83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
305 lines
7.5 KiB
C
305 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2012 Renesas Solutions Corp.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <environment.h>
|
|
#include <malloc.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mmc.h>
|
|
#include <spi.h>
|
|
#include <spi_flash.h>
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("BOARD: SH7752 evaluation board (R0P7752C00000RZ)\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void init_gpio(void)
|
|
{
|
|
struct gpio_regs *gpio = GPIO_BASE;
|
|
struct sermux_regs *sermux = SERMUX_BASE;
|
|
|
|
/* GPIO */
|
|
writew(0x0000, &gpio->pacr); /* GETHER */
|
|
writew(0x0001, &gpio->pbcr); /* INTC */
|
|
writew(0x0000, &gpio->pccr); /* PWMU, INTC */
|
|
writew(0xeaff, &gpio->pecr); /* GPIO */
|
|
writew(0x0000, &gpio->pfcr); /* WDT */
|
|
writew(0x0000, &gpio->phcr); /* SPI1 */
|
|
writew(0x0000, &gpio->picr); /* SDHI */
|
|
writew(0x0003, &gpio->pkcr); /* SerMux */
|
|
writew(0x0000, &gpio->plcr); /* SerMux */
|
|
writew(0x0000, &gpio->pmcr); /* RIIC */
|
|
writew(0x0000, &gpio->pncr); /* USB, SGPIO */
|
|
writew(0x0000, &gpio->pocr); /* SGPIO */
|
|
writew(0xd555, &gpio->pqcr); /* GPIO */
|
|
writew(0x0000, &gpio->prcr); /* RIIC */
|
|
writew(0x0000, &gpio->pscr); /* RIIC */
|
|
writeb(0x00, &gpio->pudr);
|
|
writew(0x5555, &gpio->pucr); /* Debug LED */
|
|
writew(0x0000, &gpio->pvcr); /* RSPI */
|
|
writew(0x0000, &gpio->pwcr); /* EVC */
|
|
writew(0x0000, &gpio->pxcr); /* LBSC */
|
|
writew(0x0000, &gpio->pycr); /* LBSC */
|
|
writew(0x0000, &gpio->pzcr); /* eMMC */
|
|
writew(0xfe00, &gpio->psel0);
|
|
writew(0xff00, &gpio->psel3);
|
|
writew(0x771f, &gpio->psel4);
|
|
writew(0x00ff, &gpio->psel6);
|
|
writew(0xfc00, &gpio->psel7);
|
|
|
|
writeb(0x10, &sermux->smr0); /* SMR0: SerMux mode 0 */
|
|
}
|
|
|
|
static void init_usb_phy(void)
|
|
{
|
|
struct usb_common_regs *common0 = USB0_COMMON_BASE;
|
|
struct usb_common_regs *common1 = USB1_COMMON_BASE;
|
|
struct usb0_phy_regs *phy = USB0_PHY_BASE;
|
|
struct usb1_port_regs *port = USB1_PORT_BASE;
|
|
struct usb1_alignment_regs *align = USB1_ALIGNMENT_BASE;
|
|
|
|
writew(0x0100, &phy->reset); /* set reset */
|
|
/* port0 = USB0, port1 = USB1 */
|
|
writew(0x0002, &phy->portsel);
|
|
writel(0x0001, &port->port1sel); /* port1 = Host */
|
|
writew(0x0111, &phy->reset); /* clear reset */
|
|
|
|
writew(0x4000, &common0->suspmode);
|
|
writew(0x4000, &common1->suspmode);
|
|
|
|
#if defined(__LITTLE_ENDIAN)
|
|
writel(0x00000000, &align->ehcidatac);
|
|
writel(0x00000000, &align->ohcidatac);
|
|
#endif
|
|
}
|
|
|
|
static void init_gether_mdio(void)
|
|
{
|
|
struct gpio_regs *gpio = GPIO_BASE;
|
|
|
|
writew(readw(&gpio->pgcr) | 0x0004, &gpio->pgcr);
|
|
writeb(readb(&gpio->pgdr) | 0x02, &gpio->pgdr); /* Use ET0-MDIO */
|
|
}
|
|
|
|
static void set_mac_to_sh_giga_eth_register(int channel, char *mac_string)
|
|
{
|
|
struct ether_mac_regs *ether;
|
|
unsigned char mac[6];
|
|
unsigned long val;
|
|
|
|
eth_parse_enetaddr(mac_string, mac);
|
|
|
|
if (!channel)
|
|
ether = GETHER0_MAC_BASE;
|
|
else
|
|
ether = GETHER1_MAC_BASE;
|
|
|
|
val = (mac[0] << 24) | (mac[1] << 16) | (mac[2] << 8) | mac[3];
|
|
writel(val, ðer->mahr);
|
|
val = (mac[4] << 8) | mac[5];
|
|
writel(val, ðer->malr);
|
|
}
|
|
|
|
/*****************************************************************
|
|
* This PMB must be set on this timing. The lowlevel_init is run on
|
|
* Area 0(phys 0x00000000), so we have to map it.
