nds32: Support AG101P timer DM.
Support AG101P timer device tree flow. Signed-off-by: rick <rick@andestech.com>
This commit is contained in:
parent
86132af799
commit
f5076f8698
@ -8,7 +8,7 @@
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_TIMER
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <faraday/fttmr010.h>
|
||||
@ -189,3 +189,4 @@ ulong get_tbclk(void)
|
||||
return CONFIG_SYS_CLK_FREQ;
|
||||
#endif
|
||||
}
|
||||
#endif /* CONFIG_TIMER */
|
||||
|
@ -13,6 +13,7 @@
|
||||
/* bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0x99600000 debug bootmem_debug memblock=debug loglevel=7"; */
|
||||
bootargs = "console=ttyS0,38400n8 earlyprintk=uart8250-32bit,0x99600000 debug loglevel=7";
|
||||
stdout-path = "uart0:38400n8";
|
||||
tick-timer = &timer0;
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
@ -46,4 +47,11 @@
|
||||
no-loopback-test = <1>;
|
||||
};
|
||||
|
||||
timer0: timer@98400000 {
|
||||
compatible = "andestech,attmr010";
|
||||
reg = <0x98400000 0x1000>;
|
||||
interrupts = <19 4>;
|
||||
clock-frequency = <15000000>;
|
||||
};
|
||||
|
||||
};
|
||||
|
@ -18,3 +18,5 @@ CONFIG_OF_CONTROL=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_DM_SERIAL=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_TIMER=y
|
||||
CONFIG_AG101P_TIMER=y
|
||||
|
@ -74,4 +74,10 @@ config ARC_TIMER
|
||||
usually at least one of them exists. Either of them is supported
|
||||
in U-Boot.
|
||||
|
||||
config AG101P_TIMER
|
||||
bool "Ag101p timer support"
|
||||
depends on TIMER
|
||||
help
|
||||
Select this to enable a timer for Ag101p devices.
|
||||
|
||||
endmenu
|
||||
|
@ -12,3 +12,4 @@ obj-$(CONFIG_OMAP_TIMER) += omap-timer.o
|
||||
obj-$(CONFIG_AST_TIMER) += ast_timer.o
|
||||
obj-$(CONFIG_STI_TIMER) += sti-timer.o
|
||||
obj-$(CONFIG_ARC_TIMER) += arc_timer.o
|
||||
obj-$(CONFIG_AG101P_TIMER) += ag101p_timer.o
|
||||
|
122
drivers/timer/ag101p_timer.c
Normal file
122
drivers/timer/ag101p_timer.c
Normal file
@ -0,0 +1,122 @@
|
||||
/*
|
||||
* Andestech ATFTMR010 timer driver
|
||||
*
|
||||
* (C) Copyright 2016
|
||||
* Rick Chen, NDS32 Software Engineering, rick@andestech.com
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
#include <common.h>
|
||||
#include <dm.h>
|
||||
#include <errno.h>
|
||||
#include <timer.h>
|
||||
#include <linux/io.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
/*
|
||||
* Timer Control Register
|
||||
*/
|
||||
#define T3_UPDOWN (1 << 11)
|
||||
#define T2_UPDOWN (1 << 10)
|
||||
#define T1_UPDOWN (1 << 9)
|
||||
#define T3_OFENABLE (1 << 8)
|
||||
#define T3_CLOCK (1 << 7)
|
||||
#define T3_ENABLE (1 << 6)
|
||||
#define T2_OFENABLE (1 << 5)
|
||||
#define T2_CLOCK (1 << 4)
|
||||
#define T2_ENABLE (1 << 3)
|
||||
#define T1_OFENABLE (1 << 2)
|
||||
#define T1_CLOCK (1 << 1)
|
||||
#define T1_ENABLE (1 << 0)
|
||||
|
||||
/*
|
||||
