395f12976c
For DK1/DK2 boards, check if power supply provides enough current to allow the board to boot correctly. ADC@0 channel 18 and 19 are connected to USB type-C CC1 and CC2 signals. The table below shows the behavior for different range of CC1 or CC2: range | power supply | red led | console message (Volts) | (Amps) | blinks | --------------|--------------|---------|----------------------------------- [2.10 - 1.23[ | 3 | NO | NO [1.23 - 0.66[ | 1.5 | 3 times | WARNING 1.5A power supply detected [0.66 - 0] | 0.5 | 2 times | WARNING 500mA power supply detected If detected current is < 3A, red led is kept ON after blinking. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> |
||
|---|---|---|
| .. | ||
| stih410-b2260 | ||
| stm32f429-discovery | ||
| stm32f429-evaluation | ||
| stm32f469-discovery | ||
| stm32f746-disco | ||
| stm32h743-disco | ||
| stm32h743-eval | ||
| stm32mp1 | ||
| stv0991 | ||