armv8: ls1028aqds: Add support of LS1028AQDS
LS1028AQDS Development System is a high-performance computing, evaluation, and development platform that supports LS1028A QorIQ Architecture processor. Signed-off-by: Sudhanshu Gupta <sudhanshu.gupta@nxp.com> Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Tang yuantian <andy.tang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
This commit is contained in:
Yuantian Tang
Prabhakar Kushwaha
parent
353f36d96e
commit
f278a21749
@ -1262,6 +1262,17 @@ config TARGET_LS1012AFRDM
|
||||
development platform that supports the QorIQ LS1012A
|
||||
Layerscape Architecture processor.
|
||||
|
||||
config TARGET_LS1028AQDS
|
||||
bool "Support ls1028aqds"
|
||||
select ARCH_LS1028A
|
||||
select ARM64
|
||||
select ARMV8_MULTIENTRY
|
||||
help
|
||||
Support for Freescale LS1028AQDS platform
|
||||
The LS1028A Development System (QDS) is a high-performance
|
||||
development platform that supports the QorIQ LS1028A
|
||||
Layerscape Architecture processor.
|
||||
|
||||
config TARGET_LS1028ARDB
|
||||
bool "Support ls1028ardb"
|
||||
select ARCH_LS1028A
|
||||
|
||||
@ -104,7 +104,7 @@ config PSCI_RESET
|
||||
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
|
||||
!TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
|
||||
!TARGET_LS1012AFRWY && \
|
||||
!TARGET_LS1028ARDB && \
|
||||
!TARGET_LS1028ARDB && !TARGET_LS1028AQDS && \
|
||||
!TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
|
||||
!TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
|
||||
!TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
|
||||
|
||||
@ -330,6 +330,7 @@ dtb-$(CONFIG_FSL_LSCH3) += fsl-ls2080a-qds.dtb \
|
||||
fsl-ls1088a-rdb.dtb \
|
||||
fsl-ls1088a-qds.dtb \
|
||||
fsl-ls1028a-rdb.dtb \
|
||||
fsl-ls1028a-qds.dtb \
|
||||
fsl-lx2160a-rdb.dtb \
|
||||
fsl-lx2160a-qds.dtb
|
||||
dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \
|
||||
|
||||
88
arch/arm/dts/fsl-ls1028a-qds.dts
Normal file
88
arch/arm/dts/fsl-ls1028a-qds.dts
Normal file
@ -0,0 +1,88 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+ OR X11
|
||||
/*
|
||||
* NXP ls1028AQDS device tree source
|
||||
*
|
||||
* Copyright 2019 NXP
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "fsl-ls1028a.dtsi"
|
||||
|
||||
/ {
|
||||
model = "NXP Layerscape 1028a QDS Board";
|
||||
compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
|
||||
};
|
||||
|
||||
&dspi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dspi1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dspi2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&esdhc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&esdhc1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&serial1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -1,3 +1,42 @@
|
||||
if TARGET_LS1028AQDS
|
||||
|
||||
config SYS_BOARD
|
||||
default "ls1028a"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "freescale"
|
||||
|
||||
config SYS_SOC
|
||||
default "fsl-layerscape"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "ls1028aqds"
|
||||
|
||||
config EMMC_BOOT
|
||||
bool "Support for booting from EMMC"
|
||||
default n
|
||||
|
||||
config SYS_TEXT_BASE
|
||||
default 0x96000000 if SD_BOOT || EMMC_BOOT
|
||||
default 0x82000000 if TFABOOT
|
||||
default 0x20100000
|
||||
|
||||
if FSL_LS_PPA
|
||||
config SYS_LS_PPA_FW_ADDR
|
||||
hex "PPA Firmware Addr"
|
||||
default 0x20400000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A
|
||||
default 0x400000 if SYS_LS_PPA_FW_IN_MMC && ARCH_LS1028A
|
||||
if CHAIN_OF_TRUST
|
||||
config SYS_LS_PPA_ESBC_ADDR
|
||||
hex "PPA header Addr"
|
||||
default 0x20600000 if SYS_LS_PPA_FW_IN_XIP && ARCH_LS1028A
|
||||
endif
|
||||
endif
|
||||
|
||||
source "board/freescale/common/Kconfig"
|
||||
|
||||
endif
|
||||
|
||||
if TARGET_LS1028ARDB
|
||||
|
||||
config SYS_BOARD
|
||||
|
||||
@ -1,3 +1,14 @@
|
||||
LS1028AQDS BOARD
|
||||
M: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
|
||||
M: Rai Harninder <harninder.rai@nxp.com>
|
||||
M: Rajesh Bhagat <rajesh.bhagat@nxp.com>
|
||||
M: Tang Yuantian <andy.tang@nxp.com>
|
||||
S: Maintained
|
||||
F: board/freescale/ls1028a/
|
||||
