u-boot/include/scmi_protocols.h
Etienne Carriere 7c33f78983 clk: scmi: register scmi clocks with CCF
Implements SCMI APIs to retrieve the number exposed SCMI clocks using
SCMI_PROTOCOL_ATTRIBUTES messages and the names of the clocks using
SCMI_CLOCK_ATTRIBUTES messages.

This change updates sandbox SCMI clock test driver to manage these
2 new message IDs.

Cc: Lukasz Majewski <lukma@denx.de>
Cc: Sean Anderson <seanga2@gmail.com>
Cc: Clement Leger <clement.leger@bootlin.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
2022-03-02 17:42:06 -05:00

336 lines
7.6 KiB
C

/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */
/*
* Copyright (c) 2015-2019, Arm Limited and Contributors. All rights reserved.
* Copyright (C) 2019-2020, Linaro Limited
*/
#ifndef _SCMI_PROTOCOLS_H
#define _SCMI_PROTOCOLS_H
#include <linux/bitops.h>
#include <asm/types.h>
/*
* Subset the SCMI protocols definition
* based on SCMI specification v2.0 (DEN0056B)
* https://developer.arm.com/docs/den0056/b
*/
enum scmi_std_protocol {
SCMI_PROTOCOL_ID_BASE = 0x10,
SCMI_PROTOCOL_ID_POWER_DOMAIN = 0x11,
SCMI_PROTOCOL_ID_SYSTEM = 0x12,
SCMI_PROTOCOL_ID_PERF = 0x13,
SCMI_PROTOCOL_ID_CLOCK = 0x14,
SCMI_PROTOCOL_ID_SENSOR = 0x15,
SCMI_PROTOCOL_ID_RESET_DOMAIN = 0x16,
SCMI_PROTOCOL_ID_VOLTAGE_DOMAIN = 0x17,
};
enum scmi_status_code {
SCMI_SUCCESS = 0,
SCMI_NOT_SUPPORTED = -1,
SCMI_INVALID_PARAMETERS = -2,
SCMI_DENIED = -3,
SCMI_NOT_FOUND = -4,
SCMI_OUT_OF_RANGE = -5,
SCMI_BUSY = -6,
SCMI_COMMS_ERROR = -7,
SCMI_GENERIC_ERROR = -8,
SCMI_HARDWARE_ERROR = -9,
SCMI_PROTOCOL_ERROR = -10,
};
/*
* Generic message IDs
*/
enum scmi_discovery_id {
SCMI_PROTOCOL_VERSION = 0x0,
SCMI_PROTOCOL_ATTRIBUTES = 0x1,
SCMI_PROTOCOL_MESSAGE_ATTRIBUTES = 0x2,
};
/*
* SCMI Clock Protocol
*/
enum scmi_clock_message_id {
SCMI_CLOCK_ATTRIBUTES = 0x3,
SCMI_CLOCK_RATE_SET = 0x5,
SCMI_CLOCK_RATE_GET = 0x6,
SCMI_CLOCK_CONFIG_SET = 0x7,
};
#define SCMI_CLK_PROTO_ATTR_COUNT_MASK GENMASK(15, 0)
#define SCMI_CLK_RATE_ASYNC_NOTIFY BIT(0)
#define SCMI_CLK_RATE_ASYNC_NORESP (BIT(0) | BIT(1))
#define SCMI_CLK_RATE_ROUND_DOWN 0
#define SCMI_CLK_RATE_ROUND_UP BIT(2)
#define SCMI_CLK_RATE_ROUND_CLOSEST BIT(3)
#define SCMI_CLOCK_NAME_LENGTH_MAX 16
/**
* struct scmi_clk_get_nb_out - Response for SCMI_PROTOCOL_ATTRIBUTES command
* @status: SCMI command status
* @attributes: Attributes of the clock protocol, mainly number of clocks exposed
*/
struct scmi_clk_protocol_attr_out {
s32 status;
u32 attributes;
};
/**
* struct scmi_clk_attribute_in - Message payload for SCMI_CLOCK_ATTRIBUTES command
* @clock_id: SCMI clock ID
*/
struct scmi_clk_attribute_in {
u32 clock_id;
};
/**
* struct scmi_clk_get_nb_out - Response payload for SCMI_CLOCK_ATTRIBUTES command
