u-boot/configs/ventana_defconfig
Tom Rini d14f3f2725 Convert CONFIG_TEGRA_ENABLE_UARTA et al to Kconfig
This converts the following to Kconfig:
   CONFIG_TEGRA_ENABLE_UARTA
   CONFIG_TEGRA_ENABLE_UARTB
   CONFIG_TEGRA_ENABLE_UARTC
   CONFIG_TEGRA_ENABLE_UARTD
   CONFIG_TEGRA_SPI
   CONFIG_TEGRA_UARTA_GPU
   CONFIG_TEGRA_UARTA_SDIO1
   CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3
   CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-22 10:31:48 -05:00

60 lines
1.5 KiB
Plaintext

CONFIG_ARM=y
CONFIG_SYS_L2CACHE_OFF=y
CONFIG_ARCH_TEGRA=y
CONFIG_TEXT_BASE=0x00110000
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana"
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_SYS_PROMPT="Tegra20 (Ventana) # "
CONFIG_TEGRA20=y
CONFIG_TARGET_VENTANA=y
CONFIG_TEGRA_ENABLE_UARTD=y
CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_SPL_FOOTPRINT_LIMIT=y
CONFIG_SPL_MAX_FOOTPRINT=0x8000
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK=0xffffc
CONFIG_SYS_SPL_MALLOC=y
CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x90000
CONFIG_SYS_SPL_MALLOC_SIZE=0x10000
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2085
# CONFIG_CMD_IMI is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_MMC=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
# CONFIG_CMD_NFS is not set
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y
CONFIG_CMD_EXT4_WRITE=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_MMC=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_MMC_ENV_PART=2
CONFIG_SPL_DM=y
CONFIG_DM_PMIC=y
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_PWM_TEGRA=y
CONFIG_SYS_NS16550=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
CONFIG_USB_ULPI_VIEWPORT=y
CONFIG_USB_ULPI=y
CONFIG_USB_KEYBOARD=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_VIDEO=y
# CONFIG_VIDEO_BPP8 is not set
CONFIG_VIDEO_TEGRA20=y
CONFIG_CONSOLE_SCROLL_LINES=10