Fix build problems

Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
Patch by Andreas Engel, 19 Jul 2005

CHANGELOG

@@ -2,6 +2,261 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Minor code cleanup
+
+* Add forgotten new fils from latest VoiceBlue update
+
+* Make bootretry feature work with hush shell.
+  Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too.
+  Patch by Andreas Engel, 19 Jul 2005
+
+* Update Hymod Board Database PHP code in "tools" directory
+  Patch by Murray Jensen, 01 Jul 2005
+
+* Make "tr" command use POSIX compliant; export HOSTOS make variable
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Fix Murray Jensen's mail address.
+  Patch by Murray Jensen, 30 Jun 2005
+
+* Preserve PHY_BMCR during a soft reset.
+  Patch by Carl Riechers, 24 Jun 2005
+
+* VoiceBlue update: eeprom tool can also store firmware version now.
+  eeprom.bin is runable by jumping at load address.
+  Patch by Ladislav Michl, 23 May 2005
+
+* Move the AT91RM9200DK to the ARM Systems list.
+  Patch by Anders Larsen, 26 Apr 2005
+
+* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3
+  Patch by Anders Larsen, 26 Apr 2005
+
+* measure_gclk() is needed when DEBUG is enabled
+  Patch by Bryan O'Donoghue, 25 Apr 2005
+
+* Add UPD-Checksum code, fix problem in net.c (return instead of break)
+  Patch by Reinhard Arlt, 12 Aug 2005
+
+* esd PCI405 board updated
+  Patch by Matthias Fuchs, 28 Jul 2005
+
+* esd WUH405 and DU405 board updated
+  Patch by Matthias Fuchs, 27 Jul 2005
+
+* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I)
+  Patch by Matthias Fuchs, 4 May 2005
+
+* Update AMCC Yosemite to get a consistent setup for all AMCC eval
+  boards (baudrate, environment...). Flash driver fixed.
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add NAND FLASH support for AMCC Bamboo 440EP eval board
+  Patch by Stefan Roese, 11 Aug 2005
+
+* Add configuration for IFM AEV FIFO board.
+  Minor coding style cleanup.
+
+* Add configuration for IFM SPI eval board
+
+* Fix CompactFlash problem on HMI1001 board
+
+* Make new "mtdparts" code build with older compilers
+  Patch by Andrea Scian, 09 Aug 2005
+
+* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to
+  CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design
+  with the 405 defines and the linux kernel defines.
+  Patch by Stefan Roese, 08 Aug 2005
+
+* Fix compiler warnings with older GCC versions
+
+* Add common (with Linux) MTD partition scheme and "mtdparts" command
+
+  Old, obsolete and duplicated code was cleaned up and replace by the
+  new partitioning method. There are two possible approaches now:
+
+  The first one is to define a single, static partition:
+
+  #undef CONFIG_JFFS2_CMDLINE
+  #define CONFIG_JFFS2_DEV               "nor0"
+  #define CONFIG_JFFS2_PART_SIZE         0xFFFFFFFF	/* use whole device */
+  #define CONFIG_JFFS2_PART_SIZE         0x00100000	/* use 1MB */
+  #define CONFIG_JFFS2_PART_OFFSET       0x00000000
+
+  The second method uses the mtdparts command line option and dynamic
+  partitioning:
+
+  /* mtdparts command line support */
+  #define CONFIG_JFFS2_CMDLINE
+  #define MTDIDS_DEFAULT         "nor1=zuma-1,nor2=zuma-2"
+  #define MTDPARTS_DEFAULT       "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)"
+
+  Command line of course produces bigger images, and may be inappropriate
+  for some targets, so by default it's off.
+
+* Fix build problems for PM856 Board
+
+* Fix sign extension bug in 'fpga loadb' command;
+  make 'fpga loadb' always print the file header info
+  Patch by Andrew Dyer, 11 Jan 2005
+
+* Fix errors that occur when accessing SystemACE CF
+  Patch by Jeff Angielski, 09 Jan 2005
+
+* Document switching between U-Boot and PlanetCore on RPXlite
+  by Sam Song, 24 Dec 2004
+
+* Fix PowerQUICC II mask detection.
+  Patch by Eugene Surovegin, 20 Dec 2004
+
+* Add support for Altera NIOS DK1C20 board
+  Patch by Shlomo Kut, 13 Dec 2004
+
+* Add support for ep8248 board
+  Patch by Yuli Barcohen, 12 Dec 2004
+
+  Minor code cleanup.
+
+* Fix baudrate setting for KGDB on MPC8260
+  Patch by HoJin, 11 Dec 2004
+
+* Fix 'mii help' text formatting
+  Patch by Cory Tusar, 10 Dec 2004
+
+* Fix return code of NFS command
+  Patch by Hiroshi Ito, 11 Dec 2004
+
+* Fix typo
+
+* Fix compiler warnings in cpu/ppc4xx/usbdev.c
