dra7xx: Add dra74_evm_defconfig using CONFIG_DM
Import various DT files for dra7-evm from Linux Kernel v4.2 Add config file for this board, enable DM and DM_GPIO Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Mugunthan V N
Tom Rini
parent
b9ca4ab453
commit
e5520e188b
@ -74,7 +74,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
|
||||
socfpga_cyclone5_de0_nano_soc.dtb \
|
||||
socfpga_cyclone5_sockit.dtb \
|
||||
socfpga_cyclone5_socrates.dtb
|
||||
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb
|
||||
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb
|
||||
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
|
||||
|
||||
dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
|
||||
|
||||
693
arch/arm/dts/dra7-evm.dts
Normal file
693
arch/arm/dts/dra7-evm.dts
Normal file
@ -0,0 +1,693 @@
|
||||
/*
|
||||
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra74x.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
||||
/ {
|
||||
model = "TI DRA742";
|
||||
compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x60000000>; /* 1536 MB */
|
||||
};
|
||||
|
||||
mmc2_3v3: fixedregulator-mmc2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "mmc2_3v3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
extcon_usb1: extcon_usb1 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
extcon_usb2: extcon_usb2 {
|
||||
compatible = "linux,extcon-usb-gpio";
|
||||
id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vtt_fixed: fixedregulator-vtt {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vtt_fixed";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&dra7_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vtt_pin>;
|
||||
|
||||
vtt_pin: pinmux_vtt_pin {
|
||||
pinctrl-single,pins = <
|
||||
0x3b4 (PIN_OUTPUT | MUX_MODE14) /* spi1_cs1.gpio7_11 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c1_pins: pinmux_i2c1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x400 (PIN_INPUT | MUX_MODE0) /* i2c1_sda */
|
||||
0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux_i2c2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x408 (PIN_INPUT | MUX_MODE0) /* i2c2_sda */
|
||||
0x40c (PIN_INPUT | MUX_MODE0) /* i2c2_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c3_pins: pinmux_i2c3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x288 (PIN_INPUT | MUX_MODE9) /* gpio6_14.i2c3_sda */
|
||||
0x28c (PIN_INPUT | MUX_MODE9) /* gpio6_15.i2c3_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi1_pins: pinmux_mcspi1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3a4 (PIN_INPUT | MUX_MODE0) /* spi1_sclk */
|
||||
0x3a8 (PIN_INPUT | MUX_MODE0) /* spi1_d1 */
|
||||
0x3ac (PIN_INPUT | MUX_MODE0) /* spi1_d0 */
|
||||
0x3b0 (PIN_INPUT_SLEW | MUX_MODE0) /* spi1_cs0 */
|
||||
0x3b8 (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs2.hdmi1_hpd */
|
||||
0x3bc (PIN_INPUT_SLEW | MUX_MODE6) /* spi1_cs3.hdmi1_cec */
|
||||
>;
|
||||
};
|
||||
|
||||
mcspi2_pins: pinmux_mcspi2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3c0 (PIN_INPUT | MUX_MODE0) /* spi2_sclk */
|
||||
0x3c4 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
|
||||
0x3c8 (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_d1 */
|
||||
0x3cc (PIN_INPUT_SLEW | MUX_MODE0) /* spi2_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart1_pins: pinmux_uart1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3e0 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_rxd */
|
||||
0x3e4 (PIN_INPUT_SLEW | MUX_MODE0) /* uart1_txd */
|
||||
0x3e8 (PIN_INPUT | MUX_MODE3) /* uart1_ctsn */
|
||||
0x3ec (PIN_INPUT | MUX_MODE3) /* uart1_rtsn */
|
||||
>;
|
||||
};
|
||||
|
||||
uart2_pins: pinmux_uart2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x3f0 (PIN_INPUT | MUX_MODE0) /* uart2_rxd */
|
||||
0x3f4 (PIN_INPUT | MUX_MODE0) /* uart2_txd */
|
||||
0x3f8 (PIN_INPUT | MUX_MODE0) /* uart2_ctsn */
|
||||
0x3fc (PIN_INPUT | MUX_MODE0) /* uart2_rtsn */
|
||||
>;
|
||||
};
|
||||
|
||||
uart3_pins: pinmux_uart3_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd */
|
||||
0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
qspi1_pins: pinmux_qspi1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x4c (PIN_INPUT | MUX_MODE1) /* gpmc_a3.qspi1_cs2 */
|
