u-boot/configs/tplink_wdr4300_defconfig
Daniel Schwierzeck a29491ade0 MIPS: convert CONFIG_SYS_MIPS_TIMER_FREQ to Kconfig
This converts the following to Kconfig:
    CONFIG_SYS_MIPS_TIMER_REQ

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
2022-11-02 21:42:32 +01:00

64 lines
1.6 KiB
Plaintext

CONFIG_MIPS=y
CONFIG_TEXT_BASE=0xA1000000
CONFIG_SYS_MALLOC_LEN=0x40000
CONFIG_ENV_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300"
CONFIG_SYS_LOAD_ADDR=0xa1000000
CONFIG_ARCH_ATH79=y
CONFIG_BOARD_TPLINK_WDR4300=y
CONFIG_SYS_MIPS_TIMER_FREQ=280000000
CONFIG_SYS_MEMTEST_START=0x80100000
CONFIG_SYS_MEMTEST_END=0x83f00000
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xbd007fff
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="dhcp 192.168.1.1:wdr4300.fit && bootm $loadaddr"
CONFIG_DISPLAY_CPUINFO=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SYS_MALLOC_BOOTPARAMS=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_MAXARGS=32
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_XIMG is not set
CONFIG_CMD_MEMTEST=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
# CONFIG_CMD_MDIO is not set
CONFIG_CMD_PING=y
# CONFIG_ISO_PARTITION is not set
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_VERSION_VARIABLE=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_MTD=y
CONFIG_DM_SPI_FLASH=y
CONFIG_SPI_FLASH_ATMEL=y
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_SPANSION=y
CONFIG_SPI_FLASH_STMICRO=y
CONFIG_SPI_FLASH_SST=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_DATAFLASH=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_PHY_GIGE=y
CONFIG_AG7XXX=y
CONFIG_PINCTRL=y
CONFIG_DM_SERIAL=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_ATH79_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_LZMA=y