leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5ce50206ed
u-boot/doc/device-tree-bindings
History
Fabio Estevam ccbda9e680 phy: atheros: Fix the "qca,clk-out-frequency" example 
The correct name for the property is "qca,clk-out-frequency", so fix
it accordingly.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Michael Walle <michael@walle.cc>
2020-06-23 14:43:23 -04:00
..
adc dt-bindings: Document STM32 ADC DT bindings 2018-08-03 19:53:10 -04:00
arm doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
ata x86: ivybridge: Add SATA init 2014-11-25 06:34:01 -07:00
axi doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
board doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
clock ARM: dts: stm32m1: add reg for pll nodes 2020-02-13 17:26:23 +01:00
cpu doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
exynos s5p: cpu_info: print "cpu-model" if exists in dts 2015-11-02 10:37:59 +09:00
firmware dt/bindings: add bindings for optee 2018-10-07 10:47:38 -04:00
fpga ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10 2019-05-10 22:48:10 +02:00
fsp/fsp2/apollolake x86: apl: Use devicetree for FSP-S configuration 2020-05-27 14:40:09 +08:00
gpio dt-bindings: gpio: alignment with kernel v5.3 2020-04-16 23:06:54 -04:00
gpu tegra124: dts: Add host1x node to provide display information 2015-05-13 09:24:08 -07:00
i2c dm: i2c-gpio: add support for clock stretching 2020-03-16 07:55:06 +01:00
input dts: Add a binding for hid-over-i2c 2020-04-16 14:36:28 +08:00
interrupt-controller tpm: cr50: Use the correct GPIO binding 2020-04-16 14:36:28 +08:00
leds led: add initial support for bcm6858 2019-04-22 18:13:24 -04:00
mailbox mailbox: Introduce K3 Secure Proxy Driver 2018-09-11 08:32:55 -04:00
memory fdt: Add device tree memory bindings 2018-07-09 09:11:00 -06:00
memory-controller dt-bindings: memory-controller: Introduce J721E DDRSS bindings 2019-10-25 17:33:21 -04:00
memory-controllers ram: stm32mp1: the property st, phy-cal becomes optional 2020-03-24 14:23:30 +01:00
misc Merge tag 'ti-v2020.07-next' of https://gitlab.denx.de/u-boot/custodians/u-boot-ti into next 2020-03-17 11:59:58 -04:00
mmc ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards 2019-04-18 09:12:38 +03:00
mtd ARM: dts: stm32mp1: DT alignment with kernel v5.4 2020-02-13 17:25:34 +01:00
nand tegra: fdt: Add NAND controller binding and definitions 2012-09-07 13:54:30 -07:00
net phy: atheros: Fix the "qca,clk-out-frequency" example 2020-06-23 14:43:23 -04:00
pci dm: pci: Allow disabling auto-config for a device 2020-04-16 14:36:28 +08:00
pci_endpoint pci_ep: add Cadence PCIe endpoint driver 2019-07-11 10:05:15 -04:00
phy dt-bindings: phy-mtk-tphy: add properties of address mapping and clocks 2020-05-02 12:32:28 +02:00
pinctrl x86: p2sb: Drop 'apl' prefix 2020-03-05 18:25:21 +08:00
pmic power: pmic: add Ricoh RN5T567 PMIC support 2016-10-07 12:26:15 +02:00
power dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access 2019-07-26 21:49:23 -04:00
pwm doc: dtbinding: add pwm binding file 2017-05-10 13:37:21 -06:00
ram doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
regulator dm: regulator: support regulator more state 2019-11-10 20:31:09 +08:00
remoteproc dt-bindings: remoteproc: Add bindings for DSP C66x clusters on TI K3 SoCs 2019-10-11 10:07:34 -04:00
reserved-memory doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
reset reset: Introduce TI System Control Interface (TI SCI) reset driver 2018-09-11 08:32:55 -04:00
rtc rtc: add support for DS3232 device 2020-01-10 10:25:13 -05:00
serial m68k: add basic set of devicetrees 2019-05-23 23:14:38 -04:00
sound sound: Add codec enable to the sound bindings 2019-08-09 10:01:34 -07:00
spi doc: device-tree-bindings: alignment with v5.2-rc6 for spi-stm32-qspi.txt 2019-07-22 11:04:52 +02:00
spmi drivers: spmi: Add support for Qualcomm SPMI bus driver 2016-04-01 17:18:12 -04:00
sysreset sysreset: Add TI System Control Interface (TI SCI) sysreset driver 2018-09-11 08:32:55 -04:00
thermal thermal: ti-bandgap: Add support for temperature sensor 2017-11-21 08:03:38 -05:00
timer doc: Remove duplicated documentation directory 2019-06-20 10:57:08 -04:00
tpm2 doc: device-tree-bindings: add Sandbox TPMv2.0 module info 2018-05-25 20:13:00 -04:00
usb dt-bindings: usb: mtk-xhci: Add binding for MediaTek xHCI host controller 2020-05-02 12:32:28 +02:00
video doc: device-tree-bindings: update reference to binding directory 2020-04-16 23:06:54 -04:00
w1 w1: Add driver for i.MX bus master controller 2019-01-01 14:12:18 +01:00
w1-eeprom w1-eeprom: Add support for Maxim DS2502 add only memory 2018-11-16 16:51:55 -05:00
chosen.txt bootcount: add uclass for bootcount 2018-12-10 10:04:44 +01:00
config.txt rockchip: rk3399-puma: add code to allow forcing a power-on reset 2017-11-30 22:59:54 +01:00
device.txt acpi: Add a binding for ACPI settings in the device tree 2020-04-30 17:16:12 +08:00
README fdt: Add staging area for device tree binding documentation 2012-03-29 08:12:47 +02:00
root.txt fdt: Pass the device serial number through devicetree 2015-06-05 08:32:07 -06:00

README 

Device Tree Bindings Staging Area
=================================

This directory contains device tree bindings for U-Boot.

These follow along with Linux kernel bindings, with a few additions. By
adding the files here, U-Boot patches can clearly show thees additions.
This makes it easier for device tree people to review these additions in
patches sent to the U-Boot mailing list.

The intent IS to commit these files to U-Boot. Hopefully at some point
the files will be stored in another repo (shared with Linux) which is
brought in as needed. Changes here are intended to mirror changes in the
Linux Documentation/devicetree/bindings/ directory.

sjg@chromium.org
17-Jan-12