||||
0x50 (PIN_INPUT | MUX_MODE1) /* gpmc_a4.qspi1_cs3 */
|
||||
0x74 (PIN_INPUT | MUX_MODE1) /* gpmc_a13.qspi1_rtclk */
|
||||
0x78 (PIN_INPUT | MUX_MODE1) /* gpmc_a14.qspi1_d3 */
|
||||
0x7c (PIN_INPUT | MUX_MODE1) /* gpmc_a15.qspi1_d2 */
|
||||
0x80 (PIN_INPUT | MUX_MODE1) /* gpmc_a16.qspi1_d1 */
|
||||
0x84 (PIN_INPUT | MUX_MODE1) /* gpmc_a17.qspi1_d0 */
|
||||
0x88 (PIN_INPUT | MUX_MODE1) /* qpmc_a18.qspi1_sclk */
|
||||
0xb8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs2.qspi1_cs0 */
|
||||
0xbc (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs3.qspi1_cs1 */
|
||||
>;
|
||||
};
|
||||
|
||||
usb1_pins: pinmux_usb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
|
||||
>;
|
||||
};
|
||||
|
||||
usb2_pins: pinmux_usb2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
|
||||
>;
|
||||
};
|
||||
|
||||
nand_flash_x16: nand_flash_x16 {
|
||||
/* On DRA7 EVM, GPMC_WPN and NAND_BOOTn comes from DIP switch
|
||||
* So NAND flash requires following switch settings:
|
||||
* SW5.9 (GPMC_WPN) = LOW
|
||||
* SW5.1 (NAND_BOOTn) = HIGH */
|
||||
pinctrl-single,pins = <
|
||||
0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
|
||||
0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
|
||||
0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
|
||||
0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
|
||||
0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
|
||||
0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
|
||||
0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
|
||||
0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
|
||||
0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
|
||||
0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
|
||||
0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
|
||||
0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
|
||||
0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
|
||||
0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
|
||||
0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
|
||||
0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
|
||||
0xd8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0 */
|
||||
0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
|
||||
0xb4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* gpmc_csn0 */
|
||||
0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
|
||||
0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
|
||||
0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
|
||||
0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
|
||||
0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
|
||||
0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
|
||||
0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
|
||||
0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
|
||||
0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
|
||||
0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
|
||||
0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
|
||||
0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
|
||||
0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
|
||||
0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
|
||||
|
||||
/* Slave 2 */
|
||||
0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
|
||||
0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
|
||||
0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
|
||||
0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
|
||||
0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
|
||||
0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
|
||||
0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
|
||||
0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
|
||||
0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
|
||||
0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
|
||||
0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
|
||||
0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
|
||||
>;
|
||||
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
0x250 (MUX_MODE15)
|
||||
0x254 (MUX_MODE15)
|
||||
0x258 (MUX_MODE15)
|
||||
0x25c (MUX_MODE15)
|
||||
0x260 (MUX_MODE15)
|
||||
0x264 (MUX_MODE15)
|
||||
0x268 (MUX_MODE15)
|
||||
0x26c (MUX_MODE15)
|
||||
0x270 (MUX_MODE15)