* @status: SCMI command status
* @attributes: clock attributes
* @clock_name: name of the clock
*/
struct scmi_clk_attribute_out {
s32 status;
u32 attributes;
char clock_name[SCMI_CLOCK_NAME_LENGTH_MAX];
};
/**
* struct scmi_clk_state_in - Message payload for CLOCK_CONFIG_SET command
* @clock_id: SCMI clock ID
* @attributes: Attributes of the targets clock state
*/
struct scmi_clk_state_in {
u32 clock_id;
u32 attributes;
};
/**
* struct scmi_clk_state_out - Response payload for CLOCK_CONFIG_SET command
* @status: SCMI command status
*/
struct scmi_clk_state_out {
s32 status;
};
/**
* struct scmi_clk_state_in - Message payload for CLOCK_RATE_GET command
* @clock_id: SCMI clock ID
* @attributes: Attributes of the targets clock state
*/
struct scmi_clk_rate_get_in {
u32 clock_id;
};
/**
* struct scmi_clk_rate_get_out - Response payload for CLOCK_RATE_GET command
* @status: SCMI command status
* @rate_lsb: 32bit LSB of the clock rate in Hertz
* @rate_msb: 32bit MSB of the clock rate in Hertz
*/
struct scmi_clk_rate_get_out {
s32 status;
u32 rate_lsb;
u32 rate_msb;
};
/**
* struct scmi_clk_state_in - Message payload for CLOCK_RATE_SET command
* @flags: Flags for the clock rate set request
* @clock_id: SCMI clock ID
* @rate_lsb: 32bit LSB of the clock rate in Hertz
* @rate_msb: 32bit MSB of the clock rate in Hertz
*/
struct scmi_clk_rate_set_in {
u32 flags;
u32 clock_id;
u32 rate_lsb;
u32 rate_msb;
};
/**
* struct scmi_clk_rate_set_out - Response payload for CLOCK_RATE_SET command
* @status: SCMI command status
*/
struct scmi_clk_rate_set_out {
s32 status;
};
/*
* SCMI Reset Domain Protocol
*/
enum scmi_reset_domain_message_id {
SCMI_RESET_DOMAIN_ATTRIBUTES = 0x3,
SCMI_RESET_DOMAIN_RESET = 0x4,
};
#define SCMI_RD_NAME_LEN 16
#define SCMI_RD_ATTRIBUTES_FLAG_ASYNC BIT(31)
#define SCMI_RD_ATTRIBUTES_FLAG_NOTIF BIT(30)
#define SCMI_RD_RESET_FLAG_ASYNC BIT(2)
#define SCMI_RD_RESET_FLAG_ASSERT BIT(1)
#define SCMI_RD_RESET_FLAG_CYCLE BIT(0)
/**
* struct scmi_rd_attr_in - Payload for RESET_DOMAIN_ATTRIBUTES message
* @domain_id: SCMI reset domain ID
*/
struct scmi_rd_attr_in {
u32 domain_id;
};
/**
* struct scmi_rd_attr_out - Payload for RESET_DOMAIN_ATTRIBUTES response
* @status: SCMI command status
* @attributes: Retrieved attributes of the reset domain
* @latency: Reset cycle max lantency
* @name: Reset domain name
*/
struct scmi_rd_attr_out {
s32 status;
u32 attributes;
u32 latency;
char name[SCMI_RD_NAME_LEN];
};
/**
* struct scmi_rd_reset_in - Message payload for RESET command
* @domain_id: SCMI reset domain ID
* @flags: Flags for the reset request
* @reset_state: Reset target state
*/
struct scmi_rd_reset_in {
u32 domain_id;
u32 flags;
u32 reset_state;
};
/**
