rockchip: px30: Rename CONFIG_DEBUG_UART2_CHANNEL to CONFIG_DEBUG_UART_CHANNEL
UART3 also has two sets of pins that can be selected. Rename the config option to a common name, to allow it to be used for both UART2 and UART3. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
parent
b0c5e37d0e
commit
ec4fafdf1f
@ -27,12 +27,12 @@ config TPL_MAX_SIZE
|
||||
config TPL_STACK
|
||||
default 0xff0e4fff
|
||||
|
||||
config DEBUG_UART2_CHANNEL
|
||||
int "Mux channel to use for debug UART2"
|
||||
config DEBUG_UART_CHANNEL
|
||||
int "Mux channel to use for debug UART2/UART3"
|
||||
depends on DEBUG_UART_BOARD_INIT
|
||||
default 0
|
||||
help
|
||||
UART2 can use two different set of pins to route the output.
|
||||
UART2 and UART3 can use two different set of pins to route the output.
|
||||
For using the UART for early debugging the route to use needs
|
||||
to be declared (0 or 1).
|
||||
|
||||
|
@ -222,7 +222,7 @@ void board_debug_uart_init(void)
|
||||
UART2_CLK_SEL_MASK,
|
||||
UART2_CLK_SEL_UART2 << UART2_CLK_SEL_SHIFT);
|
||||
|
||||
#if (CONFIG_DEBUG_UART2_CHANNEL == 1)
|
||||
#if (CONFIG_DEBUG_UART_CHANNEL == 1)
|
||||
/* Enable early UART2 */
|
||||
rk_clrsetreg(&grf->iofunc_con0,
|
||||
CON_IOMUX_UART2SEL_MASK,
|
||||
@ -241,7 +241,7 @@ void board_debug_uart_init(void)
|
||||
GPIO1D3_MASK | GPIO1D2_MASK,
|
||||
GPIO1D3_UART2_RXM0 << GPIO1D3_SHIFT |
|
||||
GPIO1D2_UART2_TXM0 << GPIO1D2_SHIFT);
|
||||
#endif /* CONFIG_DEBUG_UART2_CHANNEL == 1 */
|
||||
#endif /* CONFIG_DEBUG_UART_CHANNEL == 1 */
|
||||
|
||||
#endif /* CONFIG_DEBUG_UART_BASE && CONFIG_DEBUG_UART_BASE == ... */
|
||||
}
|
||||
|
Loading…
Reference in New Issue
Block a user