Commit Graph

7 Commits

Author SHA1 Message Date
Simon Glass
336d4615f8 dm: core: Create a new header file for 'compat' features
At present dm/device.h includes the linux-compatible features. This
requires including linux/compat.h which in turn includes a lot of headers.
One of these is malloc.h which we thus end up including in every file in
U-Boot. Apart from the inefficiency of this, it is problematic for sandbox
which needs to use the system malloc() in some files.

Move the compatibility features into a separate header file.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-02-05 19:33:46 -07:00
Martin Fuzzey
a2e99a71b2 w1: Add driver for i.MX bus master controller
Two variants of controllers are supported:
V1 (bitwise only) found in
	i.MX21, i.MX27, i.MX31, i.MX51
V2 (byte operations) found in
	i.MX25, i.MX35, i.MX50, i.MX53

Only tested on i.MX53 hardware but in both modes
(by modifying the device tree).

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
2019-01-01 14:12:18 +01:00
Martin Fuzzey
b95938117c w1: fix occasional enumeration failure
Sometimes enumeration fails (about 1 in 50 times on my custom board).

The underlying reason is probably electrical but Linux does not have
the problem.

Comparing the Linux / u-boot implementations shows that Linux
retries the error case whereas u-boot aborts early.

Removing the early abort in u-boot fixes the problem.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
2018-12-06 17:15:15 -05:00
Martin Fuzzey
65b60897a7 w1: fix data abort if no one wire bus master present
When the "w1 bus" command is used with no bus master present
a data abort may occur.

This is because uclass_first_device() returns zero, but sets the output
struct udevice pointer to NULL in the no device found case.

Fix w1_get_bus() to account for this and return an error code
as is expected by the callers.

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-11-01 10:02:10 -04:00
Eugen Hristev
543b98c857 w1: identify devices with w1-eeprom uclass
When a new device is discovered, this may be a w1 eeprom device.
Attempt to find the proper node and driver from the w1-eeprom subsystem.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:35 -04:00
Maxime Ripard
73aea285e3 w1: Add 1-Wire gpio driver
Add a bus driver for bitbanging a 1-Wire bus over a GPIO.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[eugen.hristev@microchip.com: fixed some issues]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:34 -04:00
Maxime Ripard
d3e19cf919 w1: Add 1-Wire uclass
We might want to use 1-Wire devices connected on boards such as EEPROMs in
U-Boot.

Provide a framework to be able to do that.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[eugen.hristev@microchip.com: reworked]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-09-28 20:22:34 -04:00