serial: Use default_serial_puts() in drivers

Replace the in-place ad-hoc implementation of serial_puts() within
the drivers with default_serial_puts() call. This cuts down on the
code duplication quite a bit.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>

arch/mips/cpu/mips32/au1x00/au1x00_serial.c

@@ -103,12 +103,6 @@ static void au1x00_serial_putc(const char c)
 	*uart_tx = (u32)c;
 }
 
-static void au1x00_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static int au1x00_serial_getc(void)
 {
 	volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
@@ -137,7 +131,7 @@ static struct serial_device au1x00_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= au1x00_serial_setbrg,
 	.putc	= au1x00_serial_putc,
-	.puts	= au1x00_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= au1x00_serial_getc,
 	.tstc	= au1x00_serial_tstc,
 };

arch/mips/cpu/mips32/incaip/asc_serial.c

@@ -236,14 +236,6 @@ static void asc_serial_putc(const char c)
     }
 }
 
-static void asc_serial_puts(const char *s)
-{
-    while (*s)
-    {
-	serial_putc (*s++);
-    }
-}
-
 static int asc_serial_getc(void)
 {
     ulong symbol_mask;
@@ -292,7 +284,7 @@ static struct serial_device asc_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= asc_serial_setbrg,
 	.putc	= asc_serial_putc,
-	.puts	= asc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= asc_serial_getc,
 	.tstc	= asc_serial_tstc,
 };

arch/mips/cpu/xburst/jz_serial.c

@@ -109,19 +109,13 @@ static int jz_serial_getc(void)
 	return readb(&uart->rbr_thr_dllr);
 }
 
-static void jz_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static struct serial_device jz_serial_drv = {
 	.name	= "jz_serial",
 	.start	= jz_serial_init,
 	.stop	= NULL,
 	.setbrg	= jz_serial_setbrg,
 	.putc	= jz_serial_putc,
-	.puts	= jz_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= jz_serial_getc,
 	.tstc	= jz_serial_tstc,
 };

arch/powerpc/cpu/mpc5xx/serial.c

@@ -161,21 +161,13 @@ static void mpc5xx_serial_setbrg(void)
 #endif
 }
 
-static void mpc5xx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s);
-		++s;
-	}
-}
-
 static struct serial_device mpc5xx_serial_drv = {
 	.name	= "mpc5xx_serial",
 	.start	= mpc5xx_serial_init,
 	.stop	= NULL,
 	.setbrg	= mpc5xx_serial_setbrg,
 	.putc	= mpc5xx_serial_putc,
-	.puts	= mpc5xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc5xx_serial_getc,
 	.tstc	= mpc5xx_serial_tstc,
 };

arch/powerpc/cpu/mpc8220/uart.c

@@ -84,13 +84,6 @@ static void mpc8220_serial_putc(const char c)
 	psc->xmitbuf[0] = c;
 }
 
-static void mpc8220_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc8220_serial_getc(void)
 {
 	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
@@ -132,7 +125,7 @@ static struct serial_device mpc8220_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= mpc8220_serial_setbrg,
 	.putc	= mpc8220_serial_putc,
-	.puts	= mpc8220_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc8220_serial_getc,
 	.tstc	= mpc8220_serial_tstc,
 };

arch/powerpc/cpu/mpc8260/serial_scc.c

@@ -217,13 +217,6 @@ static void mpc8260_scc_serial_putc(const char c)
 	tbdf->cbd_sc |= BD_SC_READY;
 }
 
-static void mpc8260_scc_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc8260_scc_serial_getc(void)
 {
 	volatile cbd_t		*rbdf;
@@ -267,7 +260,7 @@ static struct serial_device mpc8260_scc_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= mpc8260_scc_serial_setbrg,
 	.putc	= mpc8260_scc_serial_putc,
-	.puts	= mpc8260_scc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc8260_scc_serial_getc,
 	.tstc	= mpc8260_scc_serial_tstc,
 };

arch/powerpc/cpu/mpc8260/serial_smc.c

@@ -216,13 +216,6 @@ static void mpc8260_smc_serial_putc(const char c)
 	rtx->txbd.cbd_sc |= BD_SC_READY;
 }
 