* struct scmi_rd_reset_out - Response payload for RESET command
* @status: SCMI command status
*/
struct scmi_rd_reset_out {
s32 status;
};
/*
* SCMI Voltage Domain Protocol
*/
enum scmi_voltage_domain_message_id {
SCMI_VOLTAGE_DOMAIN_ATTRIBUTES = 0x3,
SCMI_VOLTAGE_DOMAIN_CONFIG_SET = 0x5,
SCMI_VOLTAGE_DOMAIN_CONFIG_GET = 0x6,
SCMI_VOLTAGE_DOMAIN_LEVEL_SET = 0x7,
SCMI_VOLTAGE_DOMAIN_LEVEL_GET = 0x8,
};
#define SCMI_VOLTD_NAME_LEN 16
#define SCMI_VOLTD_CONFIG_MASK GENMASK(3, 0)
#define SCMI_VOLTD_CONFIG_OFF 0
#define SCMI_VOLTD_CONFIG_ON 0x7
/**
* struct scmi_voltd_attr_in - Payload for VOLTAGE_DOMAIN_ATTRIBUTES message
* @domain_id: SCMI voltage domain ID
*/
struct scmi_voltd_attr_in {
u32 domain_id;
};
/**
* struct scmi_voltd_attr_out - Payload for VOLTAGE_DOMAIN_ATTRIBUTES response
* @status: SCMI command status
* @attributes: Retrieved attributes of the voltage domain
* @name: Voltage domain name
*/
struct scmi_voltd_attr_out {
s32 status;
u32 attributes;
char name[SCMI_VOLTD_NAME_LEN];
};
/**
* struct scmi_voltd_config_set_in - Message payload for VOLTAGE_CONFIG_SET cmd
* @domain_id: SCMI voltage domain ID
* @config: Configuration data of the voltage domain
*/
struct scmi_voltd_config_set_in {
u32 domain_id;
u32 config;
};
/**
* struct scmi_voltd_config_set_out - Response for VOLTAGE_CONFIG_SET command
* @status: SCMI command status
*/
struct scmi_voltd_config_set_out {
s32 status;
};
/**
* struct scmi_voltd_config_get_in - Message payload for VOLTAGE_CONFIG_GET cmd
* @domain_id: SCMI voltage domain ID
*/
struct scmi_voltd_config_get_in {
u32 domain_id;
};
/**
* struct scmi_voltd_config_get_out - Response for VOLTAGE_CONFIG_GET command
* @status: SCMI command status
* @config: Configuration data of the voltage domain
*/
struct scmi_voltd_config_get_out {
s32 status;
u32 config;
};
/**
* struct scmi_voltd_level_set_in - Message payload for VOLTAGE_LEVEL_SET cmd
* @domain_id: SCMI voltage domain ID
* @flags: Parameter flags for configuring target level
* @voltage_level: Target voltage level in microvolts (uV)
*/
struct scmi_voltd_level_set_in {
u32 domain_id;
u32 flags;
s32 voltage_level;
};
/**
* struct scmi_voltd_level_set_out - Response for VOLTAGE_LEVEL_SET command
* @status: SCMI command status
*/
struct scmi_voltd_level_set_out {
s32 status;
};
/**
* struct scmi_voltd_level_get_in - Message payload for VOLTAGE_LEVEL_GET cmd
* @domain_id: SCMI voltage domain ID
*/
struct scmi_voltd_level_get_in {
u32 domain_id;
};
/**
* struct scmi_voltd_level_get_out - Response for VOLTAGE_LEVEL_GET command
* @status: SCMI command status
* @voltage_level: Voltage level in microvolts (uV)
*/
struct scmi_voltd_level_get_out {
s32 status;
s32 voltage_level;
};
#endif /* _SCMI_PROTOCOLS_H */