treewide: Migrate CONFIG_SYS_ALT_MEMTEST to Kconfig

Migrate the CONFIG_SYS_ALT_MEMTEST option to Kconfig. Signed-off-by: Mario Six <mario.six@gdsys.cc> [trini: Re-run migration after also including CMD_MEMTEST] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-03-28 14:38:14 +02:00 · 2018-03-28 14:38:14 +02:00 · e89f8aae3d
commit e89f8aae3d
parent c9542eae0b
132 changed files with 74 additions and 88 deletions
--- a/3
+++ b/3
@ -2802,9 +2802,6 @@ Configuration Settings:
 		Begin and End addresses of the area used by the
 		simple memory test.

- CONFIG_SYS_ALT_MEMTEST:
-		Enable an alternate, more extensive memory test.
-
 - CONFIG_SYS_MEMTEST_SCRATCH:
 		Scratch address used by the alternate memory test
 		You only need to set this if address zero isn't writeable
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@ -533,6 +533,15 @@ config CMD_MEMTEST
 	help
 	  Simple RAM read/write test.

+if CMD_MEMTEST
+
+config SYS_ALT_MEMTEST
+	bool "Alternative test"
+	help
+	  Use a more complete alternative memory test.
+
+endif
+
 config CMD_MX_CYCLIC
 	bool "mdc, mwc"
 	help
--- a/configs/T1023RDB_NAND_defconfig
+++ b/configs/T1023RDB_NAND_defconfig
@ -22,6 +22,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/T1023RDB_SDCARD_defconfig
+++ b/configs/T1023RDB_SDCARD_defconfig
@ -22,6 +22,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/T1023RDB_SECURE_BOOT_defconfig
+++ b/configs/T1023RDB_SECURE_BOOT_defconfig
@ -14,6 +14,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T1023RDB_SPIFLASH_defconfig
+++ b/configs/T1023RDB_SPIFLASH_defconfig
@ -23,6 +23,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/T1023RDB_defconfig
+++ b/configs/T1023RDB_defconfig
@ -12,6 +12,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T1024RDB_NAND_defconfig
+++ b/configs/T1024RDB_NAND_defconfig
@ -25,6 +25,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T1024RDB_SDCARD_defconfig
+++ b/configs/T1024RDB_SDCARD_defconfig
@ -25,6 +25,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T1024RDB_SECURE_BOOT_defconfig
+++ b/configs/T1024RDB_SECURE_BOOT_defconfig
@ -16,6 +16,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T1024RDB_SPIFLASH_defconfig
+++ b/configs/T1024RDB_SPIFLASH_defconfig
@ -26,6 +26,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T1024RDB_defconfig
+++ b/configs/T1024RDB_defconfig
@ -14,6 +14,7 @@ CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T2080RDB_NAND_defconfig
+++ b/configs/T2080RDB_NAND_defconfig
@ -21,6 +21,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T2080RDB_SDCARD_defconfig
+++ b/configs/T2080RDB_SDCARD_defconfig
@ -21,6 +21,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T2080RDB_SECURE_BOOT_defconfig
+++ b/configs/T2080RDB_SECURE_BOOT_defconfig
@ -12,6 +12,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T2080RDB_SPIFLASH_defconfig
+++ b/configs/T2080RDB_SPIFLASH_defconfig
@ -22,6 +22,7 @@ CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig
+++ b/configs/T2080RDB_SRIO_PCIE_BOOT_defconfig
@ -10,6 +10,7 @@ CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE"
 CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/T2080RDB_defconfig
+++ b/configs/T2080RDB_defconfig
@ -10,6 +10,7 @@ CONFIG_BOOTDELAY=10
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ap121_defconfig
+++ b/configs/ap121_defconfig
@ -18,6 +18,7 @@ CONFIG_SYS_PROMPT="ap121 # "
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_EDITENV is not set
 # CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
--- a/configs/ap143_defconfig
+++ b/configs/ap143_defconfig
@ -19,6 +19,7 @@ CONFIG_SYS_PROMPT="ap143 # "
 # CONFIG_CMD_IMPORTENV is not set
 # CONFIG_CMD_EDITENV is not set
 # CONFIG_CMD_CRC32 is not set
+CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
--- a/configs/apalis_imx6_defconfig
+++ b/configs/apalis_imx6_defconfig
@ -30,6 +30,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/apalis_imx6_nospl_com_defconfig
+++ b/configs/apalis_imx6_nospl_com_defconfig
@ -20,6 +20,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/apalis_imx6_nospl_it_defconfig
