ARM: atmel: add sama5d4 xplained ultra board support
The code for this board supports following features: - Boot media support: NAND flash/SD card/SPI flash - Support LCD display (optional, disabled by default) - Support ethernet - Support USB mass storage Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
This commit is contained in:
Bo Shen
Tom Rini
parent
927b901b47
commit
f196044dfd
@ -509,6 +509,10 @@ config TARGET_SAMA5D3XEK
|
||||
select CPU_V7
|
||||
select SUPPORT_SPL
|
||||
|
||||
config TARGET_SAMA5D4_XPLAINED
|
||||
bool "Support sama5d4_xplained"
|
||||
select CPU_V7
|
||||
|
||||
config TARGET_SAMA5D4EK
|
||||
bool "Support sama5d4ek"
|
||||
select CPU_V7
|
||||
@ -848,6 +852,7 @@ source "board/atmel/at91sam9rlek/Kconfig"
|
||||
source "board/atmel/at91sam9x5ek/Kconfig"
|
||||
source "board/atmel/sama5d3_xplained/Kconfig"
|
||||
source "board/atmel/sama5d3xek/Kconfig"
|
||||
source "board/atmel/sama5d4_xplained/Kconfig"
|
||||
source "board/atmel/sama5d4ek/Kconfig"
|
||||
source "board/bachmann/ot1200/Kconfig"
|
||||
source "board/balloon3/Kconfig"
|
||||
|
||||
18
board/atmel/sama5d4_xplained/Kconfig
Normal file
18
board/atmel/sama5d4_xplained/Kconfig
Normal file
@ -0,0 +1,18 @@
|
||||
if TARGET_SAMA5D4_XPLAINED
|
||||
|
||||
config SYS_CPU
|
||||
default "armv7"
|
||||
|
||||
config SYS_BOARD
|
||||
default "sama5d4_xplained"
|
||||
|
||||
config SYS_VENDOR
|
||||
default "atmel"
|
||||
|
||||
config SYS_SOC
|
||||
default "at91"
|
||||
|
||||
config SYS_CONFIG_NAME
|
||||
default "sama5d4_xplained"
|
||||
|
||||
endif
|
||||
8
board/atmel/sama5d4_xplained/MAINTAINERS
Normal file
8
board/atmel/sama5d4_xplained/MAINTAINERS
Normal file
@ -0,0 +1,8 @@
|
||||
SAMA5D4 XPLAINED ULTRA BOARD
|
||||
M: Bo Shen <voice.shen@atmel.com>
|
||||
S: Maintained
|
||||
F: board/atmel/sama5d4_xplained/
|
||||
F: include/configs/sama5d4_xplained.h
|
||||
F: configs/sama5d4_xplained_mmc_defconfig
|
||||
F: configs/sama5d4_xplained_nandflash_defconfig
|
||||
F: configs/sama5d4_xplained_spiflash_defconfig
|
||||
8
board/atmel/sama5d4_xplained/Makefile
Normal file
8
board/atmel/sama5d4_xplained/Makefile
Normal file
@ -0,0 +1,8 @@
|
||||
#
|
||||
# Copyright (C) 2014 Atmel
|
||||
# Bo Shen <voice.shen@atmel.com>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
#
|
||||
|
||||
obj-y += sama5d4_xplained.o
|
||||
319
board/atmel/sama5d4_xplained/sama5d4_xplained.c
Normal file
319
board/atmel/sama5d4_xplained/sama5d4_xplained.c
Normal file
@ -0,0 +1,319 @@
|
||||
/*
|
||||
* Copyright (C) 2014 Atmel
|
||||
* Bo Shen <voice.shen@atmel.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/arch/at91_common.h>
|
||||
#include <asm/arch/at91_pmc.h>
|
||||
#include <asm/arch/at91_rstc.h>
|
||||
#include <asm/arch/gpio.h>
|
||||
#include <asm/arch/clk.h>
|
||||
#include <asm/arch/sama5d3_smc.h>
|
||||
#include <asm/arch/sama5d4.h>
|
||||
#include <atmel_lcdc.h>
|
||||
#include <atmel_mci.h>
|
||||
#include <lcd.h>
|
||||
#include <mmc.h>
|
||||
#include <net.h>
|
||||
#include <netdev.h>
|
||||
#include <nand.h>
|
||||
#include <spi.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#ifdef CONFIG_ATMEL_SPI
|
||||
int spi_cs_is_valid(unsigned int bus, unsigned int cs)
|
||||
{
|
||||
return bus == 0 && cs == 0;
|
||||
}
|
||||
|
||||
void spi_cs_activate(struct spi_slave *slave)
|
||||
{
|
||||
at91_set_pio_output(AT91_PIO_PORTC, 3, 0);
|
||||
}
|
||||
|
||||
void spi_cs_deactivate(struct spi_slave *slave)
|
||||
{
|
||||
at91_set_pio_output(AT91_PIO_PORTC, 3, 1);
|
||||
}
|
||||
|
||||
static void sama5d4_xplained_spi0_hw_init(void)
|
||||
{