-static void mpc8260_smc_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc8260_smc_serial_getc(void)
 {
 	volatile smc_uart_t	*up;
@@ -270,7 +263,7 @@ static struct serial_device mpc8260_smc_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= mpc8260_smc_serial_setbrg,
 	.putc	= mpc8260_smc_serial_putc,
-	.puts	= mpc8260_smc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc8260_smc_serial_getc,
 	.tstc	= mpc8260_smc_serial_tstc,
 };

arch/powerpc/cpu/mpc85xx/serial_scc.c

@@ -220,13 +220,6 @@ static void mpc85xx_serial_putc(const char c)
 	tbdf->cbd_sc |= BD_SC_READY;
 }
 
-static void mpc85xx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc85xx_serial_getc(void)
 {
 	volatile cbd_t		*rbdf;
@@ -268,7 +261,7 @@ static struct serial_device mpc85xx_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= mpc85xx_serial_setbrg,
 	.putc	= mpc85xx_serial_putc,
-	.puts	= mpc85xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc85xx_serial_getc,
 	.tstc	= mpc85xx_serial_tstc,
 };

arch/sparc/cpu/leon2/serial.c

@@ -105,13 +105,6 @@ static void leon2_serial_putc(const char c)
 	leon2_serial_putc_raw(c);
 }
 
-static void leon2_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
 static int leon2_serial_getc(void)
 {
 	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
@@ -172,7 +165,7 @@ static struct serial_device leon2_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= leon2_serial_setbrg,
 	.putc	= leon2_serial_putc,
-	.puts	= leon2_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= leon2_serial_getc,
 	.tstc	= leon2_serial_tstc,
 };

arch/sparc/cpu/leon3/serial.c

@@ -99,13 +99,6 @@ static void leon3_serial_putc(const char c)
 	leon3_serial_putc_raw(c);
 }
 
-static void leon3_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
 static int leon3_serial_getc(void)
 {
 	if (!leon3_apbuart)
@@ -146,7 +139,7 @@ static struct serial_device leon3_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= leon3_serial_setbrg,
 	.putc	= leon3_serial_putc,
-	.puts	= leon3_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= leon3_serial_getc,
 	.tstc	= leon3_serial_tstc,
 };

board/Marvell/common/serial.c

@@ -139,20 +139,13 @@ static void marvell_serial_setbrg(void)
 
 #endif /* CONFIG_MPSC */
 
-static void marvell_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device marvell_serial_drv = {
 	.name	= "marvell_serial",
 	.start	= marvell_serial_init,
 	.stop	= NULL,
 	.setbrg	= marvell_serial_setbrg,
 	.putc	= marvell_serial_putc,
-	.puts	= marvell_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= marvell_serial_getc,
 	.tstc	= marvell_serial_tstc,
 };

board/cogent/serial.c

@@ -68,12 +68,6 @@ static void cogent_serial_putc(const char c)
 	cma_mb_reg_write (&mbsp->ser_thr, c);
 }
 
-static void cogent_serial_puts(const char *s)
-{
-	while (*s != '\0')
-		serial_putc (*s++);
-}
-
 static int cogent_serial_getc(void)
 {
 	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
@@ -96,7 +90,7 @@ static struct serial_device cogent_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= cogent_serial_setbrg,
 	.putc	= cogent_serial_putc,
-	.puts	= cogent_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= cogent_serial_getc,
 	.tstc	= cogent_serial_tstc,
 };

board/esd/cpci750/serial.c

@@ -75,21 +75,13 @@ static void cpci750_serial_setbrg(void)
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
-
-static void cpci750_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device cpci750_serial_drv = {
 	.name	= "cpci750_serial",
 	.start	= cpci750_serial_init,
 	.stop	= NULL,
 	.setbrg	= cpci750_serial_setbrg,
 	.putc	= cpci750_serial_putc,
-	.puts	= cpci750_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= cpci750_serial_getc,
 	.tstc	= cpci750_serial_tstc,
 };

board/evb64260/serial.c

@@ -139,20 +139,13 @@ static void evb64260_serial_setbrg(void)
 
