u-boot/configs/pg_wcom_seli8_update_defconfig
Holger Brunck bfd4e660de board/pg_wcom: rework defconfig
Switch off SCSI related config options to get rid of the board
removal warning. We don't use this interface. Also disable UBIFS
to decrease the image size, as this is also not used.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>
2023-01-02 16:06:08 -05:00

106 lines
2.9 KiB
Plaintext

CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=8333333
CONFIG_TARGET_PG_WCOM_SELI8=y
CONFIG_TEXT_BASE=0x60240000
CONFIG_SYS_MALLOC_LEN=0x1004000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x4000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
# CONFIG_HAS_ARMV7_SECURE_BASE is not set
CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_ENV_ADDR=0x60220000
# CONFIG_DEEP_SLEEP is not set
CONFIG_LAYERSCAPE_NS_ACCESS=y
CONFIG_KM_COMMON_ETH_INIT=y
CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3
CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y
CONFIG_PG_WCOM_UBOOT_UPDATE=y
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x9fffffff
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_MONITOR_LEN=1048576
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0"
CONFIG_SILENT_CONSOLE=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_MISC_INIT_R=y
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_CBSIZE=512
CONFIG_SYS_PBSIZE=532
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_CMD_IMLS=y
CONFIG_CMD_GREPENV=y
CONFIG_CMD_MEMINFO=y
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_LOADS_ECHO=y
CONFIG_SYS_LOADS_BAUD_CHANGE=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_BOOTP_BOOTFILESIZE=y
CONFIG_CMD_CRAMFS=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash"
CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)"
CONFIG_CMD_UBI=y
# CONFIG_CMD_UBIFS is not set
CONFIG_OF_CONTROL=y
CONFIG_ENV_SOURCE_FILE="pg-wcom-seli8"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_ADDR_REDUND=0x60200000
CONFIG_USE_ETHPRIME=y
CONFIG_ETHPRIME="ethernet@2d90000"
CONFIG_USE_HOSTNAME=y
CONFIG_HOSTNAME="SELI8"
CONFIG_VERSION_VARIABLE=y
# CONFIG_SCSI_AHCI is not set
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_SYS_BOOTCOUNT_BE=y
CONFIG_DDR_CLK_FREQ=50000000
CONFIG_SYS_FSL_DDR3=y
CONFIG_SYS_I2C_LEGACY=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_FLASH_CFI_DRIVER=y
CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS=y
CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
CONFIG_SYS_FLASH_EMPTY_INFO=y
CONFIG_FLASH_CFI_MTD=y
CONFIG_SYS_FLASH_CFI=y
CONFIG_SYS_FLASH_QUIET_TEST=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_FSL_IFC=y
CONFIG_SYS_NAND_ONFI_DETECTION=y
CONFIG_PHY_MARVELL=y
CONFIG_PHY_FIXED=y
CONFIG_DM_MDIO=y
CONFIG_PHY_GIGE=y
CONFIG_MII=y
CONFIG_TSEC_ENET=y
CONFIG_SYS_QE_FW_ADDR=0x60020000
# CONFIG_SCSI is not set
CONFIG_SPECIFY_CONSOLE_INDEX=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_POST=y
CONFIG_LZO=y