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* SPI0_MISO */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* SPI0_MOSI */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* SPI0_SPCK */
|
||||
|
||||
at91_set_pio_output(AT91_PIO_PORTC, 3, 1); /* SPI0_CS0 */
|
||||
|
||||
/* Enable clock */
|
||||
at91_periph_clk_enable(ATMEL_ID_SPI0);
|
||||
}
|
||||
#endif /* CONFIG_ATMEL_SPI */
|
||||
|
||||
#ifdef CONFIG_NAND_ATMEL
|
||||
static void sama5d4_xplained_nand_hw_init(void)
|
||||
{
|
||||
struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
|
||||
|
||||
at91_periph_clk_enable(ATMEL_ID_SMC);
|
||||
|
||||
/* Configure SMC CS3 for NAND */
|
||||
writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
|
||||
AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
|
||||
&smc->cs[3].setup);
|
||||
writel(AT91_SMC_PULSE_NWE(2) | AT91_SMC_PULSE_NCS_WR(3) |
|
||||
AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(3),
|
||||
&smc->cs[3].pulse);
|
||||
writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
|
||||
&smc->cs[3].cycle);
|
||||
writel(AT91_SMC_TIMINGS_TCLR(2) | AT91_SMC_TIMINGS_TADL(7) |
|
||||
AT91_SMC_TIMINGS_TAR(2) | AT91_SMC_TIMINGS_TRR(3) |
|
||||
AT91_SMC_TIMINGS_TWB(7) | AT91_SMC_TIMINGS_RBNSEL(3)|
|
||||
AT91_SMC_TIMINGS_NFSEL(1), &smc->cs[3].timings);
|
||||
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
|
||||
AT91_SMC_MODE_EXNW_DISABLE |
|
||||
AT91_SMC_MODE_DBW_8 |
|
||||
AT91_SMC_MODE_TDF_CYCLE(3),
|
||||
&smc->cs[3].mode);
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 5, 0); /* D0 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* D1 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* D2 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* D3 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* D4 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* D5 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* D6 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 12, 0); /* D7 */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 13, 0); /* RE */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* WE */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 15, 1); /* NCS */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 16, 1); /* RDY */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 17, 1); /* ALE */
|
||||
at91_set_a_periph(AT91_PIO_PORTC, 18, 1); /* CLE */
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_CMD_USB
|
||||
static void sama5d4_xplained_usb_hw_init(void)
|
||||
{
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 11, 1);
|
||||
at91_set_pio_output(AT91_PIO_PORTE, 14, 1);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_LCD
|
||||
vidinfo_t panel_info = {
|
||||
.vl_col = 480,
|
||||
.vl_row = 272,
|
||||
.vl_clk = 9000,
|
||||
.vl_sync = ATMEL_LCDC_INVLINE_NORMAL | ATMEL_LCDC_INVFRAME_NORMAL,
|
||||
.vl_bpix = LCD_BPP,
|
||||
.vl_bpox = LCD_OUTPUT_BPP,
|
||||
.vl_tft = 1,
|
||||
.vl_hsync_len = 41,
|
||||
.vl_left_margin = 2,
|
||||
.vl_right_margin = 2,
|
||||
.vl_vsync_len = 11,
|
||||
.vl_upper_margin = 2,
|
||||
.vl_lower_margin = 2,
|
||||
.mmio = ATMEL_BASE_LCDC,
|
||||
};
|
||||
|
||||
/* No power up/down pin for the LCD pannel */
|
||||
void lcd_enable(void) { /* Empty! */ }
|
||||
void lcd_disable(void) { /* Empty! */ }
|
||||
|
||||
unsigned int has_lcdc(void)
|
||||
{
|
||||
return 1;
|
||||
}
|
||||
|
||||
static void sama5d4_xplained_lcd_hw_init(void)
|
||||
{