|
|
*
|
|
* The new PMB table is following:
|
|
* ent virt phys v sz c wt
|
|
* 0 0xa0000000 0x40000000 1 128M 0 1
|
|
* 1 0xa8000000 0x48000000 1 128M 0 1
|
|
* 2 0xb0000000 0x50000000 1 128M 0 1
|
|
* 3 0xb8000000 0x58000000 1 128M 0 1
|
|
* 4 0x80000000 0x40000000 1 128M 1 1
|
|
* 5 0x88000000 0x48000000 1 128M 1 1
|
|
* 6 0x90000000 0x50000000 1 128M 1 1
|
|
* 7 0x98000000 0x58000000 1 128M 1 1
|
|
*/
|
|
static void set_pmb_on_board_init(void)
|
|
{
|
|
struct mmu_regs *mmu = MMU_BASE;
|
|
|
|
/* clear ITLB */
|
|
writel(0x00000004, &mmu->mmucr);
|
|
|
|
/* delete PMB for SPIBOOT */
|
|
writel(0, PMB_ADDR_BASE(0));
|
|
writel(0, PMB_DATA_BASE(0));
|
|
|
|
/* add PMB for SDRAM(0x40000000 - 0x47ffffff) */
|
|
/* ppn ub v s1 s0 c wt */
|
|
writel(mk_pmb_addr_val(0xa0), PMB_ADDR_BASE(0));
|
|
writel(mk_pmb_data_val(0x40, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(0));
|
|
writel(mk_pmb_addr_val(0xb0), PMB_ADDR_BASE(2));
|
|
writel(mk_pmb_data_val(0x50, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(2));
|
|
writel(mk_pmb_addr_val(0xb8), PMB_ADDR_BASE(3));
|
|
writel(mk_pmb_data_val(0x58, 1, 1, 1, 0, 0, 1), PMB_DATA_BASE(3));
|
|
writel(mk_pmb_addr_val(0x80), PMB_ADDR_BASE(4));
|
|
writel(mk_pmb_data_val(0x40, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(4));
|
|
writel(mk_pmb_addr_val(0x90), PMB_ADDR_BASE(6));
|
|
writel(mk_pmb_data_val(0x50, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(6));
|
|
writel(mk_pmb_addr_val(0x98), PMB_ADDR_BASE(7));
|
|
writel(mk_pmb_data_val(0x58, 0, 1, 1, 0, 1, 1), PMB_DATA_BASE(7));
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
init_gpio();
|
|
set_pmb_on_board_init();
|
|
|
|
init_usb_phy();
|
|
init_gether_mdio();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
struct gpio_regs *gpio = GPIO_BASE;
|
|
|
|
writew(readw(&gpio->pgcr) | 0x0040, &gpio->pgcr);
|
|
writeb(readb(&gpio->pgdr) & ~0x08, &gpio->pgdr); /* Reset */
|
|
udelay(1);
|
|
writeb(readb(&gpio->pgdr) | 0x08, &gpio->pgdr); /* Release reset */
|
|
udelay(200);
|
|
|
|
return mmcif_mmc_init();
|
|
}
|
|
|
|
static int get_sh_eth_mac_raw(unsigned char *buf, int size)
|
|
{
|
|
struct spi_flash *spi;
|
|
int ret;
|
|
|
|
spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
|
|
if (spi == NULL) {
|
|
printf("%s: spi_flash probe failed.\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
ret = spi_flash_read(spi, SH7752EVB_ETHERNET_MAC_BASE, size, buf);
|
|
if (ret) {
|
|
printf("%s: spi_flash read failed.\n", __func__);
|
|
spi_flash_free(spi);
|
|
return 1;
|
|
}
|
|
spi_flash_free(spi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_sh_eth_mac(int channel, char *mac_string, unsigned char *buf)