 #endif /* CONFIG_MPSC */
 
-static void evb64260_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device evb64260_serial_drv = {
 	.name	= "evb64260_serial",
 	.start	= evb64260_serial_init,
 	.stop	= NULL,
 	.setbrg	= evb64260_serial_setbrg,
 	.putc	= evb64260_serial_putc,
-	.puts	= evb64260_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= evb64260_serial_getc,
 	.tstc	= evb64260_serial_tstc,
 };

board/pcippc2/fpga_serial.c

@@ -73,13 +73,6 @@ void fpga_serial_putc (char c)
 	}
 }
 
-void fpga_serial_puts (const char *s)
-{
-	while (*s) {
-		fpga_serial_print (*s++);
-	}
-}
-
 int fpga_serial_getc (void)
 {
 	while ((in8 (UART (LSR)) & 0x01) == 0);

board/pcippc2/fpga_serial.h

@@ -26,7 +26,6 @@
 
 extern void	fpga_serial_init	(int);
 extern void	fpga_serial_putc	(char);
-extern void	fpga_serial_puts	(const char *);
 extern int	fpga_serial_getc	(void);
 extern int	fpga_serial_tstc	(void);
 extern void	fpga_serial_setbrg	(void);

board/pcippc2/pcippc2.c

@@ -29,6 +29,7 @@
 #include <watchdog.h>
 #include <pci.h>
 #include <netdev.h>
+#include <serial.h>
 
 #include "hardware.h"
 #include "pcippc2.h"
@@ -129,7 +130,7 @@ int misc_init_r (void)
 	fpga_serial_init (sconsole_get_baudrate ());
 
 	sconsole_putc   = fpga_serial_putc;
-	sconsole_puts   = fpga_serial_puts;
+	sconsole_puts   = default_serial_puts;
 	sconsole_getc   = fpga_serial_getc;
 	sconsole_tstc   = fpga_serial_tstc;
 	sconsole_setbrg = fpga_serial_setbrg;

board/prodrive/p3mx/serial.c

@@ -75,21 +75,13 @@ static void p3mx_serial_setbrg(void)
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
-
-static void p3mx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device p3mx_serial_drv = {
 	.name	= "p3mx_serial",
 	.start	= p3mx_serial_init,
 	.stop	= NULL,
 	.setbrg	= p3mx_serial_setbrg,
 	.putc	= p3mx_serial_putc,
-	.puts	= p3mx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= p3mx_serial_getc,
 	.tstc	= p3mx_serial_tstc,
 };

drivers/serial/altera_jtag_uart.c

@@ -59,12 +59,6 @@ static void altera_jtag_serial_putc(char c)
 	writel ((unsigned char)c, &jtag->data);
 }
 
-static void altera_jtag_serial_puts(const char *s)
-{
-	while (*s != 0)
-		serial_putc (*s++);
-}
-
 static int altera_jtag_serial_tstc(void)
 {
 	return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
@@ -91,7 +85,7 @@ static struct serial_device altera_jtag_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= altera_jtag_serial_setbrg,
 	.putc	= altera_jtag_serial_putc,
-	.puts	= altera_jtag_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= altera_jtag_serial_getc,
 	.tstc	= altera_jtag_serial_tstc,
 };

drivers/serial/altera_uart.c

@@ -82,13 +82,6 @@ static void altera_serial_putc(char c)
 	writel ((unsigned char)c, &uart->txdata);
 }
 
