Commit Graph

114 Commits

Author SHA1 Message Date
Heinrich Schuchardt
e9cc7029e8 doc: build infodocs target on Gitlab CI, Azure
Add infodocs target to CI testing.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2023-01-13 09:09:07 +01:00
Tom Rini
85fd48984e CI/Docker: Update to jammy-20221130 tag
Update to the latest "jammy" tag. This requires us to list libc6-i386 as
a required package to install (for nokia_rx51 tests) that was previously
implicit.

Signed-off-by: Tom Rini <trini@konsulko.com>
2023-01-11 15:02:24 -05:00
Tom Rini
bb9b9c1e20 CI: Replace unmigrated symbol test with non-Kconfig introduction test
Now that all symbols have been migrated to Kconfig, or are part of the
CFG namespace we do not need a complex check for unmigrated CONFIG
symbols. Any instance of #define (or #undef) or a CONFIG value is wrong,
so cause CI to fail.

This test is not as strict as possible yet as we have more symbols that
were not previously caught to deal with.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-12-23 13:01:12 -05:00
Tom Rini
09ed7e62f3 CI: Update to gcc-12.2
- Update to gcc-12.2, and cherry-pick a fix in grub for risc-v

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-06 15:30:30 -05:00
Tom Rini
bd181a24c4 CI: Make more use of git safe.directory
We have a number of jobs that will have git complain about needing to
set safe.directory and this being untrue as a fatal error, but then
complete. Set this flag correctly now as it should be used, and may
prevent a future failure.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-11-24 16:26:03 -05:00
Tom Rini
d7713ad36f buildman: Add --allow-missing flag to allow missing blobs
Add a new flag to buildman so that we will in turn pass
BINMAN_ALLOW_MISSING=1 to 'make'. Make use of this flag in CI.

Allow the settings file to control this.

Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2022-11-22 15:13:35 -07:00
Tom Rini
17196e446b CI: Update to jammy-20221003-17Oct2022 tag
This includes python3-pyelftools so we can drop it from one of the tests
directly.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-10-17 11:10:32 -04:00
Heinrich Schuchardt
e2ce13c4a7 docker: install riscv32 toolchain
For building riscv32 targets we should use the riscv32 toolchain.
Add it to the Docker image.

Drop the riscv toolchain-alias as we do not need it in future.

While in here, update to the latest "jammy" tag.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
[trini: Update to latest jammy tag]
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-10-07 08:42:21 -04:00
Tom Rini
e9a1ff9724 Merge branch 'master' into next
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-09-19 16:07:12 -04:00
Simon Glass
1aa168ca8f ci: Add a test for a non-LTO build
Check that sandbox builds and runs tests OK with LTO disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-09-02 16:20:11 -04:00
Joel Stanley
cb735173e7 gitlab-ci: Update comment about the Dockerfile
It's found in the u-boot tree now.

Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-08-31 12:16:01 -04:00
Tom Rini
b6d4e0850b CI: Move to Ubuntu 2022.04 "Jammy" for CI base
- We now have a new enough sbsigntools in the distro, stop building.
- Use the 20220801 tag for Jammy.
- Move to pygit2 1.9.2 (current version) as the old one doesn't build on
 "Jammy".
- Add the working directory to the list of safe directories for git.
- Move to pytest 6.2.5 to address other issues.
- This move exposed a number of minor issues in the existing scripts we
  used within CI to perform the jobs themselves.  The most notable changes
  here involve using 'set +e / set -e' to enforce when we should or should
  not make non-zero buildman status be a fatal error.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-08-22 08:01:34 -04:00
Simon Glass
7ae8a5270a gitlab/azure: Use buildman instead of genboardscfg
Use the equivalent buildman functionality to check maintainer info.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-08-05 11:47:56 -04:00
Joel Stanley
b24087ae64 CI: Add Aspeed AST2600
The AST2600 has a Qemu model that allows testing. Create a SPI NOR image
containing the combined SPL and u-boot FIT image.

Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:32:00 -04:00
Simon Glass
a31eff3015 CI: Run VPL tests
Add tests for VPL into the mix. For now this just runs the help test and
a few SPL ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-05-02 10:01:52 -04:00
Tom Rini
239fe55a6c CI: Print out unmigrated symbols when failing
To make addressing the problem of migrated symbols being present in
board config header files, update the CI test to them print what symbols
are causing it to fail.  Also report all failures in the tree, rather
than stopping at the first failing file.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-15 08:09:16 -04:00
Tom Rini
694943cf2a CI: Update unmigrated symbol check
We need to check for config header files that #undef migrated symbols as
well.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-04-01 10:28:45 -04:00
Tom Rini
e47bbf7e0e CI: Pin pylint version to 2.12.2
For consistency in runs, we need to always use the same pylint version.
Pin to 2.12.2 as this is what we have been using so far.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-25 08:26:01 -04:00
Tom Rini
576eac8557 CI: Fix unmigrated symbol test
When calling comm to compare the CONFIG symbols a defconfig uses with
the symbols that have been migrated, we need to suppress all output as
the summary line will have everything we need.  Failure to do this leads
to the test blowing up, but in non-fatal ways.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-18 08:43:24 -04:00
Tom Rini
17af72eb16 CI, Docker: Update to latest focal tag
Signed-off-by: Tom Rini <trini@konsulko.com>
2022-03-15 16:18:16 -04:00
Simon Glass
642e51addf Azure/GitLab CI: Add the pylint checker
Add a check that new Python code does not regress the pylint score for
any module.

Signed-off-by: Simon Glass <sjg@chromium.org>
2022-03-02 10:28:12 -05:00
Tom Rini
cd59d44cfd Dockfile, CI: Update to latest focal tag and build
- Latest focal tag
- Add libgnutls to image

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-02-03 12:15:32 -05:00
Simon Glass
bfb2a7fbd1 gitlab/azure: x86: Add a coreboot test
Coreboot supports U-Boot as a payload and this recently got a bit of a
facelist. Add a test for this.

For now this uses a binary build of coreboot (v4.15). Future work could
potentially build it from source, but we need to figure out the
toolchain problems first, since coreboot uses its own toolchain. It
turns out that this is tricky, because coreboot fails to build with a
vanilla gcc.

This needs some changes to the hooks scripts as well. An example build
is at https://source.denx.de/u-boot/custodians/u-boot-dm/-/jobs/359687

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2022-01-28 17:58:41 -05:00
Tom Rini
9d358a8c26 CI, Dockerfile: Update to latest "focal" tag
Bring us to the focal-20220105 tag and rebuild our images on top of
this.

Signed-off-by: Tom Rini <trini@konsulko.com>
2022-01-12 21:26:52 -05:00
Tom Rini
c1a7de5702 CI: Test for unmigrated CONFIG symbols in board config.h files
Now that all symbols that exist in Kconfig no longer also have boards
setting them  in the board config.h file, add a CI test to catch new
instances of this, and fail.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-12-27 16:20:18 -05:00
Tom Rini
99cffa233c Dockerfile, CI: Update to latest "focal" tag
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-11-14 10:30:48 -05:00
Tom Rini
e2d6a77a8f CI: Switch running the nokia_rx51 test with in-container toolchain
Instead of fetching an arm toolchain to use, run the test with the one
that's already in the container image.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2021-10-21 12:50:48 -06:00
Tom Rini
927e0eedfc CI: Update to LLVM-13
- Switch sources and CI scripts to install and use LLVM-13
- Update to latest "focal" tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-10-14 19:45:07 -04:00
Tom Rini
7fde64c004 Azure/GitLab CI: Update docker image
Rebuild our current docker image so that ca-certificates will be updated
and Let's Encrypt issued certificates will work again.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-30 11:36:10 -04:00
Kristian Amlie
15e30106ce ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.
vexpress_ca9x4 is seemingly the only board except for qemu_arm which
is able to run U-Boot correctly, using the `-M vexpress-a9` option to
QEMU. Building for qemu_arm and running qemu-system-arm with the `-M
virt` argument has a number of downsides, most importantly that it
only supports virtio storage drivers. This significantly reduces its
usefulness in testing memory card and Flash solutions, especially when
the tested images are from a third party source.