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 24, 0); /* LCDPWM */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 25, 0); /* LCDDISP */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 26, 0); /* LCDVSYNC */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 27, 0); /* LCDHSYNC */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 28, 0); /* LCDDOTCK */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 29, 0); /* LCDDEN */
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 0, 0); /* LCDD0 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 1, 0); /* LCDD1 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 2, 0); /* LCDD2 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 3, 0); /* LCDD3 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 4, 0); /* LCDD4 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 5, 0); /* LCDD5 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 6, 0); /* LCDD6 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 7, 0); /* LCDD7 */
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 8, 0); /* LCDD9 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 9, 0); /* LCDD8 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 10, 0); /* LCDD10 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 11, 0); /* LCDD11 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 12, 0); /* LCDD12 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 13, 0); /* LCDD13 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 14, 0); /* LCDD14 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 15, 0); /* LCDD15 */
|
||||
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 16, 0); /* LCDD16 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 17, 0); /* LCDD17 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 18, 0); /* LCDD18 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 19, 0); /* LCDD19 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 20, 0); /* LCDD20 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 21, 0); /* LCDD21 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 22, 0); /* LCDD22 */
|
||||
at91_set_a_periph(AT91_PIO_PORTA, 23, 0); /* LCDD23 */
|
||||
|
||||
/* Enable clock */
|
||||
at91_periph_clk_enable(ATMEL_ID_LCDC);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_LCD_INFO
|
||||
void lcd_show_board_info(void)
|
||||
{
|
||||
ulong dram_size, nand_size;
|
||||
int i;
|
||||
char temp[32];
|
||||
|
||||
lcd_printf("2014 ATMEL Corp\n");
|
||||
lcd_printf("%s CPU at %s MHz\n", get_cpu_name(),
|
||||
strmhz(temp, get_cpu_clk_rate()));
|
||||
|
||||
dram_size = 0;
|
||||
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
|
||||
dram_size += gd->bd->bi_dram[i].size;
|
||||
|
||||
nand_size = 0;
|
||||
#ifdef CONFIG_NAND_ATMEL
|
||||
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
|
||||
nand_size += nand_info[i].size;
|
||||
#endif
|
||||
lcd_printf("%ld MB SDRAM, %ld MB NAND\n",
|
||||
dram_size >> 20, nand_size >> 20);
|
||||
}
|
||||
#endif /* CONFIG_LCD_INFO */
|
||||
|
||||
#endif /* CONFIG_LCD */
|
||||
|
||||
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
||||
void sama5d4_xplained_mci1_hw_init(void)
|
||||
{
|
||||
at91_set_c_periph(AT91_PIO_PORTE, 19, 1); /* MCI1 CDA */
|
||||
at91_set_c_periph(AT91_PIO_PORTE, 20, 1); /* MCI1 DA0 */
|
||||
at91_set_c_periph(AT91_PIO_PORTE, 21, 1); /* MCI1 DA1 */
|
||||
at91_set_c_periph(AT91_PIO_PORTE, 22, 1); /* MCI1 DA2 */
|
||||
at91_set_c_periph(AT91_PIO_PORTE, 23, 1); /* MCI1 DA3 */
|
||||
at91_set_c_periph(AT91_PIO_PORTE, 18, 0); /* MCI1 CLK */
|
||||
|
||||
/*
|
||||
* As the mci io internal pull down is too strong, so if the io needs
|
||||
* external pull up, the pull up resistor will be very small, if so
|
||||
* the power consumption will increase, so disable the interanl pull
|
||||
* down to save the power.