-static void altera_serial_puts(const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
 static int altera_serial_tstc(void)
 {
 	return (readl (&uart->status) & NIOS_UART_RRDY);
@@ -107,7 +100,7 @@ static struct serial_device altera_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= altera_serial_setbrg,
 	.putc	= altera_serial_putc,
-	.puts	= altera_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= altera_serial_getc,
 	.tstc	= altera_serial_tstc,
 };

drivers/serial/atmel_usart.c

@@ -86,12 +86,6 @@ static void atmel_serial_putc(char c)
 	writel(c, &usart->thr);
 }
 
-static void atmel_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static int atmel_serial_getc(void)
 {
 	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
@@ -113,7 +107,7 @@ static struct serial_device atmel_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= atmel_serial_setbrg,
 	.putc	= atmel_serial_putc,
-	.puts	= atmel_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= atmel_serial_getc,
 	.tstc	= atmel_serial_tstc,
 };

drivers/serial/lpc32xx_hsuart.c

@@ -77,19 +77,13 @@ static int lpc32xx_serial_init(void)
 	return 0;
 }
 
-static void lpc32xx_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static struct serial_device lpc32xx_serial_drv = {
 	.name	= "lpc32xx_serial",
 	.start	= lpc32xx_serial_init,
 	.stop	= NULL,
 	.setbrg	= lpc32xx_serial_setbrg,
 	.putc	= lpc32xx_serial_putc,
-	.puts	= lpc32xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= lpc32xx_serial_getc,
 	.tstc	= lpc32xx_serial_tstc,
 };

drivers/serial/mcfuart.c

@@ -87,13 +87,6 @@ static void mcf_serial_putc(const char c)
 	uart->utb = c;
 }
 
-static void mcf_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
 static int mcf_serial_getc(void)
 {
 	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
@@ -136,7 +129,7 @@ static struct serial_device mcf_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= mcf_serial_setbrg,
 	.putc	= mcf_serial_putc,
-	.puts	= mcf_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mcf_serial_getc,
 	.tstc	= mcf_serial_tstc,
 };

drivers/serial/ns9750_serial.c

@@ -99,19 +99,6 @@ static void ns9750_serial_putc(const char c)
 						    CONSOLE) = c;
 }
 
-/***********************************************************************
- * @Function: serial_puts
- * @Return: n/a
- * @Descr: writes non-zero string to the FIFO.
- ***********************************************************************/
-
-static void ns9750_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc( *s++ );
-	}
-}
-
 /***********************************************************************
  * @Function: serial_getc
  * @Return: the character read
@@ -215,7 +202,7 @@ static struct serial_device ns9750_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= ns9750_serial_setbrg,
 	.putc	= ns9750_serial_putc,
-	.puts	= ns9750_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= ns9750_serial_getc,
 	.tstc	= ns9750_serial_tstc,
 };

drivers/serial/opencores_yanu.c

@@ -161,14 +161,6 @@ static void oc_serial_putc(char c)
 	writel((unsigned char)c, &uart->data);
 }
 
-static void oc_serial_puts(const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
-
 static int oc_serial_tstc(void)
 {
 	unsigned status ;
@@ -195,7 +187,7 @@ static struct serial_device oc_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= oc_serial_setbrg,
 	.putc	= oc_serial_putc,
-	.puts	= oc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= oc_serial_getc,
 	.tstc	= oc_serial_tstc,
 };

drivers/serial/s3c4510b_uart.c

@@ -199,12 +199,10 @@ static int s3c4510b_serial_getc(void)
 
 static void s3c4510b_serial_puts(const char *s)
 {
-	while (*s) {
-		serial_putc (*s++);
-	}
+	default_serial_puts(s);
 
 	/* busy wait for tx complete */
-	while ( !uart->m_stat.bf.txComplete);
+	while (!uart->m_stat.bf.txComplete);
 