F: include/configs/ls1028a_common.h
|
||||
F: include/configs/ls1028aqds.h
|
||||
F: configs/ls1028aqds_tfa_defconfig
|
||||
|
||||
LS1028ARDB BOARD
|
||||
M: Sudhanshu Gupta <sudhanshu.gupta@nxp.com>
|
||||
M: Rai Harninder <harninder.rai@nxp.com>
|
||||
|
||||
@ -77,3 +77,88 @@ Serial audio interface(SAI)
|
||||
- Audio codec SGTL5000 provides headphone and audio LINEOUT for
|
||||
stereo speakers
|
||||
- IEEE1588 interface to support audio on SAI4
|
||||
|
||||
QDS Default Switch Settings (1: ON; 0: OFF)
|
||||
-------------------------------------------
|
||||
For SD Boot
|
||||
SW1 : 1000_0000
|
||||
SW2 : 1110_0110
|
||||
SW3 : 0000_0010
|
||||
SW4 : 0000_0000
|
||||
SW5 : 0000_0000
|
||||
SW6 : 0000_0000
|
||||
SW7 : 1111_0011
|
||||
SW8 : 1110_0000
|
||||
SW9 : 1000_0001
|
||||
SW10: 1110_0000
|
||||
|
||||
For XSPI Boot
|
||||
SW1 : 1111_0000
|
||||
SW2 : 0000_0110
|
||||
SW3 : 0000_0010
|
||||
SW4 : 0000_0000
|
||||
SW5 : 0110_0000
|
||||
SW6 : 0101_0000
|
||||
SW7 : 1111_0011
|
||||
SW8 : 1110_0000
|
||||
SW9 : 1000_0000
|
||||
SW10: 1110_0000
|
||||
|
||||
LS1028AQDS board Overview
|
||||
-------------------------
|
||||
Processor
|
||||
Two Arm Cortex- A72 processor cores:
|
||||
- Based on 64-bit ARMv8 architecture
|
||||
- Up to 1.3 GHz operation
|
||||
- Single-threaded cores with 48 KB L1 instruction cache and 32 KB L1
|
||||
data cache
|
||||
- Arranged as a single cluster of two cores sharing a single 1 MB L2
|
||||
cache
|
||||
DDR memory
|
||||
- Supports data rates of up to 1.6 GT/s for both, DDR4 and DDR3L
|
||||
- Supports a single- or dual-ranked SODIMM or UDIMM connector
|
||||
- 32-bit data and 4-bit ECC
|
||||
- Supports x8/x16 devices
|
||||
- Supports ECC error detection and correction
|
||||
- 1.35 V or 1.2 V DDR power supply, with automatic tracking of VTT, to
|
||||
all devices in case of DDR3L or DDR4, respectively. Power can
|
||||
switch to 1.35 V or 1.2 V, based on the switch settings for DDR3L or
|
||||
DDR4 devices, respectively
|
||||
SerDes (Serializer/Deserializer)
|
||||
- Four-lane (0-3) SerDes:
|
||||
- Lane 0: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 10
|
||||
Gbit SXGMII, 1 Gbit SGMII
|
||||
- Lane 1: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
|
||||
SGMII, 10 Gbit QXGMII, 5 Gbit QSGMII, 1 Gbit SGMII
|
||||
- Lane 2: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
|
||||
SGMII
|
||||
- Lane 3: supports PCIe Gen1/2/3 with x1, x2, and x4 operation, 1 Gbit
|
||||
SGMII, SATA 2.0/3.0
|
||||
- Four slots on SerDes lanes support PCIe Gen1/2/3, 1 Gbit SGMII
|
||||
add-in cards
|
||||
- Lane 1 connects to a 2x10 connector with SFP+ through a retimer;
|
||||
lane 2 (TX lines) connects to an SMA connector
|
||||
Lane 3 connects to 1x7 header to support SATA devices
|
||||
eSDHC
|
||||
- eSDHC1, eSDHC2
|
||||
SPI
|
||||
- SPI1 and SPI2 support three onboard SPI flash memory devices:
|
||||
512 Mbit high-speed flash (with speed of up to 108/54 MHz)
|
||||
memory for storage
|
||||
4 Mbit low-speed flash memory (with speed of up to 40 MHz)
|
||||
64 Mbit high-speed flash memory (with speed of up to 104/80
|
||||
MHz)
|
||||
- SPI3 supports one onboard 64 Mbit SPI flash memory (with speed of
|
||||
up to 104/80 MHz)
|
||||
- All memories operate at 1.8 V
|
||||
- A header is provided on SPI1 to test SPI slave mode
|
||||
I2C
|
||||
- LS1028A supports eight I2C controllers
|
||||
Serial audio interface(SAI)
|
||||
Two SAI ports with audio codec SGTL5000:
|
||||
- Include stereo LINEIN with support for external analog input
|
||||
- Provide headphone and line output
|
||||
Display
|
||||
- DisplayPort connector to connect the DP data to a 4K display device
|
||||
(computer monitor)
|
||||
- eDP connector to connect the DP data to a 4K display panel
|
||||
|
||||
@ -27,6 +27,35 @@
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
int config_board_mux(void)
|
||||
{
|
||||
#if defined(CONFIG_TARGET_LS1028AQDS) && defined(CONFIG_FSL_QIXIS)
|
||||
u8 reg;
|
||||
|
||||
reg = QIXIS_READ(brdcfg[13]);
|
||||
/* Field| Function
|
||||
* 7-6 | Controls I2C3 routing (net CFG_MUX_I2C3):
|
||||
* I2C3 | 10= Routes {SCL, SDA} to CAN1 transceiver as {TX, RX}.