+  Patch by Steven Blakeslee, 04 Aug 2005
+
+* Add support for AMCC Bamboo PPC440EP eval board
+  Patch by Stefan Roese, 04 Aug 2005
+
+* Patch by Jon Loeliger
+  Fix style issues primarily in 85xx and 83xx boards.
+    - C++ comments
+    - Trailing white space
+    - Indentation not by TAB
+    - Excessive amount of empty lines
+    - Trailing empty lines
+
+* Patch by Ron Alder, 11 Jul 2005
+    Add Xianghua Xiao and Lunsheng Wang's support for the
+    GDA MPC8540 EVAL board.
+
+* Patch by Eran Liberty
+  Add support for the Freescale MPC8349ADS board.
+
+* Patch by Jon Loeliger, 25 Jul 2005
+  Move the TSEC driver out of cpu/mpc85xx as it will be shared
+  by the upcoming mpc83xx family as well.
+
+* Patch by Jon Loeliger, 05 May 2005
+  Implemented support for MPC8548CDS board.
+  Added DDR II support based on SPD values for MPC85xx boards.
+  This roll-up patch also includes bugfies for the previously
+  published patches:
+    DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O
+
+* Patch by Jon Loeliger, 10 Feb 2005
+  Add config option CONFIG_HAS_FEC calling out 8540 FEC features.
+
+* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005
+  For MPC85xxCDS:
+    Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow
+    for faster flash parts.
+    Add documentation for BR/OR for FLASH.
+
+* Patch by Jon Loeliger 08 Feb 2005
+  Determine L2 Cache size dynamically on 85XX boards.
+
+* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005
+  - Convert the CPM2 based functionality to use new CONFIG_CPM2
+    option rather than a myriad of CONFIG_MPC8560-like variants.
+    Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560.
+    Eliminates the CONFIG_MPC8560 option entirely.  Distributes the
+    new CONFIG_CPM2 option to each 8260 board.
+
+* Add support for MicroSys PM856 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Minor fixes to PM854 board
+  Patch by Josef Wagner, 03 Aug 2005
+
+* Adjust configuration of XENIAX board
+  (chip select and GPIO required for USB operation)
+
+* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be
+  routed to the Watchdog handler
+  Patch by Eugene Surovegin, 18 Jun 2005
+
+* (re)enabled scsi commands do_scsi() and do_scsiboot()
+  Patch by Denis Peter, 06 Dec 2004
+
+* Fix endianess problem in TFTP / NFS default filenames
+  Patch by Hiroshi Ito, 06 Dec 2004
+
+* Ignore broadcast status bit in received frames in 8260 FCC ethernet
+  loopback test code
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Fix typo in mkconfig script (used == instead of =)
+  Patch by Murray Jensen, 18 Jul 2005
+
+* Cleanup build problems on 64 bit build hosts
+
+* Update MAINTAINERS file
+
+* Patch by Stefan Roese, 01 Aug 2005:
+  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+    for details.
+  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+    to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+  - Add support for AMCC PPC440EP/GR.
+  - Add support for AMCC Yosemite PPC440EP eval board.
+  - Add support for AMCC Yellowstone PPC440GR eval board.
+
+* Minor fixes for PPChameleon Board:
+  - fix alignment of NAND size
+  - make code do what the comment says
+
+* Implement h/w sector protection status synchronization at boot.
+  The code is provided for, and was tested on, the Yukon/Alaska
+  and PM520 boards only.
+
+  A bug in flash_real_protect() for the Yukon board was fixed by
+  adding a function that tells if two banks are on one flash chip.
+
+* Fix sysmon POST problem: check I2C error codes
+  This fixes a problem of displaying bogus voltages when the voltages
+  are so low that the I2C devices start failing while the rest of the
+  system keeps running.
+
+* Patch by Cedric Vincent, 6 Jul 2005:
+  Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c"
+
+* Patch by Jon Loeliger, 20 Jul 2005:
+  Add missing PCI IO port definitions.
+
+* Add CompactFlash support for HMI1001 board.
+
+* Adjust printed board ID for LWMON board.
+
+* Fix low-level OHCI transfers for ARM920t and MPC5xxx
+
+* Add new argument format for flash commands to allow for usage like
+  "erase $(addr) +$(filesize)", i. e. a size argument can be used and
+  U-Boot will automaticially find the end of the corresponding sector.
+
 * Patch by Stefan Roese, 5 Jul 2005:
   Update uc100 board PHY setup
 

