u-boot/include/twl6030.h
Igor Opaniuk 2147a16983 dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIO
Use CONFIG_IS_ENABLED() macro, which provides more convenient
way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs
for both SPL and U-Boot proper.

CONFIG_IS_ENABLED(DM_I2C) expands to:
- 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y',
- 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y',
- 0 otherwise.

All occurences were replaced automatically using these bash cmds:
$ find . -type f -exec sed -i
     's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} +
$ find . -type f -exec sed -i
    's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +
$ find . -type f -exec sed -i
    's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} +

Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-21 06:08:00 +01:00

226 lines
5.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*/
#ifndef TWL6030_H
#define TWL6030_H
#include <common.h>
#include <i2c.h>
/* I2C chip addresses */
#define TWL6030_CHIP_PM 0x48
#define TWL6030_CHIP_USB 0x49
#define TWL6030_CHIP_ADC 0x49
#define TWL6030_CHIP_CHARGER 0x49
#define TWL6030_CHIP_PWM 0x49
/* Slave Address 0x48 */
#define TWL6030_STS_HW_CONDITIONS 0x21
#define TWL6030_STS_HW_CONDITIONS_PWRON (1 << 0)
#define TWL6030_PHOENIX_DEV_ON 0x25
#define TWL6030_PHOENIX_APP_DEVOFF (1 << 0)
#define TWL6030_PHOENIX_CON_DEVOFF (1 << 1)
#define TWL6030_PHOENIX_MOD_DEVOFF (1 << 2)
#define TWL6030_PH_STS_BOOT 0x29
#define TWL6030_PH_STS_BOOT0 (1 << 0)
#define TWL6030_PH_STS_BOOT1 (1 << 1)
#define TWL6030_PH_STS_BOOT2 (1 << 2)
#define TWL6030_PH_STS_BOOT3 (1 << 3)
#define TWL6030_VAUX1_CFG_STATE 0x86
#define TWL6030_VAUX1_CFG_VOLTAGE 0x87
#define TWL6030_VMMC_CFG_STATE 0x9A
#define TWL6030_VMMC_CFG_VOLTAGE 0x9B
#define TWL6030_VUSB_CFG_STATE 0xA2
#define TWL6030_VUSB_CFG_VOLTAGE 0xA3
#define TWL6030_CFG_GRP_P1 (1 << 0)
#define TWL6030_CFG_STATE_ON (1 << 0)
#define TWL6030_CFG_STATE_P1 (TWL6030_CFG_GRP_P1 << 5)
#define TWL6030_CFG_VOLTAGE_18 0x09
#define TWL6030_CFG_VOLTAGE_28 0x13
#define TWL6030_CFG_VOLTAGE_30 0x15
#define TWL6030_CFG_VOLTAGE_33 0x18
#define MISC1 0xE4
#define VAC_MEAS (1 << 2)
#define VBAT_MEAS (1 << 1)
#define BB_MEAS (1 << 0)
#define TWL6030_MISC2 0xE5
#define TWL6030_MISC2_VUSB_IN_PMID (1 << 3)
#define TWL6030_MISC2_VUSB_IN_VSYS (1 << 4)
/* Slave Address 0x49 */
#define TWL6030_CONTROLLER_STAT1 0xE3
#define TWL6030_CONTROLLER_STAT1_VAC_DET (1 << 3)
#define TWL6030_CONTROLLER_STAT1_VBUS_DET (1 << 2)
/* Battery CHARGER REGISTERS */
#define CONTROLLER_INT_MASK 0xE0
#define CONTROLLER_CTRL1 0xE1
#define CONTROLLER_WDG 0xE2
#define CONTROLLER_STAT1 0xE3
#define CHARGERUSB_INT_STATUS 0xE4
#define CHARGERUSB_INT_MASK 0xE5
#define CHARGERUSB_STATUS_INT1 0xE6
#define CHARGERUSB_STATUS_INT2 0xE7
#define CHARGERUSB_CTRL1 0xE8
#define CHARGERUSB_CTRL2 0xE9
#define CHARGERUSB_CTRL3 0xEA
#define CHARGERUSB_STAT1 0xEB
#define CHARGERUSB_VOREG 0xEC
#define CHARGERUSB_VICHRG 0xED
#define CHARGERUSB_CINLIMIT 0xEE
#define CHARGERUSB_CTRLLIMIT1 0xEF
/* CHARGERUSB_VICHRG */
#define CHARGERUSB_VICHRG_500 0x4
#define CHARGERUSB_VICHRG_1500 0xE
/* CHARGERUSB_CINLIMIT */
#define CHARGERUSB_CIN_LIMIT_100 0x1
