leandrof/u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

driver/ddr/fsl: Add address parity support for DDR4 UDIMM/discrete

Browse Source 
Add support of address parity for DDR4 UDIMM or discrete memory.
It requires to configurate corresponding MR5[2:0] and
TIMING_CFG_7[PAR_LAT]. Parity can be turned on by hwconfig,
e.g. hwconfig=fsl_ddr:parity=on.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
This commit is contained in:
Shengzhou Liu 2016-03-10 17:36:56 +08:00 committed by York Sun
parent 5e8e27b743
commit eb118807a4
4 changed files with 82 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
doc/README.fsl-ddr
View File

@ -123,6 +123,14 @@ ECC can be turned on/off by hwconfig.
Syntax is
hwconfig=fsl_ddr:ecc=off
Memory address parity on/off
============================
address parity can be turned on/off by hwconfig.
Syntax is:
hwconfig=fsl_ddr:parity=on
Memory testing options for mpc85xx
==================================
1. Memory test can be done once U-Boot prompt comes up using mtest, or
@ -143,6 +151,7 @@ platform
hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3,ecc=on
Table for dynamic ODT for DDR3
==============================
For single-slot system with quad-rank DIMM and dual-slot system, dynamic ODT may

55
drivers/ddr/fsl/ctrl_regs.c
View File

@ -895,11 +895,15 @@ static void set_ddr_sdram_cfg_2(const unsigned int ctrl_num,
slow = get_ddr_freq(ctrl_num) < 1249000000;
#endif
if (popts->registered_dimm_en) {
if (popts->registered_dimm_en)
rcw_en = 1;
ap_en = popts->ap_en;
} else {
/* DDR4 can have address parity for UDIMM and discrete */
if ((CONFIG_FSL_SDRAM_TYPE != SDRAM_TYPE_DDR4) &&
(!popts->registered_dimm_en)) {
ap_en = 0;
} else {
ap_en = popts->ap_en;
}
x4_en = popts->x4_en ? 1 : 0;
@ -1135,6 +1139,7 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
unsigned short esdmode5; /* Extended SDRAM mode 5 */
int rtt_park = 0;
bool four_cs = false;
const unsigned int mclk_ps = get_memory_clk_period_ps(0);
#if CONFIG_CHIP_SELECTS_PER_CTRL == 4
if ((ddr->cs[0].config & SDRAM_CS_CONFIG_EN) &&
@ -1150,6 +1155,19 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
esdmode5 = 0x00000400; /* Data mask enabled */
}
/* set command/address parity latency */
if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
if (mclk_ps >= 935) {
/* for DDR4-1600/1866/2133 */
esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK;
} else if (mclk_ps >= 833) {
/* for DDR4-2400 */
esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK;
} else {
printf("parity: mclk_ps = %d not supported\n", mclk_ps);
}
}
ddr->ddr_sdram_mode_9 = (0
| ((esdmode4 & 0xffff) << 16)
| ((esdmode5 & 0xffff) << 0)
@ -1170,6 +1188,20 @@ static void set_ddr_sdram_mode_9(fsl_ddr_cfg_regs_t *ddr,
} else {
esdmode5 = 0x00000400;
}
if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
if (mclk_ps >= 935) {
/* for DDR4-1600/1866/2133 */
esdmode5 |= DDR_MR5_CA_PARITY_LAT_4_CLK;
} else if (mclk_ps >= 833) {
/* for DDR4-2400 */
esdmode5 |= DDR_MR5_CA_PARITY_LAT_5_CLK;
} else {
printf("parity: mclk_ps = %d not supported\n",
mclk_ps);
}
}
switch (i) {
case 1:
ddr->ddr_sdram_mode_11 = (0
@ -1925,12 +1957,25 @@ static void set_timing_cfg_7(const unsigned int ctrl_num,
const common_timing_params_t *common_dimm)
{
unsigned int txpr, tcksre, tcksrx;
unsigned int cke_rst, cksre, cksrx, par_lat, cs_to_cmd;
unsigned int cke_rst, cksre, cksrx, par_lat = 0, cs_to_cmd;
const unsigned int mclk_ps = get_memory_clk_period_ps(ctrl_num);
txpr = max(5U, picos_to_mclk(ctrl_num, common_dimm->trfc1_ps + 10000));
tcksre = max(5U, picos_to_mclk(ctrl_num, 10000));
tcksrx = max(5U, picos_to_mclk(ctrl_num, 10000));
par_lat = 0;
if (ddr->ddr_sdram_cfg_2 & SDRAM_CFG2_AP_EN) {
if (mclk_ps >= 935) {
/* parity latency 4 clocks in case of 1600/1866/2133 */
par_lat = 4;
} else if (mclk_ps >= 833) {
/* parity latency 5 clocks for DDR4-2400 */
par_lat = 5;
} else {
printf("parity: mclk_ps = %d not supported\n", mclk_ps);
}
}
cs_to_cmd = 0;
if (txpr <= 200)

15
drivers/ddr/fsl/options.c
View File

@ -1002,8 +1002,19 @@ unsigned int populate_memctl_options(const common_timing_params_t *common_dimm,
popts->twot_en = 0;
popts->threet_en = 0;
/* for RDIMM, address parity enable */
popts->ap_en = 1;
/* for RDIMM and DDR4 UDIMM/discrete memory, address parity enable */
if (popts->registered_dimm_en)
popts->ap_en = 1; /* 0 = disable, 1 = enable */
else
popts->ap_en = 0; /* disabled for DDR4 UDIMM/discrete default */
if (hwconfig_sub_f("fsl_ddr", "parity", buf)) {
if (hwconfig_subarg_cmp_f("fsl_ddr", "parity", "on", buf)) {
if (popts->registered_dimm_en ||
(CONFIG_FSL_SDRAM_TYPE == SDRAM_TYPE_DDR4))
popts->ap_en = 1;
}
}
/*
* BSTTOPRE precharge interval

11
include/fsl_ddr_sdram.h
View File

@ -123,6 +123,7 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define SDRAM_CFG2_FRC_SR 0x80000000
#define SDRAM_CFG2_D_INIT 0x00000010
#define SDRAM_CFG2_AP_EN 0x00000020
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
#define SDRAM_CFG2_ODT_NEVER 0
#define SDRAM_CFG2_ODT_ONLY_WRITE 1
@ -177,6 +178,14 @@ typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
#define DDR_CDR2_VREF_RANGE_2 0x00000040
/* DDR ERR_DISABLE */
#define DDR_ERR_DISABLE_APED (1 << 8) /* Address parity error disable */
/* Mode Registers */
#define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */
#define DDR_MR5_CA_PARITY_LAT_5_CLK 0x2 /* for DDR4-2400 */
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
#ifdef CONFIG_SYS_FSL_DDR3L
@ -343,7 +352,7 @@ typedef struct memctl_options_s {
/* mirrior DIMMs for DDR3 */
unsigned int mirrored_dimm;
unsigned int quad_rank_present;
unsigned int ap_en; /* address parity enable for RDIMM */
unsigned int ap_en; /* address parity enable for RDIMM/DDR4-UDIMM */
unsigned int x4_en; /* enable x4 devices */
/* Global Timing Parameters */