|
|
{
|
|
memcpy(mac_string, &buf[channel * (SH7752EVB_ETHERNET_MAC_SIZE + 1)],
|
|
SH7752EVB_ETHERNET_MAC_SIZE);
|
|
mac_string[SH7752EVB_ETHERNET_MAC_SIZE] = 0x00; /* terminate */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void init_ethernet_mac(void)
|
|
{
|
|
char mac_string[64];
|
|
char env_string[64];
|
|
int i;
|
|
unsigned char *buf;
|
|
|
|
buf = malloc(256);
|
|
if (!buf) {
|
|
printf("%s: malloc failed.\n", __func__);
|
|
return;
|
|
}
|
|
get_sh_eth_mac_raw(buf, 256);
|
|
|
|
/* Gigabit Ethernet */
|
|
for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
|
|
get_sh_eth_mac(i, mac_string, buf);
|
|
if (i == 0)
|
|
env_set("ethaddr", mac_string);
|
|
else {
|
|
sprintf(env_string, "eth%daddr", i);
|
|
env_set(env_string, mac_string);
|
|
}
|
|
set_mac_to_sh_giga_eth_register(i, mac_string);
|
|
}
|
|
|
|
free(buf);
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
init_ethernet_mac();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int do_write_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
int i, ret;
|
|
char mac_string[256];
|
|
struct spi_flash *spi;
|
|
unsigned char *buf;
|
|
|
|
if (argc != 3) {
|
|
buf = malloc(256);
|
|
if (!buf) {
|
|
printf("%s: malloc failed.\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
get_sh_eth_mac_raw(buf, 256);
|
|
|
|
/* print current MAC address */
|
|
for (i = 0; i < SH7752EVB_ETHERNET_NUM_CH; i++) {
|
|
get_sh_eth_mac(i, mac_string, buf);
|
|
printf("GETHERC ch%d = %s\n", i, mac_string);
|
|
}
|
|
free(buf);
|
|
return 0;
|
|
}
|
|
|
|
/* new setting */
|
|
memset(mac_string, 0xff, sizeof(mac_string));
|
|
sprintf(mac_string, "%s\t%s",
|
|
argv[1], argv[2]);
|
|
|
|
/* write MAC data to SPI rom */
|
|
spi = spi_flash_probe(0, 0, 1000000, SPI_MODE_3);
|
|
if (!spi) {
|
|
printf("%s: spi_flash probe failed.\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
ret = spi_flash_erase(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
|
|
SH7752EVB_SPI_SECTOR_SIZE);
|
|
if (ret) {
|
|
printf("%s: spi_flash erase failed.\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
ret = spi_flash_write(spi, SH7752EVB_ETHERNET_MAC_BASE_SPI,
|
|
sizeof(mac_string), mac_string);
|
|
if (ret) {
|
|
printf("%s: spi_flash write failed.\n", __func__);
|
|
spi_flash_free(spi);
|
|
return 1;
|
|
}
|
|
spi_flash_free(spi);
|
|
|
|
puts("The writing of the MAC address to SPI ROM was completed.\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
write_mac, 3, 1, do_write_mac,
|
|
"write MAC address for GETHERC",
|
|
"[GETHERC ch0] [GETHERC ch1]\n"
|
|
);
|