CREDITS

@@ -198,10 +198,9 @@ D: Support for Samsung ARM920T S3C2400X, ARM920T "TRAB"
 W: www.denx.de
 
 N: Murray Jensen
-E: Murray.Jensen@cmst.csiro.au
+E: Murray.Jensen@csiro.au
 D: Initial 8260 support; GDB support
 D: Port to Cogent+Hymod boards; Hymod Board Database
-W: http://www.msa.cmst.csiro.au/ourstaff/MurrayJensen/mjj.html
 
 N: Yoo. Jonghoon
 E: yooth@ipone.co.kr

MAINTAINERS

@@ -32,6 +32,7 @@ Reinhard Arlt <reinhard.arlt@esd-electronics.com>
 Yuli Barcohen <yuli@arabellasw.com>
 
 	Adder			MPC87x/MPC852T
+	ep8248			MPC8248
 	ISPAN			MPC8260
 	MPC8260ADS		MPC826x/MPC827x/MPC8280
 	Rattler			MPC8248
@@ -41,10 +42,6 @@ Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com>
 
 	sacsng			MPC8260
 
-Rick Bronson <rick@efn.org>
-
-	AT91RM9200DK		at91rm9200
-
 Oliver Brown <obrown@adventnetworks.com>
 
 	gw8260			MPC8260
@@ -129,107 +126,6 @@ Thomas Frieden <ThomasF@hyperion-entertainment.com>
 
 	AmigaOneG3SE		MPC7xx
 
-Frank Gottschling <fgottschling@eltec.de>
-
-	MHPC			MPC8xx
-
-	BAB7xx			MPC740/MPC750
-
-Wolfgang Grandegger <wg@denx.de>
-
-	CCM			MPC855
-
-	PN62			MPC8240
-
-	IPHASE4539		MPC8260
-	SCM			MPC8260
-
-Howard Gray <mvsensor@matrix-vision.de>
-
-	MVS1			MPC823
-
-Bill Hargen <Bill_Hargen@Jabil.com>
-
-	BUBINGA405EP		PPC405EP
-
-Klaus Heydeck <heydeck@kieback-peter.de>
-
-	KUP4K			MPC855
-	KUP4X			MPC859
-
-Murray Jensen <Murray.Jensen@cmst.csiro.au>
-
-	cogent_mpc8xx		MPC8xx
-
-	cogent_mpc8260		MPC8260
-	hymod			MPC8260
-
-Brad Kemp <Brad.Kemp@seranoa.com>
-
-	ppmc8260		MPC8260
-
-Sangmoon Kim <dogoil@etinsys.com>
-
-	debris			MPC8245
-
-Nye Liu <nyet@zumanetworks.com>
-
-	ZUMA			MPC7xx_74xx
-
-Thomas Lange <thomas@corelatus.se>
-
-	GTH			MPC860
-
-The LEOX team <team@leox.org>
-
-	ELPT860			MPC860T
-
-Eran Man <eran@nbase.co.il>
-
-	EVB64260_750CX		MPC750CX
-
-Andrea "llandre" Marson <andrea.marson@dave-tech.it>
-
-	PPChameleonEVB	PPC405EP
-
-Reinhard Meyer <r.meyer@emk-elektronik.de>
-
-	TOP860			MPC860T
-	TOP5200			MPC5200
-
-Scott McNutt <smcnutt@artesyncp.com>
-
-	EBONY			PPC440GP
-
-Tolunay Orkun <torkun@nextio.com>
-	csb272			PPC405GP
-	csb472			PPC405GP
-
-Keith Outwater <Keith_Outwater@mvis.com>
-
-	GEN860T			MPC860T
-	GEN860T_SC		MPC860T
-
-Frank Panno <fpanno@delphintech.com>
-
-	ep8260			MPC8260
-
-Peter Pearse <peter.pearse@arm.com>
-
-	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
-	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
-	Versatile/AB		ARM926EJ-S
-	Versatile/PB		ARM926EJ-S
-
-Denis Peter <d.peter@mpl.ch>
-
-	MIP405			PPC4xx
-	PIP405			PPC4xx
-
-Daniel Poirot <dan.poirot@windriver.com>
-	sbc8240			MPC8240
-	sbc405			PPC405GP
-
 Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 
 	ADCIOP			IOP480 (PPC401)
@@ -258,10 +154,130 @@ Matthias Fuchs <matthias.fuchs@esd-electronics.com>
 	VOM405			PPC405EP
 	WUH405			PPC405EP
 
