leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3682cc3d2c
u-boot/include/configs/QS860T.h
Wolfgang Denk 25ddd1fb0a Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not
being able to use "sizeof(struct global_data)" in assembler files.
Recent experience has shown that manual synchronization is not
reliable enough.  This patch renames CONFIG_SYS_GBL_DATA_SIZE into
GENERATED_GBL_DATA_SIZE which gets automatically generated by the
asm-offsets tool.  In the result, all definitions of this value can be
deleted from the board config files.  We have to make sure that all
files that reference such data include the new <asm-offsets.h> file.

No other changes have been done yet, but it is obvious that similar
changes / simplifications can be done for other, related macro
definitions as well.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
2010-10-26 21:05:30 +02:00

413 lines
13 KiB
C
Raw Blame History

/*
* (C) Copyright 2003
* MuLogic B.V.
*
* (C) Copyright 2002
* Simple Network Magic Corporation
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* various debug settings */
#undef CONFIG_SYS_DEVICE_NULLDEV /* null device */
#undef CONFIG_SILENT_CONSOLE /* silent console */
#undef CONFIG_SYS_CONSOLE_INFO_QUIET /* silent console ? */
#undef DEBUG_FLASH /* debug flash code */
#undef FLASH_DEBUG /* debug fash code */
#undef DEBUG_ENV /* debug environment code */
#define CONFIG_SYS_DIRECT_FLASH_TFTP 1 /* allow direct tftp to flash */
#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
#define CONFIG_QS860T 1 /* ...on a QS860T module */
/* Start address of 512K Socketed Flash */
#define CONFIG_SYS_TEXT_BASE 0xFFF00000
#define CONFIG_FEC_ENET 1 /* FEC 10/100BaseT ethernet */
#define CONFIG_MII
#define FEC_INTERRUPT SIU_LEVEL1
#undef CONFIG_SCC1_ENET /* SCC1 10BaseT ethernet */
#define CONFIG_SYS_DISCOVER_PHY
#undef CONFIG_8xx_CONS_SMC1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC */
#undef CONFIG_8xx_CONS_NONE
#define CONFIG_BAUDRATE 38400 /* console baudrate = 38.4kbps */
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
/* Pass clocks to Linux 2.4.18 in Hz */
#undef CONFIG_CLOCKS_IN_MHZ /* clocks passsed to Linux in MHz */
#define CONFIG_PREBOOT "echo;" \
"echo 'Type \\\"run flash_nfs\\\" to mount root filesystem over NFS';" \
"echo"
#undef CONFIG_BOOTARGS
/* TODO compare against CADM860 */
#define CONFIG_BOOTCOMMAND "bootp; " \
"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \
"bootm"
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */
#undef CONFIG_WATCHDOG /* watchdog disabled */
#undef CONFIG_STATUS_LED /* Status LED disabled */
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
/*
* BOOTP options
*/
#define CONFIG_BOOTP_SUBNETMASK
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_MAC_PARTITION
#define CONFIG_DOS_PARTITION
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
/*
* Command line configuration.
*/
#include <config_cmd_default.h>
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_IMMAP
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_NET
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_DATE
/* TODO */
#if 0
/* Look at these */
CONFIG_IPADDR
CONFIG_SERVERIP
CONFIG_I2C
CONFIG_SPI
#endif
/*
* Environment variable storage is in NVRAM
*/
#define CONFIG_ENV_IS_IN_NVRAM 1
#define CONFIG_ENV_SIZE 0x00001000 /* We use only the last 4K for PPCBoot */
#define CONFIG_ENV_ADDR 0xD100E000
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
/* TODO - size? */
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works */
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/*-----------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*/
/*-----------------------------------------------------------------------
* Internal Memory Mapped Register
*/
#define CONFIG_SYS_IMMR 0xF0000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*/
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR
#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFF00000
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/* TODO flash parameters */
/*-----------------------------------------------------------------------
* FLASH organization for Intel Strataflash
*/
#define CONFIG_SYS_FLASH_16BIT 1 /* 16-bit wide flash memory */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CONFIG_SYS_MAX_FLASH_SECT 64 /* max number of sectors on one chip */
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#undef CONFIG_ENV_IS_IN_FLASH
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
/*-----------------------------------------------------------------------
* SYPCR - System Protection Control 11-9
* SYPCR can only be written once after reset!
*-----------------------------------------------------------------------
* Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
*/
#if defined(CONFIG_WATCHDOG)
#define CONFIG_SYS_SYPCR (0xFFFFFF88 | SYPCR_SWE | SYPCR_SWRI)
#else
#define CONFIG_SYS_SYPCR 0xFFFFFF88