So therefore we reintroduce the vexpress_ca9x4 board in this commit,
with the explicit goal of using it with QEMU.

A number of differences to note from the original:

* Since the board was apparently unmaintained, I have now set myself
  as the maintainer.

* The board has been converted to use the driver model, which was the
  reason it was removed in the first place.

* The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed
  in the same commit, are not necessary for the QEMU use case, and
  have been omitted.

* An `mmc0` alias was introduced in the dts file. The mmc is not
  detected correctly without this, now that it's based on the device
  tree instead of the board's init function.

* A couple of other nodes were removed because they were problematic
  when trying to run the UEFI bootmgr. Once again, the primary use
  case here is QEMU, and these nodes are not needed for that to work.

* Unnecessary board init code has been removed, thanks to driver model
  and device tree.

* `CONFIG_OF_EMBED` has been enabled. I know this goes against
  recommended practice, but there doesn't seem to be any other way to
  pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument
  does not work, I suppose because U-Boot doesn't use the same
  mechanics as the kernel when it's booting.

* Load addresses have been changed to fit QEMU use case.

People wanting to get a more detailed, yet somewhat isolated, diff
between this and the original, can run this command:

  git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \
      $( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD)

(Make sure to either check out this commit first, or replace HEAD with
the commit ID of this commit)

Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2021-09-24 14:30:46 -04:00
Tom Rini
201853834a CI: Update to latest container images
- Current Ubuntu/Focal tag
- QEMU 6.1.0
- genimage tool added

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-11 12:15:15 -04:00
Bin Meng
0e60b3a718 azure/gitlab: Add tests for SiFive Unleashed board
This adds CI tests for SiFive Unleashed board.

QEMU supports booting exact the same images as used on the real
hardware out of the box, that U-Boot SPL loads U-Boot proper
from either an SD card or the SPI NOR flash, hence we can easily
set up CI to cover these 2 boot flows of SiFive Unleashed board.

With this, now we can have regression testing of mmc-spi-slot and
sifive spi drivers, as well as mmc and spi-nor subsystems.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-11 10:40:31 -04:00
Tom Rini
66217225f7 CI: Update to LLVM-12
The current stable release of LLVM is 12, update to that.  While at it,
fix that we had not correctly upgraded to LLVM 11 previously.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-08-04 11:30:46 -04:00
Tom Rini
7bb1cc3bb9 Azure/GitLab: Move to gcc-11.1.0 and LLVM-11
- Move to gcc-11.1.0 builds from kernel.org for supported platforms and
  LLVM-11 for those tests.
- As Heinrich has noted, the RISC-V platform specification has a profile
  OS-A for running rich operating systems like Linux and BSD. This profile
  requires 64bit and UEFI conforming to the EBBR. Only the 'embedded'
  profile may use 32bit.  Given this, drop grub for 32bit RISC-V as it no
  longer compiles with gcc-11.1 and upstream is unlikely to fix it:
  https://www.mail-archive.com/grub-devel@gnu.org/msg30736.html
- Update to grub-2.06 release to address other issues of building with
  gcc-11.1.
- Update to newer Xtensa (gcc-9.2.0) and ARC (gcc-10.2) toolchains

Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Rick Chen <rick@andestech.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-07 10:17:54 -04:00
Tom Rini
b1c2102db1 Docker/CI: Update to "focal" and latest build
Move us up to being based on Ubuntu 20.04 "focal" and the latest tag
from Ubuntu for this release.  For this, we make sure that "python" is
now python3 but still include python2.7 for the rx51 qemu build as that
is very old and does not support python3.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-05 15:28:32 -04:00
Harm Berntsen
b725ed5071 GitLab: Remove tags for sandbox_noinst tests
Commit 712cc962b7 ("GitLab: Remove "tags" stanzas") removed the 'all'
tag from all the jobs. The sandbox_noinst_test.py test was added in
between the author date and commit date (commit 6c914e4232
("azure/gitlab: Add tests for sandbox_noinst")) which is probably why it
still contains the tags. This commit fixes that so all jobs now don't
require tags on the GitLab runners.

Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com>
CC: Simon Glass <sjg@chromium.org>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-05-26 17:26:07 -04:00
Daniel Schwierzeck
5308a71db8 MIPS: remove deprecated qemu_mips board
Remove qemu_mips boards because DM migration doesn't make sense.
The board support for qemu_mips is already marked as deprecated
in Qemu in favour of the Malta board. Also qemu_mips support
has been removed from Linux a long time ago.

The official replacement is the Malta board. The same Malta U-Boot
image can be used with Qemu and on physical hardware.
All combinations of Big Endian and Little Endian as well as 32 bit
and 64 bit are supported.

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-05-25 15:35:06 +02:00
Tom Rini
38229b55d3 Azure/GitLab: Ensure we use requirements.txt for testsuites
Given that test/py/requirements.txt has all required test modules, make
use of that rather than a manual pip install list before running our
assorted tool testsuites.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-29 03:23:39 -07:00
Tom Rini
c6c26a05b8 arm: Remove vexpress_ca15_tc2 board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-10 08:00:12 -04:00
Heinrich Schuchardt
b6b35fd2a1 Azure/GitLab: bump OpenSBI version to 0.9
Version 0.9 of OpenSBI provides the system reset extension which allows us
to reset and power off boards without board specific code.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-07 14:47:05 -04:00
Tom Rini
712cc962b7 GitLab: Remove "tags" stanzas
Given the structure of our current GitLab tests, we don't make real use
of the tags.  Furthermore, these tags prevent the automatic usage of the
default GitLab runners.  Remove these tags.

Reported-by: Roger Meier <r.meier@siemens.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07 11:13:54 -04:00
Simon Glass
6c914e4232 azure/gitlab: Add tests for sandbox_noinst
Add this new board to the test plans. Travis-CI is left out, since it is
being removed soon due to lack of capacity.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-26 17:03:09 +13:00
Tom Rini
6a026e5649 Azure/GitLab: Use buildman -T0 for binman, etc, test
There are times where buildman seems to get stuck in this job when in
CI.  Forcing single-threaded here allows us to complete and move on.

Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-04 17:51:43 -05:00
Tom Rini
85ae52b959 uboot-test-hooks: Switch to our GitLab instance
As Stephen is no longer actively maintaining the uboot-test-hooks
repository, switch to using the instance on our GitLab.

Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-28 13:57:30 -05:00
Heinrich Schuchardt
a3bbd0b912 Correct U-Boot upstream repository
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git
effective 2021-02-28.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-02-28 13:57:30 -05:00
Heinrich Schuchardt
836049d63e .gitlab-ci: install doc/sphinx/requirements.txt
Install all requirements according to doc/sphinx/requirements.txt in the
virtual environment used for testing 'make htmldocs'.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-27 12:52:57 +01:00
Simon Glass
bd73bb447f azure/gitLab/travis: Add pygit2 as a dependency for tests
This lets patman run all of its tests, rather than skipping quite a few.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-11-05 09:11:31 -07:00
Simon Glass
afb26ba9a7 Azure/GitLab/Travis: Add SPL unit tests
Run SPL unit tests in all test environments.

Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29 14:42:18 -06:00
Marek Vasut
0e12575645 Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet options
Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet
options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-15 08:59:06 -04:00
Tom Rini
7149077353 Azure/GitLab: Update to latest Docker container
- New base snapshot
- Fix for high UID/GID numbers on a toolchain

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-02 09:22:29 -04:00