+++ b/configs/apalis_imx6_nospl_it_defconfig
@ -20,6 +20,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/colibri_imx6_defconfig
+++ b/configs/colibri_imx6_defconfig
@ -30,6 +30,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/colibri_imx6_nospl_defconfig
+++ b/configs/colibri_imx6_nospl_defconfig
@ -20,6 +20,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_ASKENV=y
 CONFIG_CRC32_VERIFY=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/ls1012a2g5rdb_qspi_defconfig
+++ b/configs/ls1012a2g5rdb_qspi_defconfig
@ -16,6 +16,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/ls1012afrdm_qspi_defconfig
+++ b/configs/ls1012afrdm_qspi_defconfig
@ -16,6 +16,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_SF=y
--- a/configs/ls1012aqds_qspi_defconfig
+++ b/configs/ls1012aqds_qspi_defconfig
@ -18,6 +18,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
 CONFIG_CMD_EEPROM=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1012ardb_qspi_SECURE_BOOT_defconfig
@ -18,6 +18,7 @@ CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/ls1012ardb_qspi_defconfig
+++ b/configs/ls1012ardb_qspi_defconfig
@ -16,6 +16,7 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/ls1088aqds_defconfig
+++ b/configs/ls1088aqds_defconfig
@ -10,6 +10,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4"
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
--- a/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088aqds_qspi_SECURE_BOOT_defconfig
@ -13,6 +13,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ls1088aqds_qspi_defconfig
+++ b/configs/ls1088aqds_qspi_defconfig
@ -12,6 +12,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ls1088aqds_sdcard_ifc_defconfig
+++ b/configs/ls1088aqds_sdcard_ifc_defconfig
@ -20,6 +20,7 @@ CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
--- a/configs/ls1088aqds_sdcard_qspi_defconfig
+++ b/configs/ls1088aqds_sdcard_qspi_defconfig
@ -22,6 +22,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_qspi_SECURE_BOOT_defconfig
@ -13,6 +13,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ls1088ardb_qspi_defconfig
+++ b/configs/ls1088ardb_qspi_defconfig
@ -12,6 +12,7 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_SYS_EXTRA_OPTIONS="SYS_FSL_DDR4, QSPI_BOOT"
 # CONFIG_USE_BOOTCOMMAND is not set
 # CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig
@ -25,6 +25,7 @@ CONFIG_SPL_HASH_SUPPORT=y
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/ls1088ardb_sdcard_qspi_defconfig
+++ b/configs/ls1088ardb_sdcard_qspi_defconfig
@ -22,6 +22,7 @@ CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0
 CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_SF=y
--- a/configs/mx6qsabrelite_defconfig
+++ b/configs/mx6qsabrelite_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/mx7ulp_evk_defconfig
+++ b/configs/mx7ulp_evk_defconfig
@ -6,6 +6,7 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/mx7ulp_evk_plugin_defconfig
+++ b/configs/mx7ulp_evk_plugin_defconfig
@ -5,6 +5,7 @@ CONFIG_TARGET_MX7ULP_EVK=y
 CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
 CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/nitrogen6dl2g_defconfig
+++ b/configs/nitrogen6dl2g_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/nitrogen6dl_defconfig
+++ b/configs/nitrogen6dl_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/nitrogen6q2g_defconfig
+++ b/configs/nitrogen6q2g_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/nitrogen6q_defconfig
+++ b/configs/nitrogen6q_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/nitrogen6s1g_defconfig
+++ b/configs/nitrogen6s1g_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/nitrogen6s_defconfig
+++ b/configs/nitrogen6s_defconfig
@ -13,6 +13,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_BUF_ADDR=0x12000000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
--- a/configs/s32v234evb_defconfig
+++ b/configs/s32v234evb_defconfig
@ -8,5 +8,6 @@ CONFIG_USE_BOOTARGS=y
 CONFIG_BOOTARGS="console=ttyLF0 root=/dev/ram rw"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_OF_LIBFDT=y