|
||||
* 5-4 | Controls I2C4 routing (net CFG_MUX_I2C4):
|
||||
* I2C4 |11= Routes {SCL, SDA} to CAN2 transceiver as {TX, RX}.
|
||||
*/
|
||||
reg &= ~(0xf0);
|
||||
reg |= 0xb0;
|
||||
QIXIS_WRITE(brdcfg[13], reg);
|
||||
|
||||
reg = QIXIS_READ(brdcfg[15]);
|
||||
/* Field| Function
|
||||
* 7 | Controls the CAN1 transceiver (net CFG_CAN1_STBY):
|
||||
* CAN1 | 0= CAN #1 transceiver enabled
|
||||
* 6 | Controls the CAN2 transceiver (net CFG_CAN2_STBY):
|
||||
* CAN2 | 0= CAN #2 transceiver enabled
|
||||
*/
|
||||
reg &= ~(0xc0);
|
||||
QIXIS_WRITE(brdcfg[15], reg);
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
#ifdef CONFIG_ENV_IS_NOWHERE
|
||||
@ -54,6 +83,15 @@ int board_eth_init(bd_t *bis)
|
||||
return pci_eth_init(bis);
|
||||
}
|
||||
|
||||
#if defined(CONFIG_ARCH_MISC_INIT)
|
||||
int arch_misc_init(void)
|
||||
{
|
||||
config_board_mux();
|
||||
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
#ifdef CONFIG_SYS_I2C_EARLY_INIT
|
||||
|
||||
61
configs/ls1028aqds_tfa_defconfig
Normal file
61
configs/ls1028aqds_tfa_defconfig
Normal file
@ -0,0 +1,61 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_TARGET_LS1028AQDS=y
|
||||
CONFIG_SYS_FSL_SDHC_CLK_DIV=1
|
||||
CONFIG_TFABOOT=y
|
||||
CONFIG_NR_DRAM_BANKS=2
|
||||
CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
|
||||
CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
|
||||
CONFIG_AHCI=y
|
||||
CONFIG_DISTRO_DEFAULTS=y
|
||||
# CONFIG_SYS_MALLOC_F is not set
|
||||
CONFIG_FIT_VERBOSE=y
|
||||
CONFIG_OF_BOARD_SETUP=y
|
||||
CONFIG_OF_STDOUT_VIA_ALIAS=y
|
||||
CONFIG_BOOTDELAY=10
|
||||
CONFIG_USE_BOOTARGS=y
|
||||
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 ramdisk_size=0x2000000 default_hugepagesz=2m hugepagesz=2m hugepages=256 video=1920x1080-32@60 cma=256M"
|
||||
CONFIG_CMD_GREPENV=y
|
||||
CONFIG_CMD_GPT=y
|
||||
CONFIG_CMD_I2C=y
|
||||
CONFIG_CMD_MMC=y
|
||||
CONFIG_CMD_PCI=y
|
||||
CONFIG_CMD_SF=y
|
||||
CONFIG_CMD_USB=y
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
CONFIG_CMD_CACHE=y
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1028a-qds"
|
||||
CONFIG_ENV_IS_IN_MMC=y
|
||||
CONFIG_ENV_IS_IN_SPI_FLASH=y
|
||||
CONFIG_NET_RANDOM_ETHADDR=y
|
||||
CONFIG_NETCONSOLE=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SCSI_AHCI=y
|
||||
CONFIG_SATA_CEVA=y
|
||||
CONFIG_FSL_CAAM=y
|
||||
CONFIG_DM_MMC=y
|
||||
CONFIG_DM_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_SPANSION=y
|
||||
CONFIG_SPI_FLASH_STMICRO=y
|
||||
# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHY_ATHEROS=y
|
||||
CONFIG_DM_ETH=y
|
||||
CONFIG_PHY_GIGE=y
|
||||
CONFIG_E1000=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_DM_PCI=y
|
||||
CONFIG_DM_PCI_COMPAT=y
|
||||
CONFIG_PCIE_LAYERSCAPE=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_DM_SCSI=y
|
||||
CONFIG_SYS_NS16550=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_DM_SPI=y
|
||||
CONFIG_FSL_DSPI=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_DM_USB=y
|
||||
CONFIG_USB_XHCI_HCD=y