#define CHARGERUSB_CIN_LIMIT_300 0x5
#define CHARGERUSB_CIN_LIMIT_500 0x9
#define CHARGERUSB_CIN_LIMIT_NONE 0xF
/* CONTROLLER_INT_MASK */
#define MVAC_FAULT (1 << 6)
#define MAC_EOC (1 << 5)
#define MBAT_REMOVED (1 << 4)
#define MFAULT_WDG (1 << 3)
#define MBAT_TEMP (1 << 2)
#define MVBUS_DET (1 << 1)
#define MVAC_DET (1 << 0)
/* CHARGERUSB_INT_MASK */
#define MASK_MCURRENT_TERM (1 << 3)
#define MASK_MCHARGERUSB_STAT (1 << 2)
#define MASK_MCHARGERUSB_THMREG (1 << 1)
#define MASK_MCHARGERUSB_FAULT (1 << 0)
/* CHARGERUSB_VOREG */
#define CHARGERUSB_VOREG_3P52 0x01
#define CHARGERUSB_VOREG_4P0 0x19
#define CHARGERUSB_VOREG_4P2 0x23
#define CHARGERUSB_VOREG_4P76 0x3F
/* CHARGERUSB_CTRL1 */
#define SUSPEND_BOOT (1 << 7)
#define OPA_MODE (1 << 6)
#define HZ_MODE (1 << 5)
#define TERM (1 << 4)
/* CHARGERUSB_CTRL2 */
#define CHARGERUSB_CTRL2_VITERM_50 (0 << 5)
#define CHARGERUSB_CTRL2_VITERM_100 (1 << 5)
#define CHARGERUSB_CTRL2_VITERM_150 (2 << 5)
#define CHARGERUSB_CTRL2_VITERM_400 (7 << 5)
/* CONTROLLER_CTRL1 */
#define CONTROLLER_CTRL1_EN_CHARGER (1 << 4)
#define CONTROLLER_CTRL1_SEL_CHARGER (1 << 3)
/* CONTROLLER_STAT1 */
#define CHRG_EXTCHRG_STATZ (1 << 7)
#define CHRG_DET_N (1 << 5)
#define VAC_DET (1 << 3)
#define VBUS_DET (1 << 2)
#define FG_REG_10 0xCA
#define FG_REG_11 0xCB
#define TOGGLE1 0x90
#define FGS (1 << 5)
#define FGR (1 << 4)
#define GPADCS (1 << 1)
#define GPADCR (1 << 0)
#define CTRL_P2 0x34
#define CTRL_P2_SP2 (1 << 2)
#define CTRL_P2_EOCP2 (1 << 1)
#define CTRL_P2_BUSY (1 << 0)
#define TWL6032_CTRL_P1 0x36
#define CTRL_P1_SP1 (1 << 3)
#define GPCH0_LSB 0x57
#define GPCH0_MSB 0x58
#define TWL6032_GPCH0_LSB 0x3b
#define TWL6032_GPSELECT_ISB 0x35
#define USB_PRODUCT_ID_LSB 0x02
#define TWL6030_GPADC_VBAT_CHNL 0x07
#define TWL6032_GPADC_VBAT_CHNL 0x12
#define TWL6030_GPADC_CTRL 0x2e
#define TWL6032_GPADC_CTRL2 0x2f
#define GPADC_CTRL2_CH18_SCALER_EN (1 << 2)
#define GPADC_CTRL_SCALER_DIV4 (1 << 3)
#define TWL6030_VBAT_MULT 40 * 1000
#define TWL6032_VBAT_MULT 25 * 1000
#define TWL6030_VBAT_SHIFT (10 + 3)
#define TWL6032_VBAT_SHIFT (12 + 2)
enum twl603x_chip_type{
chip_TWL6030,
chip_TWL6032,
chip_TWL603X_cnt
};
struct twl6030_data{
u8 chip_type;
u8 adc_rbase;
u8 adc_ctrl;
u8 adc_enable;
int vbat_mult;
int vbat_shift;
};
/* Functions to read and write from TWL6030 */
#if !CONFIG_IS_ENABLED(DM_I2C)
static inline int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val)
{
return i2c_write(chip_no, reg, 1, &val, 1);
}
static inline int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val)
{
return i2c_read(chip_no, reg, 1, val, 1);
}
#else
int twl6030_i2c_write_u8(u8 chip_no, u8 reg, u8 val);
int twl6030_i2c_read_u8(u8 chip_no, u8 reg, u8 *val);
#endif
/*
* Power
*/
void twl6030_power_off(void);
void twl6030_init_battery_charging(void);
void twl6030_usb_device_settings(void);
void twl6030_start_usb_charging(void);
void twl6030_stop_usb_charging(void);
int twl6030_get_battery_voltage(void);
int twl6030_get_battery_current(void);
void twl6030_power_mmc_init(int dev_index);
/*
* Input
*/
int twl6030_input_power_button(void);
int twl6030_input_charger(void);
int twl6030_input_usb(void);
#endif /* TWL6030_H */