u-boot/drivers/serial
Patrice Chotard 60a996bacb serial: stm32x7: prepare the ground to STM32F4 support
STM32F4 serial IP is similar to F7 and H7, but registers
are not located at the same offset and some feature are
only supported by F7 and H7 version.

Registers offset must be added for each version and also
some flags indicated the supported feature.

Update registers name to match with datasheet (sr to isr,
rx_dr to rdr and tx_dr to tdr) and remove unused regs
(cr2, gtpr, rtor, and rqr).

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2017-10-08 16:19:56 -04:00
..
altera_jtag_uart.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
altera_uart.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
arm_dcc.c serial: dcc: Move driver to DM 2016-02-25 19:06:37 -05:00
atmel_usart.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
atmel_usart.h Add GPL-2.0+ SPDX-License-Identifier to source files 2013-07-24 09:44:38 -04:00
Kconfig serial: stm32x7: add STM32H7 support 2017-09-22 07:40:01 -04:00
lpc32xx_hsuart.c serial: lpc32xx hsuart: port driver to driver model 2016-01-13 21:05:22 -05:00
Makefile serial: nulldev: Add nulldev serial driver 2017-09-13 09:24:24 -04:00
mcfuart.c m68k: add DM model serial driver 2016-05-17 09:54:43 -06:00
ns16550.c Revert "serial: ns16550: Add RX interrupt buffer support" 2017-08-24 11:00:47 +08:00
sandbox.c dm: core: Replace of_offset with accessor 2017-02-08 06:12:14 -07:00
serial_ar933x.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_arc.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_bcm283x_mu.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_bcm6345.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_efi.c debug_uart: Adjust the declaration of debug_uart_init() 2015-10-21 07:46:50 -06:00
serial_intel_mid.c serial: Add serial driver for Intel MID 2017-04-10 10:02:03 +08:00
serial_linflexuart.c serial: Introduce linflex uart support 2016-06-13 08:56:02 -04:00
serial_lpuart.c dm: core: Replace of_offset with accessor (part 2) 2017-06-01 07:03:04 -06:00
serial_meson.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_mpc8xx.c powerpc, 8xx: move Serial driver to drivers/serial/ 2017-07-08 15:56:04 -04:00
serial_msm.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_mvebu_a3700.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_mxc.c serial: mxc: Add debug uart support 2017-07-12 09:44:22 +02:00
serial_ns16550.c serial: Remove serial_putc_raw_dev 2016-01-25 10:39:45 -05:00
serial_nulldev.c serial: nulldev: Add nulldev serial driver 2017-09-13 09:24:24 -04:00
serial_pic32.c dm: core: Replace of_offset with accessor 2017-02-08 06:12:14 -07:00
serial_pl01x_internal.h dm: serial: Tidy up the pl01x driver 2014-10-22 10:36:57 -06:00
serial_pl01x.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_pxa.c serial: pxa: integrate optional driver model handling 2016-11-23 13:53:20 +01:00
serial_rockchip.c rockchip: serial: Adapt rockchip of-platdata driver for rk3188 2017-03-16 16:03:44 -06:00
serial_s5p.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_sh.c serial: sh: Use the clock framework to obtain clock config 2017-08-03 04:26:25 +09:00
serial_sh.h serial: sh: Add r8a7796 support 2017-05-22 04:38:25 +09:00
serial_sti_asc.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_stm32.c serial: serial_stm32: move clock config from driver to board 2016-02-08 10:10:36 -05:00
serial_stm32x7.c serial: stm32x7: prepare the ground to STM32F4 support 2017-10-08 16:19:56 -04:00
serial_stm32x7.h serial: stm32x7: prepare the ground to STM32F4 support 2017-10-08 16:19:56 -04:00
serial_uniphier.c dm: Fix up inclusion of common.h 2017-06-01 07:03:03 -06:00
serial_xuartlite.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial_zynq.c dm: Rename dev_addr..() functions 2017-06-01 07:03:01 -06:00
serial-uclass.c serial: serial-uclass: Add generic serial RX buffer support 2017-08-24 11:00:47 +08:00
serial.c powerpc: Remove 8260 remainders 2017-07-23 09:24:47 -04:00
usbtty.c env: Rename getenv/_f() to env_get() 2017-08-16 08:30:24 -04:00
usbtty.h omap: clean-up dead configs 2014-08-09 11:17:04 -04:00