|
||||
CONFIG_USB_XHCI_DWC3=y
|
||||
CONFIG_EFI_LOADER_BOUNCE_BUFFER=y
|
||||
161
include/configs/ls1028aqds.h
Normal file
161
include/configs/ls1028aqds.h
Normal file
@ -0,0 +1,161 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||
/*
|
||||
* Copyright 2019 NXP
|
||||
*/
|
||||
|
||||
#ifndef __LS1028A_QDS_H
|
||||
#define __LS1028A_QDS_H
|
||||
|
||||
#include "ls1028a_common.h"
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 100000000
|
||||
#define CONFIG_DDR_CLK_FREQ 100000000
|
||||
#define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4)
|
||||
|
||||
/* DDR */
|
||||
#define CONFIG_DIMM_SLOTS_PER_CTLR 2
|
||||
|
||||
#define CONFIG_QIXIS_I2C_ACCESS
|
||||
#define CONFIG_SYS_I2C_EARLY_INIT
|
||||
|
||||
/*
|
||||
* QIXIS Definitions
|
||||
*/
|
||||
#define CONFIG_FSL_QIXIS
|
||||
|
||||
#ifdef CONFIG_FSL_QIXIS
|
||||
#define QIXIS_BASE 0x7fb00000
|
||||
#define QIXIS_BASE_PHYS QIXIS_BASE
|
||||
#define CONFIG_SYS_I2C_FPGA_ADDR 0x66
|
||||
#define QIXIS_LBMAP_SWITCH 1
|
||||
#define QIXIS_LBMAP_MASK 0x0f
|
||||
#define QIXIS_LBMAP_SHIFT 5
|
||||
#define QIXIS_LBMAP_DFLTBANK 0x00
|
||||
#define QIXIS_LBMAP_ALTBANK 0x00
|
||||
#define QIXIS_LBMAP_SD 0x00
|
||||
#define QIXIS_LBMAP_EMMC 0x00
|
||||
#define QIXIS_LBMAP_QSPI 0x00
|
||||
#define QIXIS_RCW_SRC_SD 0x8
|
||||
#define QIXIS_RCW_SRC_EMMC 0x9
|
||||
#define QIXIS_RCW_SRC_QSPI 0xf
|
||||
#define QIXIS_RST_CTL_RESET 0x31
|
||||
#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20
|
||||
#define QIXIS_RCFG_CTL_RECONFIG_START 0x21
|
||||
#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08
|
||||
#define QIXIS_RST_FORCE_MEM 0x01
|
||||
|
||||
#define CONFIG_SYS_FPGA_CSPR_EXT (0x0)
|
||||
#define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
|
||||
CSPR_PORT_SIZE_8 | \
|
||||
CSPR_MSEL_GPCM | \
|
||||
CSPR_V)
|
||||
#define CONFIG_SYS_FPGA_AMASK IFC_AMASK(64 * 1024)
|
||||
#define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \
|
||||
CSOR_NOR_NOR_MODE_AVD_NOR | \
|
||||
CSOR_NOR_TRHZ_80)
|
||||
#endif
|
||||
|
||||
/* RTC */
|
||||
#define CONFIG_SYS_RTC_BUS_NUM 1
|
||||
#define I2C_MUX_CH_RTC 0xB
|
||||
|
||||
/* Store environment at top of flash */
|
||||
#define CONFIG_ENV_SIZE 0x2000
|
||||
|
||||
#ifdef CONFIG_SPL_BUILD
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
|
||||
#else
|
||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
||||
#endif
|
||||
|
||||
/* SATA */
|
||||
#define CONFIG_SCSI_AHCI_PLAT
|
||||
|
||||
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
|
||||
#ifndef CONFIG_CMD_EXT2
|
||||
#define CONFIG_CMD_EXT2
|
||||
#endif
|
||||
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
||||
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
||||
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
||||
CONFIG_SYS_SCSI_MAX_LUN)
|
||||
/* DSPI */
|
||||
#ifdef CONFIG_FSL_DSPI
|
||||
#define CONFIG_SPI_FLASH_SST
|
||||
#define CONFIG_SPI_FLASH_EON
|
||||
#endif
|
||||
|
||||
#ifndef SPL_NO_ENV
|
||||
