b39cacc268
Changes in relation to FriendlyARM's U-Boot nanopi2-v2016.01: - Configuration changed, mainly several "CONFIG_..." moved from s5p4418_nanopi2.h to s5p4418_nanopi2_defconfig and USB related configs removed because USB is not supported yet. - s5p4418_nanopi2.h: "CONFIG_" removed from several s5p4418/nanopi2 specific defines because the appropriate values do not need to be configurable. - pinctrl is supported now, therefore "CONFIG_PINCTRL=y" added to s5p4418_nanopi2_defconfig. Signed-off-by: Stefan Bosch <stefan_b@posteo.net>
64 lines
1.3 KiB
Plaintext
64 lines
1.3 KiB
Plaintext
|
|
Summary
|
|
=======
|
|
|
|
This README is about U-Boot support for SAMSUNG's/NEXELL's ARM Cortex-A9 based
|
|
S5P4418 SoC. It is based on FriendlyARM's U-Boot v2016.01 for the NanoPi2
|
|
(and other) boards [1].
|
|
|
|
Currently the following boards are supported:
|
|
|
|
* FriendlyArm NanoPi2 [2]
|
|
* FriendlyArm NanoPC-T2 [3]
|
|
|
|
|
|
Build
|
|
=====
|
|
|
|
* NanoPi2 and NanoPC-T2
|
|
|
|
make s5p4418_nanopi2_defconfig
|
|
make
|
|
|
|
|
|
Installation
|
|
============
|
|
|
|
- Download Official-ROMs-SDCard-20190718.7z from [4] (images files for android,
|
|
friendlyCore and LUbuntu)
|
|
- Use s5p4418-sd-lubuntu-desktop-xenial-4.4-armhf-20190718.img to make a SD-card
|
|
- Use dd in the directory where U-Boot has been built to update U-Boot:
|
|
(replace <SD-card> with the device used for the SD-card, e.g. sdc)
|
|
sudo dd seek=3841 if=u-boot.bin of=/dev/<SD-card>
|
|
- Boot the board from this SD-card
|
|
|
|
The source code for (the used?) LUbuntu 16.04 can be found at [5].
|
|
|
|
|
|
Links
|
|
=====
|
|
|
|
[1] FriendlyArm U-boot v2016.01:
|
|
|
|
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01
|
|
|
|
|
|
[2] NanoPi2:
|
|
|
|
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_2
|
|
|
|
|
|
[3] NanoPC-T2:
|
|
|
|
http://wiki.friendlyarm.com/wiki/index.php/NanoPC-T2
|
|
|
|
|
|
[4] FriendlyArm image files for NanoPi2:
|
|
|
|
http://download.friendlyarm.com//NanoPi2
|
|
|
|
|
|
[5] FriendlyArm LUbuntu 16.04 Source Code for NanoPi2:
|
|
|
|
https://github.com/friendlyarm/linux/tree/nanopi2-v4.4.y
|