|
||||
*/
|
||||
at91_set_pio_pulldown(AT91_PIO_PORTE, 18, 0);
|
||||
at91_set_pio_pulldown(AT91_PIO_PORTE, 19, 0);
|
||||
at91_set_pio_pulldown(AT91_PIO_PORTE, 20, 0);
|
||||
at91_set_pio_pulldown(AT91_PIO_PORTE, 21, 0);
|
||||
at91_set_pio_pulldown(AT91_PIO_PORTE, 22, 0);
|
||||
at91_set_pio_pulldown(AT91_PIO_PORTE, 23, 0);
|
||||
|
||||
/* Enable clock */
|
||||
at91_periph_clk_enable(ATMEL_ID_MCI1);
|
||||
}
|
||||
|
||||
int board_mmc_init(bd_t *bis)
|
||||
{
|
||||
return atmel_mci_init((void *)ATMEL_BASE_MCI1);
|
||||
}
|
||||
#endif /* CONFIG_GENERIC_ATMEL_MCI */
|
||||
|
||||
#ifdef CONFIG_MACB
|
||||
void sama5d4_xplained_macb0_hw_init(void)
|
||||
{
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* ETXCK_EREFCK */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 6, 0); /* ERXDV */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* ERX0 */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* ERX1 */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* ERXER */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* ETXEN */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* ETX0 */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 13, 0); /* ETX1 */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* EMDIO */
|
||||
at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* EMDC */
|
||||
|
||||
/* Enable clock */
|
||||
at91_periph_clk_enable(ATMEL_ID_GMAC0);
|
||||
}
|
||||
#endif
|
||||
|
||||
static void sama5d4_xplained_serial3_hw_init(void)
|
||||
{
|
||||
at91_set_b_periph(AT91_PIO_PORTE, 17, 1); /* TXD3 */
|
||||
at91_set_b_periph(AT91_PIO_PORTE, 16, 0); /* RXD3 */
|
||||
|
||||
/* Enable clock */
|
||||
at91_periph_clk_enable(ATMEL_ID_USART3);
|
||||
}
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
at91_periph_clk_enable(ATMEL_ID_PIOA);
|
||||
at91_periph_clk_enable(ATMEL_ID_PIOB);
|
||||
at91_periph_clk_enable(ATMEL_ID_PIOC);
|
||||
at91_periph_clk_enable(ATMEL_ID_PIOD);
|
||||
at91_periph_clk_enable(ATMEL_ID_PIOE);
|
||||
|
||||
sama5d4_xplained_serial3_hw_init();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
/* adress of boot parameters */
|
||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||
|
||||
#ifdef CONFIG_ATMEL_SPI
|
||||
sama5d4_xplained_spi0_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_NAND_ATMEL
|
||||
sama5d4_xplained_nand_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_GENERIC_ATMEL_MCI
|
||||
sama5d4_xplained_mci1_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_MACB
|
||||
sama5d4_xplained_macb0_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_LCD
|
||||
sama5d4_xplained_lcd_hw_init();
|
||||
#endif
|
||||
#ifdef CONFIG_CMD_USB
|
||||
sama5d4_xplained_usb_hw_init();
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
|
||||
CONFIG_SYS_SDRAM_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
|
||||
#ifdef CONFIG_MACB
|
||||
rc = macb_eth_initialize(0, (void *)ATMEL_BASE_GMAC0, 0x00);
|
||||
#endif
|
||||
|
||||
return rc;
|
||||
}
|
||||
3
configs/sama5d4_xplained_mmc_defconfig
Normal file
3
configs/sama5d4_xplained_mmc_defconfig
Normal file
@ -0,0 +1,3 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_MMC"
|
||||
+S:CONFIG_ARM=y
|
||||
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
|
||||
3
configs/sama5d4_xplained_nandflash_defconfig
Normal file
3
configs/sama5d4_xplained_nandflash_defconfig
Normal file
@ -0,0 +1,3 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_NANDFLASH"
|
||||
+S:CONFIG_ARM=y
|
||||
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
|
||||
3
configs/sama5d4_xplained_spiflash_defconfig
Normal file
3
configs/sama5d4_xplained_spiflash_defconfig
Normal file
@ -0,0 +1,3 @@
|
||||
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D4,SYS_USE_SERIALFLASH"
|
||||
+S:CONFIG_ARM=y
|
||||
+S:CONFIG_TARGET_SAMA5D4_XPLAINED=y
|
||||
216
include/configs/sama5d4_xplained.h
Normal file
216
include/configs/sama5d4_xplained.h
Normal file
@ -0,0 +1,216 @@
|
||||
/*
|
||||
* Configuration settings for the SAMA5D4 Xplained ultra board.
