configurations which can support U-Boot SPL to boot from RAM or FLASH and then boot FIT image including OpenSBI FW_DYNAMIC firmware and U-Boot proper images from RAM or MMC boot devices. With ae350_rv[32|64]_spl_defconfigs: U-Boot SPL will be loaded by gdb or FSBL and runs in RAM in machine mode and then load FIT image from RAM device on AE350. With ae350_rv[32|64]_spl_xip_defconfigs: U-Boot SPL can be burned into SPI flash and run in flash in machine mode and then load FIT image from SPI flash or MMC device on AE350. Signed-off-by: Rick Chen <rick@andestech.com> Cc: KC Lin <kclin@andestech.com> Cc: Alan Kao <alankao@andestech.com>
39 lines
861 B
Plaintext
39 lines
861 B
Plaintext
CONFIG_RISCV=y
|
|
CONFIG_SPL=y
|
|
CONFIG_RISCV_SMODE=y
|
|
CONFIG_SYS_TEXT_BASE=0x01200000
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_TARGET_AX25_AE350=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_FIT=y
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_BOARD_EARLY_INIT_F=y
|
|
CONFIG_SYS_PROMPT="RISC-V # "
|
|
CONFIG_CMD_IMLS=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_SF=y
|
|
CONFIG_CMD_SF_TEST=y
|
|
# CONFIG_CMD_SETEXPR is not set
|
|
CONFIG_BOOTP_PREFER_SERVERIP=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_OF_PRIOR_STAGE=y
|
|
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
|
CONFIG_ENV_SECT_SIZE=0x1000
|
|
CONFIG_NET_RANDOM_ETHADDR=y
|
|
CONFIG_MMC=y
|
|
CONFIG_FTSDC010=y
|
|
CONFIG_FTSDC010_SDIO=y
|
|
CONFIG_MTD_NOR_FLASH=y
|
|
CONFIG_FLASH_CFI_DRIVER=y
|
|
CONFIG_CFI_FLASH=y
|
|
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
|
|
CONFIG_SYS_FLASH_CFI=y
|
|
CONFIG_SPI_FLASH=y
|
|
CONFIG_SF_DEFAULT_MODE=0x0
|
|
CONFIG_SPI_FLASH_MACRONIX=y
|
|
CONFIG_FTMAC100=y
|
|
CONFIG_BAUDRATE=38400
|
|
CONFIG_SYS_NS16550=y
|
|
CONFIG_SPI=y
|
|
CONFIG_ATCSPI200_SPI=y
|