 	/* clear break */
 	uart->m_ctrl.bf.sendBreak = 0;

drivers/serial/s3c64xx.c

@@ -166,19 +166,13 @@ static int s3c64xx_serial_tstc(void)
 	return uart->UTRSTAT & 0x1;
 }
 
-static void s3c64xx_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static struct serial_device s3c64xx_serial_drv = {
 	.name	= "s3c64xx_serial",
 	.start	= s3c64xx_serial_init,
 	.stop	= NULL,
 	.setbrg	= s3c64xx_serial_setbrg,
 	.putc	= s3c64xx_serial_putc,
-	.puts	= s3c64xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= s3c64xx_serial_getc,
 	.tstc	= s3c64xx_serial_tstc,
 };

drivers/serial/serial_clps7111.c

@@ -112,20 +112,13 @@ static int clps7111_serial_getc(void)
 	return IO_UARTDR1 & 0xff;
 }
 
-static void clps7111_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device clps7111_serial_drv = {
 	.name	= "clps7111_serial",
 	.start	= clps7111_serial_init,
 	.stop	= NULL,
 	.setbrg	= clps7111_serial_setbrg,
 	.putc	= clps7111_serial_putc,
-	.puts	= clps7111_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= clps7111_serial_getc,
 	.tstc	= clps7111_serial_tstc,
 };

drivers/serial/serial_imx.c

@@ -214,20 +214,13 @@ static int imx_serial_tstc(void)
 	return 1;
 }
 
-static void imx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device imx_serial_drv = {
 	.name	= "imx_serial",
 	.start	= imx_serial_init,
 	.stop	= NULL,
 	.setbrg	= imx_serial_setbrg,
 	.putc	= imx_serial_putc,
-	.puts	= imx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= imx_serial_getc,
 	.tstc	= imx_serial_tstc,
 };

drivers/serial/serial_ixp.c

@@ -121,20 +121,13 @@ static int ixp_serial_getc(void)
 	return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
 }
 
-static void ixp_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device ixp_serial_drv = {
 	.name	= "ixp_serial",
 	.start	= ixp_serial_init,
 	.stop	= NULL,
 	.setbrg	= ixp_serial_setbrg,
 	.putc	= ixp_serial_putc,
-	.puts	= ixp_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= ixp_serial_getc,
 	.tstc	= ixp_serial_tstc,
 };

drivers/serial/serial_ks8695.c

@@ -102,13 +102,6 @@ static int ks8695_serial_tstc(void)
 	return 0;
 }
 
-static void ks8695_serial_puts(const char *s)
-{
-	char c;
-	while ((c = *s++) != 0)
-		serial_putc(c);
-}
-
 static int ks8695_serial_getc(void)
 {
 	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
@@ -124,7 +117,7 @@ static struct serial_device ks8695_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= ks8695_serial_setbrg,
 	.putc	= ks8695_serial_putc,
-	.puts	= ks8695_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= ks8695_serial_getc,
 	.tstc	= ks8695_serial_tstc,
 };

drivers/serial/serial_lh7a40x.c

@@ -175,20 +175,13 @@ static int lh7a40x_serial_tstc(void)
 	return(!(uart->status & UART_RXFE));
 }
 
-static void lh7a40x_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device lh7a40x_serial_drv = {
 	.name	= "lh7a40x_serial",
 	.start	= lh7a40x_serial_init,
 	.stop	= NULL,
 	.setbrg	= lh7a40x_serial_setbrg,
 	.putc	= lh7a40x_serial_putc,
-	.puts	= lh7a40x_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= lh7a40x_serial_getc,
 	.tstc	= lh7a40x_serial_tstc,
 };