|
||||
*
|
||||
* Copyright (C) 2014 Atmel
|
||||
* Bo Shen <voice.shen@atmel.com>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
#include <asm/hardware.h>
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
||||
|
||||
/* ARM asynchronous clock */
|
||||
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
|
||||
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
|
||||
|
||||
#define CONFIG_ARCH_CPU_INIT
|
||||
|
||||
#define CONFIG_SKIP_LOWLEVEL_INIT
|
||||
#define CONFIG_BOARD_EARLY_INIT_F
|
||||
#define CONFIG_DISPLAY_CPUINFO
|
||||
|
||||
#define CONFIG_CMD_BOOTZ
|
||||
#define CONFIG_OF_LIBFDT /* Device Tree support */
|
||||
|
||||
#define CONFIG_SYS_GENERIC_BOARD
|
||||
|
||||
/* general purpose I/O */
|
||||
#define CONFIG_AT91_GPIO
|
||||
|
||||
/* serial console */
|
||||
#define CONFIG_ATMEL_USART
|
||||
#define CONFIG_USART_BASE ATMEL_BASE_USART3
|
||||
#define CONFIG_USART_ID ATMEL_ID_USART3
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/* No NOR flash */
|
||||
#define CONFIG_SYS_NO_FLASH
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
#undef CONFIG_CMD_FPGA
|
||||
#undef CONFIG_CMD_IMI
|
||||
#undef CONFIG_CMD_LOADS
|
||||
#define CONFIG_CMD_PING
|
||||
#define CONFIG_CMD_DHCP
|
||||
#define CONFIG_CMD_SETEXPR
|
||||
|
||||
/* SDRAM */
|
||||
#define CONFIG_NR_DRAM_BANKS 1
|
||||
#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
|
||||
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
|
||||
|
||||
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
||||
|
||||
/* SerialFlash */
|
||||
#define CONFIG_CMD_SF
|
||||
|
||||
#ifdef CONFIG_CMD_SF
|
||||
#define CONFIG_ATMEL_SPI
|
||||
#define CONFIG_ATMEL_SPI0
|
||||
#define CONFIG_SPI_FLASH
|
||||
#define CONFIG_SPI_FLASH_ATMEL
|
||||
#define CONFIG_SF_DEFAULT_BUS 0
|
||||
#define CONFIG_SF_DEFAULT_CS 0
|
||||
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
||||
#endif
|
||||
|
||||
/* NAND flash */
|
||||
#define CONFIG_CMD_NAND
|
||||
|
||||
#ifdef CONFIG_CMD_NAND
|
||||
#define CONFIG_NAND_ATMEL
|
||||
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||
#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
|
||||
/* our ALE is AD21 */
|
||||
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
||||
/* our CLE is AD22 */
|
||||
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
||||
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||
/* PMECC & PMERRLOC */
|
||||
#define CONFIG_ATMEL_NAND_HWECC
|
||||
#define CONFIG_ATMEL_NAND_HW_PMECC
|
||||
#endif
|
||||
|
||||
/* MMC */
|
||||
#define CONFIG_CMD_MMC
|
||||
|
||||
#ifdef CONFIG_CMD_MMC
|
||||
#define CONFIG_MMC
|
||||
#define CONFIG_GENERIC_MMC
|
||||
#define CONFIG_GENERIC_ATMEL_MCI
|
||||
#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
|
||||
#endif
|
||||
|
||||
/* USB */
|
||||
#define CONFIG_CMD_USB
|
||||
|
||||
#ifdef CONFIG_CMD_USB
|
||||
#define CONFIG_USB_EHCI
|
||||
#define CONFIG_USB_EHCI_ATMEL
|
||||
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
|
||||
#define CONFIG_USB_STORAGE
|
||||
#endif
|
||||
|
||||
#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
|
||||
#define CONFIG_CMD_FAT
|