#undef CONFIG_EXTRA_ENV_SETTINGS
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"board=ls1028aqds\0" \
|
||||
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
|
||||
"ramdisk_addr=0x800000\0" \
|
||||
"ramdisk_size=0x2000000\0" \
|
||||
"fdt_high=0xffffffffffffffff\0" \
|
||||
"initrd_high=0xffffffffffffffff\0" \
|
||||
"fdt_addr=0x00f00000\0" \
|
||||
"kernel_addr=0x01000000\0" \
|
||||
"scriptaddr=0x80000000\0" \
|
||||
"scripthdraddr=0x80080000\0" \
|
||||
"fdtheader_addr_r=0x80100000\0" \
|
||||
"kernelheader_addr_r=0x80200000\0" \
|
||||
"load_addr=0xa0000000\0" \
|
||||
"kernel_addr_r=0x81000000\0" \
|
||||
"fdt_addr_r=0x90000000\0" \
|
||||
"ramdisk_addr_r=0xa0000000\0" \
|
||||
"kernel_start=0x1000000\0" \
|
||||
"kernelheader_start=0x800000\0" \
|
||||
"kernel_load=0xa0000000\0" \
|
||||
"kernel_size=0x2800000\0" \
|
||||
"kernelheader_size=0x40000\0" \
|
||||
"kernel_addr_sd=0x8000\0" \
|
||||
"kernel_size_sd=0x14000\0" \
|
||||
"kernelhdr_addr_sd=0x4000\0" \
|
||||
"kernelhdr_size_sd=0x10\0" \
|
||||
"console=ttyS0,115200\0" \
|
||||
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
||||
BOOTENV \
|
||||
"boot_scripts=ls1028aqds_boot.scr\0" \
|
||||
"boot_script_hdr=hdr_ls1028aqds_bs.out\0" \
|
||||
"scan_dev_for_boot_part=" \
|
||||
"part list ${devtype} ${devnum} devplist; " \
|
||||
"env exists devplist || setenv devplist 1; " \
|
||||
"for distro_bootpart in ${devplist}; do " \
|
||||
"if fstype ${devtype} " \
|
||||
"${devnum}:${distro_bootpart} " \
|
||||
"bootfstype; then " \
|
||||
"run scan_dev_for_boot; " \
|
||||
"fi; " \
|
||||
"done\0" \
|
||||
"scan_dev_for_boot=" \
|
||||
"echo Scanning ${devtype} " \
|
||||
"${devnum}:${distro_bootpart}...; " \
|
||||
"for prefix in ${boot_prefixes}; do " \
|
||||
"run scan_dev_for_scripts; " \
|
||||
"done;" \
|
||||
"\0" \
|
||||
"boot_a_script=" \
|
||||
"load ${devtype} ${devnum}:${distro_bootpart} " \
|
||||
"${scriptaddr} ${prefix}${script}; " \
|
||||
"env exists secureboot && load ${devtype} " \
|
||||
"${devnum}:${distro_bootpart} " \
|
||||
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
|
||||
"&& esbc_validate ${scripthdraddr};" \
|
||||
"source ${scriptaddr}\0" \
|
||||
"sd_bootcmd=echo Trying load from SD ..;" \
|
||||
"mmcinfo; mmc read $load_addr " \
|
||||
"$kernel_addr_sd $kernel_size_sd && " \
|
||||
"env exists secureboot && mmc read $kernelheader_addr_r " \
|
||||
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
|
||||
" && esbc_validate ${kernelheader_addr_r};" \
|
||||
"bootm $load_addr#$board\0" \
|
||||
"emmc_bootcmd=echo Trying load from EMMC ..;" \
|
||||
"mmcinfo; mmc dev 1; mmc read $load_addr " \
|
||||
"$kernel_addr_sd $kernel_size_sd && " \
|
||||
"env exists secureboot && mmc read $kernelheader_addr_r " \
|
||||
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
|
||||
" && esbc_validate ${kernelheader_addr_r};" \
|
||||
"bootm $load_addr#$board\0"
|
||||
#endif
|
||||
#endif /* __LS1028A_QDS_H */
|
||||
Loading…
Reference in New Issue
Block a user