+Frank Gottschling <fgottschling@eltec.de>
+
+	MHPC			MPC8xx
+
+	BAB7xx			MPC740/MPC750
+
+Wolfgang Grandegger <wg@denx.de>
+
+	CCM			MPC855
+
+	PN62			MPC8240
+
+	IPHASE4539		MPC8260
+	SCM			MPC8260
+
+Howard Gray <mvsensor@matrix-vision.de>
+
+	MVS1			MPC823
+
+Klaus Heydeck <heydeck@kieback-peter.de>
+
+	KUP4K			MPC855
+	KUP4X			MPC859
+
+Murray Jensen <Murray.Jensen@csiro.au>
+
+	cogent_mpc8xx		MPC8xx
+
+	cogent_mpc8260		MPC8260
+	hymod			MPC8260
+
+Brad Kemp <Brad.Kemp@seranoa.com>
+
+	ppmc8260		MPC8260
+
+Sangmoon Kim <dogoil@etinsys.com>
+
+	debris			MPC8245
+
+Thomas Lange <thomas@corelatus.se>
+
+	GTH			MPC860
+
+The LEOX team <team@leox.org>
+
+	ELPT860			MPC860T
+
+Nye Liu <nyet@zumanetworks.com>
+
+	ZUMA			MPC7xx_74xx
+
+Jon Loeliger <jdl@freescale.com>
+
+	MPC8540ADS		MPC8540
+	MPC8560ADS		MPC8560
+	MPC8541CDS		MPC8541
+	MPC8555CDS		MPC8555
+
+Dan Malek <dan@embeddededge.com>
+
+	STxGP3			MPC85xx
+
+Eran Man <eran@nbase.co.il>
+
+	EVB64260_750CX		MPC750CX
+
+Andrea "llandre" Marson <andrea.marson@dave-tech.it>
+
+	PPChameleonEVB	PPC405EP
+
+Reinhard Meyer <r.meyer@emk-elektronik.de>
+
+	TOP860			MPC860T
+	TOP5200			MPC5200
+
+Tolunay Orkun <torkun@nextio.com>
+
+	csb272			PPC405GP
+	csb472			PPC405GP
+
+Keith Outwater <Keith_Outwater@mvis.com>
+
+	GEN860T			MPC860T
+	GEN860T_SC		MPC860T
+
+Frank Panno <fpanno@delphintech.com>
+
+	ep8260			MPC8260
+
+Peter Pearse <peter.pearse@arm.com>
+
+	Integrator/AP		CM 926EJ-S, CM7x0T, CM9x0T
+	Integrator/CP		CM 926EJ-S  CM920T, CM940T, CM922T-XA10
+	Versatile/AB		ARM926EJ-S
+	Versatile/PB		ARM926EJ-S
+
+Denis Peter <d.peter@mpl.ch>
+
+	MIP405			PPC4xx
+	PIP405			PPC4xx
+
+Daniel Poirot <dan.poirot@windriver.com>
+
+	sbc8240			MPC8240
+	sbc405			PPC405GP
+
+Stefan Roese <sr@denx.de>
+
+	bamboo			PPC440EP
+	bunbinga		PPC405EP
+	ebony			PPC440GP
+	ocotea			PPC440GX
+	sycamore		PPC405GPr
+	walnut			PPC405GP
+	yellowstone		PPC440GR
+	yosemite		PPC440EP
+
+Yusdi Santoso <yusdi_santoso@adaptec.com>
+
+	HIDDEN_DRAGON	MPC8241/MPC8245
+
 Travis Sawyer (travis.sawyer@sandburst.com>
 