|
||||
0x274 (MUX_MODE15)
|
||||
0x278 (MUX_MODE15)
|
||||
0x27c (MUX_MODE15)
|
||||
|
||||
/* Slave 2 */
|
||||
0x198 (MUX_MODE15)
|
||||
0x19c (MUX_MODE15)
|
||||
0x1a0 (MUX_MODE15)
|
||||
0x1a4 (MUX_MODE15)
|
||||
0x1a8 (MUX_MODE15)
|
||||
0x1ac (MUX_MODE15)
|
||||
0x1b0 (MUX_MODE15)
|
||||
0x1b4 (MUX_MODE15)
|
||||
0x1b8 (MUX_MODE15)
|
||||
0x1bc (MUX_MODE15)
|
||||
0x1c0 (MUX_MODE15)
|
||||
0x1c4 (MUX_MODE15)
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
|
||||
0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci_mdio_sleep {
|
||||
pinctrl-single,pins = <
|
||||
0x23c (MUX_MODE15)
|
||||
0x240 (MUX_MODE15)
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_default: dcan1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x3d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
|
||||
0x418 (PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
|
||||
>;
|
||||
};
|
||||
|
||||
dcan1_pins_sleep: dcan1_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
0x3d0 (MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
|
||||
0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps659038: tps659038@58 {
|
||||
compatible = "ti,tps659038";
|
||||
reg = <0x58>;
|
||||
|
||||
tps659038_pmic {
|
||||
compatible = "ti,tps659038-pmic";
|
||||
|
||||
regulators {
|
||||
smps123_reg: smps123 {
|
||||
/* VDD_MPU */
|
||||
regulator-name = "smps123";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps45_reg: smps45 {
|
||||
/* VDD_DSPEVE */
|
||||
regulator-name = "smps45";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps6_reg: smps6 {
|
||||
/* VDD_GPU - over VDD_SMPS6 */
|
||||
regulator-name = "smps6";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps7_reg: smps7 {
|
||||
/* CORE_VDD */
|
||||
regulator-name = "smps7";
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <1060000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps8_reg: smps8 {
|
||||
/* VDD_IVAHD */
|
||||
regulator-name = "smps8";
|
||||
regulator-min-microvolt = < 850000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
smps9_reg: smps9 {
|
||||
/* VDDS1V8 */
|
||||
regulator-name = "smps9";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo1_reg: ldo1 {
|
||||
/* LDO1_OUT --> SDIO */
|
||||
regulator-name = "ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo2_reg: ldo2 {
|
||||
/* VDD_RTCIO */
|
||||
/* LDO2 -> VDDSHV5, LDO2 also goes to CAN_PHY_3V3 */
|
||||
regulator-name = "ldo2";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo3_reg: ldo3 {
|
||||
/* VDDA_1V8_PHY */
|
||||
regulator-name = "ldo3";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldo9_reg: ldo9 {
|
||||
/* VDD_RTC */
|
||||
regulator-name = "ldo9";
|
||||
regulator-min-microvolt = <1050000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldoln_reg: ldoln {
|
||||
/* VDDA_1V8_PLL */
|
||||
regulator-name = "ldoln";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
ldousb_reg: ldousb {
|
||||
/* VDDA_3V_USB: VDDA_USBHS33 */
|
||||
regulator-name = "ldousb";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pcf_gpio_21: gpio@21 {
|
||||
compatible = "ti,pcf8575";
|
||||
reg = <0x21>;
|
||||
lines-initial-states = <0x1408>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mcspi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi1_pins>;
|
||||
};
|
||||
|
||||
&mcspi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcspi2_pins>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&dra7_pmx_core 0x3e0>;
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
};
|
||||
|
||||
&uart3 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&ldo1_reg>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&mmc2_3v3>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu0-supply = <&smps123_reg>;
|
||||
};
|
||||
|
||||
&qspi {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&qspi1_pins>;
|
||||
|
||||
spi-max-frequency = <48000000>;
|
||||
m25p80@0 {
|
||||
compatible = "s25fl256s1";
|
||||
spi-max-frequency = <48000000>;
|
||||
reg = <0>;
|
||||
spi-tx-bus-width = <1>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* MTD partition table.
|
||||
* The ROM checks the first four physical blocks
|
||||
* for a valid file to boot and the flash here is
|
||||
* 64KiB block size.