* Timer Interrupt State & Mask Registers
|
||||
*/
|
||||
#define T3_OVERFLOW (1 << 8)
|
||||
#define T3_MATCH2 (1 << 7)
|
||||
#define T3_MATCH1 (1 << 6)
|
||||
#define T2_OVERFLOW (1 << 5)
|
||||
#define T2_MATCH2 (1 << 4)
|
||||
#define T2_MATCH1 (1 << 3)
|
||||
#define T1_OVERFLOW (1 << 2)
|
||||
#define T1_MATCH2 (1 << 1)
|
||||
#define T1_MATCH1 (1 << 0)
|
||||
|
||||
struct atftmr_timer_regs {
|
||||
u32 t1_counter; /* 0x00 */
|
||||
u32 t1_load; /* 0x04 */
|
||||
u32 t1_match1; /* 0x08 */
|
||||
u32 t1_match2; /* 0x0c */
|
||||
u32 t2_counter; /* 0x10 */
|
||||
u32 t2_load; /* 0x14 */
|
||||
u32 t2_match1; /* 0x18 */
|
||||
u32 t2_match2; /* 0x1c */
|
||||
u32 t3_counter; /* 0x20 */
|
||||
u32 t3_load; /* 0x24 */
|
||||
u32 t3_match1; /* 0x28 */
|
||||
u32 t3_match2; /* 0x2c */
|
||||
u32 cr; /* 0x30 */
|
||||
u32 int_state; /* 0x34 */
|
||||
u32 int_mask; /* 0x38 */
|
||||
};
|
||||
|
||||
struct atftmr_timer_platdata {
|
||||
struct atftmr_timer_regs *regs;
|
||||
};
|
||||
|
||||
static int atftmr_timer_get_count(struct udevice *dev, u64 *count)
|
||||
{
|
||||
struct atftmr_timer_platdata *plat = dev->platdata;
|
||||
struct atftmr_timer_regs *const regs = plat->regs;
|
||||
u32 val;
|
||||
val = readl(®s->t3_counter);
|
||||
*count = timer_conv_64(val);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int atftmr_timer_probe(struct udevice *dev)
|
||||
{
|
||||
struct atftmr_timer_platdata *plat = dev->platdata;
|
||||
struct atftmr_timer_regs *const regs = plat->regs;
|
||||
u32 cr;
|
||||
writel(0, ®s->t3_load);
|
||||
writel(0, ®s->t3_counter);
|
||||
writel(TIMER_LOAD_VAL, ®s->t3_match1);
|
||||
writel(TIMER_LOAD_VAL, ®s->t3_match2);
|
||||
/* disable interrupts */
|
||||
writel(T3_MATCH1|T3_MATCH2|T3_OVERFLOW , ®s->int_mask);
|
||||
cr = readl(®s->cr);
|
||||
cr |= (T3_ENABLE|T3_UPDOWN);
|
||||
writel(cr, ®s->cr);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int atftme_timer_ofdata_to_platdata(struct udevice *dev)
|
||||
{
|
||||
struct atftmr_timer_platdata *plat = dev_get_platdata(dev);
|
||||
plat->regs = map_physmem(dev_get_addr(dev),
|
||||
sizeof(struct atftmr_timer_regs),
|
||||
MAP_NOCACHE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct timer_ops ag101p_timer_ops = {
|
||||
.get_count = atftmr_timer_get_count,
|
||||
};
|
||||
|
||||
static const struct udevice_id ag101p_timer_ids[] = {
|
||||
{ .compatible = "andestech,attmr010" },
|
||||
{}
|
||||
};
|
||||
|
||||
U_BOOT_DRIVER(altera_timer) = {
|
||||
.name = "ag101p_timer",
|
||||
.id = UCLASS_TIMER,
|
||||
.of_match = ag101p_timer_ids,
|
||||
.ofdata_to_platdata = atftme_timer_ofdata_to_platdata,
|
||||
.platdata_auto_alloc_size = sizeof(struct atftmr_timer_platdata),
|
||||
.probe = atftmr_timer_probe,
|
||||
.ops = &ag101p_timer_ops,
|
||||
.flags = DM_FLAG_PRE_RELOC,
|
||||
};
|
Loading…
Reference in New Issue
Block a user