 	XPEDITE1K		PPC440GX
-	OCOTEA			PPC440GX
 
 Peter De Schrijver <p2@mind.be>
 
@@ -294,21 +310,6 @@ John Zhan <zhanz@sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
-Jon Loeliger <jdl@freescale.com>
-
-	MPC8540ADS		MPC8540
-	MPC8560ADS		MPC8560
-	MPC8541CDS		MPC8541
-	MPC8555CDS		MPC8555
-
-Dan Malek <dan@embeddededge.com>
-
-	STxGP3			MPC85xx
-
-Yusdi Santoso <yusdi_santoso@adaptec.com>
-
-	HIDDEN_DRAGON	MPC8241/MPC8245
-
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
@@ -327,7 +328,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
@@ -344,6 +344,14 @@ Unknown / orphaned boards:
 #	Board			CPU					#
 #########################################################################
 
+Rishi Bhattacharya <rishi@ti.com>
+
+	omap5912osk		ARM926EJS
+
+Rick Bronson <rick@efn.org>
+
+	AT91RM9200DK		at91rm9200
+
 George G. Davis <gdavis@mvista.com>
 
 	assabet			SA1100
@@ -362,6 +370,11 @@ Marius Gr
 	impa7			ARM720T (EP7211)
 	ep7312			ARM720T (EP7312)
 
+Kshitij Gupta <kshitij@ti.com>
+
+	omap1510inn		ARM925T
+	omap1610inn		ARM926EJS
+
 Kyle Harris <kharris@nexus-tech.net>
 
 	lubbock			xscale
@@ -373,29 +386,13 @@ Gary Jennejohn <gj@denx.de>
 	smdk2400		ARM920T
 	trab			ARM920T
 
-Prakash Kumar <prakash@embedx.com>
-
-	cerf250			xscale
-
-Kshitij Gupta <kshitij@ti.com>
-
-	omap1510inn		ARM925T
-	omap1610inn		ARM926EJS
-
-Dave Peverley <dpeverley@mpc-data.co.uk>
-	omap730p2		ARM926EJS
-
 Nishant Kamat <nskamat@ti.com>
 
 	omap1610h2		ARM926EJS
 
-Rishi Bhattacharya <rishi@ti.com>
+Prakash Kumar <prakash@embedx.com>
 
-	omap5912osk		ARM926EJS
+	cerf250			xscale
-
-Richard Woodruff <r-woodruff2@ti.com>
-
-	omap2420h4		ARM1136EJS
 
 David M<>ller <d.mueller@elsoft.ch>
 
@@ -406,6 +403,10 @@ Rolf Offermanns <rof@sysgo.de>
 
 	shannon			SA1100
 
+Dave Peverley <dpeverley@mpc-data.co.uk>
+
+	omap730p2		ARM926EJS
+
 Robert Schwebel <r.schwebel@pengutronix.de>
 
 	csb226			xscale
@@ -413,7 +414,7 @@ Robert Schwebel <r.schwebel@pengutronix.de>
 
 Andrea Scian <andrea.scian@dave-tech.it>
 
-	B2				ARM7TDMI (S3C44B0X)
+	B2			ARM7TDMI (S3C44B0X)
 
 Greg Ungerer <greg.ungerer@opengear.com>
 
@@ -421,6 +422,10 @@ Greg Ungerer <greg.ungerer@opengear.com>
 	cm4116			ks8695p
 	cm4148			ks8695p
 
+Richard Woodruff <r-woodruff2@ti.com>
+
+	omap2420h4		ARM1136EJS
+
 Alex Z<>pke <azu@sysgo.de>
 
 	lart			SA1100

MAKEALL

@@ -60,16 +60,17 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	ADCIOP		AR405		ASH405		bubinga	        \
 	CANBT		CPCI405		CPCI4052	CPCI405AB	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
+	ebony		ERIC		EXBITGEN	HUB405		\
 	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
+	ml300		ocotea		OCRTC		ORSG		\
 	PCI405		PIP405		PLU405		PMC405		\
 	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	WUH405          XPEDITE1K			\
+	walnut	        WUH405          XPEDITE1K	yellowstone     \
+	yosemite                                                        \
 "
 
