6dd18bb111
Switch to DM_SPI support now. Signed-off-by: Tom Rini <trini@konsulko.com>
94 lines
2.5 KiB
Plaintext
94 lines
2.5 KiB
Plaintext
CONFIG_ARM=y
|
|
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
|
|
# CONFIG_SPL_USE_ARCH_MEMSET is not set
|
|
CONFIG_ARCH_OMAP2PLUS=y
|
|
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
|
CONFIG_TARGET_OMAP3_BEAGLE=y
|
|
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
|
|
CONFIG_SPL=y
|
|
CONFIG_DISTRO_DEFAULTS=y
|
|
CONFIG_NR_DRAM_BANKS=2
|
|
CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
|
|
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
|
|
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
|
|
CONFIG_VERSION_VARIABLE=y
|
|
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
|
|
CONFIG_SPL_SEPARATE_BSS=y
|
|
# CONFIG_SPL_FS_EXT4 is not set
|
|
CONFIG_SPL_MTD_SUPPORT=y
|
|
CONFIG_SYS_PROMPT="BeagleBoard # "
|
|
CONFIG_CMD_SPL=y
|
|
CONFIG_CMD_SPL_NAND_OFS=0x280000
|
|
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
|
|
CONFIG_CMD_ASKENV=y
|
|
# CONFIG_CMD_FLASH is not set
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_NAND=y
|
|
CONFIG_CMD_NAND_TRIMFFS=y
|
|
CONFIG_CMD_SPI=y
|
|
CONFIG_CMD_USB=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FS_UUID=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
|
|
CONFIG_CMD_UBI=y
|
|
# CONFIG_ISO_PARTITION is not set
|
|
# CONFIG_SPL_EFI_PARTITION is not set
|
|
CONFIG_SPL_PARTITION_UUIDS=y
|
|
CONFIG_OF_CONTROL=y
|
|
CONFIG_SPL_OF_CONTROL=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
|
|
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_SPL_DM=y
|
|
CONFIG_SPL_DM_SEQ_ALIAS=y
|
|
CONFIG_SPL_OF_TRANSLATE=y
|
|
CONFIG_USB_FUNCTION_FASTBOOT=y
|
|
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
|
|
CONFIG_LED_STATUS=y
|
|
CONFIG_LED_STATUS0=y
|
|
CONFIG_LED_STATUS_BIT=1
|
|
CONFIG_LED_STATUS_STATE=2
|
|
CONFIG_LED_STATUS1=y
|
|
CONFIG_LED_STATUS_BIT1=2
|
|
CONFIG_LED_STATUS_STATE1=2
|
|
CONFIG_LED_STATUS_BOOT_ENABLE=y
|
|
CONFIG_LED_STATUS_BOOT=1
|
|
CONFIG_LED_STATUS_GREEN_ENABLE=y
|
|
CONFIG_LED_STATUS_GREEN=2
|
|
CONFIG_LED_STATUS_CMD=y
|
|
CONFIG_TWL4030_LED=y
|
|
CONFIG_DM_MMC=y
|
|
CONFIG_MMC_OMAP_HS=y
|
|
CONFIG_NAND=y
|
|
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
|
|
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
|
|
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
|
|
CONFIG_SPL_NAND_SIMPLE=y
|
|
CONFIG_SPI=y
|
|
CONFIG_DM_SPI=y
|
|
CONFIG_OMAP3_SPI=y
|
|
CONFIG_USB=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OMAP3=y
|
|
CONFIG_USB_MUSB_GADGET=y
|
|
CONFIG_USB_MUSB_OMAP2PLUS=y
|
|
CONFIG_TWL4030_USB=y
|
|
CONFIG_USB_GADGET=y
|
|
CONFIG_USB_GADGET_MANUFACTURER="TI"
|
|
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
|
|
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
|
|
CONFIG_USB_ETHER=y
|
|
CONFIG_USB_HOST_ETHER=y
|
|
CONFIG_USB_ETHER_ASIX=y
|
|
CONFIG_USB_ETHER_MCS7830=y
|
|
CONFIG_USB_ETHER_SMSC95XX=y
|
|
CONFIG_VIDEO_OMAP3=y
|
|
CONFIG_FAT_WRITE=y
|
|
CONFIG_BCH=y
|