|
||||
*/
|
||||
partition@0 {
|
||||
label = "QSPI.SPL";
|
||||
reg = <0x00000000 0x000010000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "QSPI.SPL.backup1";
|
||||
reg = <0x00010000 0x00010000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "QSPI.SPL.backup2";
|
||||
reg = <0x00020000 0x00010000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "QSPI.SPL.backup3";
|
||||
reg = <0x00030000 0x00010000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "QSPI.u-boot";
|
||||
reg = <0x00040000 0x00100000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "QSPI.u-boot-spl-os";
|
||||
reg = <0x00140000 0x00080000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "QSPI.u-boot-env";
|
||||
reg = <0x001c0000 0x00010000>;
|
||||
};
|
||||
partition@7 {
|
||||
label = "QSPI.u-boot-env.backup1";
|
||||
reg = <0x001d0000 0x0010000>;
|
||||
};
|
||||
partition@8 {
|
||||
label = "QSPI.kernel";
|
||||
reg = <0x001e0000 0x0800000>;
|
||||
};
|
||||
partition@9 {
|
||||
label = "QSPI.file-system";
|
||||
reg = <0x009e0000 0x01620000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&omap_dwc3_1 {
|
||||
extcon = <&extcon_usb1>;
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
dr_mode = "peripheral";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb1_pins>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
dr_mode = "host";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usb2_pins>;
|
||||
};
|
||||
|
||||
&elm {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&nand_flash_x16>;
|
||||
ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
|
||||
nand@0,0 {
|
||||
reg = <0 0 4>; /* device IO registers */
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
ti,elm-id = <&elm>;
|
||||
nand-bus-width = <16>;
|
||||
gpmc,device-width = <2>;
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <80>;
|
||||
gpmc,cs-wr-off-ns = <80>;
|
||||
gpmc,adv-on-ns = <0>;
|
||||
gpmc,adv-rd-off-ns = <60>;
|
||||
gpmc,adv-wr-off-ns = <60>;
|
||||
gpmc,we-on-ns = <10>;
|
||||
gpmc,we-off-ns = <50>;
|
||||
gpmc,oe-on-ns = <4>;
|
||||
gpmc,oe-off-ns = <40>;
|
||||
gpmc,access-ns = <40>;
|
||||
gpmc,wr-access-ns = <80>;
|
||||
gpmc,rd-cycle-ns = <80>;
|
||||
gpmc,wr-cycle-ns = <80>;
|
||||
gpmc,bus-turnaround-ns = <0>;
|
||||
gpmc,cycle2cycle-delay-ns = <0>;
|
||||
gpmc,clk-activation-ns = <0>;
|
||||
gpmc,wait-monitoring-ns = <0>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
/* MTD partition table */
|
||||
/* All SPL-* partitions are sized to minimal length
|
||||
* which can be independently programmable. For
|
||||
* NAND flash this is equal to size of erase-block */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
partition@0 {
|
||||
label = "NAND.SPL";
|
||||
reg = <0x00000000 0x000020000>;
|
||||
};
|
||||
partition@1 {
|
||||
label = "NAND.SPL.backup1";
|
||||
reg = <0x00020000 0x00020000>;
|
||||
};
|
||||
partition@2 {
|
||||
label = "NAND.SPL.backup2";
|
||||
reg = <0x00040000 0x00020000>;
|
||||
};
|
||||
partition@3 {
|
||||
label = "NAND.SPL.backup3";
|
||||
reg = <0x00060000 0x00020000>;
|
||||
};
|
||||
partition@4 {
|
||||
label = "NAND.u-boot-spl-os";
|
||||
reg = <0x00080000 0x00040000>;
|
||||
};
|
||||
partition@5 {
|
||||
label = "NAND.u-boot";
|
||||
reg = <0x000c0000 0x00100000>;
|
||||
};
|
||||
partition@6 {
|
||||
label = "NAND.u-boot-env";
|
||||
reg = <0x001c0000 0x00020000>;
|
||||
};
|
||||
partition@7 {
|
||||
label = "NAND.u-boot-env.backup1";
|
||||
reg = <0x001e0000 0x00020000>;
|
||||
};
|
||||
partition@8 {
|
||||
label = "NAND.kernel";
|
||||
reg = <0x00200000 0x00800000>;
|
||||
};
|
||||
partition@9 {
|
||||
label = "NAND.file-system";