 #########################################################################
@@ -98,22 +99,31 @@ LIST_824x="	\
 
 LIST_8260="	\
 	atc		cogent_mpc8260	CPU86		CPU87		\
-	ep8260		gw8260		hymod		IPHASE4539	\
+	ep8248		ep8260		gw8260		hymod		\
-	ISPAN		MPC8260ADS	MPC8266ADS	MPC8272ADS	\
+	IPHASE4539	ISPAN		MPC8260ADS	MPC8266ADS	\
-	PM826		PM828		ppmc8260	Rattler8248	\
+	MPC8272ADS	PM826		PM828		ppmc8260	\
-	RPXsuper	rsdproto	sacsng		sbc8260		\
+	Rattler8248	RPXsuper	rsdproto	sacsng		\
-	SCM		TQM8260_AC	TQM8260_AD	TQM8260_AE	\
+	sbc8260		SCM		TQM8260_AC	TQM8260_AD	\
-	ZPC1900								\
+	TQM8260_AE	ZPC1900						\
 "
 
+#########################################################################
+## MPC83xx Systems (includes 8349, etc.)
+#########################################################################
+
+LIST_83xx="	\
+	MPC8349ADS	\
+"
+
+
 #########################################################################
 ## MPC85xx Systems (includes 8540, 8560 etc.)
 #########################################################################
 
 LIST_85xx="	\
-	MPC8540ADS	MPC8541CDS	MPC8555CDS	MPC8560ADS	\
+	MPC8540ADS	MPC8540EVAL	MPC8541CDS	MPC8548CDS	\
-	PM854		sbc8540		sbc8560		stxgp3		\
+	MPC8555CDS	MPC8560ADS	PM854		PM856		\
-	TQM8540								\
+	sbc8540		sbc8560		stxgp3		TQM8540		\
 "
 
 #########################################################################
@@ -132,6 +142,7 @@ LIST_7xx="	\
 LIST_ppc="${LIST_5xx}  ${LIST_5xxx}		\
 	  ${LIST_8xx}				\
 	  ${LIST_8220} ${LIST_824x} ${LIST_8260} \
+	  ${LIST_83xx}				\
 	  ${LIST_85xx}				\
 	  ${LIST_4xx}				\
 	  ${LIST_74xx} ${LIST_7xx}"
@@ -185,7 +196,7 @@ LIST_arm="	\
 "
 
 #########################################################################
-## MIPS Systems
+## MIPS Systems		(default = big endian)
 #########################################################################
 
 LIST_mips4kc="incaip"
@@ -196,6 +207,18 @@ LIST_au1xx0="dbau1000 dbau1100 dbau1500 dbau1550 dbau1550_el"
 
 LIST_mips="${LIST_mips4kc} ${LIST_mips5kc} ${LIST_au1xx0}"
 
+#########################################################################
+## MIPS Systems		(little endian)
+#########################################################################
+
+LIST_mips4kc_el=""
+
+LIST_mips5kc_el=""
+
+LIST_au1xx0_el="dbau1550_el"
+
+LIST_mips_el="${LIST_mips4kc_el} ${LIST_mips5kc_el} ${LIST_au1xx0_el}"
+
 #########################################################################
 ## i386 Systems
 #########################################################################
@@ -249,10 +272,10 @@ build_target() {
 for arg in $@
 do
 	case "$arg" in
-	ppc|5xx|5xxx|8xx|8220|824x|8260|85xx|4xx|7xx|74xx| \
+	ppc|5xx|5xxx|8xx|8220|824x|8260|83xx|85xx|4xx|7xx|74xx| \
 	arm|SA|ARM7|ARM9|ARM11|pxa|ixp| \
 	microblaze| \
-	mips| \
+	mips|mips_el| \
 	nios|nios2| \
 	x86|I486)
 			for target in `eval echo '$LIST_'${arg}`