--- a/configs/strider_con_defconfig
+++ b/configs/strider_con_defconfig
@ -18,6 +18,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_FPGAD=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/strider_con_dp_defconfig
+++ b/configs/strider_con_dp_defconfig
@ -18,6 +18,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_FPGAD=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/strider_cpu_defconfig
+++ b/configs/strider_cpu_defconfig
@ -18,6 +18,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_FPGAD=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/strider_cpu_dp_defconfig
+++ b/configs/strider_cpu_dp_defconfig
@ -18,6 +18,7 @@ CONFIG_AUTOBOOT_KEYED=y
 CONFIG_AUTOBOOT_STOP_STR=" "
 CONFIG_CMD_IMLS=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_FPGAD=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/topic_miami_defconfig
+++ b/configs/topic_miami_defconfig
@ -15,6 +15,7 @@ CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_PROMPT="zynq-uboot> "
 CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
--- a/configs/topic_miamilite_defconfig
+++ b/configs/topic_miamilite_defconfig
@ -15,6 +15,7 @@ CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_PROMPT="zynq-uboot> "
 CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
--- a/configs/topic_miamiplus_defconfig
+++ b/configs/topic_miamiplus_defconfig
@ -15,6 +15,7 @@ CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd"
 CONFIG_SPL_STACK_R=y
 CONFIG_SYS_PROMPT="zynq-uboot> "
 CONFIG_CMD_THOR_DOWNLOAD=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPIO=y
--- a/configs/tplink_wdr4300_defconfig
+++ b/configs/tplink_wdr4300_defconfig
@ -13,6 +13,7 @@ CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
 # CONFIG_CMD_ELF is not set
 # CONFIG_CMD_XIMG is not set
+CONFIG_CMD_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_SF=y
 CONFIG_CMD_SPI=y
--- a/configs/wb50n_defconfig
+++ b/configs/wb50n_defconfig
@ -14,6 +14,7 @@ CONFIG_BOOTDELAY=3
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_NAND=y
--- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig
@ -24,6 +24,7 @@ CONFIG_FASTBOOT_FLASH=y
 CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig
@ -24,6 +24,7 @@ CONFIG_FASTBOOT=y
 CONFIG_FASTBOOT_FLASH=y
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig
@ -17,6 +17,7 @@ CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
--- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
+++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig
@ -18,6 +18,7 @@ CONFIG_SPL_RAM_SUPPORT=y
 CONFIG_SPL_RAM_DEVICE=y
 CONFIG_SYS_PROMPT="ZynqMP> "
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_FPGA_LOADBP=y
--- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig
@ -25,6 +25,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/xilinx_zynqmp_zcu102_revA_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig
@ -25,6 +25,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/xilinx_zynqmp_zcu102_revB_defconfig
+++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig
@ -25,6 +25,7 @@ CONFIG_FASTBOOT_FLASH_MMC_DEV=0
 CONFIG_CMD_THOR_DOWNLOAD=y
 CONFIG_CMD_EEPROM=y
 CONFIG_CMD_MEMTEST=y
+CONFIG_SYS_ALT_MEMTEST=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
--- a/configs/zc5202_defconfig
+++ b/configs/zc5202_defconfig
@ -20,6 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="imx6q-zc5202.dtb"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/configs/zc5601_defconfig
+++ b/configs/zc5601_defconfig
@ -20,6 +20,7 @@ CONFIG_DEFAULT_FDT_FILE="imx6q-zc5601.dtb"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_EXT_SUPPORT=y
 CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_CMD_MEMTEST=y
 CONFIG_CMD_GPIO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
--- a/include/configs/B4860QDS.h
+++ b/include/configs/B4860QDS.h
@ -167,7 +167,6 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/MigoR.h
+++ b/include/configs/MigoR.h
@ -33,7 +33,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))