|
||||
reg = <0x00a00000 0x0f600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
phy-supply = <&ldousb_reg>;
|
||||
};
|
||||
|
||||
&usb2_phy2 {
|
||||
phy-supply = <&ldousb_reg>;
|
||||
};
|
||||
|
||||
&gpio7 {
|
||||
ti,no-reset-on-init;
|
||||
ti,no-idle-on-init;
|
||||
};
|
||||
|
||||
&mac {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
dual_emac;
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <2>;
|
||||
phy-mode = "rgmii";
|
||||
dual_emac_res_vlan = <1>;
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <3>;
|
||||
phy-mode = "rgmii";
|
||||
dual_emac_res_vlan = <2>;
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
status = "ok";
|
||||
pinctrl-names = "default", "sleep", "active";
|
||||
pinctrl-0 = <&dcan1_pins_sleep>;
|
||||
pinctrl-1 = <&dcan1_pins_sleep>;
|
||||
pinctrl-2 = <&dcan1_pins_default>;
|
||||
};
|
||||
90
arch/arm/dts/dra74x.dtsi
Normal file
90
arch/arm/dts/dra74x.dtsi
Normal file
@ -0,0 +1,90 @@
|
||||
/*
|
||||
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
* Based on "omap4.dtsi"
|
||||
*/
|
||||
|
||||
#include "dra7.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "ti,dra742", "ti,dra74", "ti,dra7";
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu0: cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <0>;
|
||||
|
||||
operating-points = <
|
||||
/* kHz uV */
|
||||
1000000 1060000
|
||||
1176000 1160000
|
||||
>;
|
||||
|
||||
clocks = <&dpll_mpu_ck>;
|
||||
clock-names = "cpu";
|
||||
|
||||
clock-latency = <300000>; /* From omap-cpufreq driver */
|
||||
|
||||
/* cooling options */
|
||||
cooling-min-level = <0>;
|
||||
cooling-max-level = <2>;
|
||||
#cooling-cells = <2>; /* min followed by max */
|
||||
};
|
||||
cpu@1 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a15";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
pmu {
|
||||
compatible = "arm,cortex-a15-pmu";
|
||||
interrupt-parent = <&wakeupgen>;
|
||||
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
ocp {
|
||||
omap_dwc3_4: omap_dwc3_4@48940000 {
|
||||
compatible = "ti,dwc3";
|
||||
ti,hwmods = "usb_otg_ss4";
|
||||
reg = <0x48940000 0x10000>;
|
||||
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
utmi-mode = <2>;
|
||||
ranges;
|
||||
status = "disabled";
|
||||
usb4: usb@48950000 {
|
||||
compatible = "snps,dwc3";
|
||||
reg = <0x48950000 0x17000>;
|
||||
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
|
||||
tx-fifo-resize;
|
||||
maximum-speed = "high-speed";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&dss {
|
||||
reg = <0x58000000 0x80>,
|
||||
<0x58004054 0x4>,
|
||||
<0x58004300 0x20>,
|
||||
<0x58005054 0x4>,
|
||||
<0x58005300 0x20>;
|
||||
reg-names = "dss", "pll1_clkctrl", "pll1",
|
||||
"pll2_clkctrl", "pll2";
|
||||
|
||||
clocks = <&dss_dss_clk>,
|
||||
<&dss_video1_clk>,
|
||||
<&dss_video2_clk>;
|
||||
clock-names = "fck", "video1_clk", "video2_clk";
|
||||
};
|
||||
17
configs/dra74_evm_defconfig
Normal file
17
configs/dra74_evm_defconfig
Normal file
@ -0,0 +1,17 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_OMAP54XX=y
|
||||
CONFIG_TARGET_DRA7XX_EVM=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="dra7-evm"
|
||||
CONFIG_SPL=y
|
||||
CONFIG_SPL_STACK_R=y
|
||||
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
||||
# CONFIG_CMD_IMLS is not set
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_CMD_SETEXPR is not set
|
||||
# CONFIG_CMD_NFS is not set
|
||||
CONFIG_OF_CONTROL=y
|
||||
CONFIG_SPL_DISABLE_OF_CONTROL=y
|
||||
CONFIG_DM=y
|
||||
CONFIG_SPI_FLASH=y
|
||||
CONFIG_SPI_FLASH_BAR=y
|
||||
CONFIG_DM_GPIO=y
|
||||
Loading…
Reference in New Issue
Block a user