Makefile

@@ -29,10 +29,10 @@ HOSTARCH := $(shell uname -m | \
 	    -e s/powerpc/ppc/ \
 	    -e s/macppc/ppc/)
 
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
+HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-export	HOSTARCH
+export	HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -54,7 +54,7 @@ ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = ppc_8xx-
+CROSS_COMPILE = powerpc-linux-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -97,6 +97,9 @@ endif
 ifeq ($(CPU),ppc4xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
+ifeq ($(CPU),mpc83xx)
+OBJS += cpu/$(CPU)/resetvec.o
+endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
@@ -228,6 +231,9 @@ PATI_config:		unconfig
 ## MPC5xxx Systems
 #########################################################################
 
+aev_config: unconfig
+	@./mkconfig -a aev ppc mpc5xxx tqm5200
+
 hmi1001_config:         unconfig
 	@./mkconfig hmi1001 ppc mpc5xxx hmi1001
 
@@ -351,6 +357,11 @@ MiniFAP_config:	unconfig
 		}
 	@./mkconfig -a TQM5200 ppc mpc5xxx tqm5200
 
+spieval_config:	unconfig
+	echo "#define CONFIG_CS_AUTOCONF">>include/config.h
+	echo "... with automatic CS configuration"
+	@./mkconfig -a spieval ppc mpc5xxx tqm5200
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -707,8 +718,11 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:	unconfig
+bamboo_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
 
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -759,8 +773,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:	unconfig
+ebony_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
 
 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -794,8 +808,8 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 
-OCOTEA_config:	unconfig
+ocotea_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
 
 OCRTC_config		\
 ORSG_config:	unconfig
@@ -846,6 +860,10 @@ PPChameleonEVB_HI_33_config:	unconfig
 sbc405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx sbc405
 
+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -856,8 +874,8 @@ W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:	unconfig
+walnut_config: unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
 
 WUH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -865,18 +883,23 @@ WUH405_config:	unconfig
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
-Alaska8220_config:	unconfig
+
+Alaska8220_config	\
+Yukon8220_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 alaska
 
 sorcery_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8220 sorcery
 
-Yukon8220_config:	unconfig
-	@./mkconfig $(@:_config=) ppc mpc8220 yukon
-
 #########################################################################
 ## MPC824x Systems
 #########################################################################
@@ -982,6 +1005,10 @@ CPU87_ROMBOOT_config: unconfig
 	fi; \
 	echo "export CONFIG_BOOT_ROM" >> config.mk;
 
+ep8248_config	\
+ep8248E_config	:	unconfig
+	@./mkconfig ep8248 ppc mpc8260 ep8248
+
 ep8260_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 ep8260
 
@@ -1180,6 +1207,13 @@ M5282EVB_config :		unconfig
 TASREG_config :		unconfig
 	@./mkconfig $(@:_config=) m68k mcf52x2 tasreg esd
 
+#########################################################################
+## MPC83xx Systems
+#########################################################################
+
+MPC8349ADS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349ads
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
@@ -1187,18 +1221,44 @@ TASREG_config :		unconfig
 MPC8540ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
 
+MPC8540EVAL_config \
+MPC8540EVAL_33_config \
+MPC8540EVAL_66_config \
+MPC8540EVAL_33_slave_config \
+MPC8540EVAL_66_slave_config:      unconfig
+	@echo "" >include/config.h ; \
+	if [ "$(findstring _33_,$@)" ] ; then \
+		echo -n "... 33 MHz PCI" ; \
+	else \
+		echo "#define CONFIG_SYSCLK_66M" >>include/config.h ; \
+		echo -n "... 66 MHz PCI" ; \
+	fi ; \
+	if [ "$(findstring _slave_,$@)" ] ; then \
+		echo "#define CONFIG_PCI_SLAVE" >>include/config.h ; \
+		echo " slave" ; \
+	else \
+		echo " host" ; \
+	fi
+	@./mkconfig -a MPC8540EVAL ppc mpc85xx mpc8540eval
+
 MPC8560ADS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
 
 MPC8541CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8541cds cds
 
+MPC8548CDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx mpc8548cds cds
+
 MPC8555CDS_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx mpc8555cds cds
 
