u-boot/drivers/dfu/dfu_nand.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

247 lines
5.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* dfu_nand.c -- DFU for NAND routines.
*
* Copyright (C) 2012-2013 Texas Instruments, Inc.
*
* Based on dfu_mmc.c which is:
* Copyright (C) 2012 Samsung Electronics
* author: Lukasz Majewski <l.majewski@samsung.com>
*/
#include <common.h>
#include <malloc.h>
#include <errno.h>
#include <div64.h>
#include <dfu.h>
#include <linux/mtd/mtd.h>
#include <jffs2/load_kernel.h>
#include <nand.h>
static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
loff_t start, lim;
size_t count, actual;
int ret;
struct mtd_info *mtd;
/* if buf == NULL return total size of the area */
if (buf == NULL) {
*len = dfu->data.nand.size;
return 0;
}
start = dfu->data.nand.start + offset + dfu->bad_skip;
lim = dfu->data.nand.start + dfu->data.nand.size - start;
count = *len;
mtd = get_nand_dev_by_index(nand_curr_device);
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!mtd) {
printf("%s: invalid nand device\n", __func__);
return -1;
}
if (op == DFU_OP_READ) {
ret = nand_read_skip_bad(mtd, start, &count, &actual,
lim, buf);
} else {
nand_erase_options_t opts;
memset(&opts, 0, sizeof(opts));
opts.offset = start;
opts.length = count;
opts.spread = 1;
opts.quiet = 1;
opts.lim = lim;
/* first erase */
ret = nand_erase_opts(mtd, &opts);
if (ret)
return ret;
/* then write */
ret = nand_write_skip_bad(mtd, start, &count, &actual,
lim, buf, WITH_WR_VERIFY);
}
if (ret != 0) {
printf("%s: nand_%s_skip_bad call failed at %llx!\n",
__func__, op == DFU_OP_READ ? "read" : "write",
start);
return ret;
}
/*
* Find out where we stopped writing data. This can be deeper into
* the NAND than we expected due to having to skip bad blocks. So
* we must take this into account for the next write, if any.
*/
if (actual > count)
dfu->bad_skip += actual - count;
return ret;
}
static inline int nand_block_write(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
return nand_block_op(DFU_OP_WRITE, dfu, offset, buf, len);
}
static inline int nand_block_read(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
return nand_block_op(DFU_OP_READ, dfu, offset, buf, len);
}
static int dfu_write_medium_nand(struct dfu_entity *dfu,
u64 offset, void *buf, long *len)
{
int ret = -1;
switch (dfu->layout) {
case DFU_RAW_ADDR:
ret = nand_block_write(dfu, offset, buf, len);
break;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
}
return ret;
}
int dfu_get_medium_size_nand(struct dfu_entity *dfu, u64 *size)
{
*size = dfu->data.nand.size;
return 0;
}
static int dfu_read_medium_nand(struct dfu_entity *dfu, u64 offset, void *buf,
long *len)
{
int ret = -1;
switch (dfu->layout) {
case DFU_RAW_ADDR:
ret = nand_block_read(dfu, offset, buf, len);
break;
default:
printf("%s: Layout (%s) not (yet) supported!\n", __func__,
dfu_get_layout(dfu->layout));
}
return ret;
}
static int dfu_flush_medium_nand(struct dfu_entity *dfu)
{
int ret = 0;
u64 off;
/* in case of ubi partition, erase rest of the partition */
if (dfu->data.nand.ubi) {
struct mtd_info *mtd = get_nand_dev_by_index(nand_curr_device);
nand_erase_options_t opts;
if (nand_curr_device < 0 ||
nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
!mtd) {
printf("%s: invalid nand device\n", __func__);
return -1;
}
memset(&opts, 0, sizeof(opts));
off = dfu->offset;
if ((off & (mtd->erasesize - 1)) != 0) {
/*
* last write ended with unaligned length
* sector is erased, jump to next
*/
off = off & ~((mtd->erasesize - 1));
off += mtd->erasesize;
}
opts.offset = dfu->data.nand.start + off +
dfu->bad_skip;
opts.length = dfu->data.nand.start +
dfu->data.nand.size - opts.offset;
ret = nand_erase_opts(mtd, &opts);
if (ret != 0)
printf("Failure erase: %d\n", ret);
}
return ret;
}
unsigned int dfu_polltimeout_nand(struct dfu_entity *dfu)
{
/*
* Currently, Poll Timeout != 0 is only needed on nand
* ubi partition, as the not used sectors need an erase
*/
if (dfu->data.nand.ubi)
return DFU_MANIFEST_POLL_TIMEOUT;
return DFU_DEFAULT_POLL_TIMEOUT;
}
int dfu_fill_entity_nand(struct dfu_entity *dfu, char *devstr, char *s)
{
char *st;
int ret, dev, part;
dfu->data.nand.ubi = 0;
dfu->dev_type = DFU_DEV_NAND;
st = strsep(&s, " ");
if (!strcmp(st, "raw")) {
dfu->layout = DFU_RAW_ADDR;
dfu->data.nand.start = simple_strtoul(s, &s, 16);
s++;
dfu->data.nand.size = simple_strtoul(s, &s, 16);
} else if ((!strcmp(st, "part")) || (!strcmp(st, "partubi"))) {
char mtd_id[32];
struct mtd_device *mtd_dev;
u8 part_num;
struct part_info *pi;
dfu->layout = DFU_RAW_ADDR;
dev = simple_strtoul(s, &s, 10);
s++;
part = simple_strtoul(s, &s, 10);
sprintf(mtd_id, "%s%d,%d", "nand", dev, part - 1);
printf("using id '%s'\n", mtd_id);
mtdparts_init();
ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
if (ret != 0) {
printf("Could not locate '%s'\n", mtd_id);
return -1;
}
dfu->data.nand.start = pi->offset;
dfu->data.nand.size = pi->size;
if (!strcmp(st, "partubi"))
dfu->data.nand.ubi = 1;
} else {
printf("%s: Memory layout (%s) not supported!\n", __func__, st);
return -1;
}
dfu->get_medium_size = dfu_get_medium_size_nand;
dfu->read_medium = dfu_read_medium_nand;
dfu->write_medium = dfu_write_medium_nand;
dfu->flush_medium = dfu_flush_medium_nand;
dfu->poll_timeout = dfu_polltimeout_nand;
/* initial state */
dfu->inited = 0;
return 0;
}