 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH

--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@ -111,7 +111,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/T102xQDS.h
+++ b/include/configs/T102xQDS.h
@ -189,7 +189,6 @@ unsigned long get_board_ddr_clk(void);

 #define CONFIG_SYS_MEMTEST_START	0x00200000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/T102xRDB.h
+++ b/include/configs/T102xRDB.h
@ -212,7 +212,6 @@ unsigned long get_board_ddr_clk(void);

 #define CONFIG_SYS_MEMTEST_START	0x00200000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/T1040QDS.h
+++ b/include/configs/T1040QDS.h
@ -122,7 +122,6 @@ unsigned long get_board_ddr_clk(void);

 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@ -219,7 +219,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg

 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/T208xRDB.h
+++ b/include/configs/T208xRDB.h
@ -111,7 +111,6 @@

 #define CONFIG_SYS_MEMTEST_START	0x00200000 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 #ifdef CONFIG_MTD_NOR_FLASH
 #define CONFIG_FLASH_CFI_DRIVER
--- a/include/configs/T4240RDB.h
+++ b/include/configs/T4240RDB.h
@ -89,7 +89,6 @@

 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/ap121.h
+++ b/include/configs/ap121.h
@ -43,6 +43,5 @@
 */
 #define CONFIG_SYS_MEMTEST_START        0x80100000
 #define CONFIG_SYS_MEMTEST_END          0x83f00000
-#define CONFIG_CMD_MEMTEST

 #endif  /* __CONFIG_H */
--- a/include/configs/ap143.h
+++ b/include/configs/ap143.h
@ -47,6 +47,5 @@
 */
 #define CONFIG_SYS_MEMTEST_START        0x80100000
 #define CONFIG_SYS_MEMTEST_END          0x83f00000
-#define CONFIG_CMD_MEMTEST

 #endif  /* __CONFIG_H */
--- a/include/configs/ap325rxa.h
+++ b/include/configs/ap325rxa.h
@ -37,7 +37,6 @@
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))

 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH

--- a/include/configs/ap_sh4a_4a.h
+++ b/include/configs/ap_sh4a_4a.h
@ -44,7 +44,6 @@
 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE)
 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH

--- a/include/configs/apalis_imx6.h
+++ b/include/configs/apalis_imx6.h
@ -253,7 +253,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		48

-#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
--- a/include/configs/armadillo-800eva.h
+++ b/include/configs/armadillo-800eva.h
@ -47,7 +47,6 @@
 #define CONFIG_SYS_MEMTEST_START	(ARMADILLO_800EVA_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + \
 					 504 * 1024 * 1024)
-#undef	CONFIG_SYS_ALT_MEMTEST
 #undef	CONFIG_SYS_MEMTEST_SCRATCH
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE

--- a/include/configs/blanche.h
+++ b/include/configs/blanche.h
@ -32,7 +32,6 @@
 #define CONFIG_SYS_MEMTEST_START	(RCAR_GEN2_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 504 * 1024 * 1024)

-#undef	CONFIG_SYS_ALT_MEMTEST
 #undef	CONFIG_SYS_MEMTEST_SCRATCH
 #undef	CONFIG_SYS_LOADS_BAUD_CHANGE

--- a/include/configs/clearfog.h
+++ b/include/configs/clearfog.h
@ -66,8 +66,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif

-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define RELOCATION_LIMITS_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
--- a/include/configs/colibri_imx6.h
+++ b/include/configs/colibri_imx6.h
@ -228,7 +228,6 @@
 #undef CONFIG_SYS_MAXARGS
 #define CONFIG_SYS_MAXARGS		48