drivers/serial/serial_lpc2292.c

@@ -89,13 +89,6 @@ static int lpc2292_serial_getc(void)
 	return GET8(U0RBR);
 }
 
-static void lpc2292_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 /* Test if there is a byte to read */
 static int lpc2292_serial_tstc(void)
 {
@@ -108,7 +101,7 @@ static struct serial_device lpc2292_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= lpc2292_serial_setbrg,
 	.putc	= lpc2292_serial_putc,
-	.puts	= lpc2292_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= lpc2292_serial_getc,
 	.tstc	= lpc2292_serial_tstc,
 };

drivers/serial/serial_mxc.c

@@ -187,13 +187,6 @@ static int mxc_serial_tstc(void)
 	return 1;
 }
 
-static void mxc_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
@@ -228,7 +221,7 @@ static struct serial_device mxc_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= mxc_serial_setbrg,
 	.putc	= mxc_serial_putc,
-	.puts	= mxc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mxc_serial_getc,
 	.tstc	= mxc_serial_tstc,
 };

drivers/serial/serial_netarm.c

@@ -182,20 +182,13 @@ static int netarm_serial_getc(void)
 	return ch_uint & 0xff;
 }
 
-static void netarm_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device netarm_serial_drv = {
 	.name	= "netarm_serial",
 	.start	= netarm_serial_init,
 	.stop	= NULL,
 	.setbrg	= netarm_serial_setbrg,
 	.putc	= netarm_serial_putc,
-	.puts	= netarm_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= netarm_serial_getc,
 	.tstc	= netarm_serial_tstc,
 };

drivers/serial/serial_pl01x.c

@@ -179,13 +179,6 @@ static void pl01x_serial_putc(const char c)
 	pl01x_putc (CONSOLE_PORT, c);
 }
 
-static void pl01x_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int pl01x_serial_getc(void)
 {
 	return pl01x_getc (CONSOLE_PORT);
@@ -259,7 +252,7 @@ static struct serial_device pl01x_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= pl01x_serial_setbrg,
 	.putc	= pl01x_serial_putc,
-	.puts	= pl01x_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= pl01x_serial_getc,
 	.tstc	= pl01x_serial_tstc,
 };

drivers/serial/serial_s3c44b0.c

@@ -209,20 +209,13 @@ static int s3c44b0_serial_getc(void)
 	}
 }
 
-static void s3c44b0_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device s3c44b0_serial_drv = {
 	.name	= "s3c44b0_serial",
 	.start	= s3c44b0_serial_init,
 	.stop	= NULL,
 	.setbrg	= s3c44b0_serial_setbrg,
 	.putc	= s3c44b0_serial_putc,
-	.puts	= s3c44b0_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= s3c44b0_serial_getc,
 	.tstc	= s3c44b0_serial_tstc,
 };

drivers/serial/serial_sa1100.c

@@ -153,20 +153,13 @@ static int sa1100_serial_getc(void)
 #endif
 }
 
-static void sa1100_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device sa1100_serial_drv = {
 	.name	= "sa1100_serial",
 	.start	= sa1100_serial_init,
 	.stop	= NULL,
 	.setbrg	= sa1100_serial_setbrg,
 	.putc	= sa1100_serial_putc,
-	.puts	= sa1100_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= sa1100_serial_getc,
 	.tstc	= sa1100_serial_tstc,
 };

drivers/serial/serial_sh.c

@@ -136,13 +136,6 @@ static void sh_serial_putc(const char c)
 	serial_raw_putc(c);
 }
 
-static void sh_serial_puts(const char *s)
-{
-	char c;
-	while ((c = *s++) != 0)
-		serial_putc(c);
-}
-
 static int sh_serial_tstc(void)
 {
 	return serial_rx_fifo_level() ? 1 : 0;
@@ -196,7 +189,7 @@ static struct serial_device sh_serial_drv = {
 	.stop	= NULL,
 	.setbrg	= sh_serial_setbrg,
 	.putc	= sh_serial_putc,
-	.puts	= sh_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= sh_serial_getc,
 	.tstc	= sh_serial_tstc,
 };