||||
#define CONFIG_DOS_PARTITION
|
||||
#endif
|
||||
|
||||
/* Ethernet Hardware */
|
||||
#define CONFIG_MACB
|
||||
#define CONFIG_RMII
|
||||
#define CONFIG_NET_RETRY_COUNT 20
|
||||
#define CONFIG_MACB_SEARCH_PHY
|
||||
|
||||
/* LCD */
|
||||
/* #define CONFIG_LCD */
|
||||
#ifdef CONFIG_LCD
|
||||
#define LCD_BPP LCD_COLOR16
|
||||
#define LCD_OUTPUT_BPP 24
|
||||
#define CONFIG_LCD_LOGO
|
||||
#define CONFIG_LCD_INFO
|
||||
#define CONFIG_LCD_INFO_BELOW_LOGO
|
||||
#define CONFIG_SYS_WHITE_ON_BLACK
|
||||
#define CONFIG_ATMEL_HLCD
|
||||
#define CONFIG_ATMEL_LCD_RGB565
|
||||
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_USE_SERIALFLASH
|
||||
/* bootstrap + u-boot + env + linux in serial flash */
|
||||
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||
#define CONFIG_ENV_OFFSET 0x10000
|
||||
#define CONFIG_ENV_SIZE 0x10000
|
||||
#define CONFIG_ENV_SECT_SIZE 0x1000
|
||||
#define CONFIG_BOOTCOMMAND "sf probe 0; " \
|
||||
"sf read 0x21000000 0xa0000 0x60000; " \
|
||||
"sf read 0x22000000 0x100000 0x300000; " \
|
||||
"bootz 0x22000000 - 0x21000000"
|
||||
#elif CONFIG_SYS_USE_NANDFLASH
|
||||
/* bootstrap + u-boot + env in nandflash */
|
||||
#define CONFIG_ENV_IS_IN_NAND
|
||||
#define CONFIG_ENV_OFFSET 0xc0000
|
||||
#define CONFIG_ENV_OFFSET_REDUND 0x100000
|
||||
#define CONFIG_ENV_SIZE 0x20000
|
||||
#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \
|
||||
"nand read 0x22000000 0x200000 0x600000;" \
|
||||
"bootz 0x22000000 - 0x21000000"
|
||||
#elif CONFIG_SYS_USE_MMC
|
||||
/* bootstrap + u-boot + env in sd card */
|
||||
#define CONFIG_ENV_IS_IN_FAT
|
||||
#define CONFIG_FAT_WRITE
|
||||
#define FAT_ENV_INTERFACE "mmc"
|
||||
/*
|
||||
* We don't specify the part number, if device 0 has partition table, it means
|
||||
* the first partition; it no partition table, then take whole device as a
|
||||
* FAT file system.
|
||||
*/
|
||||
#define FAT_ENV_DEVICE_AND_PART "0"
|
||||
#define FAT_ENV_FILE "uboot.env"
|
||||
#define CONFIG_ENV_SIZE 0x4000
|
||||
#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d4_xplained.dtb; " \
|
||||
"fatload mmc 0:1 0x22000000 zImage; " \
|
||||
"bootz 0x22000000 - 0x21000000"
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SYS_USE_MMC
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"root=/dev/mmcblk0p2 rw rootwait"
|
||||
#else
|
||||
#define CONFIG_BOOTARGS \
|
||||
"console=ttyS0,115200 earlyprintk " \
|
||||
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
||||
"256K(env),256k(evn_redundent),256k(spare)," \
|
||||
"512k(dtb),6M(kernel)ro,-(rootfs) " \
|
||||
"rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs"
|
||||
#endif
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
#define CONFIG_SYS_PROMPT "U-Boot> "
|
||||
#define CONFIG_SYS_CBSIZE 256
|
||||
#define CONFIG_SYS_MAXARGS 16
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||
#define CONFIG_SYS_LONGHELP
|
||||
#define CONFIG_CMDLINE_EDITING
|
||||
#define CONFIG_AUTO_COMPLETE
|
||||
#define CONFIG_SYS_HUSH_PARSER
|
||||
|
||||
/* Size of malloc() pool */
|
||||
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue
Block a user