u-boot/configs/bayleybay_defconfig
Tero Kristo 2509493cc1 net: convert TFTP_TSIZE to proper Kconfig option
TFTP transfer size can be used to re-size the TFTP progress bar on
single line based on the server reported file size. The support for
this has been around from 2019, but it was never converted to proper
Kconfig.

While adding this new Kconfig, enable it by default for OMAP2+ and K3
devices also.

Signed-off-by: Tero Kristo <kristo@kernel.org>
2021-06-08 21:38:51 -04:00

62 lines
1.4 KiB
Plaintext

CONFIG_X86=y
CONFIG_SYS_TEXT_BASE=0xFFF00000
CONFIG_NR_DRAM_BANKS=8
CONFIG_ENV_SIZE=0x1000
CONFIG_ENV_OFFSET=0x6FF000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="bayleybay"
CONFIG_VENDOR_INTEL=y
CONFIG_TARGET_BAYLEYBAY=y
CONFIG_INTERNAL_UART=y
CONFIG_SMP=y
CONFIG_HAVE_VGA_BIOS=y
CONFIG_VGA_BIOS_ADDR=0xfffb0000
CONFIG_GENERATE_PIRQ_TABLE=y
CONFIG_GENERATE_MP_TABLE=y
CONFIG_GENERATE_ACPI_TABLE=y
CONFIG_SEABIOS=y
CONFIG_FIT=y
CONFIG_BOOTSTAGE=y
CONFIG_BOOTSTAGE_REPORT=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/sdb3 init=/sbin/init rootwait ro"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CPU=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PART=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PING=y
CONFIG_CMD_TIME=y
CONFIG_CMD_BOOTSTAGE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_MAC_PARTITION=y
CONFIG_ISO_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_ENV_OVERWRITE=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_TFTP_TSIZE=y
CONFIG_REGMAP=y
CONFIG_SYSCON=y
CONFIG_CPU=y
CONFIG_E1000=y
CONFIG_SPI=y
CONFIG_USB_STORAGE=y
CONFIG_USB_KEYBOARD=y
CONFIG_FRAMEBUFFER_SET_VESA_MODE=y
CONFIG_FRAMEBUFFER_VESA_MODE_11B=y
CONFIG_CONSOLE_SCROLL_LINES=5
# CONFIG_GZIP is not set