u-boot/configs/omap3_beagle_defconfig
Tom Rini 08574ed339 Convert CONFIG_SYS_MONITOR_LEN to Kconfig
This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-10 10:08:55 -05:00

119 lines
3.2 KiB
Plaintext

CONFIG_ARM=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_ARCH_OMAP2PLUS=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_NR_DRAM_BANKS=2
CONFIG_DEFAULT_DEVICE_TREE="omap3-beagle"
CONFIG_SPL_TEXT_BASE=0x40200000
CONFIG_TARGET_OMAP3_BEAGLE=y
CONFIG_SYS_PROMPT="BeagleBoard # "
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x4020ff00
CONFIG_SYS_MONITOR_LEN=262144
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="omap3-beagle.dtb"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_MAX_SIZE=0xec00
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SYS_SPL_MALLOC=y
CONFIG_SYS_SPL_MALLOC_SIZE=0x800000
# CONFIG_SPL_FS_EXT4 is not set
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_SIMPLE=y
CONFIG_SPL_NAND_BASE=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=1055
CONFIG_CMD_SPL=y
CONFIG_CMD_SPL_NAND_OFS=0x280000
CONFIG_CMD_SPL_WRITE_SIZE=0x20000
CONFIG_CMD_ASKENV=y
# CONFIG_CMD_FLASH is not set
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_NAND=y
CONFIG_CMD_NAND_TRIMFFS=y
CONFIG_CMD_SPI=y
CONFIG_CMD_USB=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FS_UUID=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0"
CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(spl),1920k(u-boot),128k(u-boot-env),128k(dtb),6m(kernel),-(rootfs)"
CONFIG_CMD_UBI=y
# CONFIG_ISO_PARTITION is not set
# CONFIG_SPL_EFI_PARTITION is not set
CONFIG_SPL_PARTITION_UUIDS=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_SPL_REMOVE_PROPS="clocks clock-names interrupt-parent"
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_VERSION_VARIABLE=y
CONFIG_SPL_DM=y
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_OF_TRANSLATE=y
CONFIG_USB_FUNCTION_FASTBOOT=y
CONFIG_FASTBOOT_BUF_ADDR=0x82000000
CONFIG_SYS_I2C_LEGACY=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_LED_STATUS=y
CONFIG_LED_STATUS0=y
CONFIG_LED_STATUS_BIT=1
CONFIG_LED_STATUS_STATE=2
CONFIG_LED_STATUS1=y
CONFIG_LED_STATUS_BIT1=2
CONFIG_LED_STATUS_STATE1=2
CONFIG_LED_STATUS_BOOT_ENABLE=y
CONFIG_LED_STATUS_BOOT=1
CONFIG_LED_STATUS_GREEN_ENABLE=y
CONFIG_LED_STATUS_GREEN=2
CONFIG_LED_STATUS_CMD=y
CONFIG_TWL4030_LED=y
CONFIG_MMC_OMAP_HS=y
CONFIG_MTD=y
CONFIG_MTD_RAW_NAND=y
CONFIG_NAND_OMAP_ECCSCHEME_HAM1_CODE_HW=y
CONFIG_SYS_NAND_BLOCK_SIZE=0x20000
CONFIG_SYS_NAND_PAGE_COUNT=0x40
CONFIG_SYS_NAND_PAGE_SIZE=0x800
CONFIG_SYS_NAND_OOBSIZE=0x40
CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_DM_PMIC=y
# CONFIG_SPL_PMIC_CHILDREN is not set
CONFIG_DM_REGULATOR=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
CONFIG_OMAP3_SPI=y
CONFIG_USB=y
# CONFIG_SPL_DM_USB is not set
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OMAP3=y
CONFIG_USB_MUSB_GADGET=y
CONFIG_USB_MUSB_OMAP2PLUS=y
CONFIG_TWL4030_USB=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_USB_ETHER_MCS7830=y
CONFIG_USB_ETHER_SMSC95XX=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="TI"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
CONFIG_USB_ETHER=y
CONFIG_BCH=y