-#define CONFIG_SYS_ALT_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x10000000
 #define CONFIG_SYS_MEMTEST_END		0x10010000
 #define CONFIG_SYS_MEMTEST_SCRATCH	0x10800000
--- a/include/configs/controlcenterdc.h
+++ b/include/configs/controlcenterdc.h
@ -73,8 +73,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif

-#define CONFIG_SYS_ALT_MEMTEST
-
 /*
 * Software (bit-bang) MII driver configuration
 */
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@ -123,7 +123,6 @@
 #define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/cyrus.h
+++ b/include/configs/cyrus.h
@ -82,7 +82,6 @@
 #undef CONFIG_POST
 #define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x00400000
-#define CONFIG_SYS_ALT_MEMTEST

 /*
 *  Config the L3 Cache as L3 SRAM
--- a/include/configs/db-88f6720.h
+++ b/include/configs/db-88f6720.h
@ -46,8 +46,6 @@
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

-#define CONFIG_SYS_ALT_MEMTEST
-
 /*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
--- a/include/configs/db-88f6820-amc.h
+++ b/include/configs/db-88f6820-amc.h
@ -51,8 +51,6 @@
 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 #define CONFIG_SYS_NAND_ONFI_DETECTION

-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@ -66,8 +66,6 @@
 #define CONFIG_PCI_SCAN_SHOW
 #endif

-#define CONFIG_SYS_ALT_MEMTEST
-
 /* Keep device tree and initrd in lower memory so the kernel can access them */
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"fdt_high=0x10000000\0"		\
--- a/include/configs/db-mv784mp-gp.h
+++ b/include/configs/db-mv784mp-gp.h
@ -44,8 +44,6 @@
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

-#define CONFIG_SYS_ALT_MEMTEST
-
 /* SATA support */
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_LBA48
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@ -42,8 +42,6 @@
 #define CONFIG_PHY_MARVELL		/* there is a marvell phy */
 #define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII

-#define CONFIG_SYS_ALT_MEMTEST
-
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
 #define CONFIG_PCI_MVEBU
--- a/include/configs/ecovec.h
+++ b/include/configs/ecovec.h
@ -79,7 +79,6 @@
 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END	 (CONFIG_SYS_MEMTEST_START + 200 * 1024 * 1024)
 /* Enable alternate, more extensive, memory test */
-#undef  CONFIG_SYS_ALT_MEMTEST
 /* Scratch address used by the alternate memory test */
 #undef  CONFIG_SYS_MEMTEST_SCRATCH

--- a/include/configs/el6x_common.h
+++ b/include/configs/el6x_common.h
@ -82,8 +82,6 @@

 #define CONFIG_ARP_TIMEOUT     200UL

-#define CONFIG_CMD_MEMTEST
-
 #define CONFIG_SYS_MEMTEST_START       0x10000000
 #define CONFIG_SYS_MEMTEST_END         0x10800000
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@ -23,8 +23,6 @@

 #define CONFIG_HUSH_INIT_VAR

-#define CONFIG_SYS_ALT_MEMTEST		/* memory test, takes time */
-
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }

 #define CONFIG_LOADS_ECHO
--- a/include/configs/kzm9g.h
+++ b/include/configs/kzm9g.h
@ -47,7 +47,6 @@
 #define CONFIG_SYS_MEMTEST_START	(KZM_SDRAM_BASE)
 #define CONFIG_SYS_MEMTEST_END \
 	(CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
-#undef  CONFIG_SYS_ALT_MEMTEST
 #undef  CONFIG_SYS_MEMTEST_SCRATCH
 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE

--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@ -15,7 +15,6 @@
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

@ -39,7 +38,6 @@
 #define CONFIG_NET_MULTI

 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@ -16,7 +16,6 @@
 #define CONFIG_SYS_SDRAM_SIZE		0x20000000
 #define CONFIG_CHIP_SELECTS_PER_CTRL	1
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

@ -71,7 +70,6 @@
 #define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"

 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@ -15,7 +15,6 @@
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

@ -118,7 +117,6 @@
 #define CONFIG_PCI_SCAN_SHOW

 #define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff

--- a/Show More
+++ b/Show More