 PM854_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc85xx pm854
 
+PM856_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc85xx pm856
+
 sbc8540_config \
 sbc8540_33_config \
 sbc8540_66_config:	unconfig
@@ -1563,7 +1623,7 @@ dbau1550_config		:	unconfig
 dbau1550_el_config	:	unconfig
 	@ >include/config.h
 	@echo "#define CONFIG_DBAU1550 1" >>include/config.h
-	@./mkconfig -a dbau1x00 mips mips dbau1x00 "" little
+	@./mkconfig -a dbau1x00 mips mips dbau1x00
 
 #########################################################################
 ## MIPS64 5Kc
@@ -1677,7 +1737,7 @@ clean:
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
 	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
-	rm -f board/trab/trab_fkt
+	rm -f board/trab/trab_fkt board/voiceblue/eeprom
 
 clobber:	clean
 	find . -type f \( -name .depend \

README

@@ -287,17 +287,17 @@ The following options need to be configured:
 		CONFIG_EBONY		CONFIG_MOUSSE		CONFIG_SXNI855T
 		CONFIG_ELPPC		CONFIG_MPC8260ADS	CONFIG_TQM823L
 		CONFIG_ELPT860		CONFIG_MPC8540ADS	CONFIG_TQM8260
-		CONFIG_ep8260		CONFIG_MPC8560ADS	CONFIG_TQM850L
+		CONFIG_ep8260		CONFIG_MPC8540EVAL	CONFIG_TQM850L
-		CONFIG_ERIC		CONFIG_MUSENKI		CONFIG_TQM855L
+		CONFIG_ERIC		CONFIG_MPC8560ADS	CONFIG_TQM855L
-		CONFIG_ESTEEM192E	CONFIG_MVS1		CONFIG_TQM860L
+		CONFIG_ESTEEM192E	CONFIG_MUSENKI		CONFIG_TQM860L
-		CONFIG_ETX094		CONFIG_NETPHONE		CONFIG_TTTech
+		CONFIG_ETX094		CONFIG_MVS1		CONFIG_TTTech
-		CONFIG_EVB64260		CONFIG_NETTA		CONFIG_UTX8245
+		CONFIG_EVB64260		CONFIG_NETPHONE		CONFIG_UTX8245
-		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
+		CONFIG_FADS823		CONFIG_NETTA		CONFIG_V37
-		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
+		CONFIG_FADS850SAR	CONFIG_NETVIA		CONFIG_W7OLMC
-		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
+		CONFIG_FADS860T		CONFIG_NX823		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
+		CONFIG_FLAGADM		CONFIG_OCRTC		CONFIG_WALNUT
-		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
+		CONFIG_FPS850L		CONFIG_ORSG		CONFIG_ZPC1900
-		CONFIG_FPS860L					CONFIG_ZUMA
+		CONFIG_FPS860L		CONFIG_OXC		CONFIG_ZUMA
 
 		ARM based boards:
 		-----------------
@@ -2186,14 +2186,14 @@ configurations; the following names are supported:
 	DUET_ADS_config		MBX_config		sbc8560_66_config
 	EBONY_config		MPC8260ADS_config	SM850_config
 	ELPT860_config		MPC8540ADS_config	SPD823TS_config
-	ESTEEM192E_config	MPC8560ADS_config	stxgp3_config
+	ESTEEM192E_config	MPC8540EVAL_config	stxgp3_config
-	ETX094_config		NETVIA_config		SXNI855T_config
+	ETX094_config		MPC8560ADS_config	SXNI855T_config
-	FADS823_config		omap1510inn_config	TQM823L_config
+	FADS823_config		NETVIA_config		TQM823L_config
-	FADS850SAR_config	omap1610h2_config	TQM850L_config
+	FADS850SAR_config	omap1510inn_config	TQM850L_config
-	FADS860T_config		omap1610inn_config	TQM855L_config
+	FADS860T_config		omap1610h2_config	TQM855L_config
-	FPS850L_config		omap5912osk_config	TQM860L_config
+	FPS850L_config		omap1610inn_config	TQM860L_config
-				omap2420h4_config	WALNUT405_config
+				omap5912osk_config	walnut_config
-							Yukon8220_config
+				omap2420h4_config	Yukon8220_config
 							ZPC1900_config
 
 Note: for some board special configuration names may exist; check if
@@ -3135,7 +3135,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in