#endif
/*-----------------------------------------------------------------------
* SIUMCR - SIU Module Configuration 11-6
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_SIUMCR 0x00620000
/*-----------------------------------------------------------------------
* TBSCR - Time Base Status and Control 11-26
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_TBSCR 0x00C3
/*-----------------------------------------------------------------------
* RTCSC - Real-Time Clock Status and Control Register 11-27
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
/*-----------------------------------------------------------------------
* PISCR - Periodic Interrupt Status and Control 11-31
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_PISCR 0x0082
/*-----------------------------------------------------------------------
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*-----------------------------------------------------------------------
*/
#define CONFIG_SYS_PLPRCR 0x0090D000
/*-----------------------------------------------------------------------
* SCCR - System Clock and reset Control Register 15-27
*-----------------------------------------------------------------------
*/
#define SCCR_MASK SCCR_EBDF11
#define CONFIG_SYS_SCCR 0x02000000
/*-----------------------------------------------------------------------
* Debug Enable Register
* 0x73E67C0F - All interrupts handled by BDM
* 0x00824001 - Only interrupts needed by MWDebug.exe handled by BDM
*-----------------------------------------------------------------------
#define CONFIG_SYS_DER 0x73E67C0F
*/
#define CONFIG_SYS_DER 0x0082400F
/*-----------------------------------------------------------------------
* Memory Controller Initialization Constants
*-----------------------------------------------------------------------
*/
/*
* BR0 and OR0 (AMD 512K Socketed FLASH)
* Base address = 0xFFF0_0000 - 0xFFF7_FFFF (After relocation)
*/
#define CONFIG_SYS_PRELIM_OR_AM
#define CONFIG_SYS_OR_TIMING_FLASH
#define FLASH_BASE0_PRELIM 0xFFF00001
#define CONFIG_SYS_OR0_PRELIM 0xFFF80D42
#define CONFIG_SYS_BR0_PRELIM 0xFFF00401
/*
* BR1 and OR1 (Intel 8M StrataFLASH)
* Base address = 0xD000_0000 - 0xD07F_FFFF
*/
#define FLASH_BASE1_PRELIM 0xD0000000
#define CONFIG_SYS_OR1_PRELIM 0xFF800D42
#define CONFIG_SYS_BR1_PRELIM 0xD0000801
/* #define CONFIG_SYS_OR1 0xFF800D42 */
/* #define CONFIG_SYS_BR1 0xD0000801 */
/*
* BR2 and OR2 (SDRAM)
* Base Address = 0x00000000 - 0x00FF_FFFF (16M After relocation)
* Base Address = 0x00000000 - 0x03FF_FFFF (64M After relocation)
* Base Address = 0x00000000 - 0x07FF_FFFF (128M After relocation)
*
*/
#define SDRAM_BASE 0x00000000 /* SDRAM bank */
#define SDRAM_PRELIM_OR_AM 0xF8000000 /* map max. 128 MB */
/* SDRAM timing */
#define SDRAM_TIMING 0x00000A00
/* For boards with 16M of SDRAM */
#define SDRAM_16M_MAX_SIZE 0x01000000 /* max 16MB SDRAM */
#define CONFIG_SYS_16M_MBMR 0x18802114 /* Mem Periodic Timer Prescaler */
/* For boards with 64M of SDRAM */
#define SDRAM_64M_MAX_SIZE 0x04000000 /* max 64MB SDRAM */
/* TODO - determine real value */
#define CONFIG_SYS_64M_MBMR 0x18802114 /* Mem Period Timer Prescaler */
#define CONFIG_SYS_OR2 (SDRAM_PRELIM_OR_AM | SDRAM_TIMING)
#define CONFIG_SYS_BR2 (SDRAM_BASE | 0x000000C1)
/*
* BR3 and OR3 (NVRAM, Sipex, NAND Flash)
* Base address = 0xD100_0000 - 0xD100_FFFF (64K NVRAM)
* Base address = 0xD108_0000 - 0xD108_0000 (Sipex chip ctl register)
* Base address = 0xD110_0000 - 0xD110_0000 (NAND ctl register)
* Base address = 0xD138_0000 - 0xD138_0000 (LED ctl register)
*
*/
#define CONFIG_SYS_OR3_PRELIM 0xFFC00DF6
#define CONFIG_SYS_BR3_PRELIM 0xD1000401
/* #define CONFIG_SYS_OR3 0xFFC00DF6 */
/* #define CONFIG_SYS_BR3 0xD1000401 */
/*
* BR4 and OR4 (Unused)
* Base address = 0xE000_0000 - 0xE3FF_FFFF
*
*/
#define CONFIG_SYS_OR4_PRELIM 0xFF000000
#define CONFIG_SYS_BR4_PRELIM 0xE0000000
/* #define CONFIG_SYS_OR4 0xFF000000 */
/* #define CONFIG_SYS_BR4 0xE0000000 */
/*
* BR5 and OR5 (Expansion bus)
* Base address = 0xE400_0000 - 0xE7FF_FFFF
*
*/
#define CONFIG_SYS_OR5_PRELIM 0xFF000000
#define CONFIG_SYS_BR5_PRELIM 0xE4000000
/* #define CONFIG_SYS_OR5 0xFF000000 */
/* #define CONFIG_SYS_BR5 0xE4000000 */
/*
* BR6 and OR6 (Expansion bus)
* Base address = 0xE800_0000 - 0xEBFF_FFFF
*
*/
#define CONFIG_SYS_OR6_PRELIM 0xFF000000
#define CONFIG_SYS_BR6_PRELIM 0xE8000000
/* #define CONFIG_SYS_OR6 0xFF000000 */
/* #define CONFIG_SYS_BR6 0xE8000000 */
/*
* BR7 and OR7 (Expansion bus)
* Base address = 0xEC00_0000 - 0xEFFF_FFFF
*
*/
#define CONFIG_SYS_OR7_PRELIM 0xFF000000
#define CONFIG_SYS_BR7_PRELIM 0xE8000000
/* #define CONFIG_SYS_OR7 0xFF000000 */
/* #define CONFIG_SYS_BR7 0xE8000000 */
/*
* Sanity checks
*/
#if defined(CONFIG_SCC1_ENET) && defined(CONFIG_FEC_ENET)
#error Both CONFIG_SCC1_ENET and CONFIG_FEC_ENET configured
#endif
#endif /* __CONFIG_H */
Reference in